The DJI Air Unit O3 CAMERA SETTINGS You Need to Know. 

Let me know please what are your settings for DJI O3 Air Unit. Are you using filters? If so what brand?

Thank you for this video. It was useful. I just started using o3 for the first time today, and I need these settings!

Hi mate! Thanks for informative video. Have a nice day 👊

Thanks man

hey Planet in the Lens!!! fantastic tutorial, you look very professional in front of the camera!! I have very similar settings, although I limit ISO 800, noise reduction -1, and sharpness 0. I have to test your parameters. Very good work!!😊👌

Thank you so for sharing will try these settings once I finish my long range build with 03.. New sub from Scotland ( your English is very good better than my Polish ) 🤙

Super

All you need to know . Thanks !

Powodzenia, good luck.

Hey my friend, awesome tutorial! Quick question: when you're color grading, do you opt for "DJI D-Gamut" as the color space and "DJI D-Log" as the gamma during the color transform process? And for the codec, do you opt for h264 or h265 ?

Very useful video thank you very much ! I have DJI unit 03 and I'm using it on my airplane when I record a video the airplane is moving unproportionally towards the horizon ! how to turn it off and make it solid ? Thank you

So, the video feed recorded onboard the O3 air unit and the video feed displayed in the goggles are separate, correct? For instance, if I set the recording to 4K at 24fps onboard, the goggles will always display at 1080p with a full 100Hz refresh rate, right?

Witam, zapodalem dziś rekomendowne ustawnia i dość ladnie to wygląda, tez pogoda byla lepsza. Dzięki, narazie zostawie je jako standard. Jedynie be D-cinelike, za leniwy jestem by kolorować, no chyba ze fajnie luty znajdę. Pozdrawiam i dzięki

I will definetly try these settings. I have the v2 goggles. These settings are what you tmrecord right? Can you also change the transmission settings? For lowest possible fps and latency?

Hi, thanks for the information. How do I activate the recording in the air unit?

Personally, I didn’t mess too much with the settings on my camera. But my color is really pop. Naturally, the grass looks really lush and green in my videos. Flowers pop.

I find the O3 normal color profile to work best with +0.3 or +0.7 exposure depending on the time of day. It tends to under expose the shadows so this solved that.

Cześć. Jakie ustawienia nocne polecasz żeby dobrze widzieć podczas lotu i zarazem żeby coś z tego obrazka wyciągnąć w postprodukcji ? Pozdrawiam ✌️

Hi! What power needs to set in Betaflight for DJI o3 Air unit (25/200/400/800)? There are no one option selected in "Power" select by default. I fly with SpeedyBee Master 5 V2 and DJI google's Integra. Video signal is lost at the distance about 300 metres.

One Question cause I cant seem to find out : Is it possible to make photos during flight with the remote (same as if you would use the avata) ! Thanks for your answer :-)

I just built my 1st 6s 5 inch freestyle quad and put my first o3 air unit in it. I only have 1 6s battery right now so I just test flew it, but the problem I had was my V2 goggles didn't record the DVR from the air unit. If I go into the settings and have it play Last Image Before Video Loss, I get the last about 10 or 20 seconds of video before I disarmed at the end of the flight. When I plug the Air Unit into USB-C on my computer I get the folders where the video should be, but the folders are empty. Do you know if this is a problem with the V2 DJI goggles? It looks like you have the Goggles 2 and not the older V2 goggles, so you may not have this problem.

Hi, I don't speak English, is it the same configuration for the Avata? Thank you!!! 👍

Hey there, I've been closely following your content, and I've noticed that we both use similar drone settings. Recently, while trying to capture a cinematic shot moving from the forest canopy upwards to the sky and then diving back down, I've been encountering a frustrating exposure switch issue. It seems to disturb the fluidity of the shot. While watching your recent video, I noticed that you seem to face a similar challenge. Have you given any thought to this? Do you believe shooting in manual might be a potential solution to avoid that abrupt exposure change? I'm genuinely curious about your take on this since we're in the same boat. Looking forward to hearing your thoughts on this. Keep up the great work!

what lens profile did you use in gyroflow?

Bellissimo tutorial 😊 io ho notato una cosa della O3 rispetto alla gopro... Mantiene le immagini molto scure

Hi! Those all settling available on V2 too? Sharpness and noise

for ISO Range on auto i seem to have a issue it doesn't adjust itself any reason i just got the pre-build drone ?

Super materiał. Wiedziałeś że ustawienie redukcji szumów na - znacznie poprawia bitrate? :)

All looks very good. I have a dji air unit that wouldn't show a picture in my goggles. I put another one in the drone and it worked so no issues with setup or wiring of the quad. I put the the first one back in and nothing. I took the antennas off (under a fan) and powered it up and there was a picture again. Plugged the antennas back in and powered up and no picture again. They are original dji antennas. I did this ten times and the result was the same every time. Anyone have any idea what is going on? Thanks.

Are you able to use ReelSteady to stabilize the footage?

Wow, I haven't expect you "here" 😊

hi , if we use ND filters , can we block the shutter ?

hi buddy. cant find shutter speed setting as i saw you didnt have them ether. how do you find it?

HI how you could record the footage from the O3 Air Unit?

Please tell me how to change shutter speed? I cant find this option.

👏👏👏👍

Can o3 air unit do vertical video dji

How does your footage look so good. Mine is really bad

isnt it a bit dark?

FYI 100FPS gives the lowest latency regardless of any other settings

Is it me or is this video footage mighty dark?