The EASIEST EV Charger To Install... OR IS IT??

Подписаться 15 тыс.

Просмотров 23 тыс.

50% 1

Today I installed an Ohme EV charger, as usual I faced challenges with the cable route, other than that, this may well be the easiest EV charger to install....OR IS IT??
Hope you enjoy!!
Join the SOTA Team!! Click the link below if you would like to support my channel, I have different levels of memberships set up ranging from a kind gesture to one to one help that I can provide you with.
/ @sotaelectrical
BUY SOTA A COFFEE!!
Thank you for all of your support, I am worn out and I am relying on caffeine at the moment, if you want to support my new addiction, a coffee would be much appreciated and I will love you forever.
buymeacoffee.c...
Merry Christmas Everyone.
DON'T FORGET TO LIKE MY VIDEO AND SUBSCRIBE TO MY CHANNEL!!
(PLEASE) :)
WHO AM I:
I’m Adam the electrician based in the south of England (Portsmouth).
I make videos that show my everyday working life installing EV charging points along with other electrical installations hopefully sharing some useful information and tips.
GARAGE INSTALL VIDEO WITH A DUCT!!
• I took on an IMPOSSIBL...
Check out my previous video, there epic!!
INTERNET WALKTHROUGH
• THE ONLY Zappi video Y...
AMAZON BAN
• From HOPE to DESPAIR: ...
• Turning Nothing into S...
Please also find and follow us on facebook, instagram and TikTok!!
/ sotaelectricalservices
/ sota.electrical
/ sotaelectrical
This video is for entertainment purposes only.
#ev #electricvehicle #evcharger #electrician #house #home

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 82

@WombleUK 5 месяцев назад

The other good thing with them drill dust extractors is they help give you a nice 90° drilled hole & it is nicer to not have the little piles of dust everywhere 😉

@geew2993 3 месяца назад

Like your enthusiasm, I’m having an Ohme epod installation this Thursday in Kent. Be great if it was you .

@sotaelectrical 3 месяца назад

Thank you sir 👍👍

@johnbyrne5726 7 дней назад

Loved this, informative as well as entertaining! Quick question: can the EV charger connect directly to the Meter Box? (Our Consumer Unit is well hidden inside the house!)

@sotaelectrical 6 дней назад

It can be installed from the meter by installing a secondary consumer unit👍👍

@shiamjad 6 месяцев назад

I like your detailed description of everything you do...5 stars

@sotaelectrical 6 месяцев назад

Thank you 👍

@jackmarsh6398 4 месяца назад

Also, putting a screw and penny washer in the top of the plug holder stops the top piece sagging

@NickF76 8 месяцев назад

Thanks for the video. I am looking at my first EV. I am on a looped supply and the consumer unit and meter are in the middle of the house. So this and your looped video have helped. I have a consultation next week with the installer (i live near manchester - so a bit far for you to travel) fingers crossed they are as informed as yourself.

@jsouto77 9 месяцев назад

Thanks for filling my stocking....You have a Merry Christmas too :)

@sotaelectrical 9 месяцев назад

Thank you buddy 👍👍

@markyd2633 9 месяцев назад

Mate...that was a great vid.......nice editing.....getting better every time What was the total time taken to install the charger? Have a great xmas

@sotaelectrical 9 месяцев назад

Hi mate thank you so much, it took about 4/5 hours, it would be way quicker if I didn’t video it, but I like making videos 🤣 Have a great Xmas also!!

@kingsaf3998 9 месяцев назад

Happy Xmas and new year, already looking forward to next years uploads.

@sotaelectrical 9 месяцев назад

Happy Xmas and best wishes to you also for the new year!! Thanks for watching my videos consistently, appreciate your support. 👍👍👍

@SoraaConstruction-zl9ww 9 месяцев назад

Great video. Enjoy a well deserved break 🍻🍻

@sotaelectrical 9 месяцев назад

Thank you, hope you have a good Christmas and best wishes for the new year 🍺🍺

@richard_in_rayleigh 9 месяцев назад

Great video. Did you really forget you'd installed the consumer unit previously or was that just for the camera? Anyway, have an awesome Christmas. Take care.

@sotaelectrical 9 месяцев назад

Thank you, lol that was my lame attempt of being funny, have a great Xmas also!! Take care buddy 👍👍

@pikricky 9 месяцев назад

Another good one,have a great Christmas

@sotaelectrical 9 месяцев назад

Thank you, you too!! 👍👍

@BillsCountrysideAdventures 7 месяцев назад

New subscriber mate, loving the videos. I have just had ohme pro, but don't think the bracket is very pro with 8m of cable. Saying that the app and setup is good.

@sotaelectrical 7 месяцев назад

Hello mate, thank you for subscribing!! Much appreciated!! Yes the bracket is a bit flimsy for 8m of cable 👍👍

@DTech101 9 месяцев назад

Great Job mate! That holder to release the charger plug is the best thing, I used it on my Indra Lux it finishes it off well and makes for a neater install compared to the holder and rubber boot that still allows water ingress think Indra dropped the ball on that one. Ohme is by far the best integration with Octopus 🐙 a mate of mine has it and it can do the dual tariff ie it knows when your charging at the lower price of the tariff in the day time outside of the set hours and give you the price of the charge accordingly, although Octopus 🐙 schedule the charge on Indra. Indra still associate any charge outside of the set times as peak rate and displays it on the app as peak rate even though Octopus 🐙 Automated the charge schedule. Indra seem at a loss as how to implement this like Ohme have got told they will look to update in the next firmware update. Ohme is by far the star of integration but ugly in the looks department IMHO especially if it has to be installed at the front of the house.

@sotaelectrical 9 месяцев назад

Thank you mate, and thanks for your comments, good info there for sure!! Hope you have a lovely Xmas!!

@DTech101 9 месяцев назад

@@sotaelectrical you to bud, at least you get a couple days break from work lol, have a good Crimbo mate

@sambrown4053 4 месяца назад

Nice work. Where did you get your roll out mats?? Great idea

@sotaelectrical 4 месяца назад

Thank you!! I got the mats from a website called ‘stickersnthat’

@femigeorge7641 2 месяца назад

Great video, I have a similar situation with the consumer unit in the middle of the house, what would my options be if the bungalow has a concrete floor?

@sotaelectrical 2 месяца назад

Go through the loft

@Riley_Jarvis_the_sparky 9 месяцев назад

Merry Christmas to you mate

@sotaelectrical 9 месяцев назад

Thank you mate, and to you 👍👍

@ljft4790 8 месяцев назад

I use the same external connection box as you so I'm curious: do you use the included terminal block or something else more robust. As always, it's interesting to hear what others are using. Many thanks.

@BULLEAD 9 месяцев назад

You seem to install a wide range of different brand chargers. Have you had some supplier specific training from all of them ?

@sotaelectrical 9 месяцев назад

Hi mate, yes I do offer a wide range and I do all the supplier training for all the brands

@lachyjames8629 7 месяцев назад

No fire clips under the floor?

@sotaelectrical 7 месяцев назад

Why would fire clips be required under a floor?

@TFSELECTRICAL 9 месяцев назад

Merry Xmas bro

@sotaelectrical 9 месяцев назад

Thanks bro you too 👍

@finchyfun1 3 месяца назад

Just wondering, do you do any EV installation for Mobility. We will be getting a free standard installation by Mobility when we order our first EV. Just hope the election are as good as you.

@sotaelectrical 3 месяца назад

I don’t but I can I guess?

@jamiei543 9 месяцев назад

Have an Ohme charger installed. Not a massive fan of it always looses its internet connection from the mobile sim that it uses and sometimes requires a power down to fix this and whilst it has no internet the option of authorizing charges does not work meaning any one can use the charger. The CT clamp on my one also doesnt work and so i have had to turn load balancing off as it was stuck at low charge speeds and the CT clamp makes a loud noise tried to call Ohme several times but can never get through to them left several voicemails to call back and have heard nothing.

@sotaelectrical 9 месяцев назад

Hi Jamie, Thanks for your comments, one thing I also do is check the 4G connection at the property before installing an Ohme, it’s a shame your having this issue. I would maybe suggest contacting your installer (if it’s Ohme then I understand you have tried to contact them) and get the CT connections checked out, should be an easy fix. Thanks for watching and best wishes for Xmas! 👍

@jamiei543 9 месяцев назад

thanks and yes the CT clamp is an easy fix think i know what the issue is the installer used 1 pair of CAT5 per CT wire meaning each wire to the CT has 2 cables which wont be helping things will probably end up redoing these connections after xmas when i have time and seeing if that gets the CT to start working@@sotaelectrical

@SirTerabyte 6 месяцев назад

I couldnt tell from the video but was the ethernet cable routed with the armoured cable? It looks like they are both coming out from one cable.

@sotaelectrical 6 месяцев назад

It’s called an EV Ultra cable and the CAT5 is integrated with it 👍👍

@JayG2K 8 месяцев назад

whats the diameter of the ev cable, would the jokari stripper just do the same job? 8-28mm

@Tamil.o.Official Месяц назад

I have a Ohme 7.4kW ePod Home EV Charger Type 2 in black, which does not have an electronic display and is very standard. I have been using it for the last six months, and I didn't set up Timber, just charged manually. However, for the last few days, there has been a problem. Sometimes it turns on, and after a few seconds, it shuts down. The lighting display also shows different colors than it used to. I need to know if this is an issue with the EV Charger or the consumer unit supplying the electricity.

@sotaelectrical Месяц назад

sounds like you need someone to pop out and take a look to be honest.

@Tamil.o.Official Месяц назад

@@sotaelectrical someone resolved to my Q - I have a Ohme 7.4kW ePod Home EV Charger Type 2 in black, which does not have an electronic display and is very standard. I have been using it for the last six months, and I didn't set up Timber, just charged manually. However, for the last few days, there has been a problem. Sometimes it turns on, and after a few seconds, it shuts down. The lighting display also shows different colors than it used to. I need to know if this is an issue with the EV Charger or the consumer unit supplying the electricity.

@AndyWillis-b1g 9 месяцев назад

Hi pal how do you get on with testing the built in RCD as I’m like you and fitted one upstream to protect cable but during testing it trips the upstream RCD instead of the built in one … I had to temporarily fit and MCB first to get round this cheers

@jackmarsh6398 4 месяца назад

Mate, just go under the floor yourself. There is plenty of space down there. It would take 5 mins to complete the cable run.

@MegaSkengman 8 месяцев назад

How much do you charge for the ohme on a standard install?

@mikebrooks9854 9 месяцев назад

Always great videos 😊 Merry Christmas 🎅 Did you have to do the C&G 2921-31 to install electric vehicle charger points?

@sotaelectrical 9 месяцев назад

Hi Mike, you should but no one is policing what courses you do, I would advise it though!! Merry Xmas to you too and thank you for watching mate 👍👍🍺

@andrewwest8418 4 месяца назад

Hi, looking at getting a EV but I know my fuse board hasn’t any spare space available so every trip switch is connected to something around the house (lights,sockets, Outdoor sockets etc) does that mean I need a new bigger fuse box fitted or can something be done to free a space up for the EV charger to be wired into? As I want to faction all of these things in to the cost of moving over to a EV. Thanks

@sotaelectrical 4 месяца назад

I would either suggest replacing the existing one or leave it alone and put in a new separate consumer unit for the charger 👍

@andrewwest8418 4 месяца назад

@@sotaelectrical thank you for the reply. Price wise would doing it that way be cheaper as well as less hassle? Any idea a rough figure to look at doing this I appreciate it’s depending on area etc I’m in the Thames Valley area UK.

@sotaelectrical 4 месяца назад

@@andrewwest8418 cheaper and less hassle to put in a separate consumer unit for sure!! Price wise I won’t discuss on here, fuel for an argument

@benjames3959 6 месяцев назад

Are your rods 5metres long each?

@shopsmile9336 9 месяцев назад

How much does this cost in total?

@sotaelectrical 9 месяцев назад

I won’t reveal work prices on here, I always get hate from someone and it’s so unnecessary

@glideman 7 месяцев назад

Why install the box so low? The customer is going to have to be on hands and knees to read it 😂

@sotaelectrical 7 месяцев назад

Regs mate

@mikejackson1383 9 месяцев назад

Sound is poor!

@sotaelectrical 9 месяцев назад

Hi Mike, sorry can you elaborate so I can try and improve, I’m pretty thorough so interested to know what you mean?

@mikejackson1383 9 месяцев назад

Volume seems really low I have to turn my volume up to max on your videos.

@sotaelectrical 9 месяцев назад

@@mikejackson1383 ok note taken, sorry about this

@BerkeleyTowers 9 месяцев назад

Sounds good to me. Haven’t had to adjust the volume from a session watching lots of other stuff.

@alanr585 8 месяцев назад

Yeah, you seen to have the mic in a good position but yes low and lacking in the high frequencies.

@FFT_Electrical 9 месяцев назад

You are so 100% on those bl00dy screws, guaranteed to snap if you try and back them off

@sotaelectrical 9 месяцев назад

They are the worst screws ever!! Merry Xmas mate 👍👍

@Blackf1ngers 9 месяцев назад

It riles me when people complain about people doing things better than they absolutely have to. Clearly their MO is to do the minimum they can get away with. I do Ohme's all the time and there's no way I would leave the wiska box connections/wagos unprotected, especially if they are internal.

@sotaelectrical 9 месяцев назад

Absolutely agree with you mate, thanks for watching and have a great Xmas!! 👍👍

@AndyWillis-b1g 9 месяцев назад

@Davidhughes9467 5 месяцев назад

Any preference on what charger you install?

@sotaelectrical 5 месяцев назад

I like the Simpson and partners, zappi, Ohme the most at the moment 👍

@Davidhughes9467 5 месяцев назад

@@sotaelectrical Thanks for reply Ive only installed one easee, and I've got another 2 to fit debating what to use client doesn't mind what he has, I found the easee nice to install seemed basic tho but have nothing to compare against.

@sotaelectrical 5 месяцев назад

@@Davidhughes9467 if your customer wants something nice looking, go for the Simpson & Partners, if they have solar, install. Zappi, if they don’t and they are on octopus intelligent - install a Ohme that’s my kind of rule of thumb

@Davidhughes9467 5 месяцев назад

@@sotaelectricalok great thanks for this info much appreciated mate 👍