The Greatest Mystery, Solved. Recreating Ancient Stone Melding Technology (Part 1) 

So this hypothesis raises more questions than it answers. * Where did they get enough power? * Why do we not have physical or graphical records of the power sources? * How did this technology get transferred all around the globe and then get lost? * Most rock is an insulator. How do they create a plasma arc between the electrodes? * Assuming they can melt the rock, how to they prevent spattering? * How do they keep the rocks from melting together? * Wouldn't molten rock pool from gravity? * Why can't they eliminate the nubs while the rock is still soft? * If they can create air pockets inside the rock, why didn't they do that to pyramidal stone blocks? Probably a lot more questions. This is what I came up with in about a minute.

You keep saying "I have discovered". There is a difference between discovering and theorizing. At the moment, you have a working theory that may or may not be correct. Show us in practical application and then you can say that you have discovered how it is done.

The biggest question that needs to be addressed is what source of electricity did ancient people use to generate the plasma? Furthermore, how did they compress the air necessary to create plasma? Your story leaves a lot of unanswered questions.

The rods in the Great Pyramid Queen's chamber shaft are not a mystery. They were used by the Edgar brothers to probe the shafts after they were opened in the 19th century, and some of the rods got stuck on the bends in the shaft and broke off, so they could not retrieve them.

Many of these holes, especially in Rome were for the mounting of marble facades.

In the Roman era, stone blocks were fitted with iron pins to help lock them into place. After Rome fell, during the dark ages, iron was scarce, and people began digging into the stone blocks, to extract the pins. That is why many buildings, like the colloseum, have all those pock-marks. I'm not certain as to the reason for some of the other marks, where that is not the obvious explanation.

OK, then meld a stone and show us the results.

Ok, say they had electric power and were able to create plasma. Even then: This needs not only "power", it needs a lot of it and for a long time. I am not convinced.

at least someone is working on it and trying to solve the ancient tech secrets. Shows how clever the ancient people are.

If stones would be melded and casted into shapes, then many stones would have the exact same shape. Because the same forms would be used over again. As a stonemason I know these typical holes as slots where something, especially wooden structures or ornaments, have been fitted in after the building was already done. You will find these in thousands of medieval castles. You will also find other kinds of holes and stubs there. They were used to create places, where the lifting devices were used.

Interesting indeed. I look forward to seeing more data from further experiments. Thanks!

Lifting large, finished edge stones would most surely have a tendency to cut the fiber ropes of the time with ease, or just plainly get in the way underneath the stones when placed, so I can't help but logically believe that the "nubs" were used for the ropes to be tied or slung for precise applications. The "Holes" could've simply been scaffolding mounts or used with iron rods for the purpose of lifting the finished stones into place. We should look into if the "Nubbed" stones were favored in an area with less iron access or smelting experience, or it would also make applicable sense that the "Nubbed" stones pre-date the stones with precision drill holes in them. Or not.... just my opinion.

I found hexagonal holes and a metal line that looks similar to a gas line near some broken cliff faces of the grand canyon. Would be happy to share the pics if you're interested in looking.

This technique makes the most sense. I would love to see a real rock melting experiment like this. Thanks for sharing!

For years I’ve thought that the oddly shaped blocks of stone in the walls in South America and elsewhere look as though they’d been moulded, like plasticine, but I couldn’t think how. Thanks for the information!

This is the best explanation of ancient technology I've seen in the last decade of researching ancient enigmas. You should get on a podcast with people like randall carlson, Graham Hancock, Lacroix.. etc etc.

The power source is obviously the big question, and how they made plasma. I'd really love to see this work out with modern equipment. Duplicating the old techniques and technology would be very interesting, but now we probably have better materials and stuff to do it even better than before. Making those stones is one thing, moving them is another but we have machines now. I want to see this happening. And I want you to survive showing us.

I believe that all these blocks are poured in place or on site. The holes you see are for tie-rods to stop the forms bursting open.

Where did they get their electronic? And the steel rods? With them being in the bronze age.

Pyramids used for pulling energy from the earth or more likely atmospheric energy, possibly a combination of multiple sources and methods. It sure does help explain those giant stone “sarcophagus”, which where likely capacitors of some sort. And why so many of these megalithic sites look like circuit boards from above. Great video! Thank you.

This is awesome! It is great to see someone testing their theories in the real world... All those holes and nubs are a problem that needs to be solved- I appreciate what you are doing!

Where's the test? Can you make a big rock melt?

Thats probably the best explanation ive see yet. Who knows what capabilities the master builders had with electrodes, frequencies etc..as they were the experts, here the scientist is in early experimentation. I def think its a high possibility tho. Good job

I see two problems here. one, many of the sites contain huge stones that would have required massive equipment just to melt the stones. Then there's the issue of how they formed them after melting. Why do we not find any such molding equipment? Two, the electrical generation equipment would have to have been massive to generate high enough voltage to accomplish large scale melting of stone. Then there's the technology required to build such equipment. There are no signs anywhere of such equipment or any sites where they might have been used. Lastly, why hasn't this been used in modern times to conveniently shape stone for use?

Finally someone else has this theory, and has the background in plasma and high voltage experience to tire so many details together. Looking forward to seeing more.

You're on to something here, I have been working on similar ideas but was having problems applying HF HV to stone in a controlled manner, the idea of electrode holes should solve that. Thank you for pointing out the importance of the electrode cross section shape!

Great finding, I saw in an other vlog how they’re melting Basalt at 2400 degrees and poured it in a sand casing. Mesmerizing, Anyway great to see all different experts, researchers and hobbyists looking for the true meaning behind all these great mysteries.👍🍀thnx for your part.

That makes more sense than anything they've taught me in school

The nubs are always in pairs and they're always an arms length away.

Amazing discovery. Will share with community

I have seen an anomalous artifact that is a piece of granite with metal prongs coming out of it, very much like electrical plugs we use today. I think it is in a video amongst things that come from coal and deep places, geologic strata they are not supposed to be in. This is a very interesting video and I always did think that the stone surfaces we see now, would have been covered by any number of things, possibly even gold, silver, bronze, etc. I had not realized that buildings had so many holes in them, probably thanks to video editing and also 'restoration'. I think it was a resonance factor, when lifting the stones

Your hypothesis has tremendous potential & I enjoyed your presentation, I look forward to seeing more of your work. 🤠

Good theory. How did they cut the stones in the first place? Why don't all of the building stones have electrode holes in them? How did they drill the holes in a hexagonal shape? .......just wondering.??

Very interesting, thanks for making your work public!

Imagine what all those places like that around world looked like new

So many puzzling details but fantastic theory, brilliant ideas - Lets work these issues through - I definitely believe you to be heading the right way

I do appreciate the hands on effort and there needs to be more of that. However I have a couple issues. First of all, granite can not be melted. At least not in the sense of a producing some moldable or mushy consistency and then expect it to "set" in a mold, or a form, or even a nice glob on the ground. There won't be any globbing, or moldable version of granite whatsoever. There's only granite, exploding granite, and in the end you will have just crumbling granite that can not be reconstituted in any way. I suppose it could be ground up and a binder added...but then your back at geopolymers again. Second, there has not been one inch of copper wire found anywhere, in all the world. Or gold wire or bronze, or orichalcum....or wire made of anything that could possibly carry even a small current. This is why I never held much faith in the "Bagdad battery". Because they aren't much more than a potato battery with very low voltage and negligible current, but there STILL isn't any wire found or anything that could be used as conductors....definitely no high voltage conductors. So no power tools, no electro plating, not even a potato battery. That's not to say everything is as we've been told, or as it seems. It's not that we know how everything worked, with our big ol' modern brains, either. Not at all. Just make it make sense.

I find the content very interesting and hope to watch more when available.

You do realise, to build the Pyramids or other large stone structure, one would have to build a power generator larger that the Pyramids itself to be able produce enough power to "melt stone". How long do you plan on dragging out this series? You'd better wrap it up on the next video, the Townsfolk are gathering torches and axes as we speak.

That is the best theory I have heard yet. Thank you!

There are hands and feet impressed into the "rock" in many places with this melted look. Must be cold when was touched. May be a kind of solvent which turns the rock into something that behaves like clay or plasticine.

That's the most plausible explanation I have heard for softening rock used in the megalithic structures. Well thought out.

Dude this theory leaves a lot pf questions, but gives a lot of answers… very interesting, thanks for your efforts! Keep going!

Cool! I’ve been thinking something similar; super heated carbon rods; like a heliarc. This is way better with the anti grav effect. Outstanding!

Nice video really good theories, but I haven’t seen you actually prove anything except for you can create a very bright light

That's excellent. You can also make objects lighter by changing its resonant frequency.

In the Old Testament, the Ark of the Covenant was carried by wooden poles and anyone who touched the Ark would instantly die.

Good work, this goes a long way towards explaining the megalith mystery. Looking forward to your power source research.

I love that you passionately believe in your work. I subscribed, because I fully agree with what you've said so far. Please keep on. Your baby steps will one way or another contribute to better understranding. You don't have to have all the answers at the moment. I'm sure your work will pave the way.

Fair play to you for putting so much effort in

That was a fantastic theory definitely seems completely possible now if only the power source was realized. An those long rods in the pyramid shafts are from when some guys i cant recall the names tried finding a way to tell where the shafts headed . Not ancient rods left behind .

We should try to extract the hexagonal rod found in the Queen's chamber and analyze it as a first step in proving your theory. Good observations so far!!

Something you'd need to see done to believe. I thought that'd what I was going to observe.

This is fantastic, everyone needs to see this

Overall, a nice theory. But I think what is lacking is the actual analysis of the stones themselves. I recently watched a lot of evidence presented by a French chemist, who discovered organic materials embedded in the "stone"that was considered to be diorite. The only reasonable way to explain the presence of organic materials that would have ever been destroyed by high heat is that they were actually a biopolymer that was a soft clay, added to incrementally and pressed into place. This explanation resonates well with the evidence for many sites but not all of them. The biggest exception to this is balbec in Lebanon. Those sandstone blocks that were moved defy modern explanation and were most definitely not made of clay. But many of the stones if not all of the stones in Cusco bear this mark of organics.

Fascinating. I have a question, wouldn’t all this electrical discharge be dangerous for those people working the stone.

It'd be interesting to see if Edward Leedskalnin also used high voltage, high current to shape and move the rocks of his Coral Castle.

Excellent work Sir!! 👏👏

Fantastic research dude. We have all wondered about this and you apparently solved it , I have believed the rock became plastisized somehow and anti-grav thru a variety of frequncies resonating, then move in place.

Fantastic work mate thank you big times ⚡️⚡️⚡️⚡️

Excellent work you're doing.

Thank you for your works in bringing these to light. And let not anyone turn on you. We have had enough of numb knowledge for long enough

Thank you for your genius level approach. It makes sense, and, likely makes the ears of those afraid of such findings, stand up. Breaks their reality, worries many I am sure. Worked with HV, familiar to me. I'll look at kickstarter. Keep care. Use great discernment in choosing who you work with and publishing findings to as many people as possible.

The structure of granite can is deformed by heat cycles. If these rocks were heated as you say, they should be able to analyze pieces and verify that.

I see many people trying to disagree with @MadPlasmatist by offering what they think is "logical arguments", but its quite clear from their responses that many have never visited and examined (=carefully observed) megalithic monuments. The assumption of the exact era of construction is not valid, as well as the assumption of the technological knowledge of that time. Please keep in mind not only that stone can NOT be dated, but also that any dating that falls outside the boundaries of the mainstream archaeological beliefs is officially immediately dismissed. So not only the "how" and "why" these monuments where constructed is unknown, but also "when". @MadPlasmatist, your theory is very interesting and although not all holes are for electrode purposes and also not all blocks have holes or protrusions, it doesn't mean that your theory is not valid! Carrying/moving/placing the stones is a different matter to "moulding" them. Different techniques, different technology. Not all megalithic structures seem to have applied the "moulding" techique. According to myths and legends, many of the megalithic monuments where constructed with "magical sounds" or deities playing magical instruments and producing sound that elevated/moved the stones into place, effortlessly (meaning, frequencies and resonance technology). Perhaps they where moulded with electrical currents after that...or before, who knows!? As for the power source used, it could be a number of things (e.g: Tesla's ether, electromagnetism, static electricity, lightning strikes, and things we cant even imagine). Not being able to imagine something, doesn't make it false or not-real!! Until recently, people firmly believed that the world is flat and if we sail too close to the edge we will fall off, into the abyss...that didn't make the world actually more flat or more round. And the world didn't start to be round (spherical) after the discovery of its true shape. A truth is the truth, no matter if we comprehend it or not, it always stays the same. The FACT is that these megalithic structures EXIST and that huge blocks were QUARRIED, TRANFERRED and POSITIONED in ways we do NOT understand and for reasons we do NOT understand...beyond that, everything is an assumption... As for powering, I would like to add that granite and limestone have distinct electrical properties. Especially huge blocks like the megalithic sites (their mass alone can distort electromagnetic fields). As far as i understand it, granite can store unusually high amounts of static electricity, while limestone has high conductivity especially when under pressure (piezo-electrical properties - similar concept to making your own orgone-producing artefact). I might be very wrong as the the particular properties attributed to granite and limestone, but for sure they have unique properties, or properties in higher amounts that other rocks (i think Archie was onto something). Also, many many ancient monuments in question are ridded with something that resembles small canals, made of stone, making everyone assume they were used for transferring water. BUT, what IF they had poured copper into these canals, not water, they would be creating giant insulated cables... Long story short, with arrays of giant blocks of granite and limestone in particular arrangements and the help of ancient "cables", the ancients could be creating structures with energy or electrical conductivity and/or storing/amplifying capabilities. Now, if these giant blocks are acting as cables, insulators and batteries, we can only begin to imagine what properties the whole structure could have! Especially if they were arranged into "sacred" shapes like a proper pyramid (pyr-amis = fire-inside). The megalithic world is intricately fascinating, not only for the sheer volume and size, not only for the technology applied to the construction, but for the level of applicable knowledge of those people/cultures. Definitely they would see us as extremely weird and primitive in our understanding of the earth, cosmos, natural laws and applications of our technology... Thank you for your video and experiments!! 😁

This is vary interesting. However you need to explain where the high voltage was obtained from.

Wow this is actually being considered plausible? Thanks drugs

I have solved it too! Everything is concrete! They had so much time and resources at the time that they made molds for everything from stone blocks and pillars to caves and cavities. Then they poured whole mountains around this with their super-advanced concrete that we have not been able to recreate to this day. They made cast structures that looked like they were chiseled and cut inside and out of granite and other stones. They did all this in their spare time while they sat and chuckled and thought of everyone who would be tricked in several thousand years.

Were did they get the PLAZMA from? Outer space.

Create the experiment - do it - and then have others re-create. Yeah baby!

Ropes were tied around the nubs and the stones were swung back and forth, one at a time as they were laid down, grinding the faces against one another. You can actually determine the order in which they were placed by looking at the seams. And as someone else mentioned, the holes were to brace some sort of facade made of a different material, like carved marble panels. You don't always find both at the same site, or even in the same cultures. You often find the nubs and the 'melted looking' stones in Peru, for instance. Marble facades would have been more common in Roman cultures. Not that seeing plasma flowing around different minerals isn't interesting.

You need to modulate the frequency of your voltage to match that of the stone you are trying to "meld". I suggest starting with a low amplitude voltage first until you find the resonant frequency of the stone then ramp it up until it starts to deform. A phase locked loop on the feedback current on the probes will allow you to dial it right in.

Solved? So why there's nobody around melting stones today?

Hey plasmatist, there's a ton of issues with your idea. That being said, I applaud your awareness of ancient stonework. I implore you to try anything to recreate it. If you do recreate it. How are you certain is it precisely how or what they did. 2 methods 1 result. Do you care about how they did it? Or just recreating it with modern technology they may have never had. Love to discuss ideas with you. Thing is, I take everything I know they must have known into account before I assume they know magic and aliens. So all of my methods may be way simpler methods. All untested. All highly likely. All my methods are plausible. I like how you declare there is no room for plausibility. Haha. I am the god of time, mastery over chronology. Ahhh they knew things. I decrypt their decayed brains and read their burned books. Interesting it is, 🌐 worldwide. Interesting it is all metal gone. Interesting holes, you know I know of many RU-vid channels who study these rocks and structures and artifacts. Ancients think we are retarded for not understanding what is obvious method to them. They knew magma / lava was rock. They knew rock could be melted. There are vitrified remains in places. They utilized more than 1 technique for these 'projects' The entire thing reeks of automation. Scaling. These polygonal are difficult to explain. Artifacts even moreso. Your technology can't recreate ALL of it. Possibly some though. Had they a crazy power source. Thing is too. You are implying these were constructed prior to a cataclysm otherwise you admit you have to be wrong. Chronology...101 I smoke it. They know water cuts rock. Doesn't explain everything though. Can you find a method using compiled ancient knowledge or must you resort to technology of the day to explain such masterpieces. Ahhh tube drills. They speak. Saw marks. Doesn't explain polygonal or nubs. Fucking nubs!!! Yes. Why not just smooth it out? They can cut it flat obviously everywhere else. They did it to fuck with you 10000 years in the future. They said haha nobody will ever figure out how we made this........they're right. We haven't. Too many stones. Too big. Too perfect. You can't cut perfect corners like in the serpium of Sakara. They are unbelievably smart.

"my incredible contributions" is an apt quote, but it is an intriguing puzzle for the ages, and this is a fair theory steeped in fundamental science that is worth a lot more work to constitute proof.

The problem I see with any "melting stone" ideas for any igneous rocks like granite, schist, etc is that when magma cools quickly it makes obsidian. In order to form crystals like those found in all igneous rocks other than obsidian, magma/lava/melted rock needs to cool far more slowly than would happen when exposed to earyhs surface temperatures.

Worthy of further investigation 🔎

What about a parabolic reflector to melt stone by the sun?

Developing this technology will be worth trillions of dollars. Be sure to take out a patent.

make a big stone SHOW IT

Welding... rocks. I felt it was just a matter of time for someone to finally figure out at least a portion of how they were built. Copper chisels and rocks indeed.

lol what a bunch of crap

You are on the right path, the way things are handled, ask and it is given

Ok... I'm the first to comment...so.. I am very interested to hear what this channel has to say about the nubs...i personally believe they are practical and not ancient alien tech. EDIT: half way thru your video....4:10... you jump so fast to nubs are the result of pulling out rods from the stone.... that's actually insane to say without any proof to back it up.... good try...but , as the saying goes...extraordinary claims...require extraordinary proof... you don't see that extraordinary proof at all...just another talking head...well...you tried..lol

This is way better than my assumption the nubs were for acoustical tuning.

Very interesting theories, I'd like to see it in action. Even on a small amount of stone.

I've been thinking this for years.

This confirms the theory that ‘straps’ commonly found between large stones was to complete an electrical circuit while melting the into place

Most importantly, how was the power created and evidence of it.

Did this guy just crack stone levitation using an electrode????

Yesss!!! I had visions of this technology a few years ago and went down a rabbit hole of learning about geopolymers (concrete) that was set with electricity. I didn’t find much on the electricity part of it, but I’m sure it’s how they did it. Did they use an Egyptian style ankh with a crystal in the middle to harness the “Tesla” energy and focus it to zap the blocks?

Would be cool to see the actual process of electric rock melting and management, though.

The pieces are comming out front. Nice. I kept thinking heat...the electrodes were shaped like tuning forks. More clues are in the area of the dendora lights. The wiring diagram is on the wall. Someone with the knowledge shared with the Dogons...shared it civilization at the time. What was no mention of sudden delush that destroyed the technology. The sun, planet and water (electricity) Great job! The carving of caves of ancient time look like forks going top to bottom on a block of butter. Well done!!

It's easier if everything is cast from geopolymers. no electricity required. The holes and protruding parts in the stones were there to attach scaffolding. Hyroglyphs were stamped into the exterior plaster. You don't have to reinvent the wheel, we also use polymers for every building construction.

I think you need to soften some small 1m3 rocks and demonstrate the 'softening'!

Can you make a video showing the actual method of melting the rock?

Interesting. Times millions of blocks? During thunderstorms only? There is the Baghdad battery but it's only 1.5 volts without much amperage.

Please don’t forge to mention that very large rocks in Peru display sights of heat damage resulting in significant flacking This has been verified as heat damaged granite. Thanks for your contribution. Looking forward to seeing more of your work. ❤

Okay let's build some stuff now!

Best explanation I've seen thus far. Better than poured rock what geologist extrapolated from samples of rock not as originally quarried. Makes sense. As for the source. 3 guesses, first 2 don't count.