So I have a question, how did you get a good print of the Suppressor barrel? every single time I've tried it has failed, could you show what orientation and settings you used?
I printed it at .25 layer height with the front of the suppressor touching the bed (threads at the top). I also used a brim for more surface contact with the bed, but a raft can also work if you're still having issues with that. The threads were tight for me so I scaled up the X and Y dimensions to 103% in Cura so the suppressor threads off the muzzle easier
hi bruh, im planning on building one for my arsenal... is there a way i could make one hitting like 200fps or above 190's atleast.. tnx for any tips and advice👍🏻
If you're aiming for almost 200fps, you're probably best using full length darts and a dual stage cage. For motors, 180s will help with spinup times, but I've seen some flywheel setups hit almost 200 with just a single stage. Your darts will probably become single use and it'll probably only work with fresh ones. Hope that helps
@@benpereznerf thnx for the reply... any suggested motors or cage/wheels set up for high perf. im verry newbie on fw blasters,.. and i see you also build up a nice stryfe..😉👍🏻👌🏻
Recommendations will depend on what part of the world you live in. If you live in or near Australia it would be easiest to get Neo Rhinos or Neo Hellcats for motors, but if you live closer to the US, Krakens or Valkyries will probably easier to get. For flywheels, I like daybreak wheels, but those are only compatible with daybreak cages
@@franco8190 Banned Blaster banshee cage will get you to 200fps (ot at least dang close) with half length darts on 3s battery. They are absolutely unreal. A half-dozen people in my local group use them.
