The hull cleaning process & the most modern machinery and technology help clean the hull effectively

Подписаться 345 тыс.

Просмотров 2,1 млн

50% 1

Ships after a long time operating at sea, their underwater bottom will be invaded by seaweed and other marine microorganisms. They attach to the hull, propellers and many underwater parts of the ship, reducing the ship's performance, most notably reducing the speed, increasing the cost of oil fuel to operate the ship. According to many statistics, the speed loss is 30% of the rated speed, so the fuel oil consumption increases accordingly. Regular underwater cleaning of the vessel makes it possible to restore the original speed by about 95-98% and reduce the cost of fuel oil, which, as a rule, accounts for almost half of the operating costs.
-----------------------------------
X-Machines Channel
Website: www.xmachines-...
Fanpage: www.facebook.c...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 203

@forward_ever_ever2595 2 года назад

Full respect for those doing that....thats a colossal amount of work

@NS-ex6cm 2 года назад

Colossal, not collasal.

@forward_ever_ever2595 2 года назад

@@NS-ex6cm thanks mate

@cameron3991 Год назад

Not when you have 2 or 3 crews in the water with 3 divers per crew and 1 safety per diver. They do a of of other maintenance while it’s docked like HVAC / Plumbing / Electrical. They usually dock cruise ships that are over 200ft. Once for 6 months every 4 to 5 years.

@wallerstc Год назад

@@forward_ever_ever2595dude, not mate

@PeterNebelung 5 месяцев назад

Good trick to remove and replace the bow thruster in the water. Nice rigging job.

@robertlevine2152 2 года назад

It is important to note that many ports no longer allow in water cleaning of hulls. There are concerns of the release of invasive species. There are also concerns that during the in-water cleaning of hulls biocides contained in antifouling paints will be deposited in local waters.

@iuliandragomir1 2 года назад

Is exactly what I wanted to say

@jasonantigua6825 2 года назад

Makes sense! Thanks for the information

@albertoghirlinzoni6631 Год назад

Buon Abbigliamento wè

@dongningprc Год назад

Talking about "the release of invasive species", I doubt by not allowing in water cleaning of hulls, invasive species will not move by themselves into the water near the ports. Are there any scientific evidence that in water cleaning is helping them migrating?

@robertlevine2152 Год назад

@@dongningprc I have, since retirement, been following this topic from the periphery. I have not been active in discussions with people from paint manufacturers, diver companies and State environmental agencies. In the assessment of actual harm it is often a "shoot first, ask questions later " mentality. It becomes easier to seek an alternative solution, than to spend the time and effort to disprove the hypothesis that harm is being done. Self-publishing copolyermer paints and other ablative paints provided a solution for the issue of in-water cleaning 15 years ago. I can't tell you what alternatives are being used today. Bob

@r.awilliams9815 2 года назад

What the video didn't mention is how astonishingly bad that job stinks. You get a ship into dry dock, it sits out of water in the sun and all those barnacles and other critters on the hull die and begin decomposing, and then you come along and start scraping the mess off...it's a stench you'll never forget.

@BackyardBeeKeepingNuevo 2 года назад

I now know what it will take to clean a ship’s hull if I ever end up owning a ship.

@barryrahn5957 Год назад

Very satisfying watching all that crud come flying off.

@BreadOnDeckk 4 месяца назад

The vertidrive is such a good boy 🥺

@charlesspringer4709 2 года назад

Nice work. Feed Wikepedia to a computer voice and put together other people's clips to sort of match. It works.

@X-Machines 2 года назад

Thanks so much

@hoof2001 2 года назад

2:40 is not a propellor: it’s one of the ship’s thruster units

@TheRoostersGarage Год назад

And I don't think it was removed for cleaning, that looked like a failed unit being replaced

@gerardboorsma3418 Год назад

Bow thruster

@Woody615 11 месяцев назад

@@TheRoostersGarage I was thinking to save time, they were removing the entire unit and replacing it with a different one. Then they take the old one and refurbish and renovate it and install it on the next ship.

@TheRoostersGarage 11 месяцев назад

@@Woody615 That would be a good option! It's not like any of this stuff is cheap, so I'm sure a lot of the components get rebuilt many times.

@a-fl-man640 2 года назад

nice video, music wasn't overbearing and didn't interfere with the narration, good job. subscribed

@mojoden Год назад

Are you deaf?????

@vientran3861 2 года назад

Thanks for your video and people to maintain the ships

@X-Machines 2 года назад

Cảm ơn bạn đã để lại bình luận

@StringTone-t6v 5 месяцев назад

Lha yp loe keta kete iso ponter ning ameroca iyo memang koe pinter.thankyoi very much

@MrCarlosMRLima 2 года назад

Quem apresenta este tipo de vídeos, como se tratasse de algo extraordinário, até me dá vontade de rir, porque quando há bastante mais de quarenta anos entrei para os Estaleiros Navais da Setenave em Setúbal - Portugal, já todo este tipo de tecnologia para reparação e manutenção de navios era usada, incluindo a utilização de "dock arms" para permitir um fácil e rápido acesso a qualquer parte do casco do navio!!!

@billwalker790 2 года назад

Interesting, have they gone to Teflon coating or can it be done?

@AlexanderVadura 4 месяца назад

In wechen Abständen muss das gemacht werden?

@healthytalk666 Год назад

Ship cleaning! Looks satisfying .....

@radoanazad4535 Год назад

Alhamdulillah Thanks for you your all video very nice I like you I love you

@deejaytrizay 2 года назад

I hear this same voice in a LOT of videos. It, ofcourse, sounds synthetic, but...where do ppl get this voice from?

@X-Machines 2 года назад

Thanks for your valuable comment. X-Machines is trying every day to create interesting and useful videos for viewers. Recently X-Machines got new narrators. Could you take a moment to watch these videos and give us your opinion on these narrators ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Jw5aKzUDBQM.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hCDwfVFH26o.html

@prateekgemawat8017 Год назад

Very nice, concise and informative video. Great work 👍

@DanBurgaud 7 месяцев назад

4:16 I LIKE THIS! NICE!

@gvanys 2 года назад

I would like to know the cost for this service and how long it takes.

@AndyHayes1 19 дней назад

Wow that first ship look long due for a cleaning. Definitely see how that would burn more fuel

@BeeRich33 2 года назад

That's not a propellor. It's a bow thruster.

@davidbwa 2 года назад

The device being used to create that thrust is literally a propeller. It wasn't an airplane either but many of those have propellers as well. From the internet - "What does bow thruster do? In simplest terms, thrusters are designed with propellers facing in a sideways direction so when they are turned on, they push the bow or stern of a boat sideways through the water, in either direction"

@BeeRich33 2 года назад

@@davidbwa Not around boats much I see. Take your grade school lecture elsewhere, kid.

@paulreilly3904 2 года назад

Looks like a duck, walks like a duck.... 😁

@buddtwin2 2 года назад

I mean he also said seaweed is going to attack the hull lol so I’m not surprised by the inaccurate description

@06blackflhxi 2 года назад

but the bow thruster has a propeller

@capnchip 2 года назад

Pretty interesting. Too bad thee camera is switched around so much it is almost impossible to actually see what is taking place.

@fredgervinm.p.3315 2 года назад

I have cleaned my share of hulls and painted them with TBTF paint...

@alexgomes8351 10 месяцев назад

Great video brother. I just loved it!

@markpinther9296 2 года назад

Music sounds like a symphony of dead animals.

@aquious953 11 месяцев назад

The best method is Lazer blasting. It is amazing.

@arkel312 2 года назад

1991 rok stocznia Polska Szczecin Gryfia. Pozdrawiam wszystkich z doku nr 5. To były czasy...

@dejupp 2 года назад

tell me, why tf you have music in your vid? WHY???

@X-Machines 2 года назад

Is it ok if I have nothing without music or audio?

@dejupp 2 года назад

@@X-Machines original audio. only original sounds. nobody is interested in your taste in music.

@elconquistador98 2 года назад

@@X-Machines yes

@alexanderSydneyOz 2 года назад

@@X-Machines yes, much better if you do not. Surely you look at RU-vid videos also? If you do you will notice that videos with music in them are the subject of endless complaints. It is even worse when a video like this has a truly bizarre collection of incompatible different music.

@treetop5752 Год назад

@@X-Machinesmusic ruined this video

@MatthewClark-t8h Год назад

good video . I liked it

@edgarcruzsr9695 2 года назад

love this stuff!

@X-Machines 2 года назад

Great

@Broody-cq2yl 8 месяцев назад

Bunch of barnacles must be waiting right out side the maintenance yard for fresh surface😂

@corinnehorvath2519 2 месяца назад

Pourquoi ils ne mettent pas de la graisse à fort pouvoir graissant pour éviter que les balanes s'accrochent sur la coque ?

@cohall46 2 года назад

Very interesting.

@X-Machines 2 года назад

Glad to hear that.

@TheJimbob1603 11 месяцев назад

Great content ....... but, Robo-voice narrators are a plague on RU-vid!

@johnvalencia7488 3 месяца назад

I always keep my propeller shined. The End.

@sunitadwarka347 Год назад

Each problem has different solutions. Another system is engineer must make heating systems of propelar, must discontinue wiring from inside use rubber where ever needed and heat it . All dust will seprate. Second system is must use hot water drops by drop water system connection to pass on propeller. Must experiment which method is best. While making machenical limbs for ships, we must make arrangements for cleaning. Like we can make mechanical limbs with hot water pipe material and we pass hot water time to time inside hot water pipe, so that nothing will get stuck to it. Jay shree ram. Shipping industry will completely change in future. Not the original structure but problems will be solved. Not returning from sea bring tears in eyes of family members. Jay shree ram.

@oumardiallo9564 7 месяцев назад

Formidable

@soldtobediers 2 года назад

You can drive out nature with a pitch fork But it always comes roaring back again

@richsmith3300 2 года назад

In other words a constant supply of work and money😁

@paulcheney3636 Год назад

I've lost count of the amount of hours I have spent blasting off old paint barnacles etc. The blasting gun was powered by a volvo truck engine and the power is incredible. The noise is deafening and even with eye protection I've had to go to hospital maybe 8 times to have a foreign body taken out. The paint below the waterline is very poisonous and as it's washed off there's a paint coloured mist in the air. I've had shadows on my lungs twice and as soon as doctors see you've worked with marine paint they pay attention. Your health is precious and no amount of money is worth it

@aglsports2 2 года назад

What's with the annoying music.

@simonmcneilly55 2 года назад

Maximum cringe can’t be achieved without it

@Pietabotha777 2 года назад

Yes, it is really irritating... The video is interesting, but please lose that "music"!!!

@oumardiallo9564 7 месяцев назад

Maximum

@sunitadwarka347 Год назад

My another suggestion is, Make holes in the propeller fan arms. Take longer screw with rubber vayser . Cut the rubber sheets as per as size of propeller fan arms for both the sides ... or make cover with rubber sheets to wing of propeller. With screws you fix rubber sheets use rubber vayser to tighten it, After every fifteen days, you change the rubber sheets by opening screws. It will be very easy work. You keep it for drying all dust will seprate automatically. Till hot water system is not coming use this system. Screws will propeller fan arms rubber. Jay shree ram.

@glennsoucy4359 7 месяцев назад

Idiotic

@sqishybananananana4271 Год назад

The video: *cleaning a ships Hull* My daughter who knows what she likes: Tugboats!

@tbusman1 2 года назад

What shipyard was this filmed at?

@RedArrow73 2 года назад

They should try Cleaning Lasers.

@iqbang9236 Год назад

I was wondering how much each cleaning + repaint job would cost for the big ships? Probably millions?

@thesausage351 Год назад

The cost of the dock plus the workers would be phenomenal.

@tanjogok 2 года назад

Memang bagus sekali

@floydwilliams3321 2 года назад

Interesting

@jeremiahmendez3318 11 месяцев назад

I hope these guys are paid well

@marcobobson5972 Год назад

How much does this job cost? Clean and new paint.

@gajananphadte3440 2 года назад

It is called Bow Thruster.... not propeller at 2.40

@gguthary1 2 года назад

Can't stand robot voiceovers.

@X-Machines 2 года назад

Could you please watch our newest video with new audio and give us more comment. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Jw5aKzUDBQM.html

@TheRoostersGarage Год назад

1:50 "minimal impact on the hull" - That thing was stripping the bottom paint off with the barnacles and took it down to bare steel!!

@tinderbox218 2 года назад

0:59 Trypophobia triggered

@darktoadone5068 2 года назад

Looks like a very labor intensive job and a hot and sweaty one also, just imagine when they are doing this in the summer. If you're out of shape, not a job for you.

@mannyfernandez6860 2 года назад

thats the easy part actually..The tough drydocking jobs are inside those hulls.

@Lifeindrydock 2 года назад

Trust me it is Imagine it's wat I do in the gulf currently

@Kymcook73 2 года назад

Looks for jobs in hull cleaning immediately after memorized by this.

@richsmith3300 2 года назад

Haha me too

@patriot-wf1er 2 года назад

Horrible background music I shut u off half way

@sunitadwarka347 Год назад

I want you to do one experiment with propeller, You take coconut rope and conver the propeller fan body with ropes, you cut the rope and put another rope each month, after sometime we will find some new method to cover propeller body. First experiment with this. Jay shree ram.

@michaelburns8279 2 года назад

Very interesting, except the mechanical voice and awful music really distracted from the video

@ruffnersedurifa7226 2 года назад

@1:48 what is that equipment?

@Rick-tb4so 9 месяцев назад

What's the cost for a super tanker?

@bigjohn2810 2 месяца назад

Bird dropping Welding @3;09

@petercrossley1069 2 года назад

“Reduce the damage that damages the propellers”. Who writes this gobbledegook?

@robertfish6617 2 года назад

I was enjoying the video, but I had to turn it off because of that fucking horrifying music.

@X-Machines 2 года назад

I'm sorry about that, I will try to choose better music in other videos.

@deepdiver51 2 года назад

Just don’t put any music at all.

@jasonantigua6825 2 года назад

@@X-Machines Don’t apologise! People should be thankful that you put in the time and effort to bring us these videos.

@wdwerker 2 года назад

I enjoy this type of video but the computer voice is awful !

@X-Machines 2 года назад

@Mark-ml2tv 8 месяцев назад

Watching the various fouling removal methods, it is quite obvious that the environmental impact of the uncaptured and uncontained fouling was not taken into consideration.

@felixthecleaner8843 Год назад

09:30 are those 'Sacrificial Anodes'?

@booksteer7057 2 года назад

We can create and launch the James Webb telescope, but they haven't found a way to keep barnacles from growing on a ship?!?

@luigicristiani7709 Год назад

v Forgive me but the speed of editing the images gives me a headache!!! Too short time between shots!!!

@mithunsivan1989 2 года назад

I'm not going to buy a ship !!

@mkarthik3065 Год назад

This not propeller from aft. This is bow thruster blade from fwd

@rp1645 2 года назад

I remember those old B&W films of the PT-Boats, in wooden stays. The crew let the tide go out. Then worked hard on cleaning hull. And repair of bullet holes. I see so mean NEW boats at boat shows. With no paint on our drive. Or the bottom painted. New owner has to add that into cost. If boat is left in SALT water. There is NEW bottom paints coming out for large ship.

@X-Machines 2 года назад

This video is different.

@seevalidedigama6525 2 года назад

@@X-Machines 7ㅈ77

@davidmarshall4971 2 года назад

@TheSafetySmith 2 года назад

Honestly, I thought there were bigger robotic systems for a dry or semi dry dock cleaning

@TheDieselStop 2 года назад

Salt water is unforgiving

@yehiaselim3774 2 года назад

ما هو السعر

@bally1213 3 месяца назад

Good video, crap music 😳

@hassamtv4152 3 месяца назад

❤

@sunitadwarka347 Год назад

Another method is make rubber body cover for propeller, using velcro or jip chain. Jay shree ram.

@russianfish_VVO 8 месяцев назад

Кутое видео ❤

@soldtobediers 2 года назад

A constant electrical charge should off set any contact growth. No?

@denali9449 Год назад

And then you must contend with the corrosion problem you created by inducing an electrical charge to the hull. All those shiny silver things on the hull are sacrificial zincs to absorb the stray electrical charges due to dissimilar metals in the salt water. Adding more electricity to the mix will create more corrosion in the hull and fittings.

@mmoradiointeractive Год назад

What is the music at 4:43 if anyone knows?

@makewithmegma 2 года назад

🔥💕👍

@AMG63 Год назад

3.10 that welding is atrocious 😩

@collenrevillosa1376 Год назад

Applay blasting painting mei

@carloschicue2608 2 года назад

Cuanto vale un barco así de gigante por hay 2 millones de dólares

@maeln5425 2 года назад

SIMA servicios industriales de la marina.

@mr.majestic8713 2 года назад

The music is annoying there's no need for it. Thumbs down!

@shashankm8554 7 месяцев назад

Stop music as warranted fr this news

@johanea 7 месяцев назад

So much playing around. A bunch of Bangladeshi workers would have the hull cleaned and stripped off the paint in two days. Add another two days for primer and top coat of paint. Done. Doing thrusters while afloat is rubbish too as it cost a bomb, takes much longer and makes it difficult for all involved to work.