The INCREDIBLY SIMPLE Way To Extend Your Washing Machine Drain Hose! 

You're welcome!

That's why I use a 1/4" socket, never a screwdriver if I can help it...

@@arealassassin i agree, maybe a wider flat driver that fits would help too lol

Very close, you can see the white line on his knuckle.

Glad it helped!

Hi Is that help do you try it ?

The part that goes inside is a "hose barb coupling/splicer". The metal clamps on the outside are standard "hose clamps".

Most welcome

Add a longer hose at the pump connection, avoid splicing. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LUJfVK6cvAQ.html

This is solid advice from ​@jeffwieser6514 Ignore this video, do it properly, or pay a tradesman to do it properly.

It will flow out next time you use it

@@johnmcvideo Yes but the problem it's stinky, it's connected to the sink drain.

You want to put a u bend on somewhere as the water in the u bend should help to stop the smell

@@TheBlokeCave Thanks a lot

@@TheBlokeCave how many time bend when you have total 12 ft pipe that is 6ft connected with another 6ft to kitchen sink

The pipes are usually a standard size, the connector can be hard to squeeze in sometimes, if it looks like it might fit then maybe try lubricating it with something.

Ring spanner, box spanner. WD40 or heat it first.

yes it is definitely possible. You will just need to make sure you can get the water supply and drainage over to it. You will want to use some PVC pipe, mounted to the wall, with a consistent drop for the drain. If you use a hose just left on the floor over that distance you will probably get problems with stagnant water and therefore nasty smells.

It was quite a tight fit but twisting and pushing at the same time seemed to get the job done for me.

This just doss not work at all for dishwasher outlets, particularly the Bosch countertop dishwasher I was trying to connect up. I've heard putting the end in boiling water can help But for me, the hose just does NOT go on the 17mm connector as shown in the video, boiling water, twisting, or none of that: it just won't. You have to buy a new hose.

Unavailable

I have just started selling these on my own store and changed the link above!

A brand new hose is always the best solution. Having two potential leak points is always better than having 4. But I work in maintenance and honestly connection points like these are never the issue. The hose itself is just as likely to develop a hole randomly as it is likely that it would leak out of these connections. (Literally the issue I'm dealing with now) and to replace the entire hose means completely uninstalling and reinstalling the entire dishwasher basically I work in a big apartment complex, and the last 6 or 7 years, have had zero leak from connections like to these, they've all been from the supply side water lines or from the pump itself. You should be worried about the supply side water line as that can run continuously until the end of time lol while the drain line he's repairing can only pump out whats in the machine. Being worried about someone using this above you is like worrying a plumber used plumbers tape (I've had tenants worry about this lol) it's a tool to do their job safely. In regards to how he's using the tool, yes this is unsafe, I've stabbed myself a good 3-4 times before switching to a socket to tighten them (the flat heads are brutal/dangerous and require a lot of force to tighten properly)

I just got a new washing machine delivered today and there is no way to replace the short drain hose so I will have to do the same thing.

You worry too much