The Legend Beast Mode Demonstration 

Thank you for improving my new Legend! You guys rock, I'm extremely happy with my Legend Pro kit! I'm going out TODAY. God bless

Thank you Nokta for this demonstration. It certainly makes sense.

Thanks for the video it helps to make sense of the updates functions and intended use. GB2 is particularly useful for coke and hot rocks. I’ve used beast mode for about 4 hours on my Roman site where there is a lot of small iron which makes the detector very busy which can get annoying, my main issue is EMI, I can’t get rid of it I have noise cancelled ground balanced and turned sensitivity down as low as 14 and it’s still there, I’ve done a second factory reset nothing seems to get rid of the EMI.

Nice video, thanks, think what I'll do is clean out the area first until I dont hear any other targets, then I'll switch to beast mode to double check and see if I missed anything! ❤❤

Being that the targets are really deep....even a squeak is great for the dig everything type like me

Thanks for the explanation! What is the depth of each of the targets?

Awesome ✌🏼❤️😊🍀

Updated to 1.15 dialled in these settings and saved as profile 4. I have 3 other profiles setup Depp pasture, cultivated and stubble anti falsing setting when hitting stubble stalks with the coil. Now I have a dirt box setup with a depth of 12 inches at the deepest and 2 inches at the shallowest. I have tested this with a small roman Silver Siliqua and all my different profile settings hit the target at a depth of 8 inches, so moved it to 10 inches and beast mode won't see it, but my deep pasture setting just about hits it. so there is no difference in my book and I have air tested with the same results. so I have followed this video to the rule and been careful to factory reset the legend before the 1.15 update... not tried the DT mode yet.

This demo is anything but scientific

When the final version comes out, it would be a good idea to call it something other than Beast Mode because RU-vid is flooded with previous Beast Mode videos that will confuse a lot of people.

🔥

Why is it on g in park and field mode and all-metal in beast mode? In G, 1 to 4 are hidden. I can't even find the coins in field mode

why didn't you test the park and field mode in recovery at 3 as the beast has at default? In your test park and field have 5 recovery speed.

Same on bugs the heck out yuh, CHATTER!!

My test in very low mineralized ground: Park Mode in A, first tone break at 1, 25 sensitivity, 3 recovery, IF 0, BC 0, AG 3. I used a U.S. nickel, ground balanced at 26 on clean ground, and buried the nickel deep enough that in Park mode, I would very occasionally get a tone and an ID of 2 and 3. I switched on DT and set it to 3. I now got fairly consistent two way hits, but they were kind of "crunchy". The ID jumped from 2/3, and I saw a 48 / 50 a few times. Switched to BM using A and set the IR at 2, AG at 3. Ground balanced at 31 on clean ground. The two way hits were much cleaner than DT, and the ID's were similar to DT. On a side note, I tripled checked the ground balance in Park and BM, to confirm that the ground balance was slightly different between those modes. It's also only necessary to use the 2nd GB for scenarios such as hot rocks. Doing the 2nd GB if it isn't necessary, would likely result in a GB that is too positive for the ground.

Could you show how the dt function works?

Super

I'm very 'old-skool'; beaucoup years on sparky analogues.For what it is worth: Always precisely manual GB (ground permitting), and manual GB through-out the day. Don't be lazy. Learn it. Yo.

Porque no hizo prueba tambien en modo M3 en parque, campo y oro vs modo bestia.... Aun tengo mis dudas sin embargo sigo aprendiendo, tambien utilizo dos velocidades de recuperación primero 5 y luego 3, utilizando la sensibilidad a tope, y umbral de 3 al parecer, por lo que se menor velocidad de recuperación aumenta la capacidad de profundidad por lo que me genera aun mas dudas este ejercicio en particular, ya que mezclo diferentes funciones en los mismos objetivos..por lo tanto considero aue no fue una demostración clara...🙋🏽‍♂️

My results are the exact opposite in MY soil.....however I see they're in a red clay based soil. I may have to see if I can find anything like that around here.

Why not tell the folks the depth of the coins??? Is it a big secret lol

فلزیاب آپادانا ❤❤❤❤❤

i don't trust audio voice overs. plus detector audio sound overs. when you ground balance with the legend you don't get that audible sound? rather non? at 1.58 in the video. why do we see the hot rot in the small right video clip and not in the larger video clip if they are meant to be the same recording time. also why do they not tell us the depths at which the objects are meant to be buried at. please do a video again but using "real time audio".

Okay. Why not check the targets using park and field with AM. Like you did with beast? Both at 3 and 5 recovery speed. You see you changed to AM with beast. You used G ground with park and field. Makes no sense.

Just buy a Manticore and be in Beast mode all the time

That demo only shows the difference of discrimination pattern A n G .. of course on setting G the modes won't pick up Vdi 2. What a pointless demo ... Basically if you set park mode for depth and in A all metal mode you'd get exact same results as beast mode. I've used beast mode for two days and basically you've no idea what target you are over ... Need to keep switching to park or field to try to get a Vdi... Pointless

A velocidade de recuperação no besta foi baixado para 3, enquanto no m1 e m2 era 5, fazendo diferença na profundidade. Não foi uma comparação justa.

Сделали прошивку отвратительно, от всего Русскоязычного сообщества сообщаю, что это очень плохо сделано!!! Верните 09.04.

Can the ground tracking be used in beast mode

En el modo parque y campo estava activa la discriminacion G por lo tanto no detectó las monedas que aparecen con numero 1Y2 , cuando pasaron a campo de oro no había activa ninguna discriminacion por lo tanto si detectaron las monedas