The Locomotive I failed to fix - Will it Run? 1963 Davy Crockett 

Man, this is like the last video, old proposed project from an old video finally getting restored, been looking forward to this one as well, this locomotive always intrigued me, I wonder what happened to the frame and how it got snapped in half, it was interesting to think about how bad that model had to have been treated while I was watching the video you got the locomotive in.

🎶 Davy, Davy Crockett, king of the wild frontier. 🎶 One of these days, Harrison, someone is going to write a song about you, king of classic train restorations. Great job! Thanks for sharing. 👍🐾👍

Hey Mate what a great job of getting the Old Davy Crockett up and running👍. Mum and Dad got me one whe i was 6 or7 it had the working smoke stack it was the greatest thing ever at the time. Thanks for a quick trip down memory lane. Good onya mate👍👍.

Remember when you started this project, glad to see you continue

Awesomeness. So glad to see it running. I was back in hospital and not the facility again. They are trying to save my big toe and get rid of pneumonia. Cross your fingers

Looks like this is gonna be another great restoration!

Hi, These ols Triang Hornby Locos were fitted with an X03 or X04 motor that were always very noisy. I am very surprised to hear how quiet this motor was and a smooth runner when on Hornby track. Another successful repair and another old timer rescued. Great job. Cheers, Paul.

I think of the old song Davy Crockett when I watch this. This makes me want to dig out my grandfathers old die cast locomotive and fix it up. It does run. same mechanism as this.

Good job! Its amazing how you can make anything run like a Swiss watch!

Very nice work. It is good to she the old girl rolling on the tracks!!

Great work! I love seeing the old steam engines.

Good job Harrison. I never doubted you would get it running.

1:45 I had that same experience (I was given a free livestock boxcar when I ordered a Tyco/Mantua ATSF F7A for repairs (main issue with the loco was the metal wheels on the front truck were on the same side as the rear trucks)

It’s really great to see others besides me working on old stuff left for the scrap pile….. cool!!

Enjoyed your video.....the good feeling you get from a successful restoration never gets old!

We have a few of the old Triang American cars at the shop I work in. We also had some US N scale come into the shop and I made the decision to get an Atlas Burlington GP-30 and some freight cars! Good to see another successful repair!

You are amazing. Somehow you bring these old locos back to life. Long live the Davy Crockett. Battle of the Alamo. Yes, my hometown San Antonio, Texas.

Congrats on getting it going. I love triang trains, never actually saw that Crockett loco.

Thanks Harrison for the video. Nice "Runner"!

SMT is a living legend at his work because this is amazingly impressive and good job to you SMT mainline! - AWVR 777

This made me so happy. I've been hoping you'd work on this engine again

Wow I thought I would never see that train again and it is cool

great to see it running the rails again

I've been waiting for a follow up video to the original for ages. thanks Sir!

HARRISON ! YOU CAN GET EM BOTH TO RUN , IT 's TIME TO KITBASH ! YOU CAN DO IT ! 😎

Triang trains are great, but yes, you need the appropriate track to run them on. Great job!

WOW!!! Great job Harrison!!!

Very solid troubleshooting. Looks like you got a good running Christmas tree train

Who would have thought this would be as hard or harder to get running than the Yellowstone! Great video!! I literally LOL'd the 3rd time it didn't run!

A great job restoring a beautiful classic steam locomotive.

Hi there ,, ive worked on heaps of these triang x03 and x04 motors. The bits that flew of is a part of the shellac or the paint varnishy type of covering that goes on the outsode of the motors to stop it from rusting and should be ok with out it. The thing on the front will more than likely work as these old thing were made before planned obscellessance and were made to go for a long time. You will find that the main things to clean properly are the wheels the brass wipers that contact the wheels on the botton plate and a good oiling goes really well. I got one of these running with in 5 minutes so i pulled it down for a major servrvice replaced the axle bushes as well as these were decayed due to age. The other thing like other locos is the quartering when replacing the insulator bushes on the axles. Once you do that they run like a clock and are widely used in nearly all the 0-6-0 shunters steamers Pacific locos and diesel 08 class loco's. It is a shame you cut the yellow wire as that is the smoking unit that my 1 has too. When i got mine going the first time it ran a little puff of smoke came out of the brass stack that is at the front. These also take only a drop of smoking fluid and is still made today for these smoking units. You can easily join and solder the yellow wire and the smoke unit will more than likely work. Im missing the cow catcher the front headlight and a few of the domes and bells too. Good to see you got it running. Cheers from John in Australia.

Old train back up n running again nice job

great to see this running. love these locomotives. great job.

I remember when you first tried to fix it glad you got it running great work as always :)

Really nice restoration on this here!

Those smoke units are pretty delicate, there was a resistor next to the motor because the smoke runs on 6 or 9 volts or something. I learned that the hard way once, where I wired the smoker directly to 12 volts, the engine ran very slowly, and there was a red glow out of the smoke stack, then pop and it was done! Melted the smoke stack, got so hot! But that is a very cool engine!

Nostalgia fest, I got one for Christmas from my parents back in the early 60s, it came with a couple of passenger carriages, dad built a layout so my brothers and me could easily run our trains.

Last weekend I had fun at the train show in Eugene, Oregon, Lane County Fair Grounds

I Lo❤e The Davy Crockett Locomotive! It's The King 👑 Of The Wild Frontier 🏹

SMT - It might be a good idea to put some oil on the crosshead guides that are coming out of the back of the cylinders, to reduce the friction between the guides and the crosshead. For smoke fluid, you could see if you get mineral oil from your pharmacy & try it out!

Another video. Good to see you alive as always! I’m gonna get a dcc diesel locomotive. What locomotive should I get? (Presumably thinking of like an sd70 or something like that) I’m taking any suggestions!

Once again, nice job 😊👍

I have a good feeling you will make that ho engine run I love watching you fixed engines It's very relaxing for me Learn how to fix them

Great you got it working again! Nice one, best wishes from the UK

Just read through the other comments. You're my kind of model railroader, and I LIKE you! I'd rather have the robust, basic reliability of these veteran models, which keep on running, than the inbuilt delicacy and fragility of the modern stock, no matter how finely detailed they are. I envy you the Varney Yellowstone - a very rare bird indeed here in Britain, which I only know from a photograph in a very old (slightly prewar, by about 1 day!) book. I daren't look at Ebay HO nowadays - there's been some dangerously tempting stuff on there. Threes and eights on you, good buddy.

If I had to go through what you did with the Davy Crockett , it would have been smashed against the nearest wall ! Kudos to you for your patience !!

My dad took me to it. It was fun getting guess what I found A couple of dummy, locomotives, southern, pacific collectible train

Nice work fun to watch thank you

BEAUTIFUL Harrison

I like the look of that locomotive in terms of the old look and that smoke stack cool

Great job as a collector you have proven that if you are patient you can get what you need for the right price. Turned out great and on a side note love the cat I am a huge lover of British Blues, Russian Blues and also had a Corat until recently love those grey guys (or girls)

It was called the model club train show presented by Williams, Cascade

Awesome dude 👍

I’m not all that into oo gauge stuff, but this was, yet again, another great restoration. Very cool video.

Hey man, awesome fix

I'm not familiar with Tri-Ang trains, but that was a good restoration! It is tricky working on steam engines.

Saved another one Harrison. Well done.

Well done, Paul!. I've also got one of these engines - a long time favourite of mine, and as you say hard to find in good condition. Things to watch for - the cylinder block can get fragile with 'plastic fatigue'; many I've seen have broken off, losing the cylinders. Same applies to the pilot, cab roof and headlight. I noticed you helping her through modern points, as if 'sticking' in the flangeways - Triang's wheel back to back was coarse by modern standards, and tends to bind. The simple cure is to gently lever the insulated drivers out on the axle a little and widen the gauge - there's enough 'slop' to let you do it. The model is actually quite a decent representation of the real thing, far more so than many English fans perhaps realised. I suspect it's made from plans of a T,NO&C mogul in the Kalmbach 'Cyclopedia' which matches pretty closely. The coach which ran with it has very strong Pennsylvania overtones, particularly the deep valances over the end platforms, and again Model Railroader drawings of the early 60's suggest the source. In Australia I believe the engine was marketed as the 'Ned Kelly'!

Triang locomotivas, from experience are pretty durable cause I have a 1973 coronation scot which at the time didnt work because the motor would turn but the wheels wouldnt but all I had to do was give it some gears from another older triang that I used to have and a good cleaning and it worked perfectly

Fantastic video thank you

i love them old wood burners!

As always, entertaining video. I got a little laugh when you stated it was remarkable that Triang/Hornby hadn't changed the design of the motor in almost 20 years. Hornby to this day are still cranking out models based on that chassis platform. When I see that 0-6-0 wheel spacing it screams old triang chassis. I think they've gotten their money worth of the design, at least 50 years of throwing a different body shell on the same chassis.

Ya let the magic smoke out, never a good sign that happening.

My Money Is On you. I would Love To see You Get both of those Engines Running.

best vid I've seen today.

Hi SMT I got good news that package I sent you has arrived at your P.O. Box and ready for you to review😁

'I don't want to open this thing up again' **proceeds to open it up again**

Clearly this is not the case, because they are different engines to the one I bring to reply. But if I were to acquire a 19th century locomotive, I would name it "General" in honor of the locomotive in the Buster Keaton movie. Taking care, of course, that it does not end up falling into a river xD Speaking of vintage stuff... the Gomez Adams diorama. Did you know that all the accident scenes were the same scene repeated every time? It was disappointing to learn that as a kid I imagined something else, when it never existed. Although, the diorama in the 1991 movie, was a nice one!

It's Based off B&O number 600 J.C. Davis!

I like older triang rivarossi or Bachmann old 4-4-0s such cool engine and good restration

Great restoration ! It has the standard 0-6-0 chassis used on many Triang Hornby locos over the years. You’d be able to swap it for the chassis on your GWR Pannier tank for example. It should be able to run on code 100 track OK. All my old Triang Hornby locos are ok on Peco though they will only go through universal points. The fine scale ones defeat them. 1950’s Triang locos are a no go though as the flanges are even bigger, but anything from the early 60’s is OK. Maybe the frog sections on your points are too fine? Try adjusting the back to back of the wheel sets.

I’m really enjoying the Nerf Cat pillow i bought a while ago!

Fun fact my uncle has a steam locomotive and it has that smoke element and it’s a cool thing to have it’s a great thing to have

another gr8 video

The flanges are huge as they were made for the old Triang track which was also very chunky

The motor appears to be similar to the one that Mantua/Tyco used in their steam locomotive kit/rtr’s. The fluted steam dome from Tyco’s “old timer” 4-6-0 would be a good fit on this locomotive. It would go on with no modification as the dome has a “splined” stud on it. Great work on getting an obvious economy loco.

great job, I feel I should mention that the old hornby/tri ang locos are 12v max, they are not designed to run at 18v. those old xo3,xo4 motors are quite resiliant and could sometimes need re magnetising.

You rock bro! 👍😎🚂

It was about $50 for it but it was not too bad for a price

Land of misfit toys chapter of the SMT manual. Mark&Lily save the day with some track🚂🇨🇦🙋

And the Disneyland express is off to a great start

First of all: I'm astonished that YOU had a failure!! It's the first I've seen (other than the cursed Acela). Second - I am NOT AT ALL SURPRISED that you got the baby running again!!! My complements to the Master!!!

I love your ho scale model restoration videos cause i love trains

Great job as always. I’m surprised you’re not into 3D printing. You could print your own parts. I think. Wait a second.. you mentioned a basement overhaul. Are you making space for a 3D printing station?? Lol. “Mom, Dad, as you know, I have a RU-vid channel. And a very large locomotive collection. I think it’s time we move all of your stuff into storage.” Lol

The heat element is an interesting thing, it was Triang’s own “Seuthe” unit, which simply outputs a constant flow of smoke My personal favourite of their smoke generators is their “Synchrosmoke” unit, which uses a pump to force air into the smoke generator, resulting in the oil vapour being pushed out in synchrony with the wheels! 1950s/60s models were something different

Very nice

Nice restoration. It fought you alittle but you got the best of it. 😀 Nice little steam engine.

Pre tin the brush bracket. Put the brush face down use a pen torch to reattach the pieces….

Wow Finally the Triang Davy Crockett gets its repairs. I like how you put the dome where i did look it up that's how it supposed to look but it has a Pointed area for the whistle. Hopefully i don't make any typos due to me typing this on my 2011-2012 desktop which i put a Linux operating system on it since windows was being a pain. any way Good job on the revival

The best place for that model is in the 'museum' on the layout.

Awesome, i have the same loco with the smoke unit working, ITS a beautifuñl mchine

Gonna comment before I watch SMT I know you can do it even if u can’t fix it try again I’m working with a life like loco I forgot the name but you made a video on it being bad I’m trying to fix mine now and I thought I could not do it but today I tried again and it works so keep trying!

Johnsons baby oil works wonders as smoke oil. And it smells nice too!

the smoke box is the best part! please make it work

Don't let the magic smoke out!😂

How to get harrison in a bad mood: this engine

Great work. Welcome appearance from Nerf Cat!

I think you got lucky with your figuring out why it was shorting, you can see around the 8 minute mark the insulation on that wire that "fixed the problem" is perfectly fine, but the yellow wire to the smoker has the insulation ripped open as you can see bare copper so probably was shorting against that plate, good call in just clipping that wire out though.

nice! btw the wheel bearing/axels seems dry..good runner!!

Just to let you know, sometimes there is a motor is in the tender.