The new DumboRC DDF-350! Unboxing and detailed explanation

Подписаться 27 тыс.

Просмотров 12 тыс.

50% 1

This is the new DumboRC DDF-350... And wow, this thing is amazing for the money!
DumboRC DDF-350:
▶️ s.click.aliexpress.com/e/_EwC...
🎬 Ultimate servo test: • Is expensive better? O...
RC is more than my hobby, its a lifestyle!
Therefor I'll post a lot of RC stuff video's on my channel and I'll do my best to give you hours of entertainment and knowledge.
Only with your support I can keep posting new stuff, thank you!
(affiliated links may be used to support the channel)

Хобби

Опубликовано:

19 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@hofsplace 5 месяцев назад

The remote: ▶️ s.click.aliexpress.com/e/_EwC8MTL

@adityamody8942 7 месяцев назад

Love demo for the radio, make it very tempting to buy

@dejanzdravkovic9010 4 месяца назад

Great tutorial, Thank you!

@carlosjuarez7449 6 месяцев назад

They are great! I believe I have around 5 of them.

@Top-Jimmy 7 дней назад

Please correct me if I'm wrong, which is often. You seem to have not included how to bind a receiver with the DDF-350 ?

@hofsplace 7 дней назад

Turn on the receiver, press the bind button it flashes, then turn on the transmitter, It should automatically bind, steer a couple times to test

@Fortes_RC_Adv 7 месяцев назад

Great review💪😉✅️

@harleypahlke5935 5 месяцев назад

Solid review! I'm wondering if you know if I can plug an NIMH battery into this transmitter instead of a lipo? I have a few of them lying around from a WPL that's doesn't seem much use anymore

@hofsplace 5 месяцев назад

Hi, you can, but you have to keep an eye on the voltage yourself as the meter inside the remote is set to lipo.

@Calsonic800 6 месяцев назад

Thx for review and showing the difference of the channel modes. Do you think the batterie compartment can take a tray of 2x 18650?

@hofsplace 6 месяцев назад

No, just checked. To long and to thick

@Calsonic800 6 месяцев назад

@@hofsplace Thx!

@adityamody8942 7 месяцев назад

I have a query - can we have the buttons do a progressing movement like - 0 15 30 45 90 degree on each click of a button

@hofsplace 7 месяцев назад

Hi, no, not inside the TX. To do so, you'll have to find a printboard fo in the RX that response in that particular way

@jbml3642 Месяц назад

Hello, nice video, but need help. How to set Gnob 5 (or 6) as EPA for channel 2 - throttle limits?

@hofsplace Месяц назад

That is not possible

@stevekinser-wj6hz 5 месяцев назад

Is there a way to map an external channel dial for steering trim. That’s the only thing I’m not sure on, I’d want an external way to trim. Thanks

@hofsplace 5 месяцев назад

You can use the scroll button to quickly adjust the steering trim

@stevekinser-wj6hz 5 месяцев назад

@@hofsplaceok. I got one on the way to give it a try. Thanks for the reply.

@esthefanydallalba1052 29 дней назад

Nice vídeo, can you help me about this remote? I want to know about some functions and how to do

@hofsplace 29 дней назад

Hi, probably

@andreasborkes695 5 месяцев назад

Hello, great report. I also ordered it and had a curious problem after I did Calibration Steering under "Transmitter Settings 5/5". Now my steering turns 100% to the left only and I can't change it anymore. Even factory reset did not reset it. Do you have any idea?

@hofsplace 5 месяцев назад

Hi, that's a good one. I know in the x6 you have a secret menu to set the end-points, like a calibration menu. Doesn't this have thas well? Never tried myself. And is the servo hoorn properly mounted?

@brunokersmaekers7441 5 месяцев назад

Hi, thanks for the wonderful presentation of the DDF-350. After seeing the video I ordered it with the X10F receiver. I do have a question about this. The receiver has a B+B- connection and a cable is also included. What are these for and how do I connect them? Thank you.

@hofsplace 5 месяцев назад

Hi, it's supposed to be for connecting the battery to it so you can read the voltage on the transmitter. I haven't tried it as I didn't find the manual to be sure and to see how man 'S' it can handle

@brunokersmaekers7441 5 месяцев назад

Oké. Thanks. Keep up the good work. 👍

@matusknives 6 месяцев назад

Very cool transmitter indeed. May I ask how does it compare regarding size and weight to Radiolink RC4GS?. Thanks

@hofsplace 6 месяцев назад

Hi, the DumboRC DDF-350 is much less chunky than the radiolink and has a slimmer overall desing. Weight could be influenced by using different power sources, AA, lipo, small lipo etc

@matusknives 6 месяцев назад

@@hofsplace thank you. I am looking for a transmitter for our 6 year old and the Radiolink is just too large for her.

@hofsplace 6 месяцев назад

@@matusknivesperhaps the Flysky FS-MG7 is than a better choice: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bWxKZgil7wc.html

@salutbonjour123 5 месяцев назад

Hi guys, My receivers don't seem to match a certain gyro I want to use on my drift RC car. Maybe you'd know of a different receiver I could use to match the PWM frequency of my high end gyro (333hz). I'm using a x6fg receiver and even after trying multiple ones it still doesn't steer even if the gyro itself can move the servo just fine. I haven't yet tried a x6dc, x6yc or x10fg. If you can find a solution to my problem I'd be greatly grateful. Cheers

@hofsplace 5 месяцев назад

Hi, ai, difficult one. I've got the X6F and X10FG. Mine 6 doesn't have a gyro, the then 10 does, but haven't tried it as it's in mine BRX02. If I've got spare time, I'll look into it

@jonthomas8487 Месяц назад

Are any of the 3 position switches momentary? I’ve found that slider switches aren’t great for winch control but momentary button switches work well

@hofsplace Месяц назад

Hi, no it's a locking 3 position. But if you're handy, you can install it yourself. Or use the winch mix option in the menu, then you can dedicate 2 momentary buttons for the winch controll

@jonthomas8487 Месяц назад

@@hofsplace it’s a bit frustrating the budget transmitter companies haven’t included momentary functions on their transmitters yet

@hofsplace Месяц назад

@@jonthomas8487 momentary means it is auto resetting. So it will not be locked/unlocked. With the build in software you can dedicate it to function as a locking or inching knop.

@nic.25 Месяц назад

I was considering getting the Flysky gt5 until I saw your video, does the dumborc do firmware updates?

@hofsplace Месяц назад

Yes it does. If had the Flysky as well, i prefer the DumboRC

@63MemoryLane-gw1cv Месяц назад

Somehow my steering is stuck at 100% left! How do you do a factory reset? I tried several times and it won't work.

@hofsplace Месяц назад

Hi, did you try: Transmitter settings/ page 5, calibration, steering?

@IIIxwaveIII 5 месяцев назад

do you know if the new ddf-350 will work with the "older" dumborc recievers X6F(G)?

@hofsplace 5 месяцев назад

Yes, they work!

@salutbonjour123 5 месяцев назад

Can you fine tune the gyro or is it only the gain that can be adjusted?

@hofsplace 5 месяцев назад

@@salutbonjour123hi, you shoult be able to, but I didn't tested it yet

@ballzcw204 5 месяцев назад

Contemplating getting rid of my dx5c and my Dx5 rugged an switching to this one? Is it a good or dumbo Idea😅

@hofsplace 5 месяцев назад

Haha, I think you should switch! I didn't expected it to be this good. It now my favourite to go with

@JN-qr4yt 5 месяцев назад

Wow great demonstration! My question is have you used the voltage return function to view the battery voltage on the receiver? I believe it's the B+ and B- on the receiver that connects to the batt via a cable or something to supply voltage info. I'm trying to find information on how it works but it's hard and you seem to have the most knowledge.

@hofsplace 5 месяцев назад

I have the same thoughts and the same problem. Can't find any information, but I assume it is the B+ & B- for battery information

@chocoboultimo2994 4 месяца назад

T see ur car battery, connect the lipo to the b+ and b- on the receiver..

@tomv3361 Месяц назад

Yes you can. There's a dedicated port on the receiver and as soon as you plug your battery voltage in there it appears on the screen of the radio. Very neat. Just to be clear when you plug your battery into the dedicated port on receiver the other channels ( servo etc.) will still get 6V from the esc.

@drclos08 3 месяца назад

excellent video, quick question what is the model number of the lipo your using? thanks man!!!

@hofsplace 3 месяца назад

This is a different one, but will fit when the AA holder is removed: s.click.aliexpress.com/e/_EyGrJsz

@MrGallotole 2 месяца назад

Hello, do you know if the type C connector is used to charge the battery? thank you

@hofsplace 2 месяца назад

Not sure about that. Would recommend to charhe it separately

@MrGallotole 2 месяца назад

@@hofsplace Hi, I just checked that the transmitter does not send voltage to the battery door so you have to charge either lipo or batteries outside the transmitter. Best regards

@hofsplace 2 месяца назад

@@MrGallotole super, 👍🏻

@paulnorton7444 2 месяца назад

Hi great vid, can you put end points on channel 3 for example for a two speed gearbox.

@hofsplace 2 месяца назад

Thank you 😊, yes, that's possible

@tomv3361 Месяц назад

Yes you can. I use it for a TRX-4

@Ethericbikes 5 месяцев назад

This dumborc or the flysky nb4 for best performance?

@hofsplace 5 месяцев назад

The DumboRC is my new favourite

@ElPunto620 4 месяца назад

Is deze zender ook geschikt voor 1/28 drift auto’s ?

@hofsplace 4 месяца назад

Ik zie niet in waarom dat niet zou werken.

@samoutdoors863 3 месяца назад

Solid review, which reciever would you recommend?

@hofsplace 3 месяца назад

Depends on your needs. I use 6ch with lights or the 10ch one

@lmadigan1971 5 месяцев назад

GREAT CHANNEL HERE SUBSCRIBED

@hofsplace 5 месяцев назад

Thanks!

@rizmanharris 3 месяца назад

Hai. Can x6f receiver use on this ddf 350 ?

@hofsplace 3 месяца назад

Yes you can. Previous receivers will work with the DDF-350

@rizmanharris 3 месяца назад

thanks @@hofsplace

@salutbonjour123 5 месяцев назад

Wish these conteollers came from factory with 18650s quick swap and usb rechargeable

@hofsplace 5 месяцев назад

Well, I'm happy you'll have to options for a lipo. Better that than always the AA's

@Xbot4Life Месяц назад

a standard DUMBORC radio has 5 dials for trim and gyro, this only has 2, How can this replace a radio with more than 2 turn-dials?

@hofsplace Месяц назад

Everything is set inside the menu and is very easy due to the display

@Xbot4Life Месяц назад

@@hofsplace understood, thanks

@BrendenPham01 4 месяца назад

how does it compare to the flysky gt5 or g7p

@hofsplace 4 месяца назад

I like this better

@woutervanwijk4369 5 месяцев назад

Is er ook een remlicht functie?

@hofsplace 5 месяцев назад

Dat hangt niet af van de zender. Dat heeft met je ESC, Receiver of losse licht module te maken

@woutervanwijk4369 5 месяцев назад

@@hofsplace ja sorry, ik bedoel ook de x10 receiver die erbij zit. Maar ik kan beter voor de x6dc gaan.

@hofsplace 5 месяцев назад

@@woutervanwijk4369 hoi, ja, voor verlichting kun je beter voor de X6DC gaan, of deze losse module: s.click.aliexpress.com/e/_EJcrOsh

@pandacrawler6x6 7 месяцев назад

A great Review and a nice Tutorial my Friend!!! Is one of the radio i'm looking for and your video is a good Help 💪🏻🏆👍🏻! Thks my Friend for the share! 💪🏻🐼🐻‍❄️👍🏻 P.S. did you received my email that i send some time ago?

@hofsplace 7 месяцев назад

Thanks, yes i did. Before I enter, I like to extend my course.

@pandacrawler6x6 7 месяцев назад

Ah ok ok! I understand! Looking forward to a very nice event from you my Friend!!! Cheers!!!

@drayrz1792 4 месяца назад

Heeft deze ook een ingebouwde failsafe?

@hofsplace 4 месяца назад

Bedoel je voor nitro of electro? Bij electro, als je de remote uit zet, stopt de wagen. Nitro weet ik niet omdat de servo's dan naar 0 moeten gaan.

@sandunpathirage7308 6 месяцев назад

Radiolink rc6gs v3 VS dumborc ddf 350. what's the best one. please help

@hofsplace 6 месяцев назад

For me, definitely the DumboRC

@polishguywithhardtospellna8227 4 месяца назад

That is a question with MOST obvious answer.

@power21100 6 месяцев назад

compare it to radiomaster mt12

@hofsplace 6 месяцев назад

If you sent me one 😉, haha, currently I haven't one. For now, my focus is more RC cars than accessories.

@power21100 6 месяцев назад

@@hofsplace i just got mine from the mail a few hours ago, haven't opened it yet since im at work now 😔

@return_to_agartha Месяц назад

And... it sucks. It will not allow mixing of any channels tied to throttle ch2 or steering ch1. What's the point of all the switches if I can't mix 4ws or dual throttle motors???? True DUMBO fashion, literally. Or maybe I'm just the dumbo and couldn't figure it out. 😂

@hofsplace Месяц назад

Did you do the firmware update?

@return_to_agartha Месяц назад

Lol no! There ya go I AM the Dumbo! Too bad too I really liked the radio otherwise but already returned it and kept the RC6GS which isn't great either but at least can mix throttle and steerings with other channels and a switch out the box. I didn't know it needed firmware that is dumbo 😝

@return_to_agartha Месяц назад

@@hofsplacedoes the firmware for sure give ability to mix ch3-12 with channels 1 and 2 and different switches?

@hofsplace Месяц назад

@@return_to_agartha can't say for sure, but it's worth a shot