The Nintendo 64 Gets A New Less Expensive Hi-Def Mod!

Подписаться 252 тыс.

Просмотров 231 тыс.

50% 1

A New Cheaper Internal HDMI Kit For The Nintendo 64
Since 2021, the only digital-to-digital HDMI mod for the Nintendo 64 came from the company PixelFX with their N64Digital. That kit is amazing and has a ton of features, but it’s a bit on the pricey side. Well now there is a new internal HDMI mod that is a bit more affordable. GameBox Systems will soon release the 64HD kit, a cheaper digital-to-digital HDMI kit for the N64. Let’s take a look!
// Purchase The GameBox 64HD Kit:
USA
► Castlemania Game (affiliate) Use Coupon Code TITO to SAVE 10%: castlemaniagames.com/products...
► Stone Age Gamer: stoneagegamer.com/gamebox-64h...
UK
► Zed Labs: www.zedlabz.com/collections/r...
► HDMI to Component Converter: amzn.to/3IrAhgu
// Other Links:
► PixelFX Video: • PixelFX N64Digital Ins...
// Support Macho Nacho:
► PATREON: / machonachoproductions
► MERCH: macho-nacho.com/shop/
► WEBSITE: macho-nacho.com/
► JOIN our DISCORD Community: / discord
// Follow Me On Social Media
► Instagram: / machonachoproductions
► Facebook: / machonachoproductions
► Twitter: / machonachomedia
---
Timestamps
0:00 Intro
2:28 Parts of the 64HD Kit
4:00 How To Install The 64HD
12:29 Features
16:43 Pros and Cons
18:49 Price
-----
// SAVE MONEY at these Retro Modding Stores! (Affiliate Links Below):
► SAVE 10% by using COUPON CODE: TITO on any purchase from RETRO GAME: TITO on any purchase from RETRO GAME REPAIR SHOP here: retrogamerepairshop.com/?ref=...
► SAVE 5% by using COUPON CODE: MACHONACHO on any purchase from RETRO MODDING here: bit.ly/39hHnz7
// TOOLS AND GEAR I Use For Video Game Console Modding (Soldering Equipment, Flux, Kapton Tape etc) (Affiliate Link):
►SRA Flux Pen: amzn.to/2CmPX4U
►Circuit Board Holder - amzn.to/2zV7VuC
►28 AWG gauge wire: amzn.to/2Ni1V22
►Wire Stripper/Cutter: amzn.to/3hQ7fb2
►Silicone Mat for soldering: amzn.to/314rc88
►Kapton Tape: amzn.to/3xFk4wp
►iFixit Toolkit I use for all my projects: amzn.to/2CnJEOt - Everything you need!
►Hakko FR-301 Desolder Gun: amzn.to/2E8P2X3
►All other stuff I use: www.amazon.com/shop/machonacho...
-----
// MY VIDEO and AUDIO Equipment (Amazon Affiliate Links):
-Sony A6500 Camera - amzn.to/39FSxQa
-My Absolute Favorite Lens - amzn.to/308Zm9O
-Zoom H4N Audio Recorder - amzn.to/2CR5LxF
-Aston Origin Microphone - amzn.to/3hPnap0
-Atomos Ninja V External Recorder - amzn.to/3fcq3i6
-----
// These stores provide fantastic Gear and Mods for Retro Consoles! If you use the following links below, I received a small percentage from sales at no cost to you. This is a great, free way to support the channel!
○ Retro Game Repair Shor (Tons of Game Boy Mods)
► retrogamerepairshop.com/?ref=...
○ Retro Modding (Lots of Handheld Console Mods)
► bit.ly/39hHnz7
○ Stone Age Gamer (Flash Carts and other great Retro Tech)
► stoneagegamer.com?afmc=MACHONACHO
○ eBay (Second Hand Retro Gaming Gear and More. It’s where I buy a lot of the consoles I mod!)
► ebay.us/NCwNkl
○ Sendico (Proxy Service to bid on Japanese Auctions. I use Sendico to get great deals on Retro Consoles directly from Japan!)
► sendico.com/referral/MachoNacho
-----
// Intro Music for Retro Renew Series by Matthew McCheskey:
► matthewmccheskey.bandcamp.com/
-----
Disclaimer: This video is only for entertainment purposes. Any injury, damage, or loss that may result from improper use of tools, equipment, or from the information in this video is the sole responsibility of the viewer and is to be used at the discretion of the end user/viewer and not Macho Nacho Productions or Tito Perez. If you are uncertain about any step of the process or feel unsure about your skill level, seek a more authoritative source.
Affiliate Disclosure: I get a small percentage of each sale that uses an affiliate link or coupon code. It’s a great way to help SUPPORT my channel at no cost to you so I can continue to make these videos for all of you, everyone wins! And as always, thank you for your continued support of my channel!
#Nintendo64 #Nintendo #MachoNachoProductions

Игры

Опубликовано:

17 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 499

@MachoNachoProductions Год назад

Hey everyone I made a mistake in the video. The N64Digital was not the first HDMI mod the N64, that was the UltraHDMI kit. Thanks to those for correcting me!

@Yami_Industries Год назад

where do you get your music for your videos? it makes your videos so chill and laidback

@GatorRay Год назад

It's fine. UltraHDMI first came out a while ago.

@aplsed Год назад

In your defense, I don't think the UltraHDMI has been in stock for a WHILE.

@aplsed Год назад

@@Yami_Industries *Salt Lamp by Jobii* for the main video, and his intro is in the description.

@seethruhead7119 Год назад

I'm very happy with my UltraHDMI n64. One of my favourite system setups still.

@Gawnzilla Год назад

Tito, a side by side comparison of the gameplay would be fantastic. A bonus to that is if you included 2 others into the mix (Eon’s Super64 and/or an RGB mod).

@jamest3402 Год назад

Came here to ask this very thing! I have EON adapter and I’d be curious how this stacks up

@shaun8062 10 месяцев назад

@@jamest3402 me 3

@juiceman8873 7 месяцев назад

Me 4

@masondula 6 месяцев назад

Me 5

@ModzvilleUSA Год назад

Beautifully done! Looking forward to installing one of these bad boys. I'm sure it's already been said but before the Pixelfx kit there was the UltraHdmi. I believe it was one of the first kits of this nature to ever come out along with the HD Nes. The installation for the Ultrahdmi and N64digital are nearly identical.

@triton199 Год назад

Marshall was the first for n64 hdmi mods anyway, also the first properly good n64 flash cartridge with the 64Drive imo lol.

@MNDude Год назад

Awesome guide! I'm not very good at soldering and don't really do it often but I somehow managed to get the ribbon cable right first try thanks to your tips.

@NikonRaccoon Год назад

Thank you for posting this. I had been looking for a guide to upgrading my N64, but was balking at the prices of current HDMI solutions. I went ahead and preordered the mod from Castlemania , and your coupon code worked with it. Thanks again!

@ScruffyLookinRGB Год назад

Nice video as always Tito! I was just looking at the ultraHDMI kit the other day. You have impeccable timing my friend.

@MachoNachoProductions Год назад

Nice!!

@joe-edward Год назад

Thanks for the video, Tito. Great content as always. I would like to see that comparison video, especially a side-by-side of the best quality picture each kit can render on your HDTV.

@Druid_Plow Год назад

7:09 That's the best solder job I have personally seen you do. Good work brother 👍

@BaconTopHat45 Год назад

Awesome! I'm glad we are finally getting more competition in this space. I really wanted to do one of these mods but the N64Digital and UltraHDMI Mod are just a bit too expensive for me. This is still higher than I'd like but it's in a bracket I can accept. Should be a reasonable quality improvement over the retrotik without RGB chip I'm currently using. Plus I'll have less of a spaghetti of cables behind my TV. Pre-Ordered with your code, Thanks!

@Nexxxeh Год назад

Your production is a work of art. Even when the content is about something I'm not explicitly interested in, you make it engaging, informative and great to watch. And in this case, I'm very interested. I'd love one of these, and the features set is more than sufficient. Cheers Tito, have a great weekend!

@Gigatech151 Год назад

I really like those Pro and Cons segments... something can't seem to find on other videos. Thanks a lot for the video.

@koreyf Год назад

I love watching your videos. They're very zen and you're editing is great. Maybe one day I'll actually use a soldering tool. :)

@davidt3563 Год назад

Gotta love the community! Thanks for taking the time to show us this!

@dwightdixon8508 Год назад

I’ve got the UltraHDMI mod on my N64 and the results are incredible but costly. Mostly due to its rarity due to “shortages” but also cuz it takes great soldering skills to install. This looks to be pretty much on the same level and hopefully bring down the costs of the other HDMI mods for the N64. Very cool

@seethruhead7119 Год назад

I bought mine preassembled. It. was. not. cheap.

@datamanmachine Год назад

I bought it directly installed from the guy who makes these ultra hdmi kits! He lives in a neighbour country! Cost me 250 € console only around 2017-18.

@C2_Psychotic Год назад

I bought a preassembled off EBay in 2014 for $450. I'm afraid to see what it is now lol

@amanpretbasuita2725 Год назад

I payed $450 CAD for it to be installed in my N64. I love the system, so no regrets.

@reboxtherapy Год назад

That one is worth it, especially if you want to.use both CRT and lcd

@joeklees3179 Год назад

Nice Video I cant thank you enough!! I came across this video about 2 months ago. Purchased the MOD with your coupon code. Received the mod yesterday and used your step by step video to mod my N64 and it works perfectly! Thanks!!!

@devsfan1830 Год назад

The N64Digital isnt the first or only hdmi option. There is the UltraHDMI but given the horrorshow group buys needed to obtain one yeah i suppose you can consider that a non option. Great video as always!

@MachoNachoProductions Год назад

You’re totally right, I completely forgot about the ultrahdmi! I made a pinned comment making the correction. Thank you!

@blakkpatron Год назад

I jumped on the uldrahdmi when it first came out and commissioned badassconsoles to do the install for me, when I got the n64 in the mail the hdmi needed to be propped up to have a proper signal(probably the result of a poorly connected hdmi port to the board) I returned the console to him to have it repaired(at the same time I sent him another console so that he could do a shell-swap) after some back and forth regarding him shipping the console back to me he stopped responding to my emails(the last email I got from him was december 2018) all in all I lost 2 n64's from this and one ultrahdmi board+money for shipping. needless to say this whole experience put me off from ever trusting any installer again. maybe this new board is something I could try to install myself.

@illn0r Год назад

I was lucky to dodge that 'tornado'! Got mine just before things turned to crap.

@triton199 Год назад

it's unfortunate that you got screwed by a shady installer I know Marshall personally, and I don't like people like that giving my friends product a bad name. I've built 6 ultraHDMI consoles so far with zero complaints or returns. it's a relatively straightforward mod for someone with decent soldering skills so there's no real excuse for that

@triton199 Год назад

if you're in the US and ever want an hdmi mod installed shoot me a message and I'll give you a good deal. hardly makes up for getting ripped off before but it's something anyway lol

@TonyDrecaps Год назад

Great video and great tutorial! You should keep doing more soldering mod videos 👍

@ApexOT Год назад

Love all of your videos! Thank you for all the information you put out about retro consoles.

@MachoNachoProductions Год назад

Thank you 🙏

@GatorRay Год назад

YAY! I've been hoping you'd cover this mod since I first saw it on StoneAgeGamer.

@tigheklory Год назад

Awesome video as always Tito!! I really need to install that Ultra HDMI I have had in my cabinet for years.

@ParkerAWade Год назад

I’d love to see some comparison vids! I just received the kit and I’m switching from my eon super 64 +MClassic which is a surprisingly high quality plug and play option, albeit a little expensive. I plan on running this through the MClassic as well so I anticipate a pretty decent improvement. The MClassic really seems to add the much needed umph to hdmi converters. Thanks for the vid!

@shaun8062 10 месяцев назад

well? any updates? I too use the EON with the mClassic and have for years now. What's your verdict on difference in picture quality and price?

@pankbot Год назад

Perfect timing!! Just picked up a N64 the other day along with a Dreamcast. Would like to see more N64 mods if possible.

@atsz. Год назад

I like that you can just get a clean de-blurred signal out of it. Then you can feed it into your retrotink5x via an hdmi to component adapter and use that for all your advanced features.

@Cellsplitter Год назад

I own a PixelFX myself already but this is great that we're getting more options! Just sitting here waiting for that PS2 HDMI mod to release one day now 🤞

@MachoNachoProductions Год назад

Me too! Hopefully soon

@genitalgrinder5704 9 месяцев назад

Wow you are really good at soldering. That was so satisfying to watch!

@ToxcynArcade Год назад

Yes! Thanks for the Video. I preordered a few weeks ago and I’ll be using this as my guide.

@keepwatchingthat Год назад

This is such an underrated channel been following for a while how does it only have 100k subs

@MachoNachoProductions Год назад

Thank you for this comment dude. Means a lot! 🙏

@alexis7APperez 11 месяцев назад

i love these videos and the intro music is a banger, got me dancing a little as the consoles spin lol

@Evercade_Effect Год назад

I like clean mods like this with the printed brackets and all.

@StefanMArndt Год назад

I just got mine, yesterday, and got it installed just now. It works great! So glad I saw this video when you posted. I ordered immediately. nearly 2 month wait, but this is what I have been waiting years for.

@jamessmyth3952 Год назад

How do I order one?

@eol6632 Год назад

Good idea if your doing this would be to replace the caps first. Makes it a bit easier than trying to do it around a flex cable or having to remove it.

@lucasRem-ku6eb Год назад

did you install it yourself, mos vets removed, why you do that, is that a hobby you do ? is it still operative now ??? Broken i guess !!!!! U use fake account, the channel you is empty ! Just upload it, so we understand what you say here!

@8bitnation419 Год назад

It’s great to have yet another option. There is also the RGB Advance which is of similar quality to the N64 HDMI mods. Hopefully they manage to keep this in stock. I would love to see an RGB add on board for those that also want to add in native RGB support. I love to be able to have the option to hook it up to a modern tv and then a CRT using RGB cables.

@andrebrait Год назад

IIRC N64Digital also adds RGB to the multi-out. RGB can also be added with other, cheaper mods.

@llnemesisll7129 Год назад

I got the RGB mod but instead of using scart cables I used hd retrovision component cables on a hd CRT. Looks really good but haven't been able to get an HDMI mod yet. Expensive

@James_D. Год назад

Very nice kit! I like that you don’t need to cut the shell to fit the mod. 😃

@lucasRem-ku6eb Год назад

How did you install it, you made the board yourself, of did you send it to someone. Better than a Dolphin machine ?

@triton199 Год назад

you dont have to cut the shell for ultraHDMI either, you can 3d print a replacement A/V shell and a small spacer/tray that fit into the console so you don't have to cut anything

@SrtRacerBoy Год назад

Its a cool kit. I'm already VERY happy with my PixelFX kit. Love their kits and the fact they support their products FAR after release (like my ps1 getting a PS1Digital update)

@MachoNachoProductions Год назад

The pixelfx kit is great!

@ModeSOLOgaming Год назад

I really want to get into modding consoles and hopefully I'll be getting a soldering iron soon. I just gotta get an idea of what to start buying, and what to start practicing on.

@TheAnimeexpansion Год назад

Nice video as always! I would be interested in the head to head, I already have the N64Digital and it is superb! I was considering installing one of these but the lack of features, limited display options and issues I've had with outputting on my primary TV with their GBA kit left me wary

@hariline8769 Год назад

Very awesome mod definitely Something I would want to look into it would be even better if the mod included an Optical output for crisp quality but the onboard HDMI Audio must great tho no doubt

@johndlr Год назад

Great video as always. Would love a comparison between the UltraHDMI and the GameBox 64HD Kit.

@MachoNachoProductions Год назад

Need to get my hands on a ultrahdmi. That could be a very good comparison video

@kazinwho Год назад

Oh heck yes, I just ordered one of these, I'm so glad to have a Macho Nacho video to follow along to while I install it! lol

@MachoNachoProductions Год назад

Nice!

@kazinwho Год назад

@@MachoNachoProductions Successfully installed mine last night. Whew! Thanks for this video Tito, it helped tremendously.

@stephenshelottiii3272 Год назад

You never cease to amaze me with your soldering skills. I think this will be a great budget friendly option. I would like to see a comparison, however I don’t think there will be too much difference with the same settings enabled.

@spider2021 Год назад

I absolutely love your videos. Clean, to the point, and no filler. Keep up the great work.

@moveit05 Год назад

This is a great option.awesome tutorial...Quality video like always..👍

@paulanderson929 Год назад

Always wanted an HDMI Mod for my n64. I just pre-ordered this. Way excited for it!

@geepeso84 Год назад

Hell yeah! I wanna get it myself but I gotta wait and save up some scratch! I just installed the picoboot on my GC with helders ribbon cable for the ipl chip. And boy was that installation awesome! Didnt realize it was such a small chip. I haven’t soldered anything since electronics class in jr high school back in 1997. Its my first ever mod! They always look bigger in all these install videos lol. Good luck dude let me kno how it goes.

@cedonuli Год назад

Would love to see the side by side comparison you’ve mentioned

@literealm Год назад

I'm in for one! I've been wanting an HDMI kit for the N64 for awhile now, only really wanting a clean, digital output, so this kit is more than fine by me. The price definitely still hurts a bit, but it's at least a price I can stomach.

@ScorpioCesarcade Год назад

Would love to see a side by side comparison of gameplay amongst the different hdmi mods and possibly against the rgb mods available. Been looking to send my N64 in for modding but still unsure which is the best way to go. One of these hdmi kits or an rgb mod hooked up to my retrotink 5x. 🤔

@Finakechi Год назад

A couple of comments about the 240p mode. It's more than likely that a large number of HDMI to component, and also HDMI to VGA adapters will work with it. You will occasionally run into some issues with that low a resolution, but it's technically part of the HDMI standard so I bet it would work more often than not. You'll also often get a sharper image just because you're using a more modern DAC than what was originally in the console. And there's one other use for the 240p mode, future video scalers with an HDMI input. For example, the upcoming RT. 4K will have an HDMI input on it, and using that 240p mode will get you a pure digital signal throughout the entire chain.

@sokmunky4104 Год назад

I picked up one of these from Stone Age Gamer. It works great when it works. I am going to assume there are going to be some upset people because I have tested this one several on different LCDs and some do not like it at all. It will not work on my computer monitors, but it works great on my crappy viso TV upstairs, but only on 720p. The other modes just flicker and won't sync. 1080i has colored lines on it and won't fill the screen. It won't work at all on my Amazon fire TV down stairs. I am going to experiment with different HDMI cables because I know that can have some effect, but I know other people are going to run into this same issue. I thought I had messed up soldering and redid the entire mod, but it still has the same issues.

@BrandonTweed Год назад

I’ve just done two of these, and tested two of everything in my chain (N64, 64HD kit, hdmi mini, and monitors) and get the same video issue.

@c0rnd0g_19 Год назад

Amazing! This is great news for me, I had a couple UltraHDMI's on order when the pandemic hit and due to job/family issues had to back out. Luckily, things are back to normal but I'm still wanting to get my N64's upgraded. Another bonus is you can just order one of these and not have to get in on a group purchase and wait for eons!

@lucasRem-ku6eb Год назад

backout, family job HDMi ??? you run weird business, more we don't understand... Covid, back to normal you failed in i see ! Bonus ? why you wait ?

@timterrell8678 11 месяцев назад

We all seen the bridge you made on pins 6 and 7 before showing the final shot lol.

@johnnysmythe2552 Год назад

2 quick things- firstly thank you for the helpful guide. It made installing the 64hd much easier. 2nd - although all my original games work fine with this mod, the everdrive 64 (v2.5) I purchased in 2019 has menu issues- meaning the menu doesn’t work. I can still blindly launch games on it, but the menu is scrambled. If you own an everdrive and want to do this mod, for sure the 2.5 doesn’t work. If any other one does please let me know. The everdrive works fine with composite cables still just not thru hdmi

@oscarcamey8 Год назад

It would be interesting how a retrotink would compare to them! Even the eon64

@adilator Год назад

The indents in that flex cable design are a genius idea.

@MachoNachoProductions Год назад

It definitely helps with the alignment

@MBJ84 Год назад

Nice profile pic 😂

@triton199 Год назад

ultraHDMI did the same, makes getting the ribbon cable lined up a breeze

@boothy128 Год назад

Let's see that comparison video! I have the ultrahdmi mod so would love to see that included if possible too please

@arturiozzi1835 Год назад

The ideal solution for me would have been 4x integer scaling to a 960p window inside a 1080p frame. Or even 5x scaling (1200p) cropped to 1080p, since many N64 games had black borders anyway.

@Acemans Год назад

i would love to see more about this. You have more videos on this planned?

@SeeJayAre Год назад

Very impressive! great video as always...

@devikwolf Год назад

Really excited for this! I've wanted an HDMI N64 mod for a while -- I have great mod-free image options for lots of my consoles, but the N64 remains elusive!

@NL_the_Godfather Год назад

You can buy a N64 cable to hdmi adapter. Works really well and is way cheaper then any mod.

@devikwolf Год назад

@@NL_the_Godfather Not anywhere near the same quality. The point isn't connecting it to an HDMI screen, I have a dozen ways to do that. The point is image quality. The N64 outputs at best an SVID signal natively. And most MultiAV HDMI cables don't even use the svid lines and instead use the composite video input, perform a VERY basic conversion, and call it good. Usually chroma issues. And unless you're buying it from a company that specifically stocks HDMI adapters for retro consoles, you can be dealing with latency, tearing, and other issues. My (unmodified) SNES, by comparison, outputs an image essentially free of artifacting, by using its native RGB output via a component video cable to a TV which has analog component support. The N64 lacks a native RGB output, so the only option for a comparable mod is to tap the RGB video output directly from the RCP.

@NL_the_Godfather Год назад

@@devikwolf ok thanks for explaining. I myself will stick to this adapter though because it’s so much cheaper. Only cost me €10,-. I usually play N64 on emulators anyway and not that often in general. So over €100,- is to much for me excluding the fact that it still needs to be soldered correctly. If it was cheaper and plug and play i will certainly consider it.

@the13th Год назад

Amazing video Tito. Ive been wanting a pixelfx from the moment you featured it but its just simply impossible to get your hands on so that's a benefit to this as well. Only one question is whether this is pal compatible or not?

@XipherDesign Год назад

your instructional videos are just top notch 😇 I watch them when I'm at work 😁

@MachoNachoProductions Год назад

Thank you Xipher! I’m glad I can keep you company while you work 😁 Hope you’re doing well buddy!

@GRiNDWiZARD187 Год назад

that is a quick & easy job , nice!

@tuck9799 10 месяцев назад

I'm an IPC J-STD Trainer and just wanted to say you have great technique. There are two things I saw that you should be aware of if you're going to do many more of these. When you ran the jumper wire to the PIF chip, you never run a jumper wire on top of a component. The other issue I saw is more of the design of the conversion kit and nothing that you did. The flex cable sits directly on top of several transistors. Those get hot by nature, so I would imagine they will cause an issue eventually. Adding several layers of kapton tape to the underside of the flex cable where it touches the transistors would probably fix that.

@RSCOZZY Год назад

Fantastic video man 👍 What is that piano hip hop track you use?? Love it! Please let me know 🙏

@ShadowLordxsx Год назад

I thought about doing this and getting some of the "forever memory cards", but I do not have enough confidence in my soldering skills to even attempt that fine of soldering.

@gongryan2984 Год назад

Great video as always and can’t wait for your new studio. Quick question, why is no one making Wii HDMI internal mod any more? Wiidual or whatever is called is not available for long time. I want Wii to have a better video quality than what it is now…

@TheUberdude187 Год назад

I use a RAD2X cable for my snes and n64 works great and no need to internally tinker with them

@uk4890 Год назад

Amazing!! Is there any option to improve the framerate of the N64 with more cooling, overclocking or third party expansion pak with more memory?

@pukalo Год назад

And I thought I was clever for adding a thermal paste connection between each of the layers of metal between the N64 components and the heatsink to assist with cooling.

@segare-trop-vieux3932 Год назад

Great video, as usual for this channel. I have seen many different hdmi mods for consoles but there is still one that is missing…. The Sega Saturn. I really wish that we can get it soon.

@SeekingTheTriple Год назад

3:48 At this part, I was thinking I could just look through my jungle green n64 to see what model it is and turns out, you can! Its a CPU 08!

@MachoNachoProductions Год назад

Haha nice! I love the clear shells so much

@ratykat Год назад

Thanks for another great video Tito!

@darkally1235 Год назад

For CRTs I'd recommend using an S-Video cable. It will provide essentially the same quality at a much lower cost.

@DonovanCalebStewart Год назад

Hey Tito! Quick question: Where can I buy a flux dispenser like the one you have at 6:28? I see you have a flux pen in your description but not a flux dispenser like the one in the video. I'd love to buy one. Thanks!

@cbk12 11 месяцев назад

Can you do a follow video on how to update the firmware. I ordered the device they call for, but just need a little help. Thought a follow up video would be perfect 👌especially since it fixes the 1080i issue they say

@bobrocks95 Год назад

I'm confused by the 720p mode not filling the screen. Isn't a 3x integer scale 960x720, which would then be scaled by a 1080p screen to fit perfectly? The "proper" mode looks like 480p in a 720p window. Also, is there pixel shimmer on 2D games in that TV 1.5x scaling mode?

@Swier3D Год назад

MakeMhz is in the process of making an HDMI mod as well. The more the better. Maybe I won't have to sell my left arm just to see 240p

@briankleinschmidt3664 Год назад

It came out in '96. I got one second hand and I recall Mario Kart was the only game I remember playing. I'm sure I had 007, but I can't remember playing it. I had Mortal Kombat, but I sucked at it, and never played.

@davefitzpatrick83 Год назад

Great video! Any idea about lag VS the PixelFx mod? Thanks!

@PimpinFAR Год назад

Just tried to hook the cable to the pins and it is RIDICULOUSLY more difficult than you made it seem with how tiny the pins are!

@mrej112 10 месяцев назад

Its pretty allright, just made 2 of them this evening :)

@Angel-mt8eg 5 месяцев назад

@mrej112 I just finished installing this mod myself and was wondering if you had any audio issues? When connected via HDMI I get no audio, but when I go back to the composite cables the audio is fine.

@CulichorHimself Год назад

Great video, in your personal view, how the image compare to E·O·N Super 64 with RGB mod? My N64 is mod with RGB and using E·O·N Super 64

@izzieb Год назад

With regards to the flex cable, is there a reason they couldn't have unconnected pads for the first and last pins or something, to help with alignment and ensure people don't solder it to the wrong pins? I feel like that would be a minor change that wouldn't cost much to implement and would make installation much easier for people.

@vgrepairs Год назад

that's a great idea but an even better one is paying close attention to the instructions...which would cost $0 and negate the need for that. :P

@ceff01 11 месяцев назад

@@vgrepairshelp please I soldered but signal shows static colour lines.

@vgrepairs 11 месяцев назад

@@ceff01 you did it wrong

@ceff01 11 месяцев назад

@@vgrepairs yes but how and i also broke black pin to hold in flex cable how to keep that in aswell please

@ceff01 11 месяцев назад

@@vgrepairs is that all you say you done it wrong

@OldSchoolDudeGaming 10 месяцев назад

Its amazing that you get to keep the original AV port so you can still play it as originally inteded.

@metl_play Год назад

I really think by the size of the N64, there should be a full sized HDMI port possible.

@v2joecr Год назад

Exactly that looks like they have more than enough room for a full-sized HDMI port.

@NLRevZ Год назад

First of all, great video! This is getting my hopes up, *but..* I know the product description says 'compatible with all models' but I still want to know if this will help remedy a very specific problem I've been experiencing: My N64 has the NUS-CPU(P)-01 board since it's an early PAL console so it currently has the S-video out that was never officially used by Nintendo in the PAL region. When I play my PAL games it works brilliantly (though obviously not nearly as good looking as any of the digital video mods would), but when I try playing some game mods such as Banjo Dreamie which only comes in NTSC, I get a weird NTSC443 output that my S-video to HDMI converter has trouble with (flickering vertically, not syncing properly). When I use the composite output straight to my TV, my TV is able to display the signal properly though. It may seem obvious but given the price I'd want to be absolutely sure: This kit should work with the PAL board as well as circumvent the whole analog signal generation circuitry and thus eliminate the above signal incompatibility problem when using out-of-region games, correct?

@yeolemillinial8295 Год назад

fx box also doing a 3 tiered board option soon, one of 480p max only so now i'm wondering what the price point between these two will be

@Ranesbane Год назад

I've watched a lot of your videos trying to learn how to mod my systems and what are the best mods for decent prices and all that. I really like your whole format and style and appreciate everything I've been able to learn from you. But I've watched 2 of your N64 hdmi mod videos and they both bug me so much that you don't seem to have the screw that goes next to the first two controller ports 😂 Edit: I retract my previous statement. I started to pay attention during other videos and that seems to be the case with all of them. Keep on rocking sir!

@crestofhonor2349 Год назад

My favorite mods are always the ones that let you keep the analog out port. Never liked removing those as I do tend to use old consoles on my CRT. I also like CRT filters but they never seem to get them right outside of stuff like the OSSC and the Retrotink

@Acemans Год назад

this looks way more simpler than the Ultra64

@joseluisruiz3789 Год назад

Interesting, i have the Retro Active Ultra HDMI kit on my N64 that i installed back in 2017 and thought that that kit was the first company to make a HDMI mod for the N64. This is new to me but a whole lot cheaper than what i paid. Glad there is still mod support for the N64 though. 😎👌

@NL_the_Godfather Год назад

What did u end up paying?

@d05music17 Год назад

Excellent video dude, do that comparison pls 😊 totally awesome content as always

@MachoNachoProductions Год назад

I may have to source a ultra hdmi and do a 3 way comparison.

@cbk12 11 месяцев назад

Can you please show how to update the firmware on this. It looks alot of changes and fixes were made but the instructions on github are kinda vague. Would be a great follow video.

@Ricar2002YT Год назад

Oooo, this might be perfect for me! I got an n64 a few weeks ago, let's see what this is all about :)

@noahjdavis7396 Год назад

Hey Tito! I was wondering if you have checked out the GBA DSi TFT HDMI kit or if you had any opinions on it

@natanaelfernandez Год назад

Tito, hello from the Dominican Republic, I have a question for you since I am interested in making this mod... Once this mod is installed, the original video output (multiout) is unusable, or can it also be used normally? Or to be able to use it on CRT's is it mandatory to do it through the HDMI to Component converter?

@cactoidpinata Год назад

Great video! I wish I was that skilled with a soldering iron. I'm confused. Why is 720p integer scaling windowed? 240*3=720. It should fit the full 720p canvas. It looks more like 480p windowed in a 720p box. Am I missing something?

@vaguerant Год назад

I had the same reaction. There are some N64 games which ran natively at 480i, so I guess the scaling is based on that as a baseline? 1.5*480=720. So the 1.5x scale should in theory be a perfect 3x scale for games that ran at 240p, which is the vast majority of them, but non-integer for 480i games.

@cactoidpinata Год назад

@@vaguerant so, the few 480i games would fill the screen vertically? That’s interesting. I can’t remember if any games switch between 480i and 240p, but that sure would be jarring.

@vaguerant Год назад

@@cactoidpinata I think it's more like 240p games are already being upscaled to 480p at all times, so that it doesn't matter which resolution the game runs at. Then the scaling options are always working with a 480p picture, whether placing it in the middle of 720p or stretching it 1.5x to fill the screen.

@pokepress Год назад

@@cactoidpinata Resident Evil 2 and the Pokémon Stadium games are the big ones that switch resolution.

@SuperRobertson79 Год назад

It looks PIN 16 to me, not PIN 2 at the Pif chip.

@harryknapper1133 Год назад

Always love your vids keep doing the lords work brother

@MachoNachoProductions Год назад

Thanks Harry!

@balls2bone Год назад

I spotted a mistake in the installation part of the video from @7:59... You claimed you were connecting the controller wire to pin 2 of the PIF chip but you're actually connecting to pin 16. Pin 2 would have been diagonally opposite. Silk screen clearly shows pin 15 and pin 1 is marked with usual dot on chip.

@easymochi Год назад

I wonder what the background music is, I can swear I've heard it in VRChat as well...

@LazyBunnyKiera Год назад

Where's the installation guide for this for the different models? You said to solder to pin2 of the PIF chip, but you soldered to pin 16. So did you switch it to pin2 off camera, or was it actually supposed to be pin16?