The One Pro Integrated Handlebar 

@@diegogarzon7180 It’s an excellent handlebar. The quality is good for the price. It’s compatible with number of bike brands including Trek Emonda.

@@Gixer750pilot No. not directly. There is a metal piece that holds the screw. You’ll need to apply a carbon paste when installing it.

Yes. Been using it about 3000km. Never disappoints

@@JC_Cycling is it the same as Kocevlo integrated handle bar?

@@bayugagaming1098 it’s quite the same. The difference is the tightening bolts are on the sides but the one pro is in the back side. Same concept with pinarello seat post bolts. I wouldn’t recommend buying kocevlo as it is just another copy of most brands in the market. They even have copy of oakley glasses. 🖖🏻

Loving it. It is now a year since I’ve been using this handle bar. I had a few minor crushes and side falls with it. It’s working perfectly.

@@TBIKESandBlades Check this link. And have a look how other customers commented about this handlebar. You can buy it from this link. www.aliexpress.com/item/1005003968726979.html

You can use the original compression plug comes/fit with your bike. For the caps you need to check if which of the two caps can fit. If not you’ll need to have 3D printed. There are now compatible 3D printed bearing caps for, SL7, Cannondale, Merida, Factor and more for this handlebar in the market.

​@@JC_Cyclinghow to replace the 2 small hexagon bolts if already loose?

@@kerryhalley2891 You can first ask the shop/agent you bought the bar. If they can’t help, simply find a similar type of bolts online. Some bike brands uses similar locking system on their frame/seatpost clamp like pinarello. Just find the right size and length.

It should works fine but you can only route it externally.

Hey. They’re absolutely fine. As long as you have correct spacers for this bar. The bolts itself won’t be touching directly on steering tube, it only pushes the small part inside.

@@JC_Cycling thanks for the reply. Will it come with a top spacer that will work with my current spacers? That is my only concern!

@@Hokum48 It does comes with various spacers with different depths but unfortunately it can’t be mounted with different spacers. But you can always 3D printed specifically for the one handle bar and your bike.

@@JC_Cycling really appreciate all your advice. I really like the handlebar. So maybe I can use my existing Venge spacers and then 3D print a top spacer?

@@Hokum48 that’s possible. Just find the right fitting

Safe as is. Same concept with pinarello bikes seatpost locks

You need to find 3D printed spacers for systemsix as spacers comes with this handlebars are only flats. Systemsix kinda different.

@@JC_Cycling thanks for confirming. I see some separate listings to get the spacers.

@@VincentBrazil cheers. Good luck with your project

@@VincentBrazil hi did you buy the one handlebar and find the 3d printed spacer? I would like to put one on my 2020 Specialized Venge

@@Hokum48 I did, the spacer was an option on one of the AliExpress listings. Alternatively there's a company called The Sticky Bottle who make bespoke spacers. Perfectly happy with the bars.

3D printed spacers

Hey there. The One Pro can be use on teammachine. Also EXS AEROVER, new enve integrated handlebar, Deda alanera DCR.

You’ll have to purchase it separately

@@SabianDB02 nope. Unfortunately not.

Definitely. My first option was to get the EXS AEROVER but after carefully checking about it I’d say The One is way better. Cleaner and unique design.

Holding strong. Still loving it 😊

@@JC_Cycling appreciate the feedback!

One more question sir. Can you remove the white decals?

@@GOLTEB it cannot be removed. It’s under the clear coat. But you can sand it

It’s from Rollingstone 138mm but it’s too short for bigger bike computer. I’m using edge100 and it’s too short. So I refunded it got longer one. For edge820 and other smaller garmin or wahoo would fit.

I have G.530 and i buy 143mm

The One Pro does not include computer mount?

Sorry mate. I couldn’t make one

Yes. But you need 3D printed bearing cover and spacers. You can easily find it

@@franciscameros9590 yes

Hey. I’ve seen that bar in the market but it wasn’t my option. Nothing special with the paint job surface. Bulky top cap. Internal routing can be a pain.

I do have a lot as I only need 2 spacers. Other alternative is to 3D printed the spacers. You can search where you buy your bars. You can ask their service if they can provide extra spacers or if they can 3D printed it for you.

@@JC_Cycling The seller on AliExpress told me extra spacers are Out of stock. I don't know If you can Print them accurately. Hm could you maybe sell some spacers to me? I would Need 3x5mm and 1x10mm..of course I would pay Delivery Costs too

@@iwannabeyourdog90 Try this seller: US $4.80 20％ Off | 4Pcs Road Bike Bicycle Stem One Handlebar Spacer Set For 1-1/8(28.6mm) Fork Integrated Handlebar Headset Washer Accessories a.aliexpress.com/_mtmZyMc

@@iwannabeyourdog90 and this too: US $9.53 32％ Off | MIXED Pack Light Aero Aerodynamic Headset Spacer for 28.6mm and 31.8mm OD1 OD2 Steerer Road Bike Bicycle Parts a.aliexpress.com/_mtKxDNi

@@JC_Cycling thank you! Has it the Same Clip mechanism as the pro one spacers?

Yes

Yes. Definitely. There are varieties of spacers and caps for your frame.

@@FridaClaus www.aliexpress.com/item/1005003968726979.html

Yes

380/90mm- 377g

Heavy

That weight is exactly what my Ritchey WCS Logic II 38cm bars and WCS 220 6° 90mm stem combo weigh. Breaking even! 👍🏻

Hey. Yes, and there are other ways you can route the cables. Internally thru in front of the steering tube, one passing thru steering tube and externally down thru the bar.

@@JC_Cycling This handle bar does not have a hole that opens up between the steer tube and stem arm. It uses a different mechanism that works similarly, but just not what I'm look for since the cable is covered up rather than routed internally. I'm eyeing the Black Inc integrated bar which does have a hole opening through the steer tube which my BMC SLR01 supports.

@@davidramez6219 yes. It doesn’t have an opening directly route directly through the steering tube. But it works with some othe bike frames. Blackinc comes with that feature but it’s intended for Factor bike steering tube. You can try and confirm if you can use it and if it can fit with your bike. Try checking out fsa vision ACR handlebars.

@@JC_Cycling Thanks for the pointer. It's really hard finding integrated handlebars with a hole through the steer tube. Most reviews just don't show it and the manufacture's description and photos are not detailed enough. I think Black Inc does work on non-Factor bikes or I'm just too optimistic. Also, thanks for posting up the unboxing video.

5-6nm

For now you can only buy in Aliexpress. Perhaps they have in Amazon