The PROPER way to 3 Rotor swap an RX-7. Its not cheap or easy

Подписаться 1,2 млн

Просмотров 205 тыс.

50% 1

The first 100 people to use my promo code ROB40 will get 40% off their first order of Hungryroot bit.ly/439Nm6L!
T-Shirts: www.dahmracing.com/collection...
Patreon for Build Videos: bit.ly/2koiw8G
Instagram: bit.ly/RobDahmIG
Subscribe to Rob Dahm: bit.ly/1OAN9yi
AWD 4 Rotor Video Series: bit.ly/2QiFduE
Music:
------------------------------
A Vibe by tubebackr / tubebackr
Creative Commons - Attribution-NoDerivs 3.0 Unported - CC BY-ND 3.0
Free Download / Stream: bit.ly/3wtxWOi
Music promoted by Audio Library bit.ly/3uDgVAO
------------------------------
Pool by KV / kvmusicprod
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: audiolibrary.com.co/kv/pool
Music promoted by Audio Library
• Pool - KV (No Copyright Music)
------------------------------
Track: One on One - WOMA [Audio Library Release]
Music provided by Audio Library Plus
Watch: tinyurl.com/3xbzsjte
Free Download / Stream: alplus.io/one-one
------------------------------
Memory - Mehul Choudhary / mehulchoudhary
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: tinyurl.com/mrxan3we
Music promoted by Audio Library tinyurl.com/y6ehej3j
------------------------------

Авто/Мото

Опубликовано:

30 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 527

@RobDahm 2 месяца назад

The first 100 people to use my promo code ROB40 will get 40% off their first order of Hungryroot bit.ly/439Nm6L!

@andrewcastiglia9548 2 месяца назад

I used it! Thanks for the groceries rob

@eriklarson9137 2 месяца назад

The code should be "12 rotor only".

@rotorhead5826 2 месяца назад

Hey Rob, if your engine is centered it can affect handling and load transfer negatively under acceleration/deceleration. Ask guys who ride BMW motorcycles that have flat twin engines.

@akidafloof 2 месяца назад

Rob, your car has 4 safety recalls, I don't think your warranty is gonna cover this

@bhx7527 2 месяца назад

would it be simpler to move the motor/trans farther right to clear your leg, like the old preludes? I know you've probably done more work by now, and this would require custom halfshafts but something I thought of.

@joealex65 2 месяца назад

"Move it 8 inches deeper". Rob Dahm - 2024. 😂😂😂

@drewwrobel564 2 месяца назад

"8 is too much, you'd like 4 better." . Me- To every girl ever

@Rose.Of.Hizaki 2 месяца назад

_"its not going anywhere"_ - Rob Dahm. 1938

@weedfreer 2 месяца назад

"The worst thing I could imagine is having that input shaft off" - Rob Dahm - 2024

@CozzyKnowsBest 2 месяца назад

It's this kind of impossible request that puts us off trying.

@1997HTAA 2 месяца назад

“Things a girl said you can’t forget” for a 100 please

@eliminster06 2 месяца назад

so a while back I had the opportunity to talk to both Fred Veitch and David Donohue about what they preferred for going up pikes peak and they both said it takes a softer suspension than you would think. So while I think you are going about the right adjustments to the body I wouldn't focus on lowering the car as much as you think and would instead focus on allowing the tire to move more so the ripples in the pavement wont disrupt the cars balance.

@wobblysauce 2 месяца назад

Indeed, more travel gives you adjustment room. People go to low and hard often.

@makhoe1 2 месяца назад

Bumping this comment up.

@eriklarson9137 2 месяца назад

I like all your related videos on your channel. It shows you really have experience in this field. and that people should consider your opinion important.

@michaelh.1262 2 месяца назад

@weedfreer 2 месяца назад

Higher up with dropped skirts for ground effect goodness and supple suspension. 🤘🤘👍 Either that or some FAT side walled tyres.

@bikergobrrr 2 месяца назад

I love how all over the place you are Rob. The one time you do a proper outro on a video with a sneak peak of the next video. The next video is something completely different.

@calebb5106 2 месяца назад

i was really expecting the last 1 or 2 words to be cut off and get blue balled like he usually does

@DaVe-iSnOtHoMe.MaN.LemmingsWeB 2 месяца назад

Just think how many thousands of Hours are cut an hidden away forever

@eriklarson9137 2 месяца назад

It's all about the 12 rotor!

@andrewcastiglia9548 2 месяца назад

Isaiah has become quite the master welder throughout the videos. Love to see the progressions

@boringbrodi1772 2 месяца назад

SAFTEY SQUINTS LMAO

@andrewcastiglia9548 2 месяца назад

@@boringbrodi1772 exactly why I made this comment. No bother turning the head or asking her to cough 😵. Also tig throws almost no slag so there's that too

@jamesdoranto9013 2 месяца назад

You can take the Rob Dahm channel outa Isaiah, but you can't take Isaiah outa the Rob Dahm channel.

@SpartanGuy 2 месяца назад

I'm a simple person. I see Rob Dahm notification, I click.

@Berm_Blaster 2 месяца назад

People are still saying this? Wow

@nycsox987 2 месяца назад

Lame comment..

@markminheere3592 2 месяца назад

Yes

@commonsense7754 2 месяца назад

Proven by the fact you still use this lame old comment

@Crazy_Adventures 2 месяца назад

@@nycsox987your comment has a “translate to English” option 😂

@Keasbeysknight 2 месяца назад

3d printed is a great addition to the CNC mill, they really go hand in hand.

@JamesTK 2 месяца назад

great for quick prototyping billet parts indeed!

@zac2384 2 месяца назад

My printer makes me want a little mill CNC or not

@wrexz 2 месяца назад

Plasma cnc would be nice too

@Berm_Blaster 2 месяца назад

When my boss asks why im late I'm going to tell him rob dahm uploaded late and cant miss any of his videos.

@chrisbair1642 2 месяца назад

It's all good extending my lunch break for it.

@FloorItDuh 2 месяца назад

I need both of you to see me in my office when I'm done watching this video.

@chrisbair1642 2 месяца назад

Omw boss

@jok3yjesu339 2 месяца назад

I'm just saying I would recommend looking into a sfi rated bell housing or at least a blanket to go around that. I love it man but as I get older safety really matters

@justjonazjameson5559 2 месяца назад

I expected that you had to have one to race at Pikes Peak

@larryboy8821 2 месяца назад

@@justjonazjameson5559yeah, I'm curious about that as well.

@oikkuoek 2 месяца назад

When doing wheel wells: On a stationary driving wheel 1 1/8" side clearance and 2,5" radial clearance. On turning non-driving wheel, 1 5/8" side clearance and 1,5" radial clearance. On turning driving wheel, 2 1/4" side clearance and 2,5" radial clearance. Minimum. Measured from bump stops, lowest points and turning locks. Anything smaller will start to accumulate dirt, rubber, grime, rocks etc, "But Pike's Peak is on asphalt!" It is also a normal public road, with a periodical winter. There's all that and then some on that road. Also your tire is all over the place when you are pushing the rig. Even your tightest radial street tire with the "rim cover" profile will expand and move sideways when pushed. It needs room to live, otherwise it doesn't. Also, you don't want to get steered by your tire rubbing, while navigating through a narrow hillside trail.

@_Mav 2 месяца назад

Pro-tip, when using an angle grinder use it to score along the metal until it goes through, instead of using it like a reciprocating saw. The blades last 50times longer. Can confirm, I work in car restoration.

@aidansoliday7913 2 месяца назад

Isaiah is an absolute legend and the luscious locks only make it better; keep ‘em growin

@Jzatloukal 2 месяца назад

From my personal experiences I've always put power steering coolers in the return line from the rack to the reservoir since that line is much much lower pressure than the feed line. This allows for a greater selection of coolers and less risk of failure by having less connections in a high pressure line. Additionally cooling the fluid before it returns to the reservoir helps limit heat in the system.

@blakefeurer2519 2 месяца назад

Always gotta watch the new Rob Dahm vid

@Kneedeepingore 2 месяца назад

For future thick aluminiumwelding, always chamfer buttjoints (on the alternatorbracket). That joint most likely barely penetrated 1mm down.

@TheMightyMelmin 2 месяца назад

Isaiah saying “married to the game” could totally go on a shirt above a shot of the car mid build

@hyper8545 2 месяца назад

Someday rob will do a single rotor motorcycle or something I can feel it

@patrickm4566 2 месяца назад

I’m not really a bike enthusiast, but I’d love to see a rotorcycle. Rob would be the ideal guy to do it.

@-Window-Licker- 2 месяца назад

35:22 4k slow motion safety squints

@CorpseExplosion 2 месяца назад

LOL at Joel's intrusive thoughts at 4:28. He says it with such evil gusto.

@CoopaCoop 2 месяца назад

1am video drop? Yes please!

@thepcguy007 2 месяца назад

Your enthusiasm is contagious, Your fabricators are fantastic. I can't wait to see that car on a track.

@DailyElectrician 2 месяца назад

video and build are simply top notch. keep up the amazing work all around

@robertutley9768 2 месяца назад

rob, i just wanted to say, i absolutely love your videos. theyre so damn informational. and for someone like me, trying to get into the car building industry, your videos are an absolute godsend. you actually show us what you do and explain why you do it. i love it. keep up the awesome work man.

@DVNKMVR 2 месяца назад

I have never looked forward to anything more than I look forward to seeing your videos. Not even a major blockbuster movie in theaters gets me as excited as I get when I get a new dahm video. ❤ much love to the whole crew.

@deltacharlieecho4732 2 месяца назад

My dream is to build a z3 time attack car with an m70b50 built with forged internals, dry sump, and twin compound turbo setups. You’re an absolute inspiration, Rob. I’m starting my own business this year so that I can make enough to get the space needed to start working on all of my projects and testing. I have more respect for you and your team than you will ever know.

@michaelh.1262 2 месяца назад

Z3s are badass. Goodluck sir

@LtdJorge 2 месяца назад

Damn, that’s a cool engine. Do you have estimates on the power it could produce modified like you said? I’m guessing probably too much for the German Miata to handle perfectly 😂

@deltacharlieecho4732 2 месяца назад

@@LtdJorge as far as I’m aware nobody has done it before. There are people that have built the m50 to over 1000hp so I’d say that 1200hp would be a reasonable starting point.

@adiaz2938 2 месяца назад

Literally the only channel I don’t skip through 🔥🔥🔥

@gusrodriguez85 2 месяца назад

The amount of work you guys were able to do in just 30 minutes was insane.Great job!

@pomi1735 2 месяца назад

rob you are such a intriguing man ive been so fascinated by everything you have been doing and accomplishing this really is amazing and extraordinary what you are doing and teaching all of us. you keep up the good work man! much love for your incredible work!

@crystalzues4712 2 месяца назад

Always love watching the fab work on these.

@paulhowlett6619 2 месяца назад

Rob. I suggest you partnering with someone to release this subframe to the public. Even though yes it’s very specific to your needs. It would make 3 rotor swaps better than most methods by literally making it essentially a corvette. Hopefully after pikes the data and revisions will make it better

@David_Conant 2 месяца назад

You’d need to remove a lot of the floor to accommodate it.

@ax75f92 2 месяца назад

Love everything about this. Prob never see this comment, but you might find some inspiration from some of the Japanese time attack FDs for your rear diffuser. Specifically the cutting of the rear bumper up to the license plate to allow for more angle.

@rohanberry6015 2 месяца назад

Rob, yr channel is the most innovative, knowledgeable an just awesome automotive creator about now, yr always about sharing an learning together an mate I not only love to see it but I truly appreciate all of it so I sincerely Thank you all. Steve Morris could learn alot from you!!! 🤙👍

@jredmartinz 2 месяца назад

This is late, but damn... I'm so fucking proud of you guys. You're light-years away from where you started. Keep it up always rooting for you

@Bob0sModelFabWorx 2 месяца назад

I like to watch a lot of builders and see how each has their own style of building and modifying. One thing I like about your videos is how you explain WHY you made each modification. Sown to how it makes the car react. That is a major "awesome sauce" in my book. Thanks.

@DiLLY_V92 2 месяца назад

I love your content man. And I think you chose a great fabricator assistant. Please keep it up! I love watching someone make my dreams come true! Serious inspiration

@derpbrozstudios 2 месяца назад

Yo. All the work being done on the 3 rotor is literally beautiful. Like it looks so so amazing, I wanna get to this point to where I can make something of this quality in the future.

@MarkBlance 2 месяца назад

Very cool to watch the process of Rob learning the tech (steering wheel sensor) and explaining it to us. Thanks for that.

@Travelcooler 2 месяца назад

Just recently bought my first rx7 because of you haha. I will say, you got to change that coolant! I can smell it from here

@frankgeimer5952 2 месяца назад

Great video Rob! I love your enthusiasm and drive to perfection!

@r.c.reasor4807 2 месяца назад

I don't know the guy but he comes off like the nicest person in his videos and I enjoy that almost as much as his content, which is always first rate. Keep up the great work sir!

@fosterengelman7656 2 месяца назад

I remember a time, watching this channel, when Rob had a hard time getting things machined for his car. Its so cool to see you do everything in house!

@josephbusby4625 2 месяца назад

I always knew Rob was a playa playa!

@ProjectMaxima35 2 месяца назад

love all the content being patient keep it up dahm❤️

@limesta 2 месяца назад

I always love a new dahm vid

@simonname7530 2 месяца назад

Can see how Mazda replicated the layout with the RX8 engine being further back compared with the RX7 and having the radiator angled.

@FoundingStockNZ 2 месяца назад

Great work Rob, you've come a long way.

@buriedintime 2 месяца назад

Awesome to see this come together. Nice work.

@1bugati16 2 месяца назад

Absolutely love these videos of doing things most people wouldn’t even consider

@Tunerguy21 2 месяца назад

Any day (or night) with a 3 rotor vid is a good one in my book. Its admittedly a bit painful to watch whenever you have to cut some of the original car away, but seeing you guys build it back up and build it better makes it all worth it. I can't wait to see it finished and out ripping again.

@shaidensmillie2218 2 месяца назад

Absolutely love this build, super exciting to watch. You bois are gonna set some personal bests at pikes peak!!

@kshysztof9649 2 месяца назад

very good music choice in this video. Made it nice and dynamic. Thanks as always!

@alex4alexn 2 месяца назад

love the long build vids!

@clausnepperchristiansen7394 2 месяца назад

Love these fabrication videos. Even though i have been working on cars, and done a bit of racing, i can still learn a lot from watching your builds. Love it.

@jes2731 2 месяца назад

With all those separate lines all needing to compete for the same space around and through the serpentine belt in that one area. You have a CNC machine. Design a passage block that fits in the space provided, so that all lines in front of the S-belt can plug into, and then all the needed exit ports to the rear, top or sides can redirect to. The block would have all the needed passages drilled through with the appropriate AN fittings at both ends of the connecting passageways. Then it could even be incorporated into the bracket all the accessories are connected to.

@andrewjohnson9896 2 месяца назад

Another wonderful video guys.

@MHSDankusPotatus 2 месяца назад

Isaiah might just have the sexiest welds on RU-vid. The craftsmanship from everyone on the team is mind-blowing

@HELLOXD7 2 месяца назад

Honey, wake up! A new Rob Dahm video dropped!

@octo9i 2 месяца назад

I've been following since the RD build rx7 v1. team is getting back stronger and cleaner on this v2 build. can't wait to see it running ! - ❤ from malaysia 🇲🇾

@hawaiinsurferx 2 месяца назад

So weird you made this vid, was watching your 5 year old video of 2 rotor vs 3 rotor and went to your channel to see what was new and this was exactly what I was looking for. Can't wait to get my first Rx-7 and been looking at the 3 rotor swaps. Idk what to do yet, she's going to be my track car.

@user-pw3ct4zu7q 2 месяца назад

Totally awesome!!! Some of the best RU-vid footage Iv seen! 👍

@silenterection 2 месяца назад

Mans sad 😢. Man sees Rob Dahm Rx-7. Mans Happy 😊

@JWbrasser 2 месяца назад

Isaiah just out there claiming he isn't married to rob... YOU CAN BE HONEST TO YOURSELF GUYS ITS FINE WE LOVE YOU!!!

@echo5827 2 месяца назад

Nice I was looking for a not cheap and easy mid engine 3 rotor Rx7 guide

@bsmbB 2 месяца назад

Isaiah looking like the Mexican Danny Mcbride

@br_gladiators 2 месяца назад

Any day is a good day when rob dahm uploads. ❤

@jamaal184 2 месяца назад

Love the background music you’ve chosen. 👌🏾👌🏾👌🏾👌🏾

@SlowSTEN 2 месяца назад

I already see how the aerodynamica of the front of the car are going to look because of the angle of the radiator and im stoked!

@REAPERofCali 2 месяца назад

Excellent editing!

@jacquesb5248 2 месяца назад

that thing is going to be badass when finished! looking forward to it!

@user-gp8ox8fx5s 2 месяца назад

You should design and make a pair of REALLY strong upper control arms for the Cyber Truck and ship them to Cody... I have a feeling he's going to need some.

@jasonsapp792 2 месяца назад

Wow that motor and transmission looks BEASTLY!!

@Grooty79 2 месяца назад

Hey Rob a steel scatter shield style bell housing would be safer for you to use, and you have everything there to make it OR put the mill to use and CNC a billet alloy one 😊

@Grooty79 2 месяца назад

Even copy the bell housing into computer so you can make them to sell to others wanting to do the same

@christophweiss5216 2 месяца назад

thats so amazing thank you Rob. Best regards from Germany

@lukasjavorka5924 2 месяца назад

Your guy is bloody good in metal /welding fabrication 😮

@Budgy.Derpy12 2 месяца назад

Love when rob goes deep.. with the rotary placement 😂🤣

@Stepica 2 месяца назад

I like the Haas emblem on your CNC machine

@VieauAuto 2 месяца назад

grand rapids is a huge fan of your content!!

@TJdroidkiller 2 месяца назад

A 1 AM Rob upload! Good thing it was class registration tonight

@gamegoodman9064 2 месяца назад

Thank you for continuously uploading videos. (Fc from thailand)❤

@vividuniverse3800 2 месяца назад

Dorito daddy Dahm has blessed us with another great video

@southney7211 2 месяца назад

Some great work there

@peterbonnez 2 месяца назад

Excellent work...

@ryanbrown5727 2 месяца назад

Thank you for more uploads though! ❤

@stevebeavers3754 2 месяца назад

Nice concept. Isiah has the 80s hair on point 😂

@Tahu2323 2 месяца назад

Waking up to a Dahm video is exactly what I was dreaming about last night

@Mianhe 2 месяца назад

Isaiah is the man i aspire to be

@FabricationFather 2 месяца назад

Me too brother

@wistexvlogs8327 2 месяца назад

It feels illegal to be this early to a Rob Dahm video...

@RobDahm 2 месяца назад

Haha we just got to Seattle and finally got enough signal to upload before heading to Rally school tomorrow!!

@clannishkobra8965 2 месяца назад

*it's 3am mindlessly scrolling through social media, gets notification for new Rob Dahm video, ahh serotonin "click"*

@Mr.Unacceptable 2 месяца назад

Makes me wish I was 30 years younger. Loving this series. I'm addicted.

@boostbogan 2 месяца назад

Incredible engineering mixed with "all 3 of us could sit on the stool" Thats why this channel rules.

@austinrode3974 2 месяца назад

I move the engine back on my C10 about 10 inches and so the crank sits behind the front cross member. It's made all the difference in how I'm able to compete against lighter more powerful trucks

@DavisJDaniel 14 дней назад

Hey Rob hope you see this i was talking to my dad about your competitiveness withe the mileage stats your insight gives you and he suggested taking off the passenger mirror like one of the old metro xfi (legally you only need 2 mirror is cali) also idk if you even have the insight anymore, im not the most loyal fan but just a lil idea. thank you for the content brother your a crazy man. keep at it.

@alexraper3921 2 месяца назад

Two DAHM vids omg!!!!

@charles1990s 2 месяца назад

Man I love rob goes from a hundred thousand dollar mill to a sawzall😂😂

@nicolashoyt5341 2 месяца назад

I've been building lots of car parts on my 3d printer using nylon and polycarbonate. I'm experimenting with parts that hold boost lately. So far small stuff like a throttle body adapter for my friends Turbo Harley, thinking of doing a custom intake plenum on my Honda Magna for a turbo build too. Printed a 3 gauge holder my my Turbo E36 that replaces the factory radio. I design all my parts and love seeing them come to life. I wish I could just jump on a sick CNC machine like yours but not an option for me lol