The Raspberry Pi Pico WAS Overrated! But that changed!

Подписаться 2 млн

Просмотров 590 тыс.

50% 1

Free Altium Designer Trial: altium.com/yt/greatscott!
OctoPart: octopart.com/
Previous video: • Mechanical Switches a...
Arduino Alternative video series: • Arduino Alternatives
Facebook: / greatscottlab
Twitter: / greatscottlab
Instagram: / great.scott.lab
Support me for more videos: www.patreon.com/GreatScott?ty=h
You can get the Raspberry Pi Pico (W) here: (affiliate links)
Amazon.com: amzn.to/3P5HuTI
Amazon.de: amzn.to/3bS9Pib
In this video we will be having a closer look at the first microcontroller board from Raspberry Pi, the Raspberry Pi Pico. The board is 1.5 years old but back then I was convinced that it was overrated. But things changed and nowadays I think it is a good Arduino alternative. So let me show you how to use the board and what exactly happened that made me change my mind. Let's get started!
Websites which were shown/used in the video:
datasheets.raspberrypi.com/pi...
datasheets.raspberrypi.com/rp...
datasheets.raspberrypi.com/pi...
www.raspberrypi.com/documenta...
www.raspberrypi.com/documenta...
www.raspberrypi.com/documenta...
github.com/earlephilhower/ard...
arduino-pico.readthedocs.io/e...
github.com/khoih-prog/RPI_PIC...
www.arduinolibraries.info/arc...
www.instructables.com/Raspber...
www.instructables.com/Arbitra...
www.breatharian.eu/hw/picovga/...
forum.arduino.cc/t/libraries-...
Thanks to Altium for sponsoring this video.
0:00 Why I think the Pico was Overrated!
1:24 Intro
2:00 General Overview of the Pico
3:43 Good Parts of the Pico
6:55 One Bad Thing about the Pico
8:01 Truly Great Stuff about the Pico
9:35 Verdict

Наука

Опубликовано:

11 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 861

@ste76539 Год назад

"Back then" you completely missed the point of the Pico. It's a decently powerful board, not particularly special, BUT the price is the point. £3.00 for a powerful, easy to use microcontroller is big. Also, you were never limited to Micropython - there was a C/C++ sdk from day one. It completely blows the commonly used Arduino (Nano and Uno) out of the water. Andit only got better with Arduino IDE compatibility when that became available (something not available at first, but we knew it was coming from day one)

@Henry-sv3wv Год назад

plus there are two arduino support libs, official uses mbed os, inofficial based on pi c/c++ sdk (earlephilhower/arduino-pico), so depending what libs you want to prog against you have two choices

@BH4x0r Год назад

i love the low price, but if i really need anything more powerful than a Nano i use a Teensy, the Teensy 4.1's power and speed just can't be beaten in the Arduino/MCU world, albeit it costs 8x more in my country

@uis246 Год назад

RP2040 price around 1$ or 0.8$ if in 250 pcs reel. Pretty cheap actually.

@misham6547 Год назад

Yeah if anything it's the actual Arduino and clones which are overrated, with pico pi which is easier and esp32 which is more power both way cheaper than most of the clones

@BH4x0r Год назад

@@misham6547 i'd say the other way around, i don't like Python and only really know C++ so it needs to be accessible through C++ for me, to me it doesn't matter wether that is in Arduino or a similar IDE, but in price/perf it shits on all Arduino and ESP32 variants, other than that Pi Pico with C++/Arduino code or Platformio is now the best option, unless you need power then it's the Teensy 4.1

@TimSavage-drummer Год назад

With the help of a second pico (with picoprobe installed) you can also add breakpoints and step through your running code. A big help for debugging more complex code.

@greatscottlab Год назад

Thanks for the tip :-)

@jonnypista52 Год назад

I should had done that instead using a million print and sleeps so I have time to read the prints and follow the code.

@jonnypista52 Год назад

@@marc-andreservant201 I don't have a Raspberry computer and being in stock was not a problem, but I'm not paying over 100 euro for a Zero (at least it was that price when I needed it), the 4 started near 200 euro

@dozog Год назад

THAT... I would love to know more about. Debugging is by far the most time consuming problem on any of my code.

@dozog Год назад

@@TimSavage-drummer saw your unedited comment yesterday.. thanks for editing it. I m going to have a look.

@adamsfusion Год назад

I wouldn't sleep on the RP2040 C/C++ library and included CMake plugins. It's seriously well made and the documentation is a good read. Beyond that, I've yet to see anything in the affordable range that comes close to matching the power of the PIOs. I've been able to take complex timing interfaces I've done in the past on Blue Pills and convert them into PIO only programs. Those 9 instructions are insanely expressive and make it possible to implement something like QSPI in just a handful of operations. The RP2040 is my favorite microcontroller to come out of this decade and it's going to be a tough match to beat.

@LittleRainGames Год назад

I agree. The price and PIO are a game changer.

@LittleRainGames Год назад

With Visual GDB it makes it so easy to use as well.

@Alacritous Год назад

@@LittleRainGames I remember when it came out, people were saying it has no power and it's pretty useless. They didn't know.

@alexforget Год назад

Do you think it would be possible to make quadrature encoder interface with PIO?

@Henry-sv3wv Год назад

there is an inofficial arduino version based on the c/c++ pi sdk

@fmdj Год назад

For development it's also worth considering platform IO with vs code to program it in C++ directly and get something less hackish than the Arduino compatibility layer.

@vaughnvarma8447 Год назад

One important thing to know when using the Arduino IDE with the Pico, is that, to my knowledge, it *doesn't* leverage the RP2040's fast floating point library (at least it didn't when I started playing around with it earlier this year). This is fine for many applications, and it's still way faster than a typical arduino, but switching to the C SDK does make those operations much, much faster. I tested this by running the same code, with a ton of floating point operations, compiled and uploaded via Arduino IDE, and via cmake/manual copy/paste, and IIRC it increased the cycles per second (running my entire program, not CPU cycles or FLOPS or anything) from something like 20-80k to 300k. Not a very comprehensive test, but it noticeably smoothed out the stepper motor movement I also had running in that loop, and made the Pico exceptional for my application, rather than acceptable.

@Samuel-eu1ts Год назад

Honestly compared to other vendors, the rp2040/pico C++ sdk is awesome, the documentation amazing and really easy to understand, I would say it's no less complicated than seting up platformio And the fact that the rp2040 is in stock is a major advantage

@darkfire2703 Год назад

Documentation is really good on the rp2040. Especially compare to the horrible docs that almost all other manufacturers provide

@NinjaSpotted Год назад

I agree the Pico C/C++ SDK is amazing and easy to use

@talk2azs Год назад

Yes the c++ SDK is great, and by far so much faster. Setting up the c++ user studio is not recommended for newbies though. All I know is that I will NEVER go back to Micropython. Lol

@StephenHoldaway Год назад

Yes! Came here to say this too. It's a very clear, clean API, and doesn't rely on cumbersome vendor tools. Compared to the STM32 HAL it's an absolute dream to work with.

@savejeff15 Год назад

Yeah but cmake. The SDK is good but platformjo with Arduino-pico core is in my opinion the best solution

@veisystems267 Год назад

LOL @ 9:38 "... I think that the Pico truly became a good alternative over time...". Up to that point in the video, the Pico didn't change, but rather your knowledge and opinion if it changed. ;)

@lovemadeinjapan 3 месяца назад

Software changed a lot though. First months programming the Pico was horrible and let to killing a few with a hammer. Poor Picos.

@fordrollhaus9086 Год назад

I mean I think one of the main advantages is the price. Getting a powerful, multi core microcontroller for $4, or $6 with wifi, is insane.

@seanocansey2956 Год назад

And also the fact it's actually procurable during the silicon -shortage- apocalypse

@kosmasraptis8374 9 месяцев назад

The wireless chip also supports Bluetooth, and with the new Pico SDK it's actually enabled in the drivers, so you also have Bluetooth LE now.

@Oinikis Год назад

The first advantage I see with this over arduino is for various DIY flight controllers due to greater speed. I made a gyro stabilized active control for a rocket, and it had operating frequency of over 200Hz, with greater speed and memory, better flight control and less gyro drift should be achieved.

@deadboy9955 Год назад

I was thinking about the flight controller benefits as well, because pico has 12 bit resolution. But seeing how noise can be an issue, I think it may cause some problems with accuracy.

@acestudioscouk-Ace-G0ACE Год назад

I always learn something when I come to your channel, thanks!

@petrkucera3514 Год назад

If you want to measure ripple or transient, noise and amplitude when signal shape accuracy is important, you have to use spring on ground ring to make ground loop so small as possible. In 7:14 is typical example, how to not measure noise and ripple on SMPS supplies. When i did this last time, i catch 10× more higher values than reality was. Yeah, im sure that some noise will pass thru that tiny SMPS supply on board, but, are you sure, that this noise doesnt come from USB?

@amansaxena5898 Год назад

The only disadvantage for me, with RP2040/Pico is the lack of an Ultra Low Power Domain, which results in a very lacking sleep functionality, and thus is unusable for battery powered projects, like sensor nodes

@MariusHeier1 Год назад

The most impressive things with the Pico was that it existed. For the past years the other products have not existed. And that Pi foundation still did not charge a premium for it because the other companies messed up their manufacturing.

@ChaonicMew 6 месяцев назад

Hah, didn't think I'd see you here in the wild! :D

@MariusHeier1 6 месяцев назад

@@ChaonicMew Sometimes I just cant shut up. Haha .. or .. yeah... You get it

@ilyam.1872 Год назад

As always, thank you very much for writing and cleaning subtitles.

@henryshirlyshibindcruz6830 Год назад

Thank you so much for sharing... I too was having the same noise problem but didn't know what to do.. I was using pico as a HID device for a joystick project...

@KarlMiller Год назад

Excellent job! Even I followed, so you did a great job of breaking down the Pico using the other MCUs as the comparison. That is a great strategy for sharing the relative benefits/drawback for new tech because it draws on something that many of us are already familiar. I'd be curious to know if the wifi Pico has the same power conditioning issue feeding the ADC (great job explaining that issue). I found myself thinking that almost every sentence you uttered would represent about a day worth of my time googling or reading to come to the same conclusion as you.

@electronics.unmessed Год назад

Many thanks for the comprehensive review and comparison. Really a valuable when tinkering with this kind of boards.

@abhijeet_ghosh 4 месяца назад

Thank you so much for putting in the GPIO 23 command for this! I could not for the life of me figure out why the pi pico’s ADC was so bad, and after I ran this command the ADC is as accurate as I need!

@WistrelChianti Год назад

Wow the dual core code looks so much simpler than earlier stuff I looked at! Thanks for the update. Still not used mine yet but have an idea in mind driven by the available storage

@avejst Год назад

Great video as always 👍 Thanks for sharing your expirences with All of us 👍😃

@vincentocampo5901 Год назад

Always a good great Explanation 👌

@jasper265 Год назад

I'm a little confused why you chose to compare the Raspberry Pi Pico to an arduino. It's been a while since I last did microcontroller things, but I was under the impression that the ESP family was the mark to beat, not the arduino family...

@ktteol Год назад

Agreed... the Great Scott missed the beat on this comparison... Comparing a board introduced in 2008 with the "late in the game" Raspberry Pi Pico doesn't make any sense... The ESP32-PICO-D4 introduced in 2014 still puts this Raspberry Pi Pico to shame today! This is just the Raspberry Pi Foundation trying to enter the MCU game (late) and capitalize on their SBC reputation.

@gaborm4767 Год назад

What do you think about RP2040 vs ESP32? As I see RP2040 with WiFi like Nano RP2040 Connect is 6x times more expensive than ESP32.

@deltaray3 Год назад

Great to see your new intro and hear you do the old outro "and I'll see you NEXT TIME". Haven't heard that one in a while.

@garri_gueta Месяц назад

I have to say that the neame of this channel fits very well with the content, you are really great !!!

@davidpetry7853 Год назад

You can also program it in C / C++. The documentation is really good

@andrewlankford9634 Год назад

Prefer it, but why don't they explain the command line commands used to compile and link up an executable image rather than relying on the cmake garbage?

@keiyakins Год назад

@@andrewlankford9634 because C is a terrible language with terrible compilers that need to be coddled just so to work right, and humans basically can't use them directly.

@amydamon2323 Год назад

Thanks for this update. I wouldn't touch it when Python was the only option, but after watching your video I''ll have to try one out now.

@bheeshmavasuprasad Год назад

Thank you, I've wanted to buy one but wasn't sure if it was powerful enough and yes, micropython. I'm definitely reconsidering

@greatscottlab Год назад

Glad I could help!

@zeberto1986 Год назад

To be fair the pico / rp2040 is firmware agnostic meaning you dont have to stick with micopython. Arduino support has been official for a while now and there is a lot of documentation for c/c++ and circuitpython too. Its worth reconsidering.

@David-fh6rr Год назад

There's also a Rust HAL for the rp2040!

@ffff-gx7tn Год назад

As someone with very little programming knowledge, I was put off using it as I was more familiar with Arduino, but even I was able to make a simple PIO assembly program to blink the LED in a few minutes with micropython. The advantage of micropython (or circuitpython) is that they create a filesystem, so you can have multiple programs on the Pico (the one named main.py or boot.py starts on reset) which is great for breadboard prototyping, you don't need to reflash every time and you store the libraries you need on the Pico as well.

@MorRobots Год назад

Check out the Teensy boards. I can't praise these things enough for how good they are while still being a micro. I have absolutely no affiliation with PJRC.

@my3dprintedlife Год назад

This is all good news! I'm still a novice with my Arduino so I'm happy to hear the pico can be programmed similarly to the Arduino. Thank you!

@empty9360 Год назад

I had tow laying around for more than a year but I used them both in the last two days and now I am in love with a new Microcontroller :D

@Thats_Mr_Random_Person_to_you Год назад

I do genuinely believe the PIO's are THE single biggest benefit to a pico that really does put it into a different class and can really really add additional features that blow the arduino/esp boards out the water. Your VGA example I think proves that.... but kinda as you point out, PIO is a very advanced feature that the average hobbyist is unlikely to fully benefit from. But given how commercial customers can now buy RP2040 chips standalone to integrate into things I think it bodes well for the 2040 ecosystem as a whole.

@xenoxaos1 Год назад

The Beaglebone had something similar to the PIO on a SBC way back in the day.

@user-fm7uq4fb3f Год назад

PIO also allows easy and cheap access to communications that previously required someone to know how to use an FPGA It's incredibly useful for hacking and modding of things 😋

@Thats_Mr_Random_Person_to_you Год назад

@@xenoxaos1 its definitely not a 'new' thing for sure, more that for the price point of the RP2040 its really targeting other microcontrollers and SBC's are a different market segment etc.. Its nothing new, more just new in the 'lower performance' end of the microcontroller market (lower performance is a relative term you know what I mean, I know its a very powerful chip, but we have to grade things somehow!) Meaning compared to its direct competition PIO is the most impactful and can mean, depending on sustem requirements, it wipes the floor in terms of which people would choose.

@blacklion79 Год назад

A friend of mine tried to buy several hundreds of RP2040 as commercial customer - no luck. Waiting time is indefinite.

@djmips Год назад

" PIO is a very advanced feature that the average hobbyist is unlikely to fully benefit from." - why No! First of all you underestimate the average hobbyist and second of all, as more people who do want to design PIO routines they will share them with everyone else. This is not unlike how the average hobbyist makes their own keyboard controller with Arduino - someone already does the heavy lifting and they just have to tweak and craft the connections etc.

@bakupcpu Год назад

Very nice little board indeed! Thanks for sharing it with us. Cheers!

@lemon6521 Год назад

I take psychic damage every time he refers to normal microcontrollers as "arduino alternatives"

@TheSomar1991 Год назад

very helpful thank you

@Davedarko Год назад

So the fuzz about the ADC is _not_ coming from the power conversion. I read that thread where somebody did a histogram of measured values and had some spikes for certain ADC values (see Errata 11 in the datasheet for the values). Those were the result of the wrong size of the internal capacitors used in their comparators.

@caseysheridan6752 Год назад

Any chance you have a link to that thread? I’d love to read about it

@JamesHughes65 Год назад

@@caseysheridan6752 Late reply, but this is covered in the RP2040 datasheet.

@obwanda9113 Год назад

I like your videos, very detailed. I just saw your video about a DIY Oscilloscope. I also saw a simple plug-and-play Oscilloscope project with the Pico using a Smartphone as a display elsewhere. I wonder if it's possible to have the cheap Oscilloscope DIY revisited using Raspberry PI Pico but with the capability of measuring High Voltages with the ZMPT101B voltage sensor module and the SCT013 current sensor clamps for High Current. It should be interesting.

@r1273m Год назад

Great video. When it was first released I was very underwhelmed due to the lack of WiFi. I decided to stay with my WEMOS devices. Now I may have to take a look at the Pico.

@greatscottlab Год назад

Yep. Really looking forward that WiFi gets integrated in the Arduino IDE and then everything is possible :-)

@siddiqjr4660 Год назад

thank you for explaining it . now its approachable if we can programme it with Arduino IDE

@SGRAHMD Год назад

Thanks for making amazing videos for us. 🇧🇩

@Gamezone-sd3er Год назад

Wow something that I wanted for my projects 😁 and I think sir you should build an oscilloscope with this for us as a project kit it would be very helpful for learning more complicated projects 😁. As always thank u 🙂 for such a detail video

@rubenjuanjuan7494 Год назад

Did you do nay evaluation to the Pico plus WiFi board? Looking forward to it.

@EnvAdam Год назад

I have to thank raspberry pi foundation for providing such useful resources around the RP2040 allowing me to make a clone of the pico with some nice to have changes like a linear regulator so there is no switching noise, top side GPIO labels and a reset button.

@fatiheneskuru4332 6 месяцев назад

I was thinking about the use of ferrite bead noise filter design to diminsh the noise on analog inputs. With the implication of this you might no longer need to de-activate the PFM mode, therefore improve the efficiency. 7:38

@Mr8411s Год назад

Actually, there is one additional disadvantage to the Pico compared to the Arduinos and ESPs: it has no integrated EEPROM for storage of settings and such, however, you can add an I²C module for that, so this isn't really a deal-breaker.

@crispoman Год назад

I'd suggest taking a look at Files→Examples→LittleFS→FSUpload, which also contains instructions for how to set up a small filesystem in the flash (along with your code) to store settings, etc.

@Random_one_here Год назад

I use the rp-hal rust library for all my Pico projects. The only downside is that I have to unplug and plugin again each time I want to update the code. So I've a tendancy to create the code in micropython as testing is much faster then when I have a solid foundation I'll translate to rust and then compile. It can be a hassle but for battery powered projects rust helps with bat life.

@addaemichael4683 Год назад

Thanks for your tutorial. I see videos using the Pico to do electric drum. But have not seen some which is a standalone with display. Can you make one?

@RoyalTech_2024 Год назад

Hi, GreatScott, good video. I have followed your steps to program Raspberry pi pico using Arduino IDE. The blank sketch also got uploaded successfully without selecting the port(Had to press and hold the boot select button when connecting to the PC, which you have not mentioned in your video). The problem is when I removed raspberry pi pico after the blank sketch upload and reconnect(Without pressing the boot select) it to the PC the PC shows the device as 'Arduino Pico' but can't create a COM Port, seems like the driver is not installed. Thus I can't select the port in arduino ide for the second upload and can't upload the sketch. Do I have to install any drivers for windows 8.1 for the pico to get recognized? Please help...

@PovlKvols Год назад

Wow - that looks like a pretty amazing board! Thank you for sharing!

@rbus 8 месяцев назад

I was impressed with the RP2040 right at the start because of the programmable IO which would lead to some amazing projects, notably driving HDMI monitors, audio applications using optical S/PDIF or ADAT, or other applications that would normally need an FPGA.

@IamTheHolypumpkin Год назад

The Pico is basically my ToGo Micropython/Circuitpython board. The large flash and the high clockspeed are great for an interpreted language. But for C++ I generally choose AVR or SamD chips.

@Dante-420 9 месяцев назад

9 instructions?! That's 8 more than I need!

@koushiks_energy Год назад

The teasing of inevitable in the ending is awesome mate More Pico powered power electronics stuff yaaayyyyy !!!!!🤩

@jrioublanc Год назад

Good point to show back compatibility with legacy projects. Danke.

@moneydriveshuman 24 дня назад

PIC Microcontroller is my first Love... No matter what...

@tylersingleton7992 Год назад

i've been watching you for years, your videos are way better than they used to be

@anonuser2640 Год назад

I’m super excited about this video 🔥

@mikolaj8776 Год назад

Is there an option to protect your code? Like fusebits in Arduino? I haven't found any. Have you found any way to protect your projects?

@gabekramer6416 Год назад

Great Scott I have a serious question for you.....What type of pens do you use? I know I recognize them but don't remember what kind they are.

@pseudo_goose Год назад

The PIO is easily the best feature of the RP2040 in my opinion, and I hope the concept sticks around for a while and gets adopted by other chip designers. It is incredibly useful to have those separate execution contexts where you can control GPIO with very precise timing without sacrificing time on the main thread. The other day I discovered that someone has written a PIO program for USB FS signaling, and demoed it as both a host and device... Simply incredible

@easyelectronics4364 Год назад

Can you make videos on protocol/peripheral driver implementations using polling, interrupts and dma. This can be your new series😊😊. Love your videos ❤️

@greatscottlab Год назад

Maybe a bit too complicated for me. But I will see what I can do :-)

@easyelectronics4364 Год назад

@@greatscottlab Sir i have learnt a lot from you and nothing is complicated for you that's what i know😅...

@anshulsingh8326 9 месяцев назад

I have coding knowledge. But I don't have much electronics knowledge. Never used Arduino or Raspberry pi. But I want to get into it for some fun projects I have in mind. Any suggestions and tips how I should get started?

@paulmichaelfreedman8334 Год назад

I made a led matrix scoller bar with a pico, using PIO. That little thing has some nice surprises on board.

Год назад

The only thing lacking on the Pico is a set of 8/16 bit hardware timers that can be incremented with external or internal signals. Most other microcontrollers have that built-in.

@Stabby666 Год назад

You can do that with the PIOs.

@daveb7999 Год назад

No Pico, so far, but did get the Arduino Nano RP2040 Connect with at least a taste of Pico Pi, along with all sorts of onboard gizmos. Thank You for the Pico update! Now, back to the Esp32 LoRa boards ... I just never realized how catching this MCU bug was going to be ...

@Zed_Oud Год назад

The chip, the RP2040, is $1. We plan on using 5+ on a board that has tons of I/O because it’s cheaper than an I/O expansion IC and it’s reliably available.

@adamrak7560 Год назад

wow, a uC is cheaper than an I/O expansion IC :D That is quite backwards!

@crestdazoltral7705 Год назад

How do you bootstrap and clock them? Do you throw a tiny SPI flash at each one of them or does some other MCU bootstrap them one at a time by emulating a compatible SPI flash? Are you running a 12MHz clock signal to each of them as required for the BootROM's USB bootloader or is the terrible internal RC clock after some tuning good enough for your application?

@vitalyl1327 Год назад

Why not a small FPGA (e.g., ice40)?

@Zed_Oud Год назад

@@vitalyl1327 There’s almost no supply for FPGAs and they are more expensive. And some of the same benefits of an FPGA can be replicated with the PIO feature of the RP2040 if needed. The different ICE40 ICs are $4-7 in bulk and a are out of stock or have less than a few K units available. A RP2040 is $1 without bulk ordering and 100K or more are available at any time. The big thing is that with how easy it is to program (and the documentation and community support), how cheap they are, how versatile they are, we might as well use RP2040s to replace all of our ICs.

@vitalyl1327 Год назад

@@Zed_Oud yes, forgot about the availability issue. Sitting on a stash of ice40s, so did not refill it for a while... There are small ice40 1k parts that are reasonably cheap (3-4£). Yes, PIOs are flexible, but still nowhere near as flexible as FPGAs for bit banging, so for me it is always a default choice.

@trainspotting_and_tech2023 Год назад

Thank you! Very informative! I think that there is no „the best board/microcontroller”! Each one has its own utility in certain areas! 🤔

@Drxxx Год назад

Great video, thank you !!

@greatscottlab Год назад

Glad you liked it!

@ScibbieGames Год назад

Currently some people are also looking into hacking the wifi hardware as it's firmware is uploaded by the pico bootloader from RAM, and because it's an ARM Cortex M3; could be converted into a number of smart peripherals for an extra boost in processing power.

@SimonEllwood Год назад

I was confused by the first few minutes where you said you had to use python when there is no such restriction. It then became clear that it was not compatible with the Arduino IDE then the video made sense. Good video.

@L2.Lagrange 2 месяца назад

7:20 I wonder if you could solder a few external caps or something to smooth out that line. Or maybe even do some hardware hacking and swap the reference with an LDO

@dozog Год назад

I haven't looked through the comments yet.. but on some uc's you can select the ADC reference voltage (to a DC voltage on a reference pin). If you need less noise, you could create a reference off your DC supply. or even use an external voltage reference chip. Still an odd choice to use switched power supply on board. In linear voltage regulators the efficiency is usually a function of the voltage difference between input an output terminal. So you should ideally not power your uc with a 12V DC power supply.

@Nightsd01 Год назад

I greatly prefer the ESP32. It’s also dual core, can support more RAM/storage, Even with completely custom designed ESP32 PCB boards that I build, it’s very easy to use them with the Arduino IDE, though for bigger projects I usually use ESP’s integrated development extension for VS code, it’s way more flexible than Arduino IDE.

@ssm445 Год назад

I second that. The ESP32 is a great microcontroller, easily tops the Pico in terms of memory and cpu speed, and includes Wifi and Bluetooth (in the Wroom32 package). It's a bit more expensive, but it's only 2 bucks. VScode is great, but I am now using IntelliJ IDE. Both IDEs are several generations ahead of the Arduino IDE and are much more productive.

@arshiajalali3622 Год назад

Awesome Video! I loved it! For your next Arduino Alternative Video (Which will now probably be in a millennia since you just did one), can you try out the Seeduino Xiao Boards? Thanks!

@greatscottlab Год назад

I can put it on my to do list

@arshiajalali3622 Год назад

@@greatscottlab Thanks

@edgeeffect Год назад

The Arduino IDE was the first things that started my move away from the Arduino "ecosystem".

@humphet3750 Год назад

For sure its crappiest IDE ever (from modern ones)

@JGnLAU8OAWF6 Год назад

Even calling it an "IDE" is too much IMO

@Stabby666 Год назад

What's really impressive is that someone ported Doom to run on the standard Pico - just need some resistors and a few jumper wires to connect a VGA monitor, and keyboard input, and audio output :) I was not interested in it when Python was the only option, but now C++ can access PIOs it's really powerful.

@Tracktark Год назад

When was python the only option? I was programming the pico in c and c++ since it came out. Even the MicroPython running on the pico is a c++ binary

@Stabby666 Год назад

@@Tracktark when it was first released there were no libs available for C++ and it was extremely annoying to burn the firmware. Sure the Pi foundation could do it because it’s their hardware and they had the tools. If you really were programming it in C++ since it came out you were alone. I bought one when it came out and left it on the shelf for months until the tools to program it in C++ became available 😁 (I refuse to use Python on microcontrollers).

@Tracktark Год назад

@@Stabby666 Also, yeah it is annoying to burn the firmware manually, but if you have another pico laying around, you can put the Picoprobe firmware on it and use it not only as a debugger, but also to upload your programs without having to disconnect and reconnect it all the time

@Stabby666 Год назад

@@Tracktark Yeah, if I'd had two of them it probably would have been different 🤣

@djmips Год назад

@@Stabby666 They are cheap so no reason to not have two!

@NOMOREPAM Год назад

The PicoVGA is a great proyect. I'm doing a long learning session of it.

@hacerdemirel9833 Год назад

To sum up, just put "digitalWrite(23, High)" on all your code. Is that all? Is that simple? No missing?

@andersson.l.e Год назад

Nice and interesting as always.

@martyb3783 Год назад

Great video!

@dzuppi Год назад

Can you tell us a bit about the power consumption? E.g for a battery driven project? Thanks

@gwm249 Год назад

Have you checked out the Arduino Connect board that uses the RP2040 chip. Built in wifi, BT, Accelerometer and a bunch more.

@Simon-lj8bb Год назад

Would this be any good for a diy weighing scale ? Maybe you could do another diy or buy episode!

@bearwolffish 2 месяца назад

That is one thing about struggling early so as to be able to always code AVR's in C/C++, without so much abstraction. It never feels like much to make a switch. Arduino/Pico/Flipper Zero.. you name it. Can usually just change some of your own low level abstractions and definitions, as the protocols stay the same. Interacting with a shift register is still going to want the pins toggled in the same order. Sketch can scare people away from feeling confident in certain aspects in exactly the same way micro python can. Both can be wonderful tools for learning but should be stepping stones.

@DavidMulligan 7 месяцев назад

Where can I find the feature comparison table that was shown at 0:37 ?

@xani666 Год назад

2040 is really the place where you see a ton of benefits getting away from just arduino code, it has a lot of cool stuff that you kinda need to get low level to use well

@Zagoorland Год назад

Have you tried coding with VS Code and arduino plugins for it?

@comfixit Год назад

The Pico can also act as a HID (Human Interface Device) which is a nice feature that is found on some but certainly not all Arduino compatible boards.

@affieuk Год назад

I wonder if the Pico can replace nice nano's, way over my head, so I guess I have a lot of learning to do!

@clarencefultz6474 Год назад

Hi, I'm not sure where to put this so I'm posting it here but I think a auto transfer switch could be a cool idea for diy or buy since it is pretty useful.

@MWGrossmann Год назад

Can it read from the outputs of a 555 circuit? Can it be connected to all pins to better "understand" what's going on with each analog component?

@TheInventor202 Год назад

Nice vidéo 🔥

@user-ik3jh7kr5n 3 месяца назад

can you fix the analog noise by useing a battery as power input directly to the 3v line ?

@adinko7 Год назад

Can you make an silent car alarm with lora long range and a device that you have at home and if the alarm is triggered in the car the device at home starts screaming.

@nzirani-io Год назад

this intro is just amazing !!

@yash1152 Год назад

so, will u switch to arduino IDE 2.0 ??

@kentahirono Год назад

What are the performance when comparing to the Arduino uno/nano/mini, especially with O2 or O3 optimizations into the compiler strings?

@Stabby666 Год назад

It's so much faster and has so many more peripherals - along with DMA and PIO units - there's no serious comparison. You might as well compare a wheelbarrow to an F1 car...

@KwanLowe Год назад

I enjoy your videos, and this one in particular.

@greatscottlab Год назад

Glad you like them!

@jonnypista52 Год назад

My final thesis was on a pico, I programed it in C++ with exception handling, other than the low level, like the I/O, everything else is the basic C++, you can use classes and whatever the standard library offers. Can even dynamically allocate memory with the same syntax. ADC is trully not the best, but swithing to PWM mode, external reference (I needed one anyway for my DAC) and softvare help to reduce gain error it was acceptable. The best is the big RAM and the speed (can even be overclocked to 300 Mhz or 450Mhz if you don't use the flash), it can do something like 68Mhz SPI signal so even my big 240*320 16bit color display changed basically instantly. No clue how the display processed it as on oscilloscope the clock looked like I'm charging a capacitor, the PCB was not designed with high frequency in mind. Also the price, the ESP32 I managed to buy without waiting for China was 15 euro, while this thing was 4-5 euro and Arduinos are also cost more.

@mikejones-vd3fg Год назад

I saw a video where a guy uses sprintf from C versus cout from c++ with the same code and the C++ binary was almost twice the size... im no sure c++ is your friend either when it comes to microcontrollers

@evanbarnes9984 Год назад

I'm really curious what your thesis project was! I'm considering grad school for something like embedded systems

@jonnypista52 Год назад

@@evanbarnes9984 For us there was a lot of project ideas for grabs, my was a transistor tester and identifier, it measure resistors, capacitors, diodes and transistors. Even draw characteristic diagrams for transistor fully automatically.

@jonnypista52 Год назад

@@mikejones-vd3fg I used the whole serial out for debugging, the whole idea was to make it work as a standalone device, the end result had like 4 cout, which was redundant. I used C++ for OOP, I would had given up on it if I would had to do the whole thing with structs and basic polymorphism, overloading. Also it depends on which mode it is compiled, I used minimal size which cuts out a lot of useless part, like debug info.

@fkiesel9442 Год назад

@@jonnypista52 It the project available somewhere? It sounds really interesting.

@gerrikoio Год назад

For those who want to use Arduino IDE and C++, but do not want the hassle of setting up earlephilhower's arduino-pico core, there is also the official Arduino Mbed OS RP2040 Boards option found in the Boards Manager tool. I've had no problems so far with version 3.n Another thing worth mentioning is that Pico board uses separate flash via QSPI should anyone think the RP2040 chip can be used on it's own (it only has room for bootloader).

@George196207 Год назад

Wow ten of these some coils a large capacitor , power tool battery a metal tube and you have a neat project .

@michaelschecker2716 Год назад

i ordered some and will have a try in MicroPhyton is there anywhere a list how long MicroPhyton commands need

@LostDeadSoul Год назад

How about adding decoupling capacitors to that power supply? If it has multiple frequencies at different loads, just decouple with different capacitors, a decade apart to have broad band decoupling.

@brainnotwrkin 5 месяцев назад

I have 2 pi pico w's and an esp32-s3-devkitC. I have not touch my uno in a while. I guess the only annoying thing for me is that in both models of boards they run on 3.3v which is sort of annoying but just a bit of extra circuitry to step it up. (Or just use an external power supply with some mosfets).