The reality of owning an American car. 

I wouldn't weld a washer on it, I'd plate it with some nice thick steel and it ain't gonna happen again

100k Congrats LL!

Shoulders looking juicey Lee 👀 💪🏻

yea id get some re inforcment plates mad up for there its like when we have to reinforce the rear sub frame mounts on the e36 welded some thick plate to stop the studs being ripped out the floor . id get some plate made up and get it welded in

Excellent content. Enjoy how you show the job being done with the issues you encounter. At least there is no rust!

Still loving your content after many years regardless of what you do but please do the dashboard on the mustang 🙏🤞🏻😂

That diff yoke you took off will have a bearing tolerance so don't just impact the nut back on when the new seal comes... you will wear the pinion bearing out of its too tight

I'd deffo be getting a plate in there, washer will be done by the first drift day. Might be better getting the plate put on the other side so the arm can still fit back in.

Loving this content, love the problem solving. And learning the drift life. Great work fella 👍

another quality video young man 👍👍👍

Get some 5mm plate and drill the right size hole in it, a washer wont last long especially drifting

the jobs you do on the driveway & what you did outside of your old place some people wouldn't attempt on a ramp ! hats off to you Lee you aint scared 🙌🙌 and I have to say thank you for taking the time to have a pic with me last Sunday at CCD 😀Legend

Another gr8 video. I saw you today (friday) driving down the east lancs @ haydock Island, I heard that jag before I saw you 😂 Car looks stunning.

Great work Lee, well sussed out mate❤👌🤟🤘

Best way to deal with them clips is find a socket that fits snug over spring collar to push them in and pull the cable out from the other side. Also that diff looked like it had way to much back lash so its more than likely been wearing out the pinion and ring gear under harsh acceleration, This would also put strain on the pinion bearing, the movement in the bearing will strecth the pinion seal rubber causing the leak. I would get it all checked for peace of mind. Other wise you will just be blowing through seals like crazy.

Don’t be defeated mate keep up the good work, the previous owner has bodged that car like crazy

Another Amazing Vlogs ever 👌

Shes giving us lots of content that stang 😊 Great channel Lee always a great watch 😎

I would bracket all 4 sides while you have the opportunity,also diff seal their should be a number on th seal which are universal descriptions You can then order them from i places like simply bearings or Cole Palmer. Brilliant video by the way😵‍💫😈😊

Great video lee 🙂👍

Push a socket over the cable clips too press the tabs in,,,,your welcome 😂

If there's enough room. Open the holes up in the chassis and weld some shoulder bushes in place

I think it’s time to invest in a mobile car lift / car scissor lift they would be perfect for you with the limited space you have and I don’t no if your aware but you can get rollout awnings that would fit perfect above the garage door 😂 . Great content tho reminds me of when I was 17 😱 Jokes been a sub for ages just trying to help with not a lot of cost

I was almost 100% sure a cutting tool was coming out for that handbrake, you must be feeling ill?😊

Great video

Never expected that an old Land Rover would be more relaible then a Mustang 😀

Hey lee I saw you at the Kendal car show just to say my brother really loved seeing you but was just to shy to say hi so just to let you know we say your mustang (the one you had in the video!) and we loved seeing ya there!

The washers would have to be on the outside or there going to reduce the width and the arm wont fit back in !!!

As you still live with your parents !!!! do they not give you wrong for getting oil all over the drive way that they worked hard to pay for ? Just wondered

Love the content but what's happening with the road to 10k think with the cars the bora

Yes Lee Another Headache to gain with more Problems on the Mustang 😱 I Swear every Car you've brought recently is either Shit,Stupid or Really Difficult To Work on 🤔 But I'm Still Loving Your Content after many years of watching you since the Clio Days with what you do the builds & Projects you Make and every Headache that Comes with it 😂 Keep up the sick content as always I love it ❤

I think the best solution is to make a sleeve through the holes, a washer is a good idea, but the welding can make rust and weaken the frame if you do a sleeve through the hole just like the bush has leaf going through it that’s it. Do the job for you

Mothers E46 has been sat on the drive since all the junk Lee has bought since the Astra.

Gassed to see you at Ford Fair if you make it bud 🤣🤞

Maybe a bigger bolt / smaller bushing

Im sure it shouldn’t be resting on the threads of the bolt- thats why it has a shoulder. Get better bolts

Dont you need a mechanical handbrake for the MOT?

Definitely wouldn’t weld a washer to that lee wants some thick steel both sides & same on the other before it happens 😂

You’ll need a new diff mate if I remeber the damages to the crown wheel when you had it welded looks like the bearings had it causing that damage and that will have caused the seal to leak, a new seal will only fix it temporarily

Don't weld a washer in its will do the same thing again. Weld in a semi captive hardened steel nut that's same thread as the bolt for your trailing arm. Fixed forever ❤

Send your diff to a gearbox specialist they will have a seal for it no doubt

What happened to the bora?

Put a shirt on lad i just spit out my bad boy pot noodle then.

is the BM for sale yet? ;)

Wait what happened to the 190E?

If the diff is flexing the seal on the diff will be Fubar mate. No designed for flex.

Weld a tube all the way through that will make it stronger much better than just welding a washer

Could it not be something do to when the bmw bumped into you? It was rear axle area 🤷‍♀️ could of been that what's started it originally

"Think she's about to come"

Lee this is totally off topic but what are you doing with that e46? Im after one thats all!

Hello Lee,,, what's your average daily diet

Do u miss the 350z 😉

Who needs a Mercedes for 4 wheel steering ayy

Why didn't you just cut them off¿

Americans be like “ the reality of owning a European car” lol by the way love the channel❤️

How dya get ya body fat so low? How much cardio you doin? Are you on keto, paleo, Atkins?

Lol, just cut the cable, your scraping it anyway 😁😁😁😁😁😁😁😁

Have to love American engineering. 😂

Just cut it

That 350 z must of been a right heap if you thought it was a good idea to swap it for this bag of shite it’s just a money pit oh well your money

it doesnt seem worth it... hate so say it Lee ahah

Brother please get rid of this shed

Trying to build the most un-roadworthy car in the UK 😂

I hate American cars. I would scrap it.