The Secret To Putting ANY SUSPENSION Into ANY CAR!

Подписаться 702 тыс.

Просмотров 172 тыс.

50% 1

In this video we make MASSIVE progress on the Drift Truck! First, we get the front frame 100% bare, clean, and ready for fabrication. Then, we make a suspension jig off Hunter's 240SX S13 and transfer that jig into the Drift Truck's chassis. This will allow us to accurately fabricate a tube frame around the jig. Once that is done, we can bolt 240SX suspension into the truck!
SUPPORT ME HERE! ► / gingium
OTHER VIDS!!
Quick Builds► • Quick Builds
Drift Truck ► • Drift Truck
Rally Miata ► • Project Rally Miata
Eclipse ► • 1G Eclipse
LS Volvo ► • Volvo Sleeper
BE MY FRIEND!!!!
Follow me on Twitter ► / _gingium_
Follow me on Instagram ► / gingium
MY RECORDING EQUIPMENT!!
Camera ► amzn.to/3lVq7J9
Lens ► amzn.to/3yhf168
Microphone ► amzn.to/3q4pv5x
Tripod ► amzn.to/3pOGiZR
Carry Bag ► amzn.to/3rV50uz
SD Card ► amzn.to/3lQdv68
MY FABRICATION/MECHANIC EQUIPMENT!!
Welders & Supplies ► www.usaweld.co... (code: GINGIUM)
CNC Plasma Table ► store.langmuir...?aff=23 (code: GINGIUM)
Tube Bender ► www.roguefab.com/ (code: gingium25)

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 263

@ragegamingvideosify Год назад

It is extra clear that you just keep getting better and better at working on cars. This is going to be the best build to date for sure.

@jonathan24seda Год назад

Somebody needs to gift him a cnc or a mill

@ragegamingvideosify Год назад

@@jonathan24seda funnily enough I have a second mill and a second baby lathe. They aren’t for sale, but for the right number lol

@jasonpetrich4141 Год назад

@@jonathan24seda $10,000 no problem.

@harryfp1494 Год назад

@@ragegamingvideosify how the fuck is that funny at all ? Is this a joke to you

@ragegamingvideosify Год назад

@@harryfp1494 me selling my tools? What are you talking about?

@DingDongDrift Год назад

man this thing is gonna look freaking wicked with that tube chassis!

@_Gingium_ Год назад

Yeah I’m super excited for this one

@jasonpetrich4141 Год назад

It will look the same 😒 the truck was ok, His driving needs 15 yrs worth or work!!!

@kings_nemesis5995 Год назад

@@jasonpetrich4141 obviously but seat time and having a properly setup drift truck will help

@tophatvideosinc.5858 Год назад

@@jasonpetrich4141 it really doesnt take that long to learn, youre just tossing out that number to be an asshole.

@Vtec24 Год назад

You have no idea how much I wanted to hear him say "Finally, the jig is up" when he had it welded into the car.

@douglaspealing5608 Год назад

I'm glad I'm not the only one

@Cobra_427 Год назад

4:15 Honestly impressed with how unmolested that S13 is, not a single mod, even the pinch weld in the front wheel well is perfect, everyone hammers that pinch weld down for wheel clearance, so I've never seen it in pristine condition before

@_Gingium_ Год назад

Right!? So much potential

@Leandro3065PT Год назад

this, and the pignose bumper small grills, everyone removes those to either cut it there, or they just got lost years ago

@michak.7993 Год назад

@@_Gingium_ Is that a hint that something's coming up with the S13?👀

@bradt9244 Год назад

Cant believe you didnt say "the jig is up"

@Apodaca11 Год назад

I love this series so much. He killed it the first time and is about to make a legendary build again.

@ryanbenedict8780 Год назад

Haven’t watched one of your videos in a long time. I’m super impressed with the production quality on your videos now, this felt way more professional than I was ever expecting. Good shit

@johnjohnalmand Год назад

I'm glad you didn't stop the video after you made the jig.

@corruptedo1 Год назад

Your production quality is top notch. Here's to hoping for 1 Million+ subscribers in 2023!!

@cadenharrison5299 8 месяцев назад

Gingium is one of not just the best car enthusiast but one the dopest dudes ever to exist, what living legand. I am not just inspired but also educated in so many ways after your videos. Thanks for all your content and everything man honestly I look forward to what the future has in store

@merciless9285 Год назад

honestly I've been watching you religiously since you started the rally miata and you're always keeping the content as good or better, figured its about time to sub to the patreon. I appreciate your work man as a fabricator-in-training I aspire to build custom cars like you some day!

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,i got something for you🔥

@toxicsledgeful Год назад

It is criminal the amount of subs VS quality of contentious content that comes from this channel! There's 20M subscriber channels out there that don't even do a fraction of quality work compared to what goes into these videos and projects. Straight criminal!

@JMRRebuilders Год назад

Let's go baby. Been waiting for this video. Kinds crazy last time we helped ya get metal now getting it on your own. We needs to get together bro for sure.

@roachwerks3043 Год назад

love that you work in metric. im an engineer by training and whenever im forced to use inches and fractions it gives me a headache. my brain still thinks in inches and feet though lol

@Flaccidass Год назад

Seing someone who knows what theyre doing and doing it well makes projects like these seem obtainable. Thanks for your work man

@builditgarage Год назад

Looks good, you should get a digital level so you can see the actual angle instead of guessing with the bubble. Keep up the great work

@jessefrank3412 Год назад

God, I get such a kick out of watching gingiums builds, his videos and skills as a builder/fabricator just keep getting better and better over the years

@1993Revhead Год назад

This channel is ridiculously underrated. I hope you hit 1 mil in 2023 ging.

@SiggsGBR Год назад

Loving the videos, and the fact that S-chassis people will be quietly boiling over at the tension rods being called trailing arms. Keep up the great work!

@donovanlucibello379 10 месяцев назад

It may be a little thing, but I love when people use PPE in their videos, thanks for posting this awesome video

@alep_sn9550 Год назад

All this jig work on a 240 made me feel like I was watching prizzamike lol

@birkmh Год назад

This channel is just getting better and better! Always stoked whenever you upload a new video!

@jackkrupka3024 Год назад

Your way of coming up with a jig to adapt the suspension is so cool! I am definitely going to keep that in mind for my project SXS using subaru parts.

@BerryMan427 Год назад

Ging, metal worker here. Larger companies can leverage buying power and those 5 lengths would cost my company less than half. Food for thought.

@JacobAndrewRowe Год назад

Roofing shingles make excellent shims under jack stands.

@ONEKILLERXT Год назад

I've watched your channel for YEARS and I feel in love with this truck, I have a 87 Mitsubishi mighty max I want to turn into a drift truck as well

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@CalicoRiot 6 месяцев назад

Just discovered your channel! Im swapping a 5th gen camaro irs into my 69 gto and was checking out how different people went about similar things. This here was the smartest thing ive found by far. Pretty slick dude, pretty slick.

@Wingspan_5 Год назад

You never cease to out out top quality automotive content!

@steng.karlsen2662 Год назад

Maaaan, i love the drift truck and these FABium videos are my favorite you make. Been loving the channel for years but i like you videos more and more as time goes on, usually the opposite of what tends to happen with youtubers and their audience. I think I speak for a lot of people when I say you just keep getting better and better at this

@I.am.notgood Год назад

Nah its actually insane how far you've come.

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@janwalter9608 Год назад

Am I the only one who is getting a heartattack when he ist cutting with gloves... Still love your content keep it Up☺️

@antuanperez426 4 месяца назад

Yeah anyone with a brain prefers cutting with out gloves

@erodshs50 Год назад

Would love to see another truck build after this one.

@fapnisseverdeen9596 Год назад

It's probably already been said, but the two things I noticed that could help next time are RV LEVELING JACK STANDS (they are threaded), and a SEAMSTRESS TAPE for some of the measuring. I love the video. I can't wait for more.

@grantwaldemer2570 Год назад

You're probably planning to, but if not I'd highly recommend radiusing or angling the ends of the frame notches when you box them back in -- those right angles would leave you with gnarly stress concentrations

@roxburndi Год назад

I'm wondering if you verified that your 240 chassis is true before you used it as a reference for your jig? 25+ year old chassis might have experienced an incident or two along it's journey to you. When you leveled both vehicles, what reference points did you use to verify that they were level?

@skillstacking Год назад

This channel is gold

@802Garage Год назад

Really cool. Your work ethic always blows me away.

@wowdogeful Год назад

Honestly impressed with how clean everything on the B2200 still is. It's a 30 year old Japanese utility vehicle with the rust protection of the average 30 year old Japanese utility vehicle, but the frame is still in very good condition and the underside of the cab looked almost as new when you removed it in an earlier video.

@yig1993 Год назад

Gingium got an engineer degree 📜 from experience nice 👍🏼

@Tonksyyy_ Год назад

I could watch this kinda content all day. Subbed!

@jonasmarotta8195 Год назад

Not saying “the jig is up” at 18:19 was kind of upsetting I’m not gonna lie. You still earned the like though as always

@innis4483 Год назад

Hope your holidays were good!

@UnitedHarderStylezZ Год назад

just wanted to say, it is just amazing to watch these video's. so many small details and cuts, makes it really nice to watch! it also is very interesting, keep up the good work! I watched all your Volvo video's, but all your video's are sick, subscribed ;)

@notimportant8120 Год назад

Man you have no idea how this helps out a lot of people around the world man, and speaking in metrics 😂 Liked and subscribed!

@ryanlott6309 Год назад

Seeing your evolution is amazing. Can't wait to see this truck done again!

@metalmuscle5083 Год назад

Bro your builds are getting next level.

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@user-ft6nr2ho9g Год назад

Plasma cutters are soo cool! It’s mesmerizing to watch it turn a sheet of metal into cool little parts

@OneTimeImp902 Год назад

Happy holidays man! Really enjoying the work you're doing since you've got the new shop!

@paulsimonsson Год назад

Wow, use of the metric system! Makes me happy for you, must be so much easier.

@CrazyCat229 Год назад

What a great build series. Thanks so much for sharing the journey!

@David-82 Год назад

I try not to miss any episode, but I almost forgot to watch this one.

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@skateecho Год назад

Ohhh this is soo exciting. Loving to learn your thought process and how this is going to go. Really coool project and im super excited for drift truck 2.0! Going to be maaaaad!

@jonathanstudt9040 Год назад

Plumb Bob needed for the tool box

@alexcapps9290 Год назад

You could prob sell those s13 suspension jigs or at least all of the files for making one.

@jaakkomakinen1783 Год назад

Ultimate builder Gingium!

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@szep. Год назад

already an amazing series

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@aplong1911 Год назад

Excellent video! Very informative. I can learn a lot from this content.👍🏼👍🏼😊

@thunder_lloyd Год назад

Good stuff! You have me wanting to do a 240 front subframe on my s10!! lol

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,i got something for you

@christoskaragiannis7973 Год назад

Sick intro. The welding showing through the gingium logo was epic

@b_for_brett Год назад

So happy the front suspension on the truck is getting re-done 👏

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,i got something for you🔥

@lordodin5755 Год назад

Oh i cant wait for the next part love these kinds of builds

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted.

@tommytech55 Год назад

Be safe in your travels. Merry Christmas. I'm originally from Danville il retired in Florida. Can't take the cold anymore. Working on cars in the Midwest in the winter sucks

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@GR-hk4vd Год назад

Minor correction. Those couplers don't allow the tube to cage to retain its full strength, however they are quite handy. It really depends how they are oriented and where are you expecting loading from. In the event of a crash, if the fasteners are heavily loaded in shear, you may have a roll cage failure. This is why the faces should always be oriented in a way that the flange of the disconnect is bearing the load and not the fastener itself (fastener would primarily be in tension or compression in this orientation). They are extremely convenient though. Would recommended using the interlocking variant where possible. Great video, thoroughly enjoyed the content!

@christophercasey9536 Год назад

You give me more and more motivation with every video!.... And to that good sir I say thank you..

@JTSMotorsports 4 месяца назад

Dude, your stuff is the best! 💪🏼🤙🏻😎

@sumuditha6602 Год назад

Miss you so much eclips 😪

@francoismoolman8498 Год назад

An American using metric measurements.. I'm impressed!

@ikmalsomadani9970 Год назад

You have to bring this truck to an event mate Maybe klutch kickers if youre confident with it

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@hectGamer66 Год назад

Happy new year to you man. Hope you had a wonderful year, I sure did with all the amazing vids you did this year to entertain us. Looking forward to what the next year will bring for you. Keep it going ma man 👍👍❤

@ryanwebster2167 Год назад

very informational for my future build thank you!

@ryanwebster2167 Год назад

@Gingium

@robertbednjanic4060 Год назад

you learned a lot from italian.. 💪

@_Gingium_ Год назад

Absolutely! Matteo the goat!

@lorriecarrel9962 Год назад

Thumbs up well deserved,good work man

@MiiaFoxx Год назад

Man I still can't get over the fact that you went from Forza builds to actually nutty SEMA tier shit. God *dayum*

@whatthe363 Год назад

This is something ive been thinking about doing a lot recently. Havent started watching but I know its gonna be the kick I need. I want a RWD honda powered 95 prelude. Always have. Would be a testament to my fabrication skills.

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,i got something for you

@scottellis6438 Год назад

Where are youuu we miss you

@V8interceptorChannel Год назад

Thanks man! this video answered many questions i had

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,i got something for you🔥

@Couch. Год назад

You have come a long hell of a way since project BRAP💜 keep up the growth and good work my guy

@ericcrear1359 Год назад

Love your content. Always excellent and always giving me great ideas.

@gordot87 Год назад

This makes me want to build a truck Like this. only problem is work space and that evil thing called MONEY. Keep up the good work. Love the build

@donpollo4924 Год назад

The B2200 is the best videos ❤❤❤🤯

@richardculbertson8027 Год назад

Caleb there called tension rod brackets not trailing arm brackets as they would be behind the subframe where as the tension rods are in front of the subframe. And please don't think I'm trying to be nasty I'm not just trying to add to your knowledge base dude

@_Gingium_ Год назад

Thank you! I had a hunch it was the wrong name but never knew the correct one!

@BF26595 Год назад

Love the content Gingium 😊 Quick note, please consider investing in some safety shoes when working in the shop, they are not the most comfortable thing in the world but seeing things always hit the floor inches from your feet is somewhat discomforting 😬

@emanh4keem_san420 Год назад

Pandem E30 bodykit on that looks lit thats what my mind said

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,have got a surprise for you

@thefox9925 Год назад

ALWAYS click as soon as the notification appears... *ALWAYS!!!*

@markthomas3853 Год назад

man you so missed the opportunity "the jig is up" at about 19 min in lol... looking good

@dumbestoyster Год назад

Got to say, I like your nice new short intro

@Ryanshaw01 Год назад

Text me⬆️ on the telegram handle above,you have been shortlisted

@JZ-tg1cm Год назад

When you are ready to up your game, take a road trip to Ariel Atom in South Boston, VA. Get into modifying those and you will become a world class designer. You are totally talented enough, and tooled up to do such a thing. Get in to super cars. and Ariel is local, meaning 2 states away... I'm sure they would be open to working with an innovator like yourself.