THE SERGETTI TENNIS STRINGING METHOD - MORE POWER, MORE FEEL, LARGER SWEETSPOT! HOW DOES IT WORK? 

I’ve used proportional stringing for decades. It’s especially great for small-headed players rackets like the head prestige mid. Makes the whole head feel like a sweet spot. I generally start the center mains at a couple pounds higher tension than normal, and I start dropping the tension a pound each as the strings get shorter. This gives extra control in the sweet spot, and helps compensate for a little tension loss caused by outer mains being lower tension. I find there’s generally less need to proportionally string the crosses, although if you have a racket with a dead tip, you could start out stringing at the head a little lower and it will liven it up. Before I tried this, I also believed the string tensions would equalize from play, but experience has shown me otherwise.

we made an unbiased amateur players review on our channel comparing Sergetti and Conventional method, most people who tested out felt softer feel overall but the conventional method still feels more pop on-center hit compared to sergetti. try out a direct comparison between conventional and sergetti with the same racket and tension, thumbs up on the tension maintenance, thumbs down on the durability.

I've been using the Sergetti method for the past couple of years...I use a Wilson Clash 100 Pro customized to 325g...originally I played tested Volkl V-Square @ 50 lb.with regular stringing and the Sergetti method...After a couple of weeks, I prefered the Sergetti for the same reasons mentioned above; ball pocketing, better feel on any "off center" hits, etc...I've had some customers that like it and some that don't...my .02 is that with better improvements in frame quality and string choice, it makes sense that string tension may be the last frontier...it's definitely worth trying...

Thanks again!! Good info!

I use it on my four Head Gravity MPs. It's opened up my string bed since I started using it back in November. It's a total change from pulling the tension the same every time. My composite tension is 51lbs.

I use this method on my rackets, works great with stiff poly but i string about 2 pounds tighter than normal to reduce the trampolining of the ball!

I have created my own proportional stringing which is somewhere between normal string and sergetti and i already notice those enhancements. Not as extreme and elaborate as sergetti, but it works for me. It evens out the string bed towards all edges with lower tension with a higher tension in the middle. Bigger sweet spot, better response of the bed, livelier string bed (which includes power and spin), less inconsistency outside the middle of the racket and all that without losing any of the control I have multiple different rackets and like to try rackets and string setups. I cannot afford to have a customized sergetti for each variation. But if you have the same rackets with the same strings i think it is worth it to get a custom sergetti sheet Especially if you like 18x20 dense string patterns like me. 18x20 string patterns tend to have already a smaller sweet spot than 16x19 and more stiff bed because of the density. Especially then it makes a huge difference

I also have a personal technique to apply a unique not replicable tension to every string on the racket since many years ago, it is called "having a shitty manual stringing machine".

Harry, do the review of Ivan Lendl stringing method of gut/poly or multi/poly. Cheers

Tried it.. I didnt like the original tension provided it felt too stiff.. For instance I play with 45lbs on my racquet.. Sergetti will require more than 45lbs on some strings...So i changed the tension where the maximum string tension on the racquet will be 45lbs and lowered the rest by the same percentage... Now I like it and works really well.

Thanks is usefull

How does this compare with the jet method or the proportional stringing method?

Snake oil string job

Do you have a promo code to get a sheet?

Will it charge much more to string it that way?

Do a reverse sergetti looser string tension in centre

12*1.7 equals 20.4 percent of the string bed?

Hi I love watching your channel here in Australia. I have a question for you about hybrid stringing,. Which combo will generate more spin. Multifilament mains with polyester crosses OR polyester mains with multifilament crosses. Please keep up the good work - cheers Len

When you tie off on the ends (mains), aren't you losing tension on the outer strings, anyway?

NEW Wilson Clash - its time to Test it out.

What I would like to know is how the different tensions from string to string do not look to equalize, what keeps that string locked in at that tension?

For a legitimate comparison surely you would have to give Coach Gu and Chien a racquet that's freshly strung using the normal method and then also another one using this method without telling them which racquet is strung with the sergetti method? Also worth asking the question, with this method will it cause damage to the racquet frame (I suspect not) - but after paying Sergetti for the sheet and service is he liable for any damages incurred to the racquet (I suspect not?)

I have question, when you said i strung my racket 48 pounds, you pulled mains at 48 and crosses 48 or 48/44 or something else :)

they need to do a blade pro Light

how do you maintain different tension between every other string? making knots on end of each string?

Question(s): 1. Does this method have lots of tie offs? 2. If no multiple tie offs, won't the tension kind of equalise all too quickly, negating the unequal tension? 3. Is the blueprint expensive to purchase?

If you start with the 2 middle mains strings at 55lbs for example and you reduce the tension by 1 lb (eg) each string, what do you think happens to the string you release with the looser tension. I would guess the first string you pulled at 55lbs is no longer 55lbs but closer to the 2nd string tension. what happens when you get to the outside main (if you are doing a hybrid) and your tension is down to 48lbs, if you don't add a tie off tension your outside loose string will be 43lbs when you release it and it will effect the 2nd and 3rd outside main string tensions. The same with the cross strings. Do you really think any touring pro will use this method week in week out, especially if they use onsite stringers. One tension fine, two tensions fine, 35-38 different tensions is a recipe for trouble. Best pattern I used for our touring players 1 piece was a 3x3 box pattern, especially high tension, natural gut 18x20 racquets. As time went on and more hybrids came in, tensions dropped dramatically sometimes to mid 30's. If you are hitting so many shots off center that you need to think about stringing looser on the outer strings then wouldn't you use a different racquet to reflect your playing skill level. Anyway just my 2 cents. Someone correct me if I am on the wrong track. I have seen many patterns come and go and not one is picked up by the players that really need the accurate, reliable patterns on tour.

Once you start hitting doesnt it all even out? Like the ball smashing on the strings should even out all the tension?

I can tell you why! Because each length of string has different elongation, for example, if the string has 10% elongation under pressure. The longer section will elongate more absolute value. I bet he has longer sections higher tension.

👍

What is with all the bandage up fingers?

Have you tried the spaghetti stringing method?

Look at the bed of your racket, it was made to maximize the sweetspot, it doesn't need Sergetti.

My feeling is this type of stringing is just all marketing. Stringing each cross and main slightly differently due to length to create an effective tension may sound scientific but unless each main and cross is individually tied off, the fact that the string job is either a one-piece or two-piece will simply lower the overall tension of the string bed. A lower tension will simply give the illusion of more power and a "larger sweet spot." I would try the Sargetti method in one racquet at their reference 50 pounds and another racquet at say 45 pounds and then do a blind test to see if a simply 10% reduction at 50 vs Sargetti 50 are any different.

It’s not the wand, it’s the magician.

@t web site is not working

Who are the world tennis pros who tried this tensions specially italian pros?

What pros are using this method?

初め

why does it feel like I'm watching an internet infomercial where its blah blah no actual details blah blah then call this number or visit this website? lol smh

Sergetti Stringing is such BS. Tried it on my RF97 v13. After playing for about 15 mins. I noticed a lot of inconsistencies. Waste of money

Unless you have incredibly rough grommets which may break your strings anyway, the uneven tensions will even out within one hour so in conclusion, unless you're willing to change string jobs every hour, this method is useless. There are better, cheaper and easier methods to achieve the same principals. Just do some research.

I like this channel, but this is utter nonsense!