#telerupteur #telerupteur #
The best way to install a teletor
The easy and correct way to install the teletor
Easy to install the Teleraptor
Simply install the teletor
May the peace, blessings, and mercy of God be upon you.
How to connect the teleporter and control the lighting from several places.
For this delivery we will need:
differential breaker
Single phase breaker
Three bouton poussoir
Lamp holder
a lamp.
delivery method.
We connect three buttons with a bracelet with a red wire and get out of the same hole with a wire that is the phase, then we take yellow wires and connect each button with a bracelet in the remaining hole between them, so that their installation is in parallel, whether for the rotor or the phase. We take out a wire from the rotor and connect it with A1 of the teletorptor, And the red wire that came out of the buswar, we connect it with the cutter in the place of the phase, and we also connect it with number one 1 for the teletorptor device. Then we take out a wire from number 2 for the teletorptor device and connect it with the lamp, then we take a blue wire from the cutter that plays the role of the noter, we connect it with both A2 of the teletorptor device and the lamp .
When we press any button or busbar, the phase passes to A1, the teleporter coil turns on, contact 1 and 2 closes, and the phase passes to the lamp, knowing that the latter is already connected to the neutral, and it will ignite. If you want to turn off, you can press any of the three buttons.
Architectural electricity education
Domestic electrical education
5 май 2023
