The steps it take to replace your radio Chevrolet Camaro 

Why you got to put Latin music when my boy Fernando is on? Lmao

Good video but if install this kit, how do I access the cars programs that usually showed on the old radio screen such as door lock/unlock programing or headlight on / off time etc. and all the other features that showed up on the stock radio. Will those features show up on the new aftermarket radio or now be inaccessible ?

Honestly this video saved my life... thanks so much guys. this is amazing 🙌🏾

any issues with these kits 2 yrs later?

Fernando's shirt is awesome!

If my car didn't come with a factory backup camera, will there still be a reverse trigger in the pac harness?

Great video, I used it to install my new system. However, did you guys also have the issue that the factory blinker sounds and backup camera warning sounds are now gone? If so how do you get these back?

What if my temperature display isn't on?...is there a way to turn it on or is it just not working.

interested in doing this for my 2010 SS im 3 hours away and will make the drive to you guys please let me know what this runs with adding a reverse cam

WARNING to anyone who uses this wrap tape! DO NOT WRAP YOUR WIRES until you know it works. or else you will go through living hell trying to get that stuff off the wire so that you can debug the situation. ESPECIALLY if you use crimps to connect your wires.. CRIMPS ARE HORRIBLE!! even the good ones.. crimp it wrong in any way, and you'll have something not working right. truth right from the front lines!

HEY MAN on off chance you still read this, just watched your ROCKFORD FOSGATE VIDEO on powered sub, of which im trying to install in my CAMARO. what wires do i hook to for signal hi level inputs on a 2015 camaro with boston acoustic 4 wire speakers in the rear? on left side i have the dark blu white stripe wire and light green black stripe that seem to be a pair on the connector. on right i have dark green and light blue with black that also seem to be a pair in the 4 wire connector i have the crossover about 11 oclock or 90ish Hz. i maxed out remote bass knob and turned stereo up to 7/8 max volume or where ever it started to distort and backed off a bit. then started turning up gain until it distorted and backed off a bit it seems to work like this during songs on fm radio but during commercials it sometimes goes bonkers with massive distortion i cant seem to get both commercials, talking and music to sound good w/o any distortion. i usually leave factory head unit equalizer on rock since its the only good local station im too cheap right now to pay for XM radioespecially for 10 min daily drives. does the bass boost screw driver knob on Sub do same thing as remote bass boost knob? if so, should it be set to zero or about the same spot i normally set the bass boost remote? i found out the hard way if you accidentily unplug the remote , it must reverrt to enclosure setting which may have been maxed out cuz it immediately went full distortion.

For all those with the Boston, you will need to put plug the speaker in standard and not amplified as he just said to do. That's is incorrect. The amplified sound will be distorted and the sound is terrible. There is another video explain this. Trust me I had to learn the hard way with Geek Squad. Also get an amplified antenna as well because Reception after installation was terrible.

Can the kit use a pioneer 4201 nex radio?

Awesome video made my install easy. Next project will be the back up camera although I should’ve done it with the deck install while the deck was out...

So you don’t unplug the battery while working with radio in these camaros?

I installed the PAC Audio system with a DDX9703S, I have/had MyLink with Nav. I followed your video and merged the blue wires from the Pac system/antenna, with the blue from the Kenwood and both red wires. The issue is the HU will not shut off with the key, could you tell me where I might have gone wrong. Thank you

Great video. You guys have made my install super easy. Thanks. Question. 1. Why do I need to replace the factory AUX and USB cables and run the cables that come with the kit? 2. Where do the cables plug into under the dash or do they plug into my new AVIC-8200?

Is there no way to run the usb and aux wires more discreetly? Just on the side of the seat? Exposed?!?!

Yeah, Im happy with my plug and play, Andriod system. This seems like a lot of work.

First rate work guys as usual. That kit does look excellent. Keep up the great job. Awesome video.

What’s the name of the new kit that has a bigger face for a touchscreen? I broke mine from the terminal. I need to order a new one. Where can I find one?

Does the heads up display still work after installing this kit

What goes into the XM audio on the module, I never saw you guys plug in anything there

I got some questions about this car. Is there a way I can contact you guys to get some answers?

Anybody get a "battery energy saver active" messege after this install?

Can I still use the factory mic for the phone with the kenwood deck or would I have to install another one ?

Wouldn't it just be easier to pull the shifter?

I need a place in California I can go for this

What is the name of that stereo?

i added one didnt have to get the kit

Thank you! installation done in my car....no problem, everything is working!

Hello guys! Great video!! I got everything going but didn’t know where to plug the new aux plug plug in, the only other spot on my aftermarket stereo (jvc kwv140bt) it says mic and that is taken already! Maybe one of the red or yellow plug spots I can plug the Aux plug in? Thanks

Where are you located? Can u do my car?

I think your videos are a real life saver and time saver. I would like you to spend more time explaining the amplified antenna. Other wise I think the video is great. You could also touch on why a lot of people that install this kit with an after market radio have bad reception.

Any kit available for 2016 camaro. Great vid as always

Not sure if you still read comments from your older videos.. But I finally did this install. The radio works fine, and everything functions perfectly fine. But my issues are with the PAC kit! I got the PAC kit with a Pioneer AVH-2300-NEX, but for me, the PAC face bezel doesn't fit. It's like half an inch short from reaching the top clips. Plus when I open the face of the radio, I feel like the opening square to the PAC is not large enough to accommodate this. And my "air circulation" and "rear defroster" buttons don't work. Any ideas?? If I brought my car in, how much would you charge to try to fix it? I tried calling PAC, but I don't think they would be able to help me! Unless they released a version that has a bigger opening and was taller to fit this radio. At this point, I'm thinking I would have to cut the top off and extend it half an inch to get it to fit. As far as the buttons, I might try to take that piece off again and reinstall it, and cross my fingers.. 🤞🤞🤞🙏🙏🙏 Otherwise I might have to go with a different kit, but I would like to keep the "rotory knobs.." 🤷‍♂️🤷‍♂️🤷‍♂️

I have just installed one of these systems inside a 2012 Camaro with a JVC double din it seems like I'm having an issue where the whole system is cutting off and then cutting back on I don't know if it's the pack unit itself if there's a shortage in the Pack Unit or the wiring of the pack or it's doubled in how would I find out or do any kind of search cuz he'll come the radio come right back on

Hi.. Thanks for a great video. I've watched over and over again hoping that I can install my Kenwood DNX 574s radio to PAC RPK5-GM4101 that will be install to 2010 Camaro SS. However, I am still confused with some of the wiring since the video is about Sony radio. Please help!! Questions that I have relates to Kenwood wires (1) blue solid label "ANT CONT" where would this wire hook up to PAC? 2) Blue with white stripe label "P CONT" , is this wire connect to PAC blue and white stripe wire or cap? 3) PAC pink wire, would I need to cap this since Kenwood do not have pink wire? and 4) Kenwood has light blue with yellow stripe, where would I connect this wire to PAC? Thanks for your expertise.

If you have an older cd player, like a Pioneer Premier Dex-P9 or Pioneer ODR RS-D2, is the installation any different because I assume the radio doesn't have the input for the steering wheel controls. Would there be an changes to the wiring or do you just plug everything in except for the input of the stereo? Awesome videos by the way!

you guys are awesome. this is by far the most intense radio swap I've ever done lol

I know this video was made a while ago so I hope you guys still read this.. but I had this kit and a 9703s installed by pros, but I'd like to put in a HDMI cable and wifi dongle to be able to mirror with my s7... Would an amateur be able to do that without absolutely jacking it up? Haha thanks in advance!

How much cost the radio plus the connection???

Can someone help me with the red wire from the sony harness, do I connect it to the black wire or red accessories? I saw he only connected 2 blue wires to the red accessories.

Got the same kit. Only problem is when I turn on my key thiers no power on my ac knobs and after a while they will come on by themselves and stay at one speed only?

I installed a pioneer and I have no sound. No radio or music. Chime works but there is no sound. Help!

Why would anyone want this kit when the idatalink Maestro kit is so much nicer and an overall much cleaner look.

Did you say something about " programing the car? Do you need to hook up a laptop and do something to get the cars ecm to accept the stereo?

Hey thanks for the video! Definitely way better then the other guys 3 minute video making this look simple... I did this install yesterday using a pioneer Avh-4200nex. On a 2013 with my link. When it was all done everything functional except Sirius. I noticed the factory Sirius antenna won't fit the back of the pioneer. Do I need a separate antenna adapter or something? Also in the end the face plate wouldn't flip out, I think the bottom was catching on the new bezel. I'm gonna pull it out and try and adjust it. But it was really hard getting all this wiring back into the dash. Any pointers that might help???

hey guys good work. I'm curious I've never paid for a professional install. I've always done my own work. how much did the guy pay for this install. if it is not to much info. thanks

Please help. Behind the stock unit are 2 seperate cables. Which 1 is for the radio fm antena?

I'm not good at installation, can anyone recommend a shop in Atlanta with EXPERIENCE installing Camaros

What do you do with the blue wires (harness and antenna) with a head unit that actually has a working blue wire such as the DDX9705S?

He guys This a really good video. Just got one question about the whole thing. What happen to the car settings that are in the original radio? Where do they go? Greetings Roger

hi great video, thanks but i'm having problems with the ac it only stays on when is on hi but it shuts down when i lower it , when i rotate the dial to the left it shuts down, i heard there's a firmware fix, will it fix this issue? thanks in advance.

Does this keep the factory controls for vehicle options that's fine through the head unit?

Whats the correct after market radio size for this din for a perfect fit wasnt thinking that 7 inch would not fit in 7 inch din

More than a Great job guys , I need to do it ...i will follow you

If my camaro radio is locked can will it work if i put a new stereo or will is still be locked

Exselent brother,s good información for mi camaro 2011

Year Camaro ? ?

Yeeessss you guys are the best !!!!!!!!!

Nice video, a lot of work.:)

The wire on the antenna in my kit is red instead of blue, does that matter?

How do i connect the parking break wire I need help asap plz

My only issue with the kit. Is how far back the radio sits

Do you guys have a recommendation on a installer in Southern California

I have a 2015 Camaro every time I hit my brakes turn on the windshield wipers are just going down the road my radio goes off I need a pap how can I fix it

Enjoy your videos Good information Thanks

Hi five star car stereo, does the monitor on the rear view mirror still work when you go in reverse?

Will the center speaker on dash still operate?

Is this unit ave the capacity to add a second front camaro ?

Can I come work with you guys? I love car audio.

Fantastic video! Thank you!!!!

Damn yall are top notch!

What’s the name of the set to itself?

Is it possible to install a double din in a 2016 Dodge Challenger? Please make a video on if possible

You guys are good I have no business watching these any more and I'm still watching you guys lol

Another great one guys! Fernando's trying to take over LOL, nice collaboration

Thank you to you guys for the awesome detailed instruction for hooking up my Kenwood deck to my 2010 Camaro. Without your help I probably would not have attempted doing this myself. Wondering if you have ever done unboxing of the Kenwood DNA 890hd? Thx again Rob from Canada

Hey guys that's a great video. Thank you for all your great work. I was wondering if the Pioneer 8201 Avis would fit that PAC radio kit?

Hey guys, I was hoping you could help answer a couple questions regarding this install. I’m installing a pioneer AVH-W4400NEX in my camaro with this kit. I’m having two issues one being when I press the OnStar button or hold down the talk steering wheel control button it kills power to the radio completely. Should I cut the Brown loop wire and connect it to the yellow wire with a black stripes on the pioneer harness which is the mute wire? I know you guys are busy but it would be a really big help. Thank you guys for your time and keep up the good work

Great video guys, thank you! Im installing the 8200NEX, when is the pink wire needed, it looks like the the 8200 manual it says to connect? Do I need to do anything with the brown wire in with the 8200 or leave it looped? It looks like you just cut the connects on the HVAC harness, would you recommend the same for the speaker wire if using aftermarket speakers and amp or just tape them off. Did you have to do any steering wheel control settings? Finally, i've seen a lot of guys remove the center speaker, they say it makes the system sound better,they connect the mic/chime/gps antenna there, what's your thoughts? Thanks again!

Here is a question on the 5th gen camaro once you install a after market dash kit on these things the stock alarm becomes useless, you have to be like 10 feet away for it to work. Is thier any way to address this problem? Btw mine is a 15 that had mylink, and now how a schose kit with a 8200. Ps I used the vw style antenna adapter. Also is there an adapter to retain the stock USB?.... had to repost this here since you didn't answer on Facebook 😂

That's a nice looking kit than what was previously available. I don't get why Alpine didn't do a restyle kit for the 5th gen Camaro. They made a faceplate kit but it didn't look factory at all.

Perfection as always guys!! You guys are true wizards! I'd love to visit when i am in the US

Thank you! Finally a Camaro set up! I'm gonna show my car stereo installer this video so they knows what's up.

where did Fernando get that shirt?....its kool.

Very entertaining doing my lunch earlier today thanks guys

Poor Fernando can't reach the brake pedal. 😞

Will the Kenwood Excelon DDX392 deck work with this Dash Kit ?

So, My wife's 2014 Camaro was suffering from the issue that so many Camaro owners complaint about, issues with the battery, the lights flickering, sound on and off, inside lights issue, etc. GM should have a recall on this but they don't... any ways... the best way to fix this is to replace the head unit. I took advantage of this kit to fix her car at the same time adding a nice sound system to her car. Just performed the task last weekend... took me a couple of days... but this kit made me look like an expert. Easy to follow and with this video serving as a tutorial also helped me a lot. Thank you for creating this video.

Thank you 🙏 this helped a lot

same process for 2013 camaro rs?

Brilliant work guys thank you keep it going

What radio size is the radio

Any1 find a cheaper kit other than the pac dash kit

Great video

My vehicle is the 2012 2LT with a factory HUD, and I happen to have the factory backup camera that routes into the rearview mirror. Does that wire you mentioned earlier also pipe the video to the head unit? I was also curious if this still sends playback information to the HUD. Thanks! This is a wonderful video making me a fan of the PAC kit.

like 👍👌

On the SWC, I don't have the 3.5 mm plug on the back of the stereo, what do I do with the blue wire? I have the soundstream 63 stereo.