The Top 4 Festool Domino Joints You Need to Know

Подписаться 28 тыс.

Просмотров 150 тыс.

50% 1

In this video Sedge walks us through the top four joints we need to know, so we can tackle a ton of work in the shop and around the home.
The four joints include:
1. Miter (mitre) 00:33
2. Bevel Joint 04:00
3. Butt Joint 08:55
4. Board in the middle 12:15
Domino Joiner info: amzn.to/3Z6Hg3x
Affiliate for :
TSO Products : tsoproducts.co...
Kaizen Source : www.avantlink....
Taylor ToolWorks : lddy.no/1eoy5
Forged3d : forg3d.store/s...
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
#Festool #Domino #joinery
Chris’s AV Gear
Panasonic 4K Ultra HD: amzn.to/3pXXPzX
Rode VideoMic GO : amzn.to/3vXOJqx
Sony MDR7506 Headphones: amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card: amzn.to/3i0iT4u
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team.
Chris "cameraman" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.
Website: www.sedgetool....
--------
Instagram: www.instagram....
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com...

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 223

@davig80 2 года назад

This is probably my most favorite domino video - I keep coming back to it. Especially today when I'm starting a project needing a butt-joint and a join-in-the-middle. I was getting turned around! This video set me right!

@sedgetool 2 года назад

Awesome! Thank you David !!!!

@FiddlerOnTheRoof2024 7 месяцев назад

Father and Son! Love you guys. Keep working together and cherish the time together. Good information about the domino.

@sedgetool 7 месяцев назад

We will!

@Quietvibes07 11 месяцев назад

Sedge you are a national treasure. Thank you for all of the time you put in sharing your experiences and knowledge!

@sedgetool 11 месяцев назад

WOW … Thanks 🙏

@SirLesMeyer 2 года назад

Hi Sedge, I have had the OF1400 and Domino DF500 for 14 years. I still learn from you about these 2 very handy power tools. Thank you so much. Les in Australia.

@sedgetool 2 года назад

Great to hear! Thanks Les !!!!

@clintblay 2 года назад

Thanks Sedge. I’ve gotten a lot more confident with the domino with your helpful videos.

@sedgetool 2 года назад

Great to hear!

@fbenkautz2662 2 года назад

If all craftsman loved their work as much as you do, this world would be a much more enjoyable place and more work would get done.

@sedgetool 2 года назад

Thank you very much !!!!!

@donaldhealer9954 2 года назад

Glad I watched this tutorial. it saved me so much time... compared to what I was planning to do.

@sedgetool 2 года назад

Glad it helped!

@brandonknott3631 Год назад

One of the best domino videos i’ve seen. Love the pace and delivery and adherence to easy to understand rules.

@sedgetool Год назад

Wow, thanks Brandon !!!!

@martynclark2915 2 года назад

Hi Sedge. I have bought a Domino a few weeks ago. What a great video this is. Thank you. Martyn (UK) I am going to watch it again now

@sedgetool 2 года назад

Glad it was helpful! Thanks for watching Martyn ....

@HR4NT Год назад

Excellent demo!!! I needed this info!!! Thank you. You saved me a ton of aggravation!

@sedgetool Год назад

Glad it was helpful!

@kellychurchill808 6 месяцев назад

Great Video. This one and Domino in the middle really helped me to practice on a small project (sand paper storage - one for sheets, one for discs) before I move on to large rolling tool storage tower (24" wide x 23 1/2" deep x 67" tall). I will also use the domino for the drawers. Thanks again for the great information and a very understandable approach.

@sedgetool 6 месяцев назад

Glad it helped!

@nafnaf0 7 месяцев назад

This is super helpful. Must watch for any Domino owner

@sedgetool 7 месяцев назад

Glad it was helpful!

@tombierd9869 10 месяцев назад

Thanks for this video. Straightforward, but also REALLY helpful!

@sedgetool 10 месяцев назад

Glad it was helpful!

@OmarAhmad-gm1uc Месяц назад

Sedge is a wonderful teacher

@sedgetool Месяц назад

Wicked...Thank You !!!

@stuff2makestuff Год назад

Great video. I'm going to try this out now. It was nice meeting you fellas at WBC! Thanks

@sedgetool Год назад

Thanks !!!

@willhoffman6906 7 месяцев назад

Can’t Thank you enough Sedge for your Domino 500 videos 👍 just got mine and would be Totally lost without your instruction on how to use it 👍

@sedgetool 7 месяцев назад

Glad to help

@matthewwysocki5019 Год назад

Great (easy to understand and follow) tutorial. Thanks

@sedgetool Год назад

Glad it was helpful!

@AngieWilliamsDesigns 2 года назад

This is super helpful. I’ve often messed up my shelf joint by referencing off the wrong part. I still get a great joint. I have just messed up where it’s placed.

@sedgetool 2 года назад

Glad it was helpful!

@GuitarNTabs Год назад

Thanks for this EXCELLENT video, I now know what I need, to start my woodworking project at school! One thing, though, that seems off to me, and this might be me, so I wanted to hear it from you. It's about the shelf in the middle joint, to me it doesn't really look like the shelf is in the center? It looks more to one side, than the other? Thanks, I hope you can clear this up for me. Keep up the great work doing these videos! Cheers.

@sedgetool Год назад

it does line up to the top line...may not be exactly in the center ...I did not intend for it to be exactly in the center of the side...if this is what your asking......

@GuitarNTabs Год назад

@@sedgetool - Thank you so much for replying to my comment, it means a lot. The work you're putting into all these videos are much appreciated! Aha, that makes sense, thank you. So If I then wish to have that shelf, etc. exactly in the middle I would just have to measure out for that, correct? Another question, in regards to my upcoming woodworking project, if you don't mind... I want to assemble my piece of furniture with dominos, and that's what you've shown in this video as well, but what if all my sides are beveled at 45 degrees, so that I don't have a flat/square edge to rest the dominos' flap against? How would I position the dominos then? All I can think about is the good old manual way = measuring them out, and having to be dead exact, for the alignment, but this could easily go south, especially when I want it all to come together flush and nice, right? What's your take on this, if you don't mind. Once again, thank you for your time and expertise, it's greatly appreciated.

@mikeandlucky Год назад

Really appreciate your channel. You guys have a great instructional process. Thanks

@sedgetool Год назад

Our pleasure!

@abunator5146 Год назад

NOFX shirt and using quality tools....must be a good guy!

@sedgetool Год назад

You know it!

@thomlipiczky9021 2 года назад

I've been using the 500 Domino for maybe 10 years, but I always learn something from your videos. Plus you guys are like the Click and Clack of Woodworking!

@sedgetool 2 года назад

Thanks Thom

@GreenmanCarpentryJoinery-oz8yt Год назад

Very clear and understandable. Thank you.

@sedgetool Год назад

Thank You !!!!

@gianmariacazzaniga3874 2 года назад

Thanks for another great video. I'm learning a lot from you!

@sedgetool 2 года назад

Awesome, thank you!

@LaVozStudios 2 года назад

Great teacher. Great video. Thanks

@sedgetool 2 года назад

Thanks

@AZ-zr2gj Год назад

A2Z Hi thanks for the valuable info Sedge! What kind of vise and mount are you using in this video? I can see the mount is white and has Festool brand logo on it? Thanks

@sedgetool Год назад

The mount / vise I am using ids the Festool discontinued Vac Sys...vacuum clamp.

@danieldurkton2942 2 года назад

Great information. Love all your videos very informative. Thanks 😎

@sedgetool 2 года назад

Thanks for watching!

@spamcan2284 Год назад

The content was good but I liked this video because of your NOFX shirt, Big D.

@sedgetool Год назад

cool !!

@NorthSummitStudio 2 года назад

Awesome tips in this video, but even more awesome Nofx shirt !

@sedgetool 2 года назад

You rock!

@holubec37 2 года назад

I need this video playing on a loop in my shop. I screwed a simple shelf together last night because the DF500 ate my lunch. 🤣🤣

@sedgetool 2 года назад

Thanks for watching Kenny and I hope this video helped !!!!

@Lincolnstww 2 года назад

Great video sedge!

@sedgetool 2 года назад

Thanks!

@mattmayes599 2 года назад

Great informative video... Keep up the great work 👍🏻

@sedgetool 2 года назад

Thanks, will do!

@davidkelly1634 2 года назад

Thanks for the contents lads. Merry Christmas!

@sedgetool 2 года назад

Happy holidays!

@ianmyhre7879 Год назад

Hi Sedge. Thanks to you and all your videos about domino joinery i bought the DF 500👊😎 I would like to make a bookshelf with dominos side-by-side. Can you make a video where you show how to do this joint? 🙂 Saying hi from Norway!

@sedgetool Год назад

i don't understand...sorry

@ianmyhre7879 Год назад

Sorry for my bad English. I make another attempt to explain what I mean. I wonder how I use domino if I would have domino-joint on both sides on the same plate in the same height. It will look like this: +

@philrichardson6868 6 месяцев назад

Thanks for all the content you put out on the domino. Invaluable! Especially as I only purchased mine a few days ago! Quick question if I may - for the shelf joint, how do you align it when the stock is say 15mm thick? The distance of 10mm from the plate to the centre of the cutter means that the hole will be really close to the surface. How would you centre the hole in this scenario?

@sedgetool 6 месяцев назад

I would not use the base as my reference ... I would measure a 7.5 centerline...

@amjedalattas 2 года назад

Sedge, this is a great summary on the most common domino joints, if I don't have a df-700 and large legs or slabs I wanna join together can I get it done with df-500?

@sedgetool 2 года назад

Thanks.... For slab work you can do quite a bit with the DF500... The large legs and apron shirt connection definitely needs a DF700 .... Hope this makes sense

@ianharrison7646 2 года назад

Great videoSedge and big D really helpful💯💚💚👍👍👍

@sedgetool 2 года назад

Thanks Ian !!!!!!!!!

@-joe-674 Год назад

Thanks, Sedge. I can now make joints like Big D . Keep up the great videos.😃

@sedgetool Год назад

Right on!

@mountainlightwoodcraft Год назад

Love the content, Sedge, but please get a better mic system. The humming and buzzing are tough to deal with. For a budget, a pair of Rode wireless mics would make a world of difference.

@sedgetool Год назад

Thanks Michael...we have updated our mic system....

@vincentramos7679 Год назад

I don't have a domino yet but this was interesting to watch. Once I purchase one, I will make my way back to this video. If you wanted a third domino in the middle, how would you go about doing that?

@sedgetool Год назад

Make a Mark and use the loose setting

@ksphoto1 9 месяцев назад

Absoluting love watching these videos so much so that your videos are my reference library when I get stuck or forget a step. BUT, got this about putting in a shelf using the Domino. Now how about putting a 1 1/2 x3/4 x36 inch inch board T ing off a 2 inch board at the mid way point of the 2 inch board and the top of each must match up? The reference flaps won't work. Likely I am over thinking this but figured I'd ask.

@sedgetool 9 месяцев назад

use reference marks

@SteveVanEerden 7 месяцев назад

Great video. Thanks. What kind of clamping system do you have?

@sedgetool 7 месяцев назад

Bessey K Body

@jimbowls100 2 года назад

Great videos keep them coming guys, quick question, can you use 4mm dominos on 1/2” stock with a bevel mitre, I keep getting blowout ?

@sedgetool 2 года назад

nope....needs to be at least 5/8 to bevel

@andyh8239 Год назад

Is that a suction cup your using to hold your material? Does it have a vacuum cavity to prolong the bleed down?

@sedgetool Год назад

yes and yes

@scottmacgarvey6733 Год назад

I enjoy your videos. I have a question if you have time to respond. I use a Domino 500 when doing table top set ups. I never seem to get that seamless perfectly flat top. I make sure the plate is perfectly flat. I push in by the power cord. I apply pressure on the front handle. What the h-? Ultimately a lot of sanding when I take it out of the clamps. I just love sanding…….said no woodworker ever! Thanks.

@sedgetool Год назад

Scott...so sorry for the late delay... a few things to consider....sounds like your technique is sound. Possibly slight crown in wood ?? or maybe not working above the plane of the workbench or of of the workbench....Possibly some fence drift ???

@scottmacgarvey6733 Год назад

Thanks for the reply. Definitely working above the plane. I clamp the board to the workbench to keep it from moving on me. I probably need to go a little slower and more deliberate.

@str8chevys913 6 месяцев назад

Great video guys, one question at 10:25 what depth is the Domino set at for both boards. Thank you.

@sedgetool 6 месяцев назад

15mm depth... hope this helps

@korruptgaming1370 Год назад

Do you have a video of a 700 working with 18mm ply?

@sedgetool Год назад

Nope

@Cisco8484 2 года назад

Got some hum in the audio. But you probably know that already. Great video. Thanks guys.

@sedgetool 2 года назад

Awesome, thank you!

@davidsmith3334 2 года назад

Hi thanks for a great tutorial, I was wondering if you have ever used a domiplate and if you have what did you think of it. Regards David

@sedgetool 2 года назад

I have never found a need for it ...never used it !!

@automaticprojects Год назад

Love these videos. Question - now that Festool no longer sells the vacuum clamp system - at least in North America? - what do you recommend for getting work off the table?

@sedgetool Год назад

if it is a large piece...hang it and clamp it off the table...if it is a small piece build it up on top of another piece....

@DieWolf57 2 года назад

Hello! For middle shelves your ideas will only work if You are dealing with 20 mm plates - otherwise You will be badly off-centered as the reference for the Domino is NOT the bottom which is fixed at 10 mm - any good ideas how to deal with 25 mm boards are welccome

@sedgetool 2 года назад

ok ... after some thought ...you could use this method if you shim the base of the DF500 domino with a 2.5 mm shim..

@DieWolf57 2 года назад

@@sedgetool THX as there are 2 M5 threads at the bottom - I cut 2 plates of stainless steel 1.5 and 1 mm respectively and screwed them to the bottom - this should do the job for 25 mm and also work for 22 and 23 mm boards

@LaVozStudios 2 года назад

Bravo 👏🏽

@sedgetool 2 года назад

Thanks

@johnofferman Год назад

can you tell me what vise you used

@sedgetool Год назад

We are using the Festool Vac-Sys in the video..it has since been discontinued

@christopherbaker7223 2 года назад

What size dominos would you use for 18mm thick sheets of MDF doing butt joints and what depths do you go into the horizontal and vertical holes? Thanks

@sedgetool 2 года назад

5 x30 ....set plunge depth at 15mm

@ilanreich2284 2 года назад

Sedge thank you for the video helped me alot. I'm planning to build upper cabinet with 18mm plywood and thought to use the domino so there will be no seen screws. The box size is 80mm×75mm*30mm (H*W*D). My question is which size of domino to use and how many for each but joint?

@sedgetool 2 года назад

5x30 domino for plywood and a 30mm deep cabinet only needs two domino ...that is very narrow... if it is 30cm then I would use 3

@jeremya403 Год назад

What about a 45 degree (2x4) into the face of another 2x4? How would I go about marking and joining that? I'm using the df 500.

@sedgetool Год назад

measure and align off of centerpoint ... good idea for a video

@jeremya403 Год назад

@@sedgetool Looking forward to that video. I build custom furniture, and I'm trying to incorporate the dominio into my building process. Some joints can be tricky, to say the least/

@bartsons Год назад

what tool pouch is that on your belt`?

@sedgetool Год назад

www.leatherbydragonfly.com/shop/the-sedgeley-pouch

@Jan-py2ee 2 года назад

Hi Sedge. Thanks for your videos. How do I set up the Festool Domino if I want to connect a table leg that has been cut at an angle of 8 degrees to an upright that has been cut off at an angle of 90 degrees?

@sedgetool 2 года назад

wow .... great suggestion for a video ...stay tuned

@botopliff 2 года назад

Easy question: was that all 3/4 stock?

@sedgetool 2 года назад

yes .....actually 18mm

@creativedave 2 года назад

Do you think I could get away with using a Domino 500 for making a bed frame or a media center?

@sedgetool 2 года назад

Media center maybe..bed frame ..no....need the length of tenon for the bed frame ....

@creativedave 2 года назад

@@sedgetool You always put me on the right path. Thank you!

@joepennisi2080 2 года назад

I can’t get the vac system anymore they said. Why is festool doing away with it? Are they replacing it with a newer version? I wanted to buy it!

@sedgetool 2 года назад

I really do not know the complete answer to your inquiry...... I would call around to some of the larger on line dealers ... there still may be some hanging around for sale .....

@mim2046 2 года назад

Sedge, something I have never seen on any of yours or the Festool lives is, it’s one thing to have the four mitered corners using domino’s, but what if you have a bottom of a box and/or a back of a box that needs to be mitered into that? Is it physically possible to use dominoes in that situation? I.e. I have a hope chest to make, where I’m going to miter the four outside corners, but also miter the bottom into the four corners as well. Is that physically possible to use dominos in the bottom that connects to the sides?

@sedgetool 2 года назад

Interesting application....... I have never found myself needing to do this...... It seems to me that it would have to be glued up all simultaneously .all 5 pieces ...... even then I would not build it like this........I would use a rabbeted bottom or flush butt joint with a decorative profile or molding......... then add a base with legs....... I hope this makes sense

@mim2046 2 года назад

@@sedgetool that is exactly what I was thinking in regard to being simultaneous or ending up doing a rabbet joint at the bottom. I just wanted to confirm my thought process was correct in my thinking. Thanks again! 👍

@mim2046 2 года назад

@@sedgetool if I have a concept/idea for a new accessory for the Festool domino, who and how could I submit my idea to?

@robslifting4life 2 года назад

I see they made a garage door out of the Festool tracks

@sedgetool 2 года назад

lol

@VSannikov63 Год назад

Very useful video. Thanks a lot. But you missed one more type of joint - an angled button joint. I am interested how to connect angled shelf to the sides. Thanks in advance

@sedgetool Год назад

Noted

@ZARATHOUSTRAM 2 года назад

Good video. Where did you got this accent?

@sedgetool 2 года назад

Thanks....I grew up in Maine !!!

@ZARATHOUSTRAM 2 года назад

@@sedgetool Hello from Montréal! Your tuto are good and useful, thank you.

@davidness7523 2 года назад

What accent?

@MrLydo617 2 года назад

#4LAWS

@sedgetool 2 года назад

Cool !!!!

@adamchesis7443 2 года назад

all the joints you cut could be accomplished more accurately and for $800 less with a lamello. When doing a joint in the center of the panel you should never cut the shelf joints first, always cut the side first as even clamped it could move it when you push against it.

@sedgetool 2 года назад

Good For You..........Thanks for sharing !!!!!

@ralphturney2125 Год назад

It would have been nice if you’d have shown the “ tip” at the 16 min point. That would have saved me a bunch of frustration when you did the set up. I finally figured it out myself. Restarted the video AND THEN you show the “tip”. Let me give you a tip…stress that when you show the proper steps in the original set up. Tip…do not teach it wrong first, AND THEN give a so called tip on what you left out. Very frustrating.

@sedgetool Год назад

Thanks for sharing.......

@eisted 8 месяцев назад

this guy with the nofx shirt just has unbearable energy, shame the other guy is great, very informative

@sedgetool 8 месяцев назад

@leedumond 2 года назад

Please don’t talk while the machine is running, it’s impossible to hear what you are saying.

@sedgetool 2 года назад

@55mena 2 года назад

Bad sound

@sedgetool 2 года назад

Thanks

@charlesgoff6429 2 года назад

I appreciate your videos, they make it so I get to unlock the full capabilities of the tools. The demonstration on centering dominos in the middle of the board was great. Thank you

@sedgetool 2 года назад

Cool, thanks...Merry Christmas

@kjs8962 2 года назад

Thanks a lot for your video and tips 😊 I did my first project with the domino and used your tips. Everything worked well 😊. Saved me lots of time and material. Best regards from lovely Germany 😊

@sedgetool 2 года назад

Fantastic! Glad the videos helped !!!

@TeamProsperity Год назад

Why don’t you all EVER demonstrate with the 700XL???

@arthurgriffin1210 2 года назад

I became one of your subscribers recently. I'm from Mass originally. I moved to the South, KY and it's great to see and hear your humor and Bostonian accent ( and this t shirt here) as well as your thorough teaching abilities. I have to say you, Bents, and Tamar channels are some of my favorite, great teaching and no fluff content

@sedgetool 2 года назад

Welcome to the channel Arthur...I agree I like those other channels as well.... Thanks !!!!

@manuzach 2 года назад

Sedge I made my first domino project ! Made a 5 piece wooden tray with an elevated base out of chakte viga…that machine is amazing ! Can you give us some glue tips too ?

@sedgetool 2 года назад

Sounds great! Ok I will do video on glue up !!!

@allanwilliams679 2 года назад

Another winner Sedge. Great reminder of the important basics. Thank you again. Merry Christmas to you guys. 🎄

@sedgetool 2 года назад

Thanks Allan..Merry Christmas !!!

@johndeessnowchurch7634 Год назад

Greetings Sedge! I need a bit of help with the domino. Trying to make the 4th joint in this video. I am using the DF 700 EQ, whereas you are using the DF 500. At about 13:10 into the video, you talk about how the distance from the bottom of the plate to the midpoint of the cutter is 10 mm. That is not the distance on my 700, it's more like 15 mm. So when I cut the mortise for the dominos, it is around 5 mm off. Question one is: Is the distance from the bottom of the plate on the 700 actually different than that of the 500? Or am I missing something. I do have the cutting depth set as low as it can go at 10 mm. Question 2 is: If the distances are different, what is the methodology to accommodate the 5 mm difference? Thanks from another Purdue grad!

@sedgetool Год назад

the distance from the base to center of the DF700 is 15mm.......this video may help with the 2nd question.... ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XeIRe5F93-w.html

@johndeessnowchurch7634 Год назад

@@sedgetool Thanks much! Really appreciate your videos!

@deadlyfloof6311 2 года назад

Hands down the best practical domino video ive come across yet!

@sedgetool 2 года назад

Wow...Thank you very much !!!!

@brianquirion4177 Год назад

Great videos. How would you do board in the middle if you were working with say 15/32 ply? with a 4x20 domino? Thank you!

@sedgetool Год назад

if it is 12mm plywood I would bottom out the plate on domino to 6mm for shelf...for the side I would set up a fence ( Rail ) at a measurement from the scribed centerline 10mm back.....

@alekznial Год назад

When making those partitions in the middle how do you go about making the domino holes on a board that would go parallel to the one that’s horizontal? In other words instead of an upside down T a sideways H.

@sedgetool Год назад

Mark and measure

@sailrockpaperscissors8261 Год назад

great video , which would you reommenrd for makeing draws 45 with domino or but joints and domino's?

@sedgetool Год назад

butt joints with domino

@scottrennie6896 5 месяцев назад

I can't forgive them for not having 18mm. So much of what we work with is 18mm

@sedgetool 5 месяцев назад

@billymacmakes 2 года назад

Hey Sedge! I'm here from Jason's channel and I'm glad I stopped by! I love that last tip you shared for the middle shelf - I think I was one of those people over complicating it, because wow, that went together so well! I love it. New sub. 😎

@sedgetool 2 года назад

Awesome! Thanks for subscribing .... I learned this technique in 2008 and I was overthinking it prior .... Glad it helped !!!!!

@bammortgage Год назад

best "Mwwwoooortise"...... luv the East Coast accent. Good video boys!

@sedgetool Год назад

Thanks 👍

@robertburns3020 10 месяцев назад

Great video

@sedgetool 10 месяцев назад

Glad you enjoyed it

@allanwilliams679 Год назад

Hey Sedge. Just wanted to comment again. I originally made a comment a year ago when this video was uploaded. But I have watched it several times, including a few days ago when I was asked, by one of my family, to build an 8ft x 4ft Boot Rack with 20 various size cubbies. Videos like this are such a useful resource to serve as reminders for certain techniques. Thank you again and please keep up the good work. 🙏🏻

@sedgetool Год назад

Thanks Allan ... really means a lot that this video was helpful for ya !!!

@shaundeane 2 года назад

Thanks guys, this is really helpful. I was struggling with getting a butt joint right last night on some beautiful walnut and if my more knowledgeable buddy had not been there, I'd have screwed up a lot of work. It's so easy to reverse things. Really appreciate the advice and tips.

@sedgetool 2 года назад

glad it helped ....

@davidmeyer9204 Год назад

Just got my DF500, well will be delivered today. Going through your domino videos to get an upper hand on the best use of the machine. Thanks Sedge and Big D. Really appreciate it.

@sedgetool Год назад

Glad to help

@ruthtimpalmer715 2 года назад

Sedge, after watching your video on "Domino Joints" I was curious 1) Does a mid-shelf require mechanical fasteners in addition to Dominos? 2) In that same vain, should a fixed shelf, or top / bottom on a melamine cabinet have a minimal dado, say .125" to facilitate glue up?

@sedgetool 2 года назад

You can dado and use mechanical fasteners.... I use no glue and screws when building cabinets... I usually use prefinished ply so glue does not stick .... this video shows the process studio.ru-vid.comTILGZxhRdBQ/edit

@harrygadsden2449 2 года назад

Your videos are great! Very useful. Can you tell me what make / model the swivel clamp is in the video that you’re using to hold the workpieces?

@sedgetool 2 года назад

Festool Racheting clamps .....

@jonmolesworth7738 2 года назад

Love your videos, and the Boston shirts! But bummed…. You have me sold on the Vac system, but its not available anymore???

@sedgetool 2 года назад

Jon.......sorry about the discontinued Vac clamp....but ... I heard of a few folks that have called around to local Festool dealers and have been lucky to get some....

@simon-qy2xe 2 года назад

Festool should put that video on their Website because you explained it perfect

@sedgetool 2 года назад

Thanks Simon !!!

@tedrzz 2 года назад

Wow, just learned a lot of new info all from this video! Thanks Sedge!

@sedgetool 2 года назад

Thanks Ted !!!!!!

@jordanbell3473 2 года назад

Your content is top notch. The domino videos are the best on youtube.

@sedgetool 2 года назад

Thanks Jordan !!!!

@CisnerosShop 2 года назад

Sadge, love all the videos and the explanations you give. Question: when attaching a middle shelf anywhere on a center panel, is there a way to attach another panel on the opposite side but same location? Kind of like a through domino that holds the left shelf, going through the middle divider and into the right panel, but not using the “knock down system”? Thanks for your time

@sedgetool 2 года назад

Yes you can! on the center panel do a through mortise...... Use the setting for the side panels at a plunge depth of 25 ....use a 5x30 domino when gluing up from either side start in the center panel...this should allow for any discrepancies in tenon/ domino length ..... I should do a video on this ..... Thanks Victor ..hope this makes sense ....

@CisnerosShop 2 года назад

@@sedgetool it makes total sense. Hope to see a video on this in the future. Thanks

@CisnerosShop 2 года назад

@@sedgetool I’ll do a test sample and let you know how it goes and what I learn or what I can do better, might help you when you make the video

@moderntouchfurniture 2 года назад

Wow Sedge I totally forgot I could use my Domino for middle shelves, now I love this tool even more! You just made my next project so much easier. Another awesome video, thank you my friend.

@sedgetool 2 года назад

Glad I could help!