Тёмный

The Top 5 Things to Check When Your Heavy Equipment Vehicle Won't Start - CASE Backhoe Diagnosis 

Tekamo HD
Подписаться 103 тыс.
Просмотров 67 тыс.
50% 1

This video will teach you everything you need to know about diagnosing why your heavy equipment vehicle won't start. The heavy-duty mechanic will walk you through the process of troubleshooting a CASE backhoe and show you how to fix it. In the bonus round of the video, we’ve got a Volvo rock truck with the same problem. The rock truck is dead in the water and the vehicle won’t start.
What to check:
1) Night switch
2) Battery age/condition
3) Check the connections are tight/not corroded
4) Breaks in wires
5) Voltage drop
ALSO CHECK:
6) Batteries are properly hooked up!
Reach out to us here: www.tekamohd.com/join-the-tek...
Joining track links:
• Excavator Track Repair...
How to make battery cables:
• How To Make Battery Ca...
Series vs parallel battery circuits:
• Series Parallel Circui...
This is our more detailed video on the battery diagnosis:
• Heavy Equipment Vehicl...
🦺 SERVICE CALL
On-the-job troubleshooting and repair from a heavy-duty mechanic. We shadow heavy equipment technicians as they get called out to assist with machine breakdowns.
➡️ Remember to 👍Like / 💬Comment / 🔔Subscribe!
➡️ Need an HD mechanic? Book one at www.tekamohd.com/
➡️ Business Contact: media@tekamohd.com
⌚ TIMESTAMPS
00:00 Intro
00:15 Customer complaint
01:28 CHECK 1 - Check for battery condition/age
02:00 CHECK 2 - Night switch (make sure its off when working on batteries)
02:30 CHECK 3 - Connection tightness and corrosion
04:20 CHECK 4 - Breaks in wire
05:20 CHECK 5 - Checking the voltage drop
08:41 Cleaning the terminals
09:58 The joke is in your hands
10:15 Looking for more corrosion
12:04 Detour
15:01 Caution when working with cables
16:02 Confirming the fault
17:17 Corrosion!
19:26 Making replacement battery cables
20:08 Installing the new cable
20:45 Series vs Parallel
21:08 Hooking up batteries wrong
21:47 Random bits
23:55 Confirming the job is done right
25:00 Precaution when dropping implements
25:15 Rock truck diagnosis
26:10 Concluding the Service Call
---------------------------------------------------
🔨 HEAVY EQUIPMENT MECHANIC TOOLS 🔧
🧰 Milwaukee 2554-22 M12 FUEL Stubby 3/8 in. Impact Wrench Kit (2 Ah/4 Ah): amzn.to/3Dk0ecK 🛠️
🧰 Milwaukee 2767-20 1/2" High Torque Impact Wrench w/ 48-11-1850 5.0Ah Battery: amzn.to/3nkZUVr 🛠️
🧰 Milwaukee 2962-20 M18 18V Fuel 1/2" Mid-torque Impact Wrench with Friction Ring: amzn.to/328F5oh 🛠️
As associates, we earn from qualifying purchases. Please consider supporting the Tekamo channel and using our links in the description. We make a little from every sale, which goes towards producing more real content with real mechanics.
---------------------------------------------------
🌐 PARTNER SITES 🌐
FORTIS HD // Affordable tracks, tires, & parts shipped to your door.
www.fortishd.com/
RENT1 // Heavy equipment rentals for residential or commercial construction jobs.
CANADA: www.rent1.ca/
USA: www.rent1usa.com/
SMARTCAST EQUIPMENT // Used heavy equipment for sale.
www.smartcastequipment.com/
DRIP MARKETING // Digital marketing and media production
www.dripmarketing.co/
---------------------------------------------------
🦺 OPERATIONAL SAFETY 🦺
Always ensure you are wearing the proper personal protective equipment suited for your procedure such as steel toe boots, safety glasses, hard hats, gloves, overalls and any other equipment suited for your task at hand.
---------------------------------------------------
⚠️ DISCLAIMER ⚠️
Any information on heavy equipment operation available at this channel is intended for general guidance only and must never be considered a substitute for the advice provided by a qualified heavy equipment instructor. Any reliance you place on such information is strictly at your own risk. If you intend to operate heavy equipment, always ensure you meet the legal permitting requirements based on your geographic location.
Although TekamoHD takes all reasonable care to ensure that the contents of the RU-vid Channel are accurate and up-to-date, all information contained on it is provided ‘as is’. TekamoHD makes no warranties or representations of any kind concerning the accuracy or suitability of the information contained on this channel. To the extent permitted by mandatory law, TekamoHD shall not be liable for any direct, incidental, consequential, indirect, or punitive damages arising out of access to or use of any content available on this channel, regardless of the accuracy or completeness of any such content.
TekamoHD disclaims any control over, relationship with, or endorsement of views expressed by other RU-vid users. All user comments are from members of the public and do not necessarily reflect the views of TekamoHD. TekamoHD may at any time and at its sole discretion change or replace the information available on this channel.

Опубликовано:

 

20 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 96   
@TekamoHD
@TekamoHD Год назад
SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD
@sasquatchrosefarts
@sasquatchrosefarts 10 месяцев назад
There is so much dirt on the batteries and even the wire housing down to the connection..... that morning condensation can create a strong parasitic short. This is stunning to me..... I don't know how you tie your shoes. A pile of wet mud on the battery and connections, and it may run on the entire conduit to the alternator or other connection. Wet mud all over it. You're a clown.
@keithmckay3454
@keithmckay3454 2 года назад
Sometimes when a contractor has to leave his equipment on the street they will wire in a switch in the start wire to keep some dummy walking home from the bar with a Case key in his pocket from driving it away.
@naungthanttun6726
@naungthanttun6726 Год назад
Love to see hard working heavy duty mechanic fixing screw up machines. Please keep on posting new video buddy.
@joepavlis1975
@joepavlis1975 2 года назад
As a HVAC/R field mechanic for over 35 years [now retired], I can relate to all this. The service truck, tools, equipment, parts, driving, all hours of day/night and of course working outdoors in all 4 seasons [lower mainland rain]. No complaints though, every day a new location, adventure and challenge.
@TekamoHD
@TekamoHD 2 года назад
Thanks for watching, Joe! We all hope you're enjoying your retirement. If you have any cool stories that you think would inspire the next generation, shoot us an email.
@realberla2518
@realberla2518 10 месяцев назад
I hope Cam knows he is inspiring a generation of tradesmen
@steamboat1341
@steamboat1341 Год назад
Thank you for your explanation of your trouble shooting technique, keep sharing your knowledge greatly appreciate it.
@TekamoHD
@TekamoHD Год назад
Thanks for watching and supporting the channel!
@Ess-mt9jt
@Ess-mt9jt 2 года назад
love the videos i’m going into my first year of heavy mechanical foundations and these videos teach me a lot cant wait to get started in the industry thanks guys
@TekamoHD
@TekamoHD 2 года назад
How's your first year going?
@Ess-mt9jt
@Ess-mt9jt 2 года назад
@@TekamoHD great thanks hard working but having a lot of fun
@nickmaiorana5057
@nickmaiorana5057 2 года назад
I totally agree. I would have done this all in the same setup. Glad to see you guys again, keep posting more great content stay safe and warm out there.
@TekamoHD
@TekamoHD 2 года назад
Thanks Nick for always commenting. Tons more content coming out. Editing 'em as fast as we can.
@ronniejohnson3781
@ronniejohnson3781 2 года назад
Very informative vid! Exactly how I diag charging issues, start with connections, test batteries, wiggle tests! Keep up the great content and STAY SAFE OUT THERE
@TekamoHD
@TekamoHD 2 года назад
Thanks man! Stay safe out there to you as well. How long you been wrenching?
@ronniejohnson3781
@ronniejohnson3781 2 года назад
@@TekamoHD always brother! Going on my first year with heavy equipment have been wrenching on cars,trucks, atvs, small engines all my life
@TekamoHD
@TekamoHD 2 года назад
@@ronniejohnson3781 right on man, you'll love heavy equipment. Are you independent or are you working for someone?
@ronniejohnson3781
@ronniejohnson3781 2 года назад
@@TekamoHD currently working for a mid size earth moving company but highly considering going independent after i get some more experience with different makes/models of equipment
@EGoodson33
@EGoodson33 2 года назад
Second year Deere tech, would love to see a “big picture” type video. Getting out to machine and up selling, finding things that need fixing, basically doing a full inspection of a machine and the best way to go about finding all the little things that may need fixing or preventative maintenance before starting a repair!
@TekamoHD
@TekamoHD 2 года назад
Hey Evan! The next opportunity we get we'll film this for sure. Anything else you'd like to see?
@EGoodson33
@EGoodson33 2 года назад
@@TekamoHD whenever something comes up that I struggle with or go over my efficiency on I’ll let y’all know😂
@erichill5208
@erichill5208 Год назад
At one time I was the shop Forman for a refuse collection company. One of the guys was struggling to figure out why a small engine that ran a vacuum pump on a porta potty service truck would not crank. Battery tested good starter tested good he just did not understand he had cleaned all connections. Came down to a really corroded cable. I graded a razor knife cut the insulation for about 6 inches and yes it was growing green Electrical killer. Replaced that 4 gauge battery cable that was 4 feet long and it cranked like new. Another time on an excavator that was having battery problems. I found a cable end lug that had been over tightened and cracked broken and was not clamping tight. Replaced that cable end and problem fixed
@CoreytheMechanic
@CoreytheMechanic Год назад
I really hope this channel gains traction keep up the good work boys.
@Sean-bp6xb
@Sean-bp6xb 2 года назад
Thanks for another informative video. Appreciate it. Love your humour. From Hamilton Ontario.
@EATSLEEPFARM
@EATSLEEPFARM 2 года назад
Great video guys👍
@TekamoHD
@TekamoHD 2 года назад
Thanks man. Appreciate you in the comments as always.
@EATSLEEPFARM
@EATSLEEPFARM 2 года назад
@@TekamoHD Hey thank you guys for the great content!! This channel is gonna get big.Just make sure Cam doesn’t get all Hollywood on us😎
@chadrides914
@chadrides914 2 года назад
Got the First comment. Gonna watch the video tonight 🙌
@JohnDoe-yq3mf
@JohnDoe-yq3mf 2 года назад
Now that's just greedy 😉😄
@chadrides914
@chadrides914 2 года назад
@@JohnDoe-yq3mf I’ll share the first comment with you.
@TekamoHD
@TekamoHD 2 года назад
@@chadrides914 lol funny man
@koalafied123
@koalafied123 Год назад
Really good video! Thank you!
@TekamoHD
@TekamoHD Год назад
Glad you liked it!
@pbsgarage3486
@pbsgarage3486 2 года назад
Another great video guys.
@TekamoHD
@TekamoHD 2 года назад
Thanks! Glad you enjoyed
@maxservice567
@maxservice567 Месяц назад
Keep it coming from Phill and Sarah Parnham 😊
@MuscadineMarlon
@MuscadineMarlon 2 года назад
i love these videos. nice edits.
@TekamoHD
@TekamoHD 2 года назад
Thanks Marlon. Glad you like the edits!
@heavymachinery2843
@heavymachinery2843 2 года назад
Realy enjoy your Videos pleas more equipment repair
@TekamoHD
@TekamoHD 2 года назад
Thanks man. We got tons of footage just gotta get them edited.
@Terry_Baker
@Terry_Baker 2 года назад
Been waiting for Cam to make a Ave quote again . Need a Tekamo decal for my tool box...
@BluTechEquipment
@BluTechEquipment 2 года назад
What about a BluTech decal! Hahaha
@Terry_Baker
@Terry_Baker 2 года назад
@@BluTechEquipment would be awesome Cam!
@TekamoHD
@TekamoHD 2 года назад
Hey Terry, what area you in? Send us an email at media@tekamohd.com about the decals
@Terry_Baker
@Terry_Baker 2 года назад
@@TekamoHD Myrtle Beach, SC..email sent
@TekamoHD
@TekamoHD 2 года назад
@@Terry_Baker Ok awesome
@starshineyacht7293
@starshineyacht7293 Год назад
I love this guy
@rodolforamirez2502
@rodolforamirez2502 Год назад
Good job
@TekamoHD
@TekamoHD Год назад
thank you
@brandone6252
@brandone6252 2 года назад
Love your videos been a heavy equipment mechanic an welder for 10 years my dads been doing it for 35 40 years has his own company he the only mechanic
@TekamoHD
@TekamoHD 2 года назад
Right on man. Where are you and your dad wrenching?
@brandone6252
@brandone6252 2 года назад
I am working in Chesapeake va an he is working on the Chesapeake bay bridge tunnels he’s there main hydraulic guy for all the cranes but I live in North Carolina
@brandone6252
@brandone6252 2 года назад
@@TekamoHD funny loader just came in on low boy with a no start
@TekamoHD
@TekamoHD 2 года назад
@@brandone6252 That's awesome man. What trucks y'all running?
@brandone6252
@brandone6252 2 года назад
Mack for low boy
@whereisthecookie4065
@whereisthecookie4065 2 года назад
Awesome
@TekamoHD
@TekamoHD 2 года назад
Thanks man
@ooelectronoo
@ooelectronoo Год назад
You can snap the lug loose from the plastic case. It is only secured by the case. Other than that it is lead underneath.
@johnmastroianni1805
@johnmastroianni1805 Год назад
What kind of battery load device would you recommend for heavy equipment?
@blake6536
@blake6536 2 года назад
Another great vid 👍
@TekamoHD
@TekamoHD 2 года назад
Yo thanks Blake that means a lot
@codyharris9472
@codyharris9472 5 месяцев назад
Is this same set up for a Fermac 760 terex backhoe
@thedailylogger1045
@thedailylogger1045 2 года назад
So the arcing at 1:24 - was that a special effect you added in or for real? It seems like you were looking right at it, I watched it a couple of times to see if I was making it up.... good video, thanks for posting it. Appreciate the real world perspective. Don't bother bleeping out the occasional descriptive language, we're not petunias out here!
@user-bp3we5tz1o
@user-bp3we5tz1o 4 месяца назад
There must be current flow, its a positive on positive test or negative to negative test to make it easier.
@cmpremlap
@cmpremlap 8 месяцев назад
13:00 Agreed….if you’ve never used a tool for a purpose other than what it is designed for, are you really a mechanic? I love tools as much as the next guy but it is a talent to get by with minimal tools but mostly luck 🍀
@cmpremlap
@cmpremlap 8 месяцев назад
16:22 exactly, never bank everything on the customer’s complaint😂
@branchthedude9723
@branchthedude9723 4 месяца назад
The fuckin snap on multimeter eats battery’s like Godamn Cookie Monster that test light is badass I use it every day
@mikemuzzell5167
@mikemuzzell5167 2 года назад
Number 11 liked baby. Wtf. Where’s all the salt and seasoning. That’s a piece of west equipment for sure. That’s Ontario new. Lol. Jk pls stop sending your unwanted west equipment to me , management!. It was in the scrap line up for a reason. If the boys out west don’t want it! We don’t want it. Rant over. Great vid.
@TekamoHD
@TekamoHD 2 года назад
Hahaha thanks Mike
@jamesworles8997
@jamesworles8997 Год назад
Why do you call it a night switch??? We call it a master switch. Troutman NC
@oldschoolhomesteadfarm2683
@oldschoolhomesteadfarm2683 2 месяца назад
Just use jumper cables straight to starter leave battery bungee in cab.
@marcbc8789
@marcbc8789 2 года назад
Subtitels spanish!! Thankss
@TekamoHD
@TekamoHD 2 года назад
Yeah we can look into that
@shedcraft700
@shedcraft700 2 года назад
Sick of losing lights lol. I have that same green one
@TekamoHD
@TekamoHD 2 года назад
Have you tried any other lights you like? You're an apprentice eh. Where you wrenching?
@shedcraft700
@shedcraft700 2 года назад
@@TekamoHD Yep and I think I need a good old trouble light haha. I'm an apprentice up in Northern-ish Alberta
@BluTechEquipment
@BluTechEquipment 2 года назад
@@shedcraft700 Something nice about the warm glow from an old school caged trouble light. Especially when it's -25°C plus wind chill.
@shedcraft700
@shedcraft700 2 года назад
@@BluTechEquipment Yep it sure makes for a warmer feeling than a white LED
@opuntina
@opuntina 7 месяцев назад
I had an early 2000's chevy kodiak 6.6 that would start fine until ambient temps outside hit 49 (f) degrees or lower. anything below 50 it would not start. flat dead, no nothing on the dash. I could jump the solenoid with a screwdriver and she'd fire right up, and then be good to go for the rest of the day, but every morning I'd have to jump it with a screwdriver. If we plugged in the block heater this didn't happen. Never did figure this one out. me or the shop we'd sometimes use for bigger problems. These were plow trucks with gnarly electrical abuse.
@Dcalvert92
@Dcalvert92 4 дня назад
Check for key off parasitic drain anytime you have dead batteries. Takes 5mins
@oldschoolhomesteadfarm2683
@oldschoolhomesteadfarm2683 2 месяца назад
Battery manufacturers melt the date's on the sides. You can learn to read the codes. Most times electrical issues are the grounds not clean. That's what Dielectric grease is for. Old school checking put a wrench across the terminals. 😂
@Scumiest
@Scumiest 11 месяцев назад
You know what rhymes with cam?… Dad. Be my dad. Please.
@ed0c
@ed0c 2 месяца назад
wd40 makes a good electronics spray. also CorrosionX
@mechanic_jeng1997
@mechanic_jeng1997 Год назад
Ify
@keithyoung7381
@keithyoung7381 Год назад
This seems more like a no crank condition
@garyradtke3252
@garyradtke3252 5 месяцев назад
I figure that I paid for my tools so i can use them for anything I want.
@billnelson7254
@billnelson7254 2 года назад
Cam, do the manufacturers, as a rule, date the batteries? I mean, do they identify the installation date... NOT do the manufacturers take the batteries out for dinner and drinks!!!
@typgamer
@typgamer 2 года назад
There will always be a date (Week Nr./Year) when the batterie was manufactured, installation stickers are only put on by the technicans.
@tahoetom9932
@tahoetom9932 5 месяцев назад
So he has 50,000 dollars in tools but can’t afford a new front tooth! Something’s wrong here! Don’t all Canadians have free dental?
@Number18ster
@Number18ster 2 месяца назад
Definitely not free in Alberta.
@brodyllc
@brodyllc 9 месяцев назад
this hill billy is terrible
Далее
КРЫЛЬЯ - ЗЕНИТ: все голы
01:00
Просмотров 94 тыс.
How To Diagnose a Tractor or Backhoe That Wont Start
7:59
Heavy Equipment Mechanic Toolbox Tour
20:10
Просмотров 17 тыс.
КРЫЛЬЯ - ЗЕНИТ: все голы
01:00
Просмотров 94 тыс.