The truth about injector return line kits for 6.9 7.3 idi diesel trucks

Подписаться 8 тыс.

Просмотров 17 тыс.

50% 1

In this video I show you some tips and tricks for a successful and budget friendly injector return line repair in you 6.9 or 7.3 diesel. As well as expose the truth about why so many people in Facebook groups recommend russ repair, if you recommend other parts or sources your comments will be censored and deleted. Here are some links to other #idi #diesel videos.
What to look out for when buying a used 6.9 or 7.3 idi diesel part 2
• Buying a 6.9 or 7.3 id...
What to look out for when buying a used 6.9 or 7.3 idi diesel part 1 • BUYING a Ford 6.9 or 7...
7.3 idi race truck build part 1 tearing down the crash test dummy
• 7.3 idi diesel race tr...
Wiring you high idle to a manual switch.
• IDI diesel manual high...
Old timers trick injection pump repair in a bottle
• 6.9 7.3 idi diesel inj...
How to bleed air and prime a 6.9 or 7.3 idi diesel fuel system
• Bleeding air out of th...
Replacing power steering lines in my 6.9 idi
• 6.9 idi ford truck pow...
Idi coolant flush and refill
• 6.9 or 7.3 IDI diesel ...
Ford shower head fuel pick up to fuel sump
• Fuel sump install bull...
Ford fuel selector valve replaced with brass 3 way valves
• ford fuel tank selecto...
3g alternator swap to upgrade your old externally regulated alternator • Ford 7.3 idi diesel 1g...
Facet electronic lift pump installation
• 7.3 idi facet Duralift...
Where to plumb in and hook up aftermarket gauges to an idi engine (oil pressure, water temperature sender locations) • 7.3 idi diesel gauges ...
How to change 7.3 idi glow plugs • 7.3 idi diesel Ford e3...
7.3 idi manual glow plug button how to • 7.3 idi diesel glow pl...
7.3 idi fuel heater delete mod • 7.3 idi diesel ford fu...
High torque starter in a 6.9 or 7.3 idi diesel • Ford 6.9 idi diesel du...
Reviving a 6.9 idi diesel by hotwiring the fuel shut off solenoid and doing a manual glow plug button • 6.9 idi diesel crank n...
Basic wiring to hotwire and start a 6.9 idi from under the hood
• NO KEYS NO PROBLEM! Ho...
Basic wiring to hotwire and start a 7.3 idi from under the hood
• Start a 7.3 idi diesel...
Diagnose and test a heater defrost system that is not coming on
• Troubleshooting and re...
Heat only blows on high DO THIS!
• Heat only blows on hig...
Check out these videos for more information on my #wmo #blackdiesel centrifuge set up.
5 ways to save $ setting up a waste oil centrifuge
• Waste oil to black die...
5 hidden costs to setting up a centrifuge
• Waste oil to black die...
First batch of black diesel ran through my wvodesigns centrifuge
• waste oil to black die...

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 172

@josephsamsor1698 Год назад

I don’t even have an idi, but absolutely agree that censorship is terrible. You should be able to have opposing opinions and preferences to different products. If you have to remove comments for other products, your product is overpriced or poor quality, and it’s definitely scummy to hide information. Some people rely on these trucks running for their livelihoods and it’s really scummy to hide information from those people. Solid video

@worthshop Год назад

Quite disappointing once I was in the groups a few months and kept having my comments and posts deleted as "misinformation" or "harmful to the trucks" which is all a matter of interpretation and personal opinion that seems to favor a certain person's business. It is not productive or helpful to censor and delete. An open honest discussion and way for people to learn or talk out what really is best is not able to happen in that environment. Thanks for watching and God bless.

@ChromeArty 9 месяцев назад

Clearly you boys ain't Democrats 💪🏻🤝🏻

@charleshollingsworth1583 7 месяцев назад

I was working on idi's when they were new. Bought a brand new 6.9 f-250 manual in 1984 373 gear lsd 5 speed manual 2wd and it got 26mpg on highway. Got tired of the lugging and lagging then installed higher flowing injectors special built in 1985 with a worked over stanadyne injector pump topping all that off with the banks turbo kit, propane injection and dual stacks. Truck would get sideways in third gear like my 460 powered 83 f-250. Had my foot in that diesel rolling the coal blowing camaro's off the road. It gave me over 400,000 miles of enjoyment till one day a rod said fu$% it and left town.

@worthshop 7 месяцев назад

Heck ya! Sounds awesome.

@ac0xr409 Год назад

Hey man, just wanted to say great job and thanks for making these videos. Not a whole lot of people still working on the IDIs. Keep it up 👍

@worthshop Год назад

Thanks, appreciate that. You can count on continuing to see idi stuff on my chanel. I have a few projects on the back burner! Will be getting more serious with one of them after the race truck is finished.

@nothim2896 Год назад

Thanks for the tips aspie, been here since your 3g alternator swap video years ago. I appreciate all your idi videos. Don't take it to heart too much, people that go against the grain and tell the truth outside the heard of groupies are never too popular. But your integrity stands above the popularity contest. Keep being you.

@worthshop Год назад

Thanks, will do! Appreciate you being a part of the chanel.

@sircatlord Год назад

P.S. Three Thumbs Up for 'Calling it as it really Is' . Too many videos out there trying to make a quick buck or pad the videos with worthless fluff . This video was direct , showed me what I needed to know , Where to buy and tips that I didn't know before ........ probably saved me from busting O-rings during install. Thanks again.

@worthshop Год назад

Glad you found the video to be helpful. Appreciate the feedback.

@JDfromtheFEE Год назад

Do more how to vids cause your great at it man and saved me a lot of cash

@worthshop Год назад

Appreciate that, any how to videos you would like me to produce in particular?

@JDfromtheFEE Год назад

@@worthshop maybe injection pump replacement and possibly timing?

@worthshop Год назад

@JustJustinJustining I do not have any trucks needing a pump currently. But I am working on a timing video. Just been difficult to get it done with the weather. But it will be posted soon. Appreciate you following the chanel, God bless.

@dieselwrench3621 Год назад

I always use vasaline to lube the Orings and never had any issues 👍 great content keep the videos coming. 🇺🇸

@worthshop Год назад

Good suggestion, thanks for watching. God bless.

@blairpresnell4910 2 месяца назад

Glad I found this page, fixing up an old idi uhaul turned flatbed.

@JosephLReed69 11 дней назад

Thank you For all your HELP.

@DavidDavis-gp7th Год назад

Thanks for the tips and keeping the other guys from sticking in the tip!

@worthshop Год назад

Thanks for watching, hope the information helps you with your projects. God bless.

@wardenclyffemedia2721 10 месяцев назад

This is the best video I’ve found about this process showing everything in detail. IDI info can be hard to find. Thank you so much.

@worthshop 10 месяцев назад

Glad it was helpful!

@brianguenther862 Год назад

This was the BEST informative video i found on replacing my return lines! I have one cap with a broken nipple. Ill replace that with the Delphi kit on order. And redo O-rings on the factory caps. THANK YOU! for the info!

@worthshop Год назад

No problem, glad to share info and help folks out. Good luck with your project and God bless.

@b-rod5411 11 месяцев назад

Great informative video, and spot on calling out Mathis. Those groups turned into a joke.

@worthshop 11 месяцев назад

Tell me about it... I will leave it at that. Have been far from impressed by the kool-aid drinkers.

@o61000 Год назад

Love you're videos I learn a lot from them keep up the good work young man, I recently acquired my first 7.3 IDI 1990 F350

@worthshop Год назад

Nice! Hope you like the truck and it treats you well. Appreciate you being a part of the chanel, God bless.

@estranged85 8 месяцев назад

Thanks for the info! Today i replaced the cups and return lines with the Delphi ones.. two injectors are now leaking. The O-rings felt a bit stiff.. even the ones that was in the truck felt more fresh. I still have the original grey cups, maybe i should put them back with some new O-rings.. also the injector lines were a bit rusty at the tip, maybe they're leaking a bit.

@worthshop 8 месяцев назад

You can verry lightly sand the rust off the lines with emery cloth. Be real careful to clean up any debris when done so it doesn't end up in the fuel system. I would just get new orings and try it again. 9 times out of 10 if you get a leak it is due to the oring getting pinched or nicked during assembly. Lube it up real good and try again.

@estranged85 5 месяцев назад

@@worthshop I did what you suggested and no leaks since then 👌🏼 i also put back the original cups. Thanks!

@thematkave Год назад

sweet vid.. I just ordered my o rings today.. Thanks for the tip

@worthshop Год назад

Glad I could help, God bless.

@Austinsairplanes 5 месяцев назад

I was replacing the plastic caps yearly. I installed the billet aluminum rails from RnD 3 years ago and they haven't leaked yet... Only cons are they are harder to install than the caps, and they cost is more. There is some one on RU-vid selling a kit that uses brass caps, i think this is probably superior to the billet rails.

@GhostyMist 5 месяцев назад

Dregs Diesel/Garage

@crayfishtsi92 Год назад

Us budget idi guys need to keep putting good info out there because buying $800 injectors for a $500 truck is not helping anyone. The information that’s shared in the groups shouldn’t be deleted, so others can go through the info and decide for themselves what they want to use. You can buy two sets of so called “junk” injectors and a pop tester for the same price that some guy on fb is selling one set of injectors.

@worthshop Год назад

That is my main point in making the video, to fight the censorship of information. He and his miions can delete comments and remove people from Facebook groups but they can't censor my yourube chanel. Younger idi guys need to be able to learn about there trucks in am honest manner. Not go into a echo chamber where other opinions are silenced brain washing them into thinking they have to buy parts from one source or their truck will explode.

@Drummavirus 4 месяца назад

I bought mine from CDD. Good info for later boss. God bless!

@CapArchy 9 месяцев назад

Finally a really good video talking about the information issue in those groups, appreciate this one 💪💪 Are there any Facebook groups you'd recommend, ones that don't have an agenda?

@worthshop 8 месяцев назад

My honest opinion on the groups. The bad ones bleed over to the couple that were OK. Too many people want to be the guy to answer a question. They feel some sort of ego boost being the first guy to repeat the same advise they have read without real experience. So it's just a bunch of mocking birds.

@edp9811 11 месяцев назад

These videos have helped me so much man, thank you

@worthshop 11 месяцев назад

No problem, glad to share info. God bless.

@Stewarts_little_engine_repairs Месяц назад

Love it man!

@MansoyHumilde777 Год назад

After a lot of trial and error, i figured out how to fix the idi return lines. First of all you dont put lube on it. Instead you clean everything good and use 3 orings instead of 2 . You put the 2 oring on the injector and 1 on top of the injector just under the cap. Tighten everything back up and walah . No more leaks no more greasy vaseline on your injectors.

@worthshop Год назад

Thanks for sharing that trick, I might have to give it a try sometime. Thanks fir watching. God bless.

@dragonspicks Год назад

Thank you so much. I’m working on my first 6.9 idi this was great info I needed

@worthshop Год назад

Thanks! Hope you enjoy the truck. I fell in love with the idi and now have a collection.

@dragonspicks Год назад

@@worthshop I bet I'll enjoy it with your help for sure 👍

@rexgibbs9644 Год назад

Hey man great job on the videos, thanks

@worthshop Год назад

Glad you like them! Appreciate the comment.

@Stephenbishopp723 Год назад

Thanks!

@worthshop Год назад

God bless, and thank you! Glad to share information.

@chrisduhaime5689 9 месяцев назад

Yellow jacket AC HOSE like 5 or 6 foot works great for return lines thick and strong can take the heat.

@worthshop 9 месяцев назад

Thanks for the suggestion!

@EndoCloudz Год назад

Man you’re a legend! I was thinking of ordering a kit from him and it was $97 cad and thought Meh see how it is to change them and stumbled upon your video. Just ordered me a pack of 50 for $14 😂 so correct me if I’m wrong but mine are still good two just leak a bit I’m assuming the o rings are bad, they are the black caps but as long as they aren’t cracked or broken I can reuse the caps? Just install new o rings? Cheers man 🤘

@worthshop Год назад

Yes, new orings should get you sealed up just fine as long as the caps are not cracked or broken. Make sure to use some lubrication when reinstalling so you do not get any tears.

@EndoCloudz Год назад

@@worthshop awesome thanks!

@samperiod7405 10 месяцев назад

Great job on you videos ! Like somebody already said , there’s not a lot of info on these sometimes and parts stores are Increasingly run by computer clerks any more . Question : what is the cheapest way I can bench test an ejector ?

@worthshop 10 месяцев назад

Thanks for watching! You can get a cheap pop tester kit on eBay or amazon.

@briansouthworth737 Год назад

Thanx, I appreciate all the help . . .

@worthshop Год назад

Glad to help, no worries!

@bobbyknight3589 Год назад

You should do a video on why the idi won't start just cranks over

@worthshop Год назад

I will work on one sometime in the future. Appreciate the suggestion.

@reboundish Месяц назад

What is the Tuque for fuel injectors & Glow plugs. Mine still leak fuel in those areas!

@jonathanredwine78 Год назад

Very helpful information. Great video personality. Keep up the good work glad to be a subscriber here.🤘

@worthshop Год назад

Appreciate that!

@michaelbenoit248 12 дней назад

My IDI still had factory Caps and orings on it at 209k when I brought mine home before I redid the whole fuel system because stock system is garbage. Injector caps no longer feed fuel back to the IP goes back to tank how it should be.

@robertkwiatkoski1292 9 месяцев назад

guy was making brass caps. Seemed very_ cool / interesting. Small shop couldn't keep them stock.

@worthshop 9 месяцев назад

I seen those a couple years back. Pretty good idea.

@MRthekid0ne 4 месяца назад

You are the man!!

@dankean8319 Год назад

My next up grade will be a 5 speed or a 6 speed, not sure witch will be the best choice, I will be putting a 2005 excursion 3.55 limited slip with disk brakes this will match my front gears. Thanks you for your advice it is very appreciated!!!!

@worthshop Год назад

No problem! Good luck with your project. Manual transmissions are way funner to drive. I just don't like the prices people ask for them! I have had several zf5s not a big fan, synchros go bad difficult to shift they are a growly loud transmissions never had a 6 speed, but have seen the asking prices so probably be a while till I do.

@wildrosegarage4208 Год назад

Good video. I have had many idi and like them. I had one idi that no matter what I did it always had leaking returns. I used new caps on it and they seem loose to me. I was wondering if you know anything about using a plastic drain plug washer on top of the cap so the line nut pushes the washer and the washer pushes on the cap to stop movement? I bought a real nice 1985 f350 with a service body its a 6.9 T19 Dana 70. I am going to put new O rings and lines but leave the caps. Its going to be my pull rig. Going from a 03 7.3 to a 6.9 is going to be a change. My idi has dual exhaust it also has an air cleaner like the old banks power pack. I am going to leave it non turbo but I think I will put on a hypermax cowl intake, perferated tube glass packs and turn the pump up about 1.5flats. I will also put a pyrometer in it. I haul my car to the drag strip often and that should be nothing but I also have a gooseneck that weighs 7400lbs on its own and I haul equipment like tractors and crawlers and stuff. That old 6.9 is going to have its work cut out with 26,000lbs behind it. I think the service body is heavy and it will be full of tools. Nolan.

@worthshop Год назад

Thanks for watching! Definitely will be a big change going from the newer truck back to the 6.9! I have watched a video from diesel tech Ron here on youtube. He uses brass drain plug washers to help keep the caps down and tight. He mentions it about 12 minutes into this video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3vqSaDWcCJE.html I have never needed to use his trick, but have kept it in mind for if I ever run into a situation I need it.

@ericmcvay4772 Год назад

Savage calling em out like that. Thanks for keeping money in my wallet

@worthshop Год назад

I like to share information and help people. Once they started deleting the information I was sharing so they could profit... They asked for it! Thanks for watching.

@northwestarrowz3984 Год назад

🎯

@worthshop Год назад

Thanks for watching, hope it helped you.

@wreckerjonny6144 Год назад

I see the aluminum blocks or logs for fuel returns . I own a fleet of these slave lake wanna be trucks.

@worthshop Год назад

I have not tried a set of them yet. But want to in the future on one of the trucks I really care about and want to keep.

@SonofHardrada 6 месяцев назад

Youre a good man, appreciate it and sub'd!

@worthshop 6 месяцев назад

Thanks for the sub!

@rarara5558 Год назад

This guy is going to be the next Zipp ties and bias plys, sorry I can't spell that well. The copper spacers work great on the return lines. Mine have been on there for 5 years and still going strong. You won't win a drag race with it, but that engine will probably out last you. As long as you take care of it.

@worthshop Год назад

I try, but don't think I am nearly as funny as peg!

@KEVINKAHAKUA 2 месяца назад

Howzit aspie never owned an idi which i have now and love it. it's a 1989 f350 dually 6.9 i have an injector that has a leak for a while now. idi started up but dies out when i just started to move it forward. had to prime the filter which i learned how from your video. could the cause be from a leaking o'ring? i want to learn more and will follow only u! im also looking for a spare rim but don't know what years i should look for. can you send me feedback. Mahalo!!

@ervinbrew 7 месяцев назад

Thanks for the vid I appreciate it. I'm working on my first IdI and in the process of bleeding it. Under normal operation, should there be a lot of fuel flowing through the return lines? I have one of the lines off until it bled but haven't seen and fuel yet

@worthshop 7 месяцев назад

Should be a pretty decent amount of fuel out of the return system yes. The idi fuel system returns alot of fuel to the tank as a way of cooling the injection pump.

@ervinbrew 7 месяцев назад

Thank you sir. I got it running, I'm using a lift pump from a jetta tdi. Works good. I'll be chasing leaks for a little while but bot bad

@garonheinz413 11 месяцев назад

I love it brother I'm all about saving the cash and calling up the fucking bullshitters the world's full of them and I'm sick of it we need some good old Ford boys that loved the truth and 7.3 so so keep it up cuz after watching your video I never rush to the Subscribe button so fast before

@worthshop 11 месяцев назад

Glad to share information and help people save $

@Qaswrdx 10 месяцев назад

I know it's kind of outside the scope of this video but what's your opinion on the R&D return kit? Loved the video

@worthshop 10 месяцев назад

Honestly if I ever get a worthy truck I'd like to spend the $ and put the r and d return rails on it. I have no first hand experience. Can commend the guy fir being innovative and designing/building a new part to solve the leaky return line issue all idi trucks eventually have.

@charlesflaco7976 3 месяца назад

Is there anyway you can show the PTO and if a left side pto on a 4 speed (t19) can be mounted on the right side.thank you

@sircatlord Год назад

At 6:12 , you mention " He's the only guy that includes the olive seals ... " You : Well, you can pick those up for a couple bucks .... it's not a big deal . Ok. Whats the part number or website to find a set ? I have a 1990 F250 and so far the results when googling is " DorMan Fuel Injection Fuel Feed and Return Pipe Seal Kit 904-497 "..... however when I confirm 1990 F250 Diesel , it says " Does not fit your truck " . I've watched your video and you have been great about part numbers and where to buy the return line kits, orings ,etc ........ Hoping you can point us to a source for 'olive seals ' Thanks

@worthshop Год назад

Search eBay or Amazon for 5/16" fuel olives, you need a couple of that size. You will need a 3/8" olive seal as well. I have always gotten them at a local hydraulics shop that carries every kind of fitting adapter and hydraulic part you can imagine.

@serranopeppers 6 дней назад

Man I replaced my injection pump and for some reason my key don’t work at the ignition anymore I literally have to start it by the solenoid by the battery with a screwdriver can’t figure out what happened didn’t do nothing electrical

@timwhite5637 9 месяцев назад

Thanks Brother

@worthshop 9 месяцев назад

No problem

@David3Peterson Год назад

Thanks for da tips

@worthshop Год назад

No problem, glad to share info about these old trucks. God bless.

@sambam97 11 месяцев назад

Post a picture of this video on one of the pages. Mod turned off comments within minutes, and then got deleted im assuming when Russ hopped online

@worthshop 11 месяцев назад

Ya, the kool-aid drinkers hate me. I think alot of people just can't accept the fact they got duped into buying a return line kit from russ for double the price. They will argue for days about how superior russ kits are... But he just buys in bulk and resells!

@dylanh1773 Год назад

Man I did everything you said got the same exact kit replaced everything and it's still pissing fuel..ugh!

@worthshop Год назад

Did you get the caps pressed down till they click in place. You have to push down extremely hard to get them to seat.

@Motoman714. 2 месяца назад

Just bought an turbo outlet oring from russ… wont do that again…

@dankean8319 Год назад

Thank you for good advice. On my 1986 f250 4x4 I have two return lines off my caps, one on the Driver side to the main return line and one on the front passenger side to fuel filter elbow to the injection pump. Is this normal?

@worthshop Год назад

Souds pretty tipical to me. Some people delete the one up to the filter head to prevent recycling air into the fuel supply side. There are several possible return line configurations. Google it and you will see different diagrams.

@juliotapia2538 Год назад

I have a 1986 6.9 and doesn't have that round controller that screws to the block that looks grey

@worthshop Год назад

The last year or 2 of 6.9 had the updated 7.3 style glow plug controller.

@joeharvey4987 Год назад

Copper washers should be replaced. If you don’t for a long time they will cause your injectors to get stuck in the bore

@worthshop Год назад

Never heard of that, read about that, or experienced that, until you just said it. Do injectors get stuck, yep. Do I think it is due to copper washers, nope.

@coffeeshangarworkshop8051 8 месяцев назад

Really, somebody just needs to make an ever so slightly fatter o-ring and this would be so much easier. I fought with crappy orings from 2 new kits (amazon then autopart store) leaking before pushing the orings out a tiny bit with a couple wraps of fuel resisant pipe thread tape in each oring slot before putting greased orings on...3000 miles so far and hasn't leaked since.

@worthshop 7 месяцев назад

That is interesting. Not supposed to use thread tape at all in a diesel fuel system. It holds up to diesel, but you risk a little piece of the tape making it's way into the injection pump or clogging an injector. But hey it's working and that's what counts! Way to think outside the box and come up with a solution!

@coffeeshangarworkshop8051 7 месяцев назад

@@worthshop my reasoning was that if any tape comes loose it will go through the fuel return system back to the tank, and then the fuel filter will catch it on the way back.

@thomaslockley945 Год назад

It's definitely hard finding a good idi group

@worthshop Год назад

Kinda sad to be honest. I was contemplating starting a idi uncensored group.

@sambam97 11 месяцев назад

@@worthshopYou should.

@RickJames-qz8vt Год назад

Russ blocked me from the group too 🤣😂

@worthshop Год назад

I have been considering starting a idi uncensored facebook group.

@RickJames-qz8vt Год назад

@@worthshop I’ll follow. Block him asap lol

@salealesana9524 Год назад

Hey just wondering how you would get rid of a knocking sound coming from the 6.9 engine

@worthshop Год назад

If it's a lower end knock, engine needs rebuilt. If it is an upper end combustion related knock, an injector is probably sticking or bad. Start with running some diesel kleen through it next time you fuel up. Might get it unstuck, if not you will need a new set of injectors.

@killerfraggin Год назад

What about the 93 and 94 factory turbo crossover line argument? Where do you stand on that? Comes with two three sided plastic caps for both third cylinders back in front of the turbo.

@worthshop Год назад

Not sure what you mean by an argument, or where I stand on the subject. But the turbo specific kit is not required. As long as you do a crossover and tie it all together. Also the single nippled cap for passenger side rear is not difficult to make by capping a na corner caps nipple. You can look up alternative return line routing on Google. Do what you feel is best on your own truck.

@killerfraggin Год назад

@@worthshop I did the front crossover line in front of the turbo with the three ended caps because there's too much heat at the rear of the engine I guess best bet would be run crossover at front if you only had two ended caps.

@Edocaera Год назад

Not sure I’d share CDD for cheap prices... Huge amount of their stuff is overpriced, and I’ve purchased from them and Russ both. I saw turbos on eBay that were the EXACT turbo kits CDD had for half CDD’s price. My injectors and return line kits from Russ haven’t missed a beat. PO of my truck had a cheaper kit on it that had the wrong size copper washers and the caps were cracked. Just sounds like you’re butthurt about being kicked out of the groups lol

@LockedAndLoaded4x4 Год назад

Agreed, CDD is overpriced, re-boxed, and honestly low quality. CDD relies on people that don't want to seek their own information out and honestly don't know any better, they don't sell anything that couldn't be easily made or obtained through some short homework and it shows. Then CCD manufactures issues with other suppliers and tries to stir up crap with other suppliers to slander them which honestly is a shady buisiness practice. Would never do buisiness with CDD.

@danielpelky3342 Год назад

I third the cdd as they also re sell eBay products. But I also will say any people selling “kits” for pretty much anything is gonna be revoked to some extent. It’s not like on place makes in house viton rings, in house caps, in house clamps, in house hose ect ect that’s just how it is. I’ve used parts house return kits that lasted a bit and I’ve used Russ’s kit that’s lasted since then and at least with him the costumer support is top notch and actually dealing with a real person and not eBay or parts stores on warranty is anything goes wrong or is wrong with it

@worthshop Год назад

I was in no way shape or form endorcing classic diesel designs. Simply showing the price difference in 1 single item. Also russ accused me of being a part of classic diesel designs in a message, so figured I might as well throw them in the mix.

@worthshop Год назад

Reboxed is reboxed, you are correct no one makes all the kit pieces in house. But to run a group and give that impression that russes kits are better plastic, thicker, stronger, better made, the only caps that fit etc etc. Us a lie because they are reboxed. To censor other options is my main issue. Giving new idi guys the impression they have to shop from one person is dishonest

@danielpelky3342 Год назад

@@worthshop your not wrong in there is always other options, I also agree on saving money. Main reason on his is the costumer service and known quality. But anyone can buy the pieces to the kit to an extent and make it themselves cheaper. In the same sense of keeping mom and pop shops alive today as well is also why some choose his.

@LockedAndLoaded4x4 Год назад

🤣🤣🤣 I suppose next we'll complain when the Parts store down the road charges $80-$100 for a Delphi return line set, but even though I don't buy from the seller mentioned as I build most my own parts or R&D, but I can say the "reboxed part" isn't a reboxed part from Dephi 🤣🤣🤣

@worthshop Год назад

My issue is not with the reboxing, or overpriced stuff he sells. My issue is with the censorship, and deleting of people from the Facebook groups for daring to suggest other companies or brands. It creates a dishonest Ecco chamber. New idi owners that may not have the funds for overpriced parts get the false impression there is only one source for parts. It does the idi community as a whole no good to censor individuals with differences in opinions on parts and repairs for our trucks.

@preppingforlife264 6 месяцев назад

Sold me new sub here thanks brother

@worthshop 6 месяцев назад

Thanks for the sub!

@theq4602 Год назад

I know its really overkill, and like gold plating a turd. But personally once I find the IDI truck I want to tinker on and restore, I'm going with those billet return rails that R&D IDI offers. others with a tighter budget probably cant see spending the money on them but I really don't want to be 20 years from now trying to 3d print my own return caps know what I'm saying? Cause one day whoever owns the injection tooling for those plastic caps is gonna call it quits, or they are gonna get the last life they can from those molds and never replace them because why bother with 300k$ worth of injection molding for a market that might bring them 10k$ a year? Then you will have to 3d print them and there's no telling what kind of quality that could bring.

@worthshop Год назад

I plan to order some of the billet return rails eventually. Just have not had the right project truck for them yet. They are often out of stock or back ordered but the web site currently says they have 6 sets in stock ready to ship. Almost worth ordering now just to have around fir when I am ready. Thanks for watching and God bless

@RubenGonzalez-bs5rh 10 месяцев назад

NEED DIPSTICK FOR 83 6.9 IDI, DOES ANYONE HAVE A SPARE ONE? I CAN ONLY FIND FOR 7.3 IDI... IS IT THE SAME?

@worthshop 10 месяцев назад

Pretty sure they are the same.

@1986f250diesel Год назад

I never had an injector return line NOT leak. I've done it twice, and both kits leaked. I was more concerned about the really bad blow by.

@worthshop Год назад

I have never had an idi with bad blowby. But I am selective in what I purchase. I could care less about a beat down rusty truck as long as the engine is good. Always been successful at getting the return lines sealed up though too. Guess we are just the opposite. Thanks for watching.

@1986f250diesel Год назад

@Aspie worthshop it was a crew cab dually with about 276k. I was the 26th? Owner from what I recall. It ran fine, but trans sticky on 2 to 3rd. Frame was perfect all straight. Damn good truck hate to have let it go.

@albertduran5282 Год назад

Hey I have a question on a 83 idi is there a way I can contact you?

@worthshop Год назад

Comment on here is easiest. Or message me on Facebook facebook.com/robert.meader.503?mibextid=ZbWKwL

@thegless1 Год назад

russ isnt an admin or moderator on any page im on. and the delphi kits have been proven to be junk. every one ive installed has leaked. i stopped buying them for that reason if they were any good then why do you only replace the orings? havent seen a video of yours yet where you actually use a single part other than an oring.

@worthshop Год назад

Russ stopped being admin and moderator on about 5 groups AFTER I called him out on his bad business practices and censorship. So obviously I had a positive impact on that whole situation for the idi community as a whole. If you actually watch my videos, you would know the answers to the rest. I have done full kits on several trucks, first one was the free idi truck I got years ago not running, and it ran great after replacement of caps... Delphi caps lasted years until I traded that truck. I don't do videos specific about installing caps, because there is already 50 videos about doing caps on youtube. No point adding another. Again, replacing just the orings was to prove a point. You don't need an overpriced kit from russ to reseal the return lines. You often don't even need caps or lines, just a couple o rings for the win. So even though you are attempting to disprove my point.. You literally just reiterated it. Thank you for your agreement!

@ryancollins3227 Год назад

If i could find a 6.9l idi id be happy i traded my 05 f250 for a 01 excursion with a 7.3l powerstroke but for my homestead i need a truck 🤣

@worthshop Год назад

Always need a truck around for hauling stuff!

@brendonmasters Год назад

Haven't been on fb In ages. The personal consent of using that platform promises you to a mind of pettiness. I'll take the shithouse of RU-vid anyday

@worthshop Год назад

Probably a good choice, Facebook is a chit show of scammers and trolls. God bless.

@luisjonassk8 Год назад

It’s a shame doing this kind of business. Soon or later people will find out the truth. I don’t use anymore this plastics junks return lines caps anymore. I bought a kit were all caps are brass made and they works incredibly great and will last forever. The guy have a RU-vid channel where he explain about it. The name Is Dregs Diesel. Go check it out.

@worthshop Год назад

I looked into the brass caps, he currently has a wait time of 8 months on them. Appreciate the suggestion and thanks for watching. God bless.

@danielokane5209 10 месяцев назад

Amazon says that delphi doesn't fit my 87, and it can't be shipped to my address....

@worthshop 10 месяцев назад

There are 2 styles early style and late style return line caps. Either your hose barbs are centered (7135-264) old style or offset to one side (7135-276) new style. You want to find the kit that matches what is on your truck. Delphi makes both styles search the part numbers I listed above.

@danielokane5209 10 месяцев назад

@worthshop I have 264 style. Amazon still says what it says lol. I just gotta figure out how to ship it

@worthshop 10 месяцев назад

@danielokane5209 That is odd, do you live in California or someplace they restrict certain parts?

@danielokane5209 10 месяцев назад

@@worthshop 😅 I had no idea parts were also restricted here in commiefornia.

@dubious_donut 7 месяцев назад

Like ur content but russ is a stand up dude great service sold me a tail section for a zf5 fir 200 bucks because he said he would man of his word even though he found out they were rare and way way iver that price ..just sayin

@worthshop 7 месяцев назад

We all have different experiences with people. At the end of the day I side with free speech and sharing of information. Not censorship and deleting of comments. I'm sure Russ, as with all of us has done good by some and bad by others. None of us that walk this earth are perfect beyond Jesus.