The Truth about the Oneida Low-Pro Lid Separator! 

I have the same separator but haven't set it up yet. Mine also didn't come with the plastic center plug after looking at it. I emailed Oneida with my original order #, referenced your RU-vid video at 8:30 and indicated my separator also didn't come with the referenced plug. They emailed me back and are sending me a plug as a warranty claim. This is how the part # is indicated on the invoice for future people who reach out: PLUG CAP ROUND 1.125 X 0.52 CCF-1 1/8-14-20 Thanks for posting Jake!

A person's honesty and integrity are paramount. You have always demonstrated them in the past and continue to demonstrate them now. I respect you and your personal character. Keep being an excellent example of how people should conduct themselves in life. 👍👍👍💪💪💪

Appreciate the update and original video as well. I have the original dust deputy and the new 2.5 and they're amazing. I'll be adding a low pro to my miter saw setup very soon.

I'm glad they got the issue fixed. Thank you for the information

That's some good customer service that they jumped onboard and owned that problem. Great to see a company interested in its legacy rather than just quick bucks. Sorry about the video loss but I'm sure the scales will be back in balance and karma restored once more.😁👍💪

Thanks for the follow-up and information. Glad to see that you are a man of Integrity.

Good on you Jake and good on Oneida. Glad you were able to work together and sort out the problem. Thanks for sharing.

wow!!! such a small part can cause so many issue, great video Jake.... props to you for doing the right thing

Great update by both you and Oneida for a win, I was on the fence about which collector to buy until this update>

Excellent, glad it all got resolved. It’s crazy how a little piece of plastic can cause so much chaos. Great video bud!!!!

Well done, Jake. After your last video we had a good conversation about the results and I was hesitant on updating my Oneida. After watching this follow up video I can move forward with that decision. The follow up from the company says a great deal on their Customer Service to current and future customers. Jake, for all you do for our community "Thank you!" Honesty and Integrity speaks loudly. 💪💪💪💪

Nice first impression. This is the first video of yours that I have watched. Keep up the great work. 👽

Glad it got fixed! Glad they wanted to help you fix it.🎉

Thanks for this video. Mine was also missing this little piece. I emailed Oneida about mine and linked to this, and they quickly replied with a shipping notice for the part. Thanks again.

Great to see this - I recently got one of that same batch, and they proactively sent me the plug.

You're doing the right thing for the right reasons - big respect, sir!!! And Oneida, great job making it right for the customer. Win-win all the way around!

Big fan, I own an original because of the first video you did, and now I need another one and it WILL be another Oneida…… rock on brother !!!!!!!

Good Stuff Jake! Integrity, that's what you have my friend. Keep up the excellent videos.

I have watched two of your vids today. This one and the one on the Home Depot dust stopper improved version. Both good vids. This comment is only to let you know I’m going to “borrow “ your Karma Checkbook phase. If more people truly cared about that this world would be a much better place. Ultimately right is right as you stated. God bless. I hope your channel continues to flourish.

Good video. Gotta appreciate the integrity of someone who puts truth over profit. I know there are still a lot of us out there, though unfortunately the culture has degraded. Also, good to see a company that has delivered a good product, and wants to continue doing so. Bottom line, is that I believe just like air and water, life and everything in it, always finds a balance.

I bought the same separator about a year ago. and I would say about a month after my purchase, out of the blue, I received a package from Oneida with the rubber plug and instructions for install.

#karmarules Sorry your video had to go unlisted, but glad it all got figured out. 💙

Thanks Jake. This is great.

Bravo for being ethical!!!! Great info!!

Jake, thanks for this video. I am in the same boat as you were. No black plug in mine. Gonna call them now.

Thanks for doing the right thing, all we're looking for is the truth.

I just found out about you because RU-vid recommended the other video to me even though you have it unlisted. I guess it did that since I have been searching for DIY dust collection systems. Great video. I would like to see what the new CFM is compared to the other video with the bad collector.

Way to do the right thing Jake. Thanks for the update. So what would be your recommendation on dust collection now?

Thank you bud about the funds lost for the views, but you are correct when you do the right thing and tell the truth you get more positive satisfaction.

I have purchased 2 different models of dust collectors from Oneida. Both failed miserably. I put them on the shelf and and began looking for unit that works.

Good JOB, JAKE. Place a tick mark in the positive column of the karma book.

looks like a goody item to have

I watched the comparison video and unless my math was wrong, Oneida was 18% better than the competition at that time using your testing method. Had I not already just bought the competitor model, I would have opted for the Oneida after watching that vid. Next time. 🙂

Jake it would be great to see how the dust deputy would do against sanding dust from a sander. What are your thoughts? Thanks

Husky should make a low profile shop vac with a built on cyclone dust collector. Something that can fit under a work bench. It can be like an oval shape, If the shop vac bucket does not collect dust they can put a powerful motor but a smaller bucket. That way it would save space and have no hoses between them.

i,m getting one of those !

So, I’m still wondering what the differences are between the HD Dustopper Pro and the Lowe’s LowPro? Was I supposed to learn that from this video and I just missed it? 😊 That’s the real question people have - which should I buy if I wanna upgrade or don’t even have one to begin with. Thanks for the video and all the work that goes into it!

Ill subscribe even though your a 49ers fan. , Enjoy the game sunday!

I am in the process of buying one of these "type" dust seperators. I like Oneida's design. Got to check into this for cost vs the orange one.

Hopefully this video will help out someone with the bad version. So they can fix it. 👊

🌪️🌪️🌪️💪💪💪

Did you redo the cfm measurements now that the new piece will change the air flow?

How about a new comparison video since the Oneida is fixed now. 🤷🏻‍♂️

💪🏼💪🏼💪🏼

So now that you've tried a few of these types of devices, which one do you like best. I'm debating on buying one or building one.

I just took a look at mine and it is a different style center section. It has like a cone in the center. However, the cyclone is not working. My shop vac filter is clogging up with a lot of dust in the shop vac and little in the bucket. I have the shop vac attached to the top with the tool going out the other end. I’m not sure what I’m doing wrong but this thing does not work

9:47 my bet, packing and shipping error. No one is perfect 100% of the time, its how you handel it when there is an issue.

I have the Oneida Paul Revere collection. It's flatware.

Postive words from a maker are inportant BUT even more usefull are when you and conmpaniese push back

What is the height with hose attached on top?

I can't find this answer anywhere so I'll try here. Does the Dust Deputy 2.5 or the Low-Pro have a better air flow through them? I'm needing to update my 10 year old Dust Deputy with the most CFM I can squeeze out of it.

Question - Why is the button even there? Obviously there should not be a Hole, but they put a hole & then plugged it up with the button, why?

You didn’t address the fact that it wasn’t 50% better CFM that you mentioned in the previous video. What were the measurements 80 vs 100?

💜💜💜💜💜💜💜💜💜

So if they knew they had a bad batch, why didn’t they start there? Or did you find their issue for them?

Jake you still making a quid out of RU-vid buddy ? How ya been anyhow & are you full time on this gig 🤠

Get your chief's gear now, after the superbowl it will be hard to come by! Isn't Purdy a paint brush manufacturer? Hey all the trash talking the 49ers are doing its only fair we return the favor. As far as the unit goes, Whats your comments on that versus the dust deputy the small unit. I see you use 4" pvc pipe What super dust deputy do you have? I bought a Grizzly 2hp 240volt unit 4 years ago with the big hepa filter I have not set it up yet it has the hepa filter and a collection plastic bag I'd like to turn it into a 2 stage unit but i have not decided to go with 6" spiral pipe or just 4" waste drain pipe i think a schedule 40 pipe is overkill. So how well does your system work? My shop will be in my basement, my home furnace uses a 5" thick hepa filter that cost 40 bucks each so i really need to remove as much dust as i can or the hvac system will put the dust all over the house, and its hard on your hvac system Nice grizzly band saws I'm in kc about 150 miles from the Springfield showroom. Band saws are kinda hard to pull out all the dust back when i worked in a machine shop we had a do all saw it was a 20" band saw most the metal chips fell out the side but they still piled up on the wheels and wheel housing. I looked at the bandsaw you have back in 2002 that size they were 800 bucks back then now they cost close to 2k but so does my 850 dollar table saw the 1023z I wanted a large unit like we had in high-school that was a green powermatic my school district always bought the best tools. Anyway they cut the shop classes My kids barely had shop class in school and they are in there 40s now they don't teach shop at all. Now we have an entire generation That has no clue how to run machines. So much for the information age, you can learn online but its a hands on exp to build skill.

The QC person must've been out sick that day...

Terrible. And, you still have a right angle.

It looks to me 1- The other product still better because you have tested them under same conditions. 2- they had no clue about the cause of poor performance, or they know and deny, but all what they want to put doubt and inconfidence in your finds. 3- it is obvious in your final test you are using fine and limited amount of dust which explained the problem: it works but it has limited capacity with large amount of dust

Less talk more action

Why didn’t you show the difference between the setup or the Oneida at the beginning? A little too much talk at the front of your video…

I think you are wrong. You should leave the first video up and add an end to it saying look for the hole and if you have one email the company for a fix. People might watch that video and then discover the fix. They need better quality control so this doesn't happen again.

I see you like losing products like the niners

to much blabla for some little information....sorry -> fix it