No video :(

The ULTIMATE 3D Printer Enclosure

Подписаться 47 тыс.

Просмотров 99 тыс.

50% 1

In this video I will be walking you through how I made my 3D Printer enclosure that has every feature I could think of outside of having a heated chamber. This video is a little longer because I didn’t want to leave anything out from the build or explaining my though process on why I wanted the features I put into this build. Once plans are available for this video I will link them in the Pinned Message.
Follow On Instagram: / rings_workshop
Support the Channel / ringsworkshop
Website: www.ringsworkshop.com
Plans Available: www.ringsworkshop.com/plans
Tools I Use: www.ringsworks...
Here are links to some of the items I used in this video. These are affiliate links, by using the link below it also helps support the channel for future content.
Creality CR6-SE 3D Printer - amzn.to/47SMhl0
Overture PLA Filament - amzn.to/3GpMOPI
Overture PETG Filament - amzn.to/47DQvNy
Overture ABS Filament - amzn.to/3RtEIvu
Overture TPU Filament - amzn.to/47WKIlY
Overture Nylon Filament - amzn.to/47SMrJ8
2-Sided PEI Plate - amzn.to/46JjjTH
Silicone Bed Leveling Spacers - amzn.to/3Gzwz2l
Micro Swiss 0.6mm Hardened Steel Nozzle - amzn.to/3NbQRTy
Micro Swiss All Metal Hotend - amzn.to/4a5mJCT
Dual Gear Extruder - amzn.to/3uMvlOP
Motor Extension Cable - amzn.to/3NzMWjJ
Drawer Slides - amzn.to/3GuRnYQ
24" x 24" Plexi Glass - amzn.to/3sRVmMc
12" x 24" Plexi Glass - amzn.to/47SMAfE
10" Gas Struts - amzn.to/4a2NqIB
4-Pack of Hinges - amzn.to/4a6nqff
Adhesive Foam Weather Seal - amzn.to/46IkWAP
100 Count 8x22x7 Ball Bearings - amzn.to/4a6RRSM
Pneumatic Quick Connect Fittings - amzn.to/3Nc2ZUw
10ft Teflon Tubing - amzn.to/3RblJEC
Rechargeable Silica Gel Beads - amzn.to/3Neui0u
Raspberry Pi 3 B+ - amzn.to/482skYZ
Raspberry Pi Charger - amzn.to/3QZS1lW
5" Touch Screen - amzn.to/3uFAmIN
Flame Sensor - amzn.to/3RblZn4
2pc Temp/Humidity Sensor - amzn.to/3Rb5A2l
80ft 20AWG 3-Wire Spool - amzn.to/3GqLoV0
24V DC Radial Blower Fan - amzn.to/481KQRb
3M P100 Respirator Cartridge - amzn.to/3tbUjXj
24V 11.8" LED Strip - amzn.to/3R9Fyw3
5pc ON/OFF Rocker Switches - amzn.to/3N7W6DO
100ft 1/4" Braided Sleeving - amzn.to/3uFZXS1
100ft 1/2" Braided Sleeving - amzn.to/46J1yUn

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 291

@thehangardesigns 2 года назад

I got a Prusa Mk3s a year and a half ago. Once I forced myself to learn Fusion 360, the 3D printer has really started to shine. Half of my jigs/fixtures in the shop are 3D printed. All my friends and family still think it’s the coolest thing and I tend to print a lot of stuff for them too. Great video!

@RingsWorkshop 2 года назад

Thank you! I’ve been messing around with a few designs myself and have enjoyed it so much I knew there had to be a ton of people doing the same out there, just not many videos out there on it.

@garthkey Год назад

I learned fusion and started making mad money selling parts to co workers

@dougeldridge1219 Месяц назад

Same. The MK3s just takes it to a whole other level. I'm literally having to level once, and that's it. That baby is ready to go and has produced some really cool, smooth prints. Also, tech support..its just amazing. 24/7 chat has got me out of some jams.

@endall39 2 года назад

I love this kind of video, where the maker is "imagineering" their way through a project. I'm building an enclosure for two 3D printers right now. I'm a little far down the road to use all of your concepts, but still helpful to see you go through this process. Thanks for sharing and not sugar coating where you might do things differently next time. No first time design is going to be perfect and mistakes or deficiencies are where we learn the most. Cheers!

@RingsWorkshop 2 года назад

Thank you! Greatly appreciated!

@KruellNationGaming 2 года назад

The cartridge you put on is a 60925 by 3M. That is a p100 only cartridge only good for dust and particulant. The cartridge you are talking about is a 60926 for multi vapors. The problem with that is the carbon in those cartridges are only rated for 8 to 10 hours before they are saturated. That's at a typical person breathing through them and not a fan. You should build a canister style filtration system so you can pump the air back in the enclosure. I used to give training on proper respiratory usage including types of cartridges, ratings and intended uses.

@michbushi Год назад

Thanks for that, I wasn't sure myself if the cartridge size shown is up to the task, but had nothing but a gut feeling to go by. Could you recommend some parts/plans etc. that would be adequate, and how to estimate service intervals, etc?

@cybertaniwha 4 месяца назад

Also remember those cartridges are only rated for 8 to 10 hours due to moisture from the wearers breath, rendering them useless after a few hours. This is basically a moisture less environment setup / usage. So those cartridges should last longer than the stated time. A multi canister style filtration system would be the most efficient if your trying to eliminate odor and harmful gases.

@Carguyforlife 9 месяцев назад

Man, I'm watching this video almost 2 years later and I'm blown away by how cool this looks! I really respect the effort that you put into this. I need to make an enclosure for my Ender 3 S1 Pro and will probably use some of the ideas you put into yours. The mounting spot for the RPi is probably my favorite part. Great video, and as someone who struggles to stay organized the cleanliness of your shop is so satisfying, lol.

@Repect4 2 года назад

You don't post a lot of videos but man you seem to nail the topics I want to see!

@RingsWorkshop 2 года назад

Haha thanks! I plan to get back to one per month moving forward.

@skigglystars9525 2 года назад

@@RingsWorkshop I'm glad to read that. Love the way your mind works and how you flawlessly deliver the content.

@dustintarpley7772 2 года назад

Very cool set up. I'm getting my first printer in the mail any day now so your video was really inspirational for me. My other hobby is fish keeping so I have a lot of aquariums in my house (14) so definitely going to want an enclosure even though my humidity is still in acceptable range in the house. I have a wood shop as well I inherited from my dad but your skills are way beyond mine. Good job man.

@RingsWorkshop 2 года назад

Thank you, I appreciate that. Glad it gave you some ideas! They are a fun hobby for sure, a lot of cool things you can make with them.

@rpeebles Год назад

Probably going to have to do this for my MK3s since it is kind of loud in my home office. I have only had my printer for a few weeks but already made additional push sticks, mitre saw stop blocks, and even a dust chute for my mitre saw! For me the 3d printer is an employee that I am putting to work for me!

@RingsWorkshop Год назад

Definitely quiets it down a lot!

@MYBB90 Год назад

Man this checks every box Ive ever had for an enclosure. Thank you for providing such a blueprimt

@RingsWorkshop Год назад

Thanks! Glad you enjoyed it!

@Iceman734b 2 месяца назад

@@RingsWorkshopDid you take the plans down? I can't find them. This is what I was looking for to house my printers.

@seebuch93 2 года назад

I've designed drill jigs and marking tools. I love 3d printing it's applicable to nearly everything

@Valisk Год назад

Great looking project! I use an off the shelf 9U server cabinet for my printer. Fits like a glove and really cheap too. The filament is stored in a wall cabinet above, with a feed tube running down into the server cab.

@RingsWorkshop Год назад

I’ll have to look into that!

@crappy_fpv 4 месяца назад

Hats off man i e seen alot of enclosures built 2 of my own in my few years of orimting but thisnis beautiful very good job!!

@RingsWorkshop 3 месяца назад

Thank you!!

@RingsWorkshop 2 года назад

All the 3d printed parts I have for this enclosure can be found on my thingiverse page listed below. I was still learning 3d modeling at the time so hopefully none are too far off. www.thingiverse.com/thing:5353805/files

@PaganWizard 7 месяцев назад

I've been casually into 3D printing for about a year or so, and I have made a few hose adapters for some of my woodworking tools. I really like your idea for filtering fumes, I'm going to have to look into that.

@RingsWorkshop 7 месяцев назад

Thanks! It definitely helps.

@andrewbrown8148 2 года назад

That's a great looking enclosure/cabinet~! My 3d printer just arrived and I can't wait to get started printing in my workshop. I picked up a Prusa MK3S+ kit and it's almost ready to go.

@RingsWorkshop 2 года назад

Thank you! I'm excited for you, so many cool things to make to help around the shop!

@mel9285 5 месяцев назад

After reading all the comments, I agree with the rest of them in wishing that you could eventually put out the plans for this awesome enclosure. I understand that life gets in the way though. Hopefully you can get around to it and make alot of people happy. Awesome job on this though.

@RingsWorkshop 5 месяцев назад

Thanks! I am working on a build currently and after that I am making the plans for this. I really do feel bad about not getting them done. Had a lot of PC issues so did a fresh build recently and have to get everything I use to make videos and make plans reinstalled and setup. I have four sets of plans I will be uploading at that point as I’m behind on quite a few.

@ChainsawSquirrel Год назад

Must be nice to have a full wood shop, my dream right there

@RingsWorkshop Год назад

Mines in a garage, just made it all mobile so I can move it around, someday I want a full shop. Dream of mine for sure.

@NWGR 5 месяцев назад

Amazing job! One of the nicest enclosures I've seen. I miss your videos dude.

@RingsWorkshop 5 месяцев назад

Thanks, I really appreciate that. I have another video in the works. Just got to be too much trying to get one quality one out every month with everything else I have going on.

@NWGR 5 месяцев назад

@@RingsWorkshop Understandable. I hope everything smooths out for you. You have a lot of fans! 💪

@winandd8649 10 месяцев назад

You should use a bowden tube mounted onto the carriage . That way, the filament friction is always the same and the carriage won't yank the spool during a fast travel

@Renrondog 8 месяцев назад

Excellent build. Very well thought out design. Do yourself a favor and buy a premium blade for your tablesaw. Keep the diablo for 2x4s and such. You'll get a clean glue up line from the first cut. If you get burns on the wood your feeding it too slowly, this comes from a less quality blade that warps when pushed hard. I've printed a few things useful for the shop. Best one was a bullet collator for by reloader. Saved me enough to pay for the printer inc. mods. Ender 3 V2

@RingsWorkshop 8 месяцев назад

Yup I have a few Frued’s now, and a new table saw since this build I believe as well.

@MDerelict 10 месяцев назад

Please do post the plans on your site!

@Retrodility 2 года назад

Your cabinet is amazing. I was contemplating building something similar but way less sophisticated. And I still found it to be too much work :-) I'm not printing ABS so I don't need the temperature stability but I was concerned about the humidity a lot but I've calmed down and it turned out to be a non-issue for me. Apart from home fixing stuff I mainly print router templates for motises, grip hole etc. Congratulations on your design and execution.

@RingsWorkshop 2 года назад

Thank you so much! Ya I have the front panel off most the time, I mainly use PLA as I just haven’t needed the strength of Nylon or ABS for most the stuff I’m doing. I thought I’d use them a lot more but with ease of use of PLA and being fine for what I’ve made so far, I just can’t justify the extra hassle for ABS or Nylon yet. But I’m sure someday I’ll push it further and will want to have that ability.

@Defyant123 2 года назад

That's bloody impressive !

@RingsWorkshop 2 года назад

Haha thank you!!

@jimmym2719 Год назад

Awesome built, most thought out complete all in design. Thanks for sharing bro💕

@RingsWorkshop Год назад

Thanks!

@MakerViking 2 года назад

Good video, I like the cabinet.

@RingsWorkshop 2 года назад

Thank you!

@MakerViking 2 года назад

@@RingsWorkshopSubscribed, btw. :)

@RingsWorkshop 2 года назад

@@MakerViking thanks, greatly appreciated!

@foleysshop4258 2 года назад

That is amazing. Great eye for detail.

@RingsWorkshop 2 года назад

Thank you so much!

@aaronmiller6043 2 года назад

This is an amazing build man.. I was both happy and sad while watching it.. Happy because of how badass it as, sad because I will never have anything close to it.. :) Keep up the great content!!

@RingsWorkshop 2 года назад

Hahaha thank you so much! I appreciate that!

@ge2719 Год назад

another thing to think about, is if you want this to be a heated chamber then having the enclosure envelope the entire printer means the electronics are being heated, greatly reducing their life. Ideally the motors, the motherboard, the psu would all be separate from the heated area. a good heated enclosure would be just around the print volume. Which isnt easy to achieve with the motors being so close to the build plate, but theres usually enough space to build something out of say polycarbonate and insulate with some thin insulation with reflective material.

@andiatbaden9990 6 месяцев назад

Hi, i was looking for the plans, didn't find them on your Homepage. Great Design

@RingsWorkshop 6 месяцев назад

Haven’t made them yet, they are next on the list but not sure when they will be ready. My apologies.

@Glacialsss 2 года назад

Just crazy amazed, keep up this good work. Worth the sub

@RingsWorkshop 2 года назад

Thank you so much!

@anttechairsoft 2 года назад

Sir, PLEASE for your sake if you care for your fingers, use a guide tool instead of your bare hands on that table saw! I had a bad accident 2 years ago and I am very lucky to still have my fingers. I urge anyone reading this to not be negligent like I was.

@RingsWorkshop 2 года назад

I use a push stick a lot of the time, if I use one when it’s a larger board it feels unsafe as I have less control over it. It’s also the reason I bought a SawStop, but that was after filming this video. Awful that you had an accident.

@Imspikebdn 9 месяцев назад

Happened to my grandpa not that long ago. Last cut and lost his push stick. Trip to the er

@Phattie763 Год назад

you should add a carrot feeder between the filament chamber and printer to make life easier

@baljazz 2 года назад

Bewtiful..now if only wood price would drop. Trying to do a hybrid enclosure which encloses my 2 CR10s Pro while incorporating a workbench and garage style tote storage. My estimate is roughly $250 right now. Had I done this 2 months a ago it would have been $150.

@RingsWorkshop 2 года назад

Ya pricing is all over the place. One reason I went with what I had on hand, even though it wasn’t the best option.

@sierraecho884 8 месяцев назад

That´s awesome, I build something similar. But since I had almost no tools beside a power drill I used 3 IKEA Lack tables which I stacked and placed PC panels in between, used LED lighting up top and made small cabinet in the bottom. I also added wheels to easily move the whole thing. With the new printers they shake too much so I added a pavement plate, basically a slab of concrete inside on a rubber mat which solved the issue. Cost me like 50 bucks and looks pretty great.

@RingsWorkshop 8 месяцев назад

Thanks! I had contemplated the Lack tables as well.

@sierraecho884 8 месяцев назад

@@RingsWorkshop Your solution is better. Not only quality wise but you also most likely have more space inside and you designed your dimensions exactly as needed. Today with my capabilities I would also build one from scratch instead. MDF is not a bad choice btw, he fire hazard is lower than you might think. For one you can impregnate the wood with a fire retardant or with fire retardant paint, cost 10 bucks for a 400ml rattle can. But even if left alone, wood does not burs as well as people might think. Once charred the black surface gives you good resistance. That´s also why so many buildings are made out of wood and still fulfill the code. You can add a fire alarm inside they don´t cost much and give you extra safety. You can also add an automatic extinguisher inside, or both.

@RingsWorkshop 8 месяцев назад

@@sierraecho884 ya, I just figured people would comment on it so I tried to get ahead of it haha

@sierraecho884 8 месяцев назад

@@RingsWorkshop Well done mate =)

@ChazBword 2 года назад

Absolutely amazing.

@RingsWorkshop 2 года назад

Thank you so much!

@beurownboss1554 Год назад

wow dude fantastic build!

@RingsWorkshop Год назад

Thanks!

@pinnacleservices6671 2 года назад

This is absolutely amazing. Thank you for the video.

@RingsWorkshop 2 года назад

Thank you! Glad you enjoyed it!

@christiannorwik Год назад

Thanks for video and your thoughts. I recently bought 3d printer and I’m in the process of making my own enclosure as people favorite IKEA LACK is pretty shitty (v1 & v2) and I feel like building them is more less just waste of plastic as both versions lack few features I want.

@RingsWorkshop 10 месяцев назад

I thought about using that system as well. Sorry for the delayed response, had quite a few comments not show up in my app for the last few months and I just realized it.

@kevinbaxter1571 Год назад

nice job man. you got skillz

@RingsWorkshop Год назад

Thanks!

@scratchinjack608 2 года назад

Nice. I primarily print with PLA and would be overkill but it would be great to have a choice between filaments. Make your feed direct drive on your printers. It'll save you a lot of headache.

@RingsWorkshop 2 года назад

I talked about that and showed parts of me switching it to direct drive in the video. So glad I did that.

@MarioIArguello Год назад

Nice setup, while I do not favor fully enclosed systems, as this has more cons than pros, I do like your thought process in your cabinet approach. The best way to deal with print fumes is to exhaust outside. I don't have that issue because my machines are in a dedicated room that has a huge wall exhaust fan, and it sucks not only hot air, but dust, and sometimes too much AC when I have the AC running. The best way to print ABS is to concentrate the hot air just around the print area. Keeping a fully enclosed machine, even with the power supply outside, you are still making the steppers and anythig else that is inside it hotter than they need to be.

@RingsWorkshop Год назад

Appreciate it! I know it’s not the ideal setup in a perfect world, but for it needing to be in a living space and not being able to exhaust outside it was the best solve I could find. Good advice on ABS, the nice thing with the side panels is I can leave them open a crack at the top so the bottom stays warmer by the bed but hot air can still escape if needed at the top.

@MarioIArguello Год назад

@@RingsWorkshop you could use the hot air to the benefit of keeping the top located filaments dried.

@salihmohamed7683 Год назад

VERY NICE

@RingsWorkshop Год назад

Thank you!

@dre7637 2 года назад

I just found your channel and I love it! Keep up the good work!

@RingsWorkshop 2 года назад

Thank you so much!

@shashvatverma5673 Год назад

very cool project!

@shashvatverma5673 Год назад

could you link the video of the fan and filter?

@Lattenkiste Год назад

I built an enclosure mainly to keep the kitten off the printer. I haven't started printing yet, but it's not air tight and it doesn't have ventilation set up. I'm contemplating if I should be concerned about fumes.

@RingsWorkshop Год назад

PLA isn’t bad, it’s when you get into the more durable ABS and beyond things that I was more concerned.

@Cristina-hz9pc 2 года назад

such a cool video! :) such a nice enclosure rings!

@RingsWorkshop 2 года назад

Hahaha thanks buddy! Appreciate it!! Hope all is well with you!

@craigfisher9233 Год назад

Where is the "Add to cart" button?!?!?! Sick build. Wish I had to tools.

@RingsWorkshop Год назад

😂😂. Thanks I appreciate it!

@michaelfox3145 Год назад

great video thank you.

@RingsWorkshop Год назад

Thanks!

@pablosalazarcomposer 2 года назад

That enclosure deserves a direct extruder printer lol, awesome job!

@RingsWorkshop 2 года назад

Hahah thanks! Appreciate it!

@josephKEOarthur 2 года назад

Now to get OctoPrint to work with my MakerBot Method X

@user-jf5gg9kd6r Год назад

cool

@RingsWorkshop Год назад

Thanks!

@geekguidance3753 Год назад

Would love to see the plans for this item. I am currenty working on a new workshop and I would love to have 1 if not multple of these enclosures for the 3d printer. Would possibly need to make adjustments to fit a CR10-v2

@RingsWorkshop Год назад

Had a lot pop up this summer unfortunately so I’m behind on about everything by months, really want to get them done. After next video that will be out in November at some point, they are next.

@1010tesla Год назад

are you getting close to posting the plans? I have been checking the comments for several months hoping to see an update. looking forward to an update. thanks for sharing this build.

@RingsWorkshop 10 месяцев назад

I FINALLY got the video done so the plans are next up on the docket. My month or two break turned into a year of doing other things around the house so my sincere apologies on the delay.

@illuminatimagepvp Год назад

I want to make this but I can’t find the plans on your site. Great enclosure

@RingsWorkshop Год назад

I unfortunately did not make plans on this yet. I hope to someday but I haven’t yet. My apologies.

@makernova8160 2 года назад

Brilliant! You really thought of everything. This is one of my next few projects to tackle so I'm happy that I have this to reference. I'm curious to know how do you handle spools that have a small amount of filament left on them? Do you just print with it until it runs out and then swap in a new spool? I've been trying to scour the internet for a good solution. I know there are devices you can add on just before the feed into the printer that are advertised as being able to print with multiple filament colors. You could theoretically print using a bunch of spools that are running low. Those devices seem to be on the pricey side though. I've seen people weld filament together and rewind into a bigger spool too. Anyway, thanks for sharing!

@RingsWorkshop 2 года назад

Thank you! I tend to just use it for something small and use as much of it as I can. I didn’t want to mess with trying to weld them together as I’ve heard mixed results and like you said, pricey. I normally use it to calibrate something. Temp test, stringing, overhangs, layer adhesion, esteps, calibration cube, etc.

@briantkiger 2 года назад

With your Raspberry Pi inside the same chamber as your printer, do you ever find that your pi gets too hot and the CPU throttling kicks in? Or, is the air circulating enough inside for that to not be a problem? Awesome build and is giving me a few ideas about doing my own!

@RingsWorkshop 2 года назад

Thank you! No I haven’t had any issues with it, I thought about moving it but since I wasn’t actively heating it, I wasn’t as concerned. That said, I haven’t done more than a 10 hour print with all the panels on yet, as most my longer ones are PLA and I leave on of the panels off so it doesn’t get too hot.

@csenior10 2 года назад

Unless I looked away at the right moment, I didn’t see any images of the full completed build. The drawings looked great but I really wanted to see what the completed build ended up looking like.

@RingsWorkshop 2 года назад

At the end before I went over things I would change I did a top to bottom (or bottom to top, I forget now) shot of it and then some final features and it printing. The thumbnail also has a finished photo and I have it on my Instagram as well. Hope that helps.

@jasongooden917 4 месяца назад

looks like you are building Mother Brain from Metroid

@Traveltech360 Год назад

the piece you added to the top of the printer its lare and round so it lets all your filament connect down to one what's this devices called and also where did you buy it. I like this idea very much.

@RingsWorkshop Год назад

Designed and printed it.

@Traveltech360 Год назад

@@RingsWorkshop can i buy one its a great idea im in the middle of a build myself and could really use it.

@RingsWorkshop Год назад

@@Traveltech360 I appreciate it. I don’t actually sell the parts but I have all the pieces available for download on thingiverse. The link is in the pinned comments of the video. Hope this helps.

@raymondwerker1 Год назад

Looking awesome. When can I buy the drawings?

@tftg458 Год назад

Good video, wish there was a beter view over the entire thing and functionalities.

@ritesha8050 3 месяца назад

how about power supply cooling and mcu cooling , is that needed?

@RingsWorkshop 3 месяца назад

If I was using very hot materials, probably for the MCU. Since the power supply is outside the main chamber it would not need that.

@dguy-xk4fc 2 года назад

Where are the final result shots? Is this only part one?

@RingsWorkshop 2 года назад

19:03 displays the final shot of it and final features I finished up with.

@skigglystars9525 2 года назад

Thought of everything.

@RingsWorkshop 2 года назад

I tried hahaha. Only wanted to make it once so didn’t want to leave anything out.

@jccbsl1 Год назад

I'd be interested in knowing what you think and what you'd do different after using your enclosure for a year.

@RingsWorkshop Год назад

Biggest thing would be to have the filament feed down the center vs the outsides to reduce friction and then add doors or some other way to swap out the silica crystals.

@Morcego538 5 месяцев назад

I´m curious how you felt wen Bambu Lab X1C poped up.

@RingsWorkshop 5 месяцев назад

Want one. Will likely be my next printer.

@Ender_Wiggin 6 месяцев назад

Really like this Enclosure but i dont see the plan on your website. I want to know if i can fit a prusa XL in here. I think it would be perfect

@RingsWorkshop 6 месяцев назад

I still haven’t made the plans yet, it’s on my long list of things I want to work on but haven’t gotten to yet. I have a bad habit of starting something new before finishing the previous project. My apologies.

@Sgtwebbpd Год назад

Can you share the file for the filter adaptor for the fan filter? Can't find that one you used, only smaller ones.

@RingsWorkshop Год назад

This is the one I used. www.thingiverse.com/thing:3331276

@ryanmoore1531 Год назад

As always, quality work man. Love your content. Do you leave this in your workshop? Do you have any issues with dust getting in when you're using your other tools?

@RingsWorkshop Год назад

Thank you! This is in my basement so no sawdust around.

@MacGuyverr Год назад

Do you think this is build-able without a table saw? I have miter and skill saw. I also have a router but I doubt that would have any structural use.

@RingsWorkshop Год назад

You would need something to rip the pieces down, if you had a circular saw you could make a straight edge to get the job done.

@Mitch3343 7 месяцев назад

Does anyone have the link for the fillament roller rack? Ive been having a hard time finding this one.

@RingsWorkshop 7 месяцев назад

Link to my thingiverse site is in the pinned comment for the video which has the download link.

@ericsmith780 2 года назад

I already designed my cabinet I’m more interested in where you got the plate for the fan to attach the respirator filter

@RingsWorkshop 2 года назад

This was the one I used: www.thingiverse.com/thing:3331276

@AWakeWriter22 6 месяцев назад

Awesome design! Are the plans available anywhere yet?

@RingsWorkshop 6 месяцев назад

No. I’m the worst. Haven’t done as much in the shop lately however just started a new project last week so hopefully this gets me back up and going. Miss it.

@AWakeWriter22 6 месяцев назад

No worries, man! Life gets pretty busy sometimes. I know how that goes. Don't be too hard on yourself. I was hoping to build this sometime soon. Looking forward to buying the plans as soon as they're available!

@jakeMTSU 9 месяцев назад

those clamps in the back ground 3d printed?

@RingsWorkshop 8 месяцев назад

Nah those are normal clamps.

@TallynTech 2 года назад

Just found you and cool video this is something I would love to make but I think I'm looking to make something that will be able to server a couple printers. I have a Qidi Tech X-Max that I have done a lot of 3d printed mods too and as well installed the all metal hot end from Qidi Tech to make life easier printing high temp things like nylon and carbon fiber stuff. I also have an Ender 5 Pro that has all the 3d printed mods as well and just a simple conversion from bowden tube to direct drive with all the stock parts. I've also put my spare build plate that came with my Qidi Tech on my Ender 5 and that was a game changer due to the stock Ender build plate being poo. I would really like to make something that resembles just the top portion of your chamber that holds the spools and have it hanging by some chain or maybe some plastic coated cable with a pully system to raise and lower it for obvious reasons. Nice job and thank you for the ideas

@RingsWorkshop 2 года назад

Thank you! I also hope to someday have multiple and have already been thinking how I could make it better and service multiple printers at once.

@azbycxdw8471 Год назад

muy chévere!!!

@denizsevinc9334 8 месяцев назад

I have a creality ender 3 v2, i didn't use it for over a year, my filaments have all gotten a lot of humidity and i cant seem to print anymore, should i throw them away or is there a way to salvage them again ?

@RingsWorkshop 8 месяцев назад

There are ways to salvage but I’ve never tried it myself. I know some people use food dehydrators or have a special box that will suck moisture out, think sun Lu makes one. Again, not sure how well it works but worth a shot if you have a good amount of filament. Not sure if there is a point where they are too far gone or not.

@MacGuyverr Год назад

Does anyone know where that filament crown he got is from? i cant find it anywhere and its not linked in the description.

@RingsWorkshop Год назад

I designed and printed it. It’s listed on my thingiverse which is linked in the description of the video.

@adithyab2497 2 месяца назад

great design .. where can get the link for the blue print??

@RingsWorkshop Месяц назад

Hoping to have time in the next two months to complete four sets of plans I’m behind on. But still none as of now.

@adithyab2497 Месяц назад

@@RingsWorkshop thanks for the reply waiting to build an exact same encloser ....

@juleslataxes2630 9 месяцев назад

man this is truly insane in all of the best ways, thank you for this. currently working on replicating your filament system in my enclosure. im having some trouble though and could really use your help! Sorry if ive missed something but ive replayed the video many ttimes and still cant find a resolution. where are the main and short bolt encorporated? as well as filament holder cap, bearing mounta, and bearing cover? the names feel self explanatory but im not the brightest when it comes to building things and cant find where you encorporate them witthin the video. All i see is the filament cleaner assembly and the assembly of the bearing and threaded elevation setup. so theres overall 32 pneumaatic fittings needed? Ive printed most of the items for this build but am stumped on this part, any info will be of help, thank you!

@RingsWorkshop 9 месяцев назад

Some of the hidden parts were used with the initial setup that I scrapped and went on to the one that used normal bearings. May be from that. I don’t have the fusion 360 file handy, I don’t see it on my thingiverse, can you email me a picture of the parts you are referring to? It should be 32 fittings, correct.

@juleslataxes2630 9 месяцев назад

thanks for the reply! ive just emailed you more info@@RingsWorkshop

@juleslataxes2630 9 месяцев назад

@@RingsWorkshop man i wouldve just given up by now but this is the last step im way too far in, no reply to email unless i missed it. ive tried redesigning a bearing cap and printed mutliple samples trying threading but notthing that works yet, but im also very unexperienced with designing myself i just figured desperate times. the issue is that the bearing cap has no way to clip or fit onto the end of the end of the Main Bolt. theres a very small circle in the center of both which makes me think im supposed to do something with tthat hole to make them attach? but i have no idea what since the visual in the tutorial is catering to a different outdated design compared to the files. seriously appreciate any help you could give me at this point. i know, it sounds so simple but i promise ive spent hours with no luck maybe im just dumb but i just need to move on its been way too long for me working on this

@MakoPCandNetworking 2 года назад

Any idea when you will have plans available? Love the design you have here... I was thinking about doing a lack enclosure, but want something nicer like what you have done here. I am thinking about doing it with ceder paneling to help even more with moisture.

@RingsWorkshop 2 года назад

I will have them done this month. Have some time off work starting end of next week and I have four sets of plans I’ll be getting ready to post.

@viktorkosturkov5866 Год назад

@@RingsWorkshopWhere i can find the plans? I was getting into the website which you provide in description about the plans but cant find anything on it.

@RingsWorkshop Год назад

@@viktorkosturkov5866 I failed everyone and still haven’t made them. Have some time off soon I’m hoping to catch up on videos and plans but we will see how that goes. My apologies for still not having them done.

@viktorkosturkov5866 Год назад

@@RingsWorkshop No problem, will try to design something different. Thanks anyway and nice build.

@wayne6318 Год назад

Thanks for sharing this with us, have you made the plans yet? I certainly would love to build this and stop having to buy new filaments because of the humidity

@RingsWorkshop Год назад

Should have them ready end of this month / early Feb.

@taylorb9667 Год назад

@@RingsWorkshop did you ever get plans made up for this

@RingsWorkshop 11 месяцев назад

@@taylorb9667 I have not. I’ve been away for a while, took on a big project and have had a lot of changes with my job so have had little free time to work on things for the channel. It’s still on the list, but I have no eta, my apologies.

@taylorb9667 11 месяцев назад

@@RingsWorkshop no worries I hope everything irl is getting better!

@XxViper06xX Год назад

I'm not seeing the plans for this on the website. Am i missing something?

@RingsWorkshop Год назад

No, they are still on the to do list. Next video should be out next couple weeks and then these plans are next. Just way behind.

@frandalzotto7244 Год назад

Excuse me, are the plans available?

@Ezunit1991 Год назад

Was that too able to keep filament dry?

@RingsWorkshop Год назад

Pretty well, ya. Not as much as an actual dryer obviously, but night and day from them just sitting out. Noticeable difference between the top area that’s mostly sealed off than the main chamber below.

@bkramkowski Год назад

Are the plans for this still available? I couldn't find them under /plans on your site.

@RingsWorkshop Год назад

Sorry for the delayed response. I never made plans for them, my apologies, it is on the to do list but I haven’t touched it in a while. If/when I make them I’ll put a pinned comment on the video.

@masontejera506 Год назад

Dang - was looking forward to buying your plans - curious - what happened to 'em?

@RingsWorkshop Год назад

Still in progress. Had a lot go on over the summer and haven’t done a video or much in the shop for a bit. However all of that is done so Monday I get back to work on next video and those plans are the next thing that will be done. They will be done by year end. Just embarrassingly far behind on what I had planned to get done.

@masontejera506 Год назад

@@RingsWorkshop no worries dude! Looking forward to seeing them!

@rainmaker1446 Год назад

Ever get around to making plans for this?

@RingsWorkshop Год назад

Not yet, but I promise they are coming. FINALLY got all my other project done around the house, and my wrist that was messed up for two months is healed, so I can get back to finishing the video and making these plans.

@danseino2265 Год назад

Bonjour y a t il des plan

@krapstarr 2 года назад

Nice build! I would not bring your fingers closer than 6" to the blade on your table saw...my 2cents.

@RingsWorkshop 2 года назад

I have a SawStop now, no worries! :)

@MegaShadow29 10 месяцев назад

How is that MDF holding up? any safety concerns or issues with heat?

@RingsWorkshop 10 месяцев назад

Good, no issues whatsoever but I mostly print pla

@MegaShadow29 10 месяцев назад

@@RingsWorkshop have you tried ABS with it at all? thats my main look into this build. Ill mainly be printing pla but im also tired of my office being a sauna

@RingsWorkshop 10 месяцев назад

@@MegaShadow29 I have printed a few times with it. Had mixed results, mainly due to my impatience and trying to print it too fast without enough bed adhesion so corners warped

@robertwolfe1879 Год назад

This looks amazing! Are the plan’s available yet? I don’t see them on your website

@RingsWorkshop Год назад

No. All the 3d printable parts are available on my thingiverse for free though because of the delay in the plans. Next video should be done shortly, these plans after that.

@kevinv.688 Год назад

Went to your website to buy the plans, but they're no longer there?? Is a V2.0 coming?

@RingsWorkshop Год назад

Actually haven’t finished them. Top 3 on to do list, currently battling what looks like carpal tunnel in right wrist so projects, videos editing and making plans has been a bit of a set back. Hoping to know more next week.

@hammondclarke942 2 года назад

Hey I love it I want to get some one to build this where can I get the blue print for ur entire set up please I am new. I will be buying a ender 5 pro.

@RingsWorkshop 2 года назад

Thanks!! Hoping to have the plans ready within the next two weeks!

@TDSWaldo Год назад

This thing is AWESOME! Any chance you are selling them? :)

@RingsWorkshop Год назад

Thanks!! Will have plans at some point, but not the actual unit haha.

@TDSWaldo Год назад

@@RingsWorkshop That's a shame. I live in a condo and don't have a place to do wood work, but this case is the best I've seen anywhere. An idea to solve your problem with it being hard to get to the filaments, what if you put them on the left and right, with wing like doors instead of a big top door?

@RingsWorkshop Год назад

@@TDSWaldo I had that as the initial plan and didn’t like the look, but I do think it would be a much better idea.

@DaveGregson Год назад

Any chance of the plans sir?

@RingsWorkshop Год назад

At some point I will have them. I have all the 3d printed parts available for download, just haven’t made the plans for the cabinet yet. The plan is to get next video out over next two weeks and have these plans out shortly after that. Had a lot of stuff pop up the last 6 months and wasn’t able to do much for the channel unfortunately.

@aerothan4386 Год назад

When are the plans going up?

@RingsWorkshop Год назад

If missed like three deadlines I’ve wanted to have it done by as I’m backed up on things. Next month or two they will be out. Hold me to that lol.

@peterchang7646 2 года назад

3d printing newb here.... How come people don't put some dessicant in the main chamber of their printer enclosure? Wouldn't that help keep the filament better, especially if you don't use the printer every day?

@RingsWorkshop 2 года назад

If it was closed off, yes. But the main chamber is open most of the time so it would be circulating air way too much to do anything.

@peterchang7646 2 года назад

@@RingsWorkshop Thx for the reply.... why is the main chamber open all the time?

@RingsWorkshop 2 года назад

@@peterchang7646 I mainly print with PLA, which you don’t want to get too hot because it can warp, or droop. So I leave a panel off most of the time when I’m printing with that. It also is open when I’m working on things on it (changing nozzle, cleaning the bed, tightening belts, etc.) so air would be in and out way too much. You could lower the floor I suppose of the top chamber so less is exposed underneath though.

@Tensquaremetreworkshop 2 года назад

I use my 3D printer for a number of woodworking items- one you may be interested is my 'buttonfix' method of joining timber. Similar to a commercial version, but much cheaper when you make your own. See ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b7w83XW3gwM.html for details. Files for these are on Thingiverse.

@RingsWorkshop 2 года назад

Love it!