The Ultimate Glock Build | Radian Ramjet/Afterburner | Aimpoint ACRO P-2 

400 bucks? Let's be fair, if you place the order on the right website you can probably knock at LEAST 10% off of the 389 asking price. This brings you in around 350 before sales tax (sales tax in my state is 6%). If I compare that to a threaded barrel and comp for my PDP that's going to be 249 for a factory barrel or 284 for a Jarvis barrel, and then it's 100 dollars for a PMM comp. I'm betting with Glock you can probably find some dirt cheap Glock barrels, and then you can just buy the cheapest comp. That being said, the asking price for the Radian setup is quite reasonable. I wish Radian would just come out with more versions already. There are states like mine where you might be able to get your hands on a threaded barrel and comp but it's technically not legal, and you would need to red loctite it onto your gun.

They need to make one for tte 43x\48!

@@Big6Duke that’s 2 different barrel lengths right there. I agree, but they are hardly able to keep the G19 length in stock. I think once they saturate the market with the G19 lengths others will follow.

@@Big6Duke They can likely adapt the technology to the 43X/48, the problem is retooling machinery and having additional output when they are already at max capacity on the 19 and sell out in minutes.

@@GBCNBSN that's what I like to hear sounds like it's time to grow !

Yeah man! I dig it for sure!

Did you get the Compressor also? I can't find it in stock.

the underwood extreme defender 68 plus p ammo shoots like a laser out of this radian ramjet glock combo I have

@treycardona3799 that blueline uses underwood bullets. Sick ass looking and performance. Wish more shops carried underwood here. I've tried the Norma 60 grn frangible they don't cycle with the ramjet ftf.

I don’t think I’ve ever seen them in stock

I just did what I never do and just overpaid on gun broker.

Gen 3 in-stock on brownells right now

Gen 4 in-stock on midway

Optics planet got em

There is no noticeable difference I have the exact same set up and my shot didn’t feel any different

I ordered a glock 34 holster last week in preperation for the G17 Ram and Burner

Awesome! Thank you! We appreciate that man!

Hey oh! Appreciate that man!

@@treroney4720 they all feel very similar. I think you would have to shoot all of them side-by-side to be able to notice a difference.

@@RogerBarrera will do. When I get back to the states I’ll defiantly buy one and build another one. Currently active duty in Japan can’t wait to get back!

Thanks man! Much appreciated!

Hahha thanks Matt! Yeah it’s been a minute since I’ve run a Glock, the setup shot very well!

@@RogerBarrera would you take this or a prodigy if you had to decide

Good eye. I’d stick to underwood ammo.

@@locophoto6881 yes it will.

@@locophoto6881 make sure you use gen3/4 Timney for the shadow systems

I sling shot it home manually because I like to insure a round is loaded. I had rounds not seat all the way using the slide stop and yes my armor was hit. Irl I don't care about times as long as I know it will go bang.

Verify if it works with your SLR slide.

Yeah man! Def dig the setup!

You gotta grab the new performance trigger and throw it in there. That thing is so much better than stock and improvement over the timney!!

@@jessecampion8316 yeah just waiting for their release! We tried to get it for this video but nobody had them including Glock.

@@RogerBarrera yeah you’ll love it was lucky to get one in the first release I’ll be interested to hear your thoughts on it given all the different stuff you shoot. Great video as always!!

@@jessecampion8316 thanks man!

Glad you liked it! Appreciate you checking it out and taking the time to leave some kind words!

Hope you enjoyed it!

@@RogerBarreraabsolutely, I’ve got an afterburner/ramjet and guide rod on the way for my 19 gen 5. Running a holosun scs that I’m really liking, Taran tactical +5 baseplates and a nine x nine magwell. It’s looking sharp, icing on the cake with the radian comp once it arrives

Haven’t checked it out yet, sounds interesting.

Aimpoint plate

Or run the tactical development trigger and mp3 striker. Lose half a pound on the trigger pull still retain all stock springs.

Hey oh! Great minds think a like!

@@RogerBarrera can you tell me what size the iron sites are, wanting the same for mine. Thank you

Bwahahah yeah the grip angle will do that to ya 🤣😂

For me the Acro is much crisper

Switch to green. Cuts the starburst in half.

Crispness and clear of them all

@@huckleberry3822 Also cuts the battery life at the same time

I used the recoil spring from radian for the setup, no issues.

No I ran the 18lb spring mostly during this video

@@RogerBarrera, nice. Seems like a lot of people can use the factory spring. Ever other round for me was a failure to feed until I switched.

No you can use a plate

I used the spring from radian for this setup.

@@RogerBarrera is it the 15 pound spring

@@frankmischler4424 not sure to be honest. Radian made a spring setup for this and that’s what I ran in this video. I don’t remember the exact one as we shot this video a while ago.

I shoot super far south. Just research bureau land management shooting areas for Clark county.

Get the soft version for comps it's fantastic

@@Usso7 where did you pick up yours?

I have an Agency Arms/Sage Dynamics 19x with comp build I wouldn’t mind sending over to Roger for a comparison versus the ramjet.

The Glock mos one

I think it’s from Aimpoint and comes with maybe.

Oh ok. I ordered the FCD one earlier. I appreciate the response tho

AMG Lab Commander

The Radian Ramjet is a barrel/comp combo that work with each other (no threads). It does not mount to a threaded barrel like other comps.

@@edgarsantizo6654 I know that.

@@Drifthazewell you said it as if having the shadow systems threaded barrel was a reason you got threaded vs not. even though you’ll be swapping out the barrel

Why not get a threaded barrel.@@surefiresteak0292

Ameriglo but now the radian 6 back up sights with the guardian for an rmr

Thanks! Appreciate that!

@@RogerBarrera Is that print going to be available or was it a limited time thing only? I don’t see it on the website as an option. Thanks.

@@savagegentleman3583 it’s on the site now listed as Retro 80s. 👍🏼👊🏻

@@RogerBarrera 👊🏻 Thanks for the reply, brother. Unfortunately, I still cannot see it as an option on the site. It’s not showing in the available fabric overlay photos nor in the drop-down selection for holsters like the Wingman. I may just be a smooth brain though, lol.

@@savagegentleman3583 one sec, let me check again.

Yup

qvoreviews.com/how-to-zero-your-handgun-red-dot/

Watch Sage Dynamics and you'll be good with either one. Personally, I prefer the 509t window size better

really? I haven’t had an issue finding them. Got about 8 and ordered 2 more last week

@@Gh0st_____ please lmk where you are getting them!

@@swarbrickjesse local Gun shops and signing up for notifications online.

Got one from eurooptic. Between them and big Tex ordinance shouldn’t be a long wait for one to come in stock

@@JimneyCriquet I saw a European company had them in stock. How was the shipping?

16:30