The ULTIMATE ONE Performance Angle Grinder. Parkside Performance PPWSFA A1 vs. PWSAP E6 

Once you are done with cutting with this systwm you spend just as long looking at it trying to figure out how to turn it off. Don‘t fix what isn‘t broken Parkside…

Might be the reason why they abandoned the button.

@@BrokeLifeEU+1

Not too long. Every cut you see in the video I had about two attempts at. After that the batteries were down a bar. They were fully charged to begin with. And if having to use on of these on the last bar of battery they would not have as much power. So I‘d say about 15 cuts from this caliber and you drop a bar on the 8ah.

@@BrokeLifeEU damn, they have to invent a 15ah battery for this grinder🤣

Haha, would be too heavy. As if they used the puch type cells the batteries would be too expensive. But an 8Ah is honestly fine as long as you have too and won‘t be grinding for the entire day. In that case just use corded.

​​​@@BrokeLifeEUA 12ah would be fine, it isn't as if it would run a lot of cuts anyway for the weight to matter, which weight tbh wouldn't be half as much as the 8ah since the weight is not increasing quite linearly with the number of cells. Heck personally I wouldn't have a problem with a 15ah either since I never run Li batteries of any brand bellow 1 bar. As soon as 1 bar pops it's time for battery switch or taking a break/doing something else, except if I really have to finish this particular job right now. Btw some named top brand do have 10ah+ batteries too.

Spot on, the A2 is even better than the A1. Quieter as well as more powerful.

PWSAP 20Li D4 = speed select feature and actual physical button = best way to do an angle grinder!

I had D4, died after few hours. I used about 1mm of cutting wheel when electronics burned. D4 is not available in CZ too. These new membrane switches are No-Go.

@thePavuk I just got a D4 for a future video I hope it lasts 😅

I did test them, but did not include the footage in the video as it was not good. I hope I have not deleted it. I will try and find it and will let you know!

I have never connected these batteries to an app. I dont like the tool and app combo. I just like to use them as they come. So both on default setting. They have no more than 10 cycles each.

I did want to test their limits sort of. There is a huge RPM difference but in my hands they felt identical in terms of cutting and grinding power. In terms of stalling it was also pretty much the same. On sale for €50 if you have 8Ah batteries lying around they should be alright. Can‘t compare with a corded though!

It feels unsafe to use without a proper switch. Difficult to switch on and even more difficult to switch off as you are avoiding the spinning disc bit.

Thank you for the idea! I will try to make it happen!

Basically yes 😂

You are most welcome! I hope you enjoyed the video and the channel!

Din aplicație activezi treapta 6

Ai nevoie și de o baterie de 8 Ah. Cu 4Ah nu va exista viteza 6.

​@@BrokeLifeEUu mnie na 4 ah wszystkie biegi działają 😊

Thank you! Yes, on speed 6 you need an 8Ah battery in order to use it fully. And run time is a big plus on the 8Ah battery. I feel the 4Ah batteries lose a bar as soon as they are on the tool. In any case an angle geinder is a very power thirsty tool so at 4Ah you won‘t get too much done, but if you have multiple 4Ah they should be enough for smaller jobs.

Cześć😊 wczoraj kupiłem mimo oglądanych testów model e6 i mam baterie smart. Na filmach ludzie pokazywali że urządzenie zatrzymuje się przy malutkim nacisku i że nie nadaje się to do cięcia grubych rzeczy. Dzisiaj zrobiłem test na 4ah smart i uciąłem 10x pręt gwintowany fi 10 oraz pręt stalowy fi 14 uciąłem 2x. Po tym wskaźnik przeskoczył z 3 na 2 kreski baterii ale byłem zdziwiony bo nie zatrzymała się na tym ani razu🤔. Gdyby tylko była bez awaryjna to sprzęt pierwsza klasa jak na bakteryjne urządzenie czasami coś uciąć. Kupiłem w lokalnym Lidlu a na polskim allegro model ma same pozytywne opinie i nie wiem dlaczego na sklepie Lidla dużo osób narzeka że słabe może widocznie zależy jak się trafi. Ale no nie chwalę dnia... Wolałbym jedynie mechaniczny włącznik. U mnie na 4ah wszystkie prędkości łącznie z 5 i 6 działają poprawnie 🤔

Cześć! Gratulacje! Bardzo miło to słyszeć! Dla mnie potrzeba trochę presji, żeby się zatrzymać. Bez ciśnienia lub z małym naciskiem jest ok. Ale jeśli je popchnę, E6 zatrzymuje się przed A1. Ale nie ma różnicy w prędkości 5 i 6, jeśli używam 4Ah. Tylko jeśli użyję 8Ah. Dziękuję za podzielenie się swoimi doświadczeniami! Życzę wszystkiego najlepszego z nowym narzędziem!

@@BrokeLifeEU jeśli masz baterie smart ustaw w nich prąd rozładowania na 2.8 v bo jest fabrycznie 2.5 podobno to je zabija ja od razu tak ustawiłem

​@@marcingyver9839Cześć, u mnie nie widzę różnicy między 5 a 6 biegiem nawet po zmianie na 2.8v.

Thank you so much! It means s lot to read that you like the videos. I keeps me going and trying for bigger and better things! Some of the tools are not my own (Parkside tools). The ones from Aliexpress I buy and keep, because there is no other way to get them. After the tests I keep them just in case I come up with a new idea for the future. I do borrow tools from friends, especially for the comparison tests. In most cases they are in denial if the tool they have is not the better one. I would be the same if I were in their place. However none of us use the tools for any professional sort of use we are all the DIY sort of people so in most cases if it does the job it is good enough.

@@BrokeLifeEU Great that you can borrow the tools from friends! 🙏🏻 The Performanve series seems very good, i would say perfect for the DIY! And also i like how their tools look, not important, but an extra bonus! I live in Sweden and we cant shop parkside online from Lidl, so we have to wait for new inventory in the stores, sometimes its weeks in between until there is something intresting to buy! :/ Anyhow, glad for tve video! When i find the performance angle grinder i think i want to buy it (i collect tools, its silly but ones gotta have a hobby) but it will probably take forever until its in the shops! 😅 Have a nice day! Today im doing the impact conversion, parts finally arrived! 🙏🏻

Glad to hear the parts arrived finally! I hope the conversion goes well! And spot on I think that is the best way to think of Parkside tools that they are DIY. Snd as a matter of fact budget DIY. So in that bracket they are mostly good enough.