No video :(

There's a New Timber in Town - FIRST FLIGHTS w/ FMS Kingfisher 1.4m

Подписаться 111 тыс.

Просмотров 23 тыс.

50% 1

The Kingfisher is faster than a Timber, rolls and pitches better, and flies slower than a Timber can. Not that Timbers are bad - we love ours - but lightly loaded bush wings? Sign us up. If you want one for yourself, consider getting it via bit.ly/FMSKing... at no additional cost to yourself.
Check out Hangar 18 Hobbies, our local hobby shop! I'm proud to be their demo pilot.
www.hangar18hob...
/ hangar18hobbies
/ hangar18hobbies
/ hangar18hobbies
🙋‍♂️Connect With Us On Social
⌛ Tiktok: / jonsynrc
📷 Instagram: / twobrosrc
📷🙋‍♂️: / dirtnapz_rc
📦 Products We Recommend
Receivers:
Spektrum AR10360T Receiver: bit.ly/3SuAlPv
Spektrum AR8360T Receiver: bit.ly/3QBdgtc
Spektrum AR637T Receiver: bit.ly/3dCjiuO
Transmitters:
IX20SE: bit.ly/3BI3eBD
IX20: bit.ly/3BQvB0u
NX10: bit.ly/3Qm6BSR
NX8: bit.ly/3bA4dcA
NX6:
Servos:
AGFRC B13DLM: tinyurl.com/B1...
AGFRC B11DLS: tinyurl.com/B1...
Hitec HS-85MGs:
Batteries:
4s 30c 2200 Smart packs: bit.ly/3SsoUrB
4s 50c 2200 Smart packs: bit.ly/3dcdBU3
6s 50c 5000 Smart packs: bit.ly/3A0jVY2
6s 50c 4000 Smart packs: bit.ly/3JANxOL
#rc #aviation #rcplane
Music: "Round 1, Round Two, Misty, Blue Hour v3.0, Cinematosis, Solar Plex, La Única, Glowtalk, Tubshop, Summereyes" by Birocratic (birocratic.lnk....)
horizon hobby products, turbo timber, timber, rc planes, rc plane, e-flite turbo timber, e-flite timber, eflite, eflite turbo timber, eflite timber, e-flite night flyer, eflite night flyer, safe select, horizon hobby, bnf basic, remote control, radio control, rc airplanes, ix20se spektrum, ix20se, as3x technology, rc airplane, smart plane, 3d flying, timber propeller, float flying, rc float plane, float plane, rc float flying, turbo timber 1.5m
0:00 Introduction & Kingfisher Overview
2:12 Jon's Takeoff (Spektrum 4s 2200 30c)
3:21 First Landing
3:58 Second Takeoff
5:07 Second Landing
5:40 Tailwheel Takeoff & Torque Rolls
6:44 Flat Spin
7:26 Slow Flight Performance
7:58 Harrier Performance
8:46 Knife Edge Spin
9:11 Third Landing
9:55 Ciarán's Takeoff
11:00 Power-off Stall Testing
11:54 Kingfisher Features & Timber Comparison
13:22 Mid-flight Thoughts & Landing
15:07 Ciarán's Landing & Thoughts
16:12 We Don't Sell Out
16:54 Jon's Takeoff & Stall Testing
17:30 Inverted Harrier Performance
18:08 Knife Edge & KE Circles
18:38 Grass Landing & Close Call
19:46 Slow Rolls
20:30 Hands-off Grass Landing & Thoughts
22:25 JonScore & Review

Опубликовано:

14 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 150

@ModelAV8RChannel Год назад

Jon you may have just sold me on one of these. I've often wondered how it was. A set of Timber tires would fix er right up. I like that it comes with floats...I'd love to see you fly it off a lake. I have been flying a buddies Timber EVO on floats and now I want a float plane. Good price too. Looks a little like a Cessna 185. I like that it has struts...looks more "authentic". Nice review...well done. Also...one thing. Just an observation and my personal opinion. Not gospel, just something to think about. It's not necessary for you to keep saying how honest you are and how much integrity you have. Your passion for the hobby, objectivity, personal style, and honesty about it all are obvious. I know why you do it. There are those that (stupidly I might add) automatically assume anyone that gets airplanes for free will lie to keep the stream of free stuff coming in. Its like automatically lumping people in a specific group because of who they vote for, with no consideration for the endless number of possible caveats and differences that make an individual who they are. It's just a narrow minded way to see people. Jon anyone that watches your content or mine...I mean REALLY watches, and listens to the words we are saying...will know how we roll. The people that assume, and don't listen enough to pick up on the obvious objectivity, passion, and honesty...well that is their problem, and it doesn't really matter what you tell them. Their narrow mind is made up before the first word is spoken anyway. Like you...I sometimes almost feel bad if I really like a plane. It's as if I feel like I HAVE to find a negative...and its because of the people I spoke of we think that. Well I'm done worrying about that. We all know there are "cheerleader channels", and those are painfully obvious as well. We aren't that...and our loyal subscribers that pay attention all know that. Jon integrity shows in the way a man carries himself. Its never proven with words...only actions. I'll never say how honest I am on my channel. I don't have to. Its obvious to anyone that actually pays attention and has watched more than 3 videos of mine. You are a good man Jon, and it shows. You owe the narrow minded RC Karens nothing. Have the confidence to just be you, and know this brother...that is more than enough.

@TwoBrosRC Год назад

Thanks so much for the kind words Adam. We'll probably lay off saying "this is our honest feedback" in the future because we'd like to think that the enthusiasm comes through from how we fly these models, not because they were sent to us. This wasn't even on our radar until FMS asked us to review it. We realized quickly that it's a gem of a model - like a Timber but weighs less and is almost as aerobatic. We'll be reviewing it on floats for its final review, and will probably keep making content with it as long as it survives the goofy antics we're up to. Unfortunately, Timber wheels don't fit - you'd have to drill them to make them fit.

@shortbiggie Год назад

I put the spongy Durafly Tundra tires on my Kingfisher. I think the inflatable tires XFly has on a couple of their planes like the Tasman would be great on several planes if they were ever in stock. They look lighter than Dubro.

@old-rcplane-phart Год назад

Includes snow ski's too😁

@airhammer6203 Год назад

AV8R!! 👍👍

@old-rcplane-phart Год назад

YOU will love it Adam! This kingfisher WILL DO some crazy stuff in the air! Unfortunately, flaps go only down. PLUS, it will tow a 2 1/2 meter glider out of site!

@steveblackbird 11 месяцев назад

As someone that's been flying RC for about 30 years now, I'll say I absolutely love the channel, and love all the fantastic new products over the last couple of years. Foam, whether it's EPS or EPO etc has come such a long way, much like batteries and power systems. 30 years ago electric was primative and underpowered. Was 99% nitro powered when I started. Even ducted fans..remember the big .90's with the massive tuned pipes? I discovered bush planes a few years ago with the Durafly Tundra and absolutely love the thing. Such a slow gentle flyer but will perform nearly every trick in the book out of the box. The FMS Kingfisher looks like another step up with the wing design but absolutely needs better gear and softer tires.. The one thing I upgraded on the Tundra...big squishy tires...Makes all the difference.

@ShadowOppsRC Год назад

Have a kingfisher myself and they take a beating and keep on ticking! Great first bird and very tame flier! I put some squishy tires on mine and helps a lot.

@shortbiggie Год назад

I loved this plane while I had it. I lost signal and into the oaks she went. It was a blast on snow skis. The landing gear with skis attached retrofit nicely on my arrows Bigfoot.

@crash_gordon Год назад

One more reason to love this plane is the threaded inserts on the bottom for the floats. They're perfect for any payload you want to attach. I've 3d printed a bunch of stuff like a candy drop, a glider tow release, a head tracking FPV system, and even a fake smoke system. The manual says it's a 3S plane, but I run mine on 4S with the stock ESC, and I've had no issues. And yeah, pretty much every pavement landing skids exactly like yours. :)

@govsux1 Год назад

Over the 50 year span of me flying RC if I had a dime for every plane that said, "Sporty enough for maneuvers yet docile enough to be a trainer" I'd be rich!!! Well... hell might have froze over here I was very impressed with your review which sure seemed to show that the design honestly does both. Most trainers suck at inverted flight and as such you cannot practice some more advanced flying without risking a crash. I'm sure some of the footage here is a testament to your very good flying skills [ bravo my friend!! ] none the less if ever you wanted a plane that you could practice some advanced techniques yet have a very slow flying and very predictable plane to bail you out of a less than ideal situation this might be one of the best I've ever seen.

@TwoBrosRC Год назад

Wait until you see it on floats soon!

@adamrodgers2377 Год назад

Looks like I am going to have to get another Bush Plane 🤣 thanks for the awesome review! 🤙🏼

@clipperrail8988 Год назад

After learning the basics on a very forgiving little ZT Cub, I purchased a Kingfisher and this has pretty much taught me to fly. It's forgiving, straightforward to fly, not too big and those wheels mean I can fly from grass in my local park. I've smashed it a few times and it was easy to repair. The only poor design aspect are where the wing struts join the body - the mount is plastic, easily broken in a hard smash and the part cannot be replaced. With a bit of creativity you can repair it though. 10mins flying time per 3S pack. 3 years later it's now teaching me aerobatics. Can only speak from personal experience, but it's been a great little aircraft for me and I've enjoyed many happy hours flying it. Great to see it's available.

@TwoBrosRC Год назад

Good to hear! We enjoy it more as a bush plane that can do 3D aerobatics, but that's what's nice about it - the model is capable of a lot more than it seems.

@clipperrail8988 Год назад

@@TwoBrosRC If you're in contact with FMS - mention those plastic connection points for the struts - I've seen a few mentions of this being a real weak point on the Kingfisher. They really should be separate removable parts that can be replaced - or made of metal.

@TwoBrosRC Год назад

@@clipperrail8988 Ours failed pulling like 10 Gs but it was a simple fix, just hooked it back up and glued it with a bunch of CA after roughing up the two surfaces with sandpaper to give it more surface area.

@clipperrail8988 Год назад

@@TwoBrosRC Well that's one impressive way to break the mount! I broke mine in the more shameful tried-and-tested fashion of crashing the aircraft. I went for a metal fix - drilled a hole and used a screw-in curtain eye of a similar diameter. It seems pretty secure, but hasn't been exposed to 10g yet. I'll keep working on those aerobatics.

@old-rcplane-phart Год назад

The more u use the foam tires ON grass, they do/will get softer. My 1st 1, took 2 months of going 1 or 2x a week, 2 to 4 4s/2700 smart packs per flight.

@TwoBrosRC Год назад

That's typical of FMS wheels in our experiences.

@user-rx8qq8sk9ydv1ce5ib 5 месяцев назад

Thank you as always for the tips. It must be difficult to flying these airplanes after flying the jets 🤩

@old-rcplane-phart Год назад

After a year, I upped to an avian 60a esc, 13x5 wood prop, & maxed out all travel. It flies almost identical to my nite x. Esc IS 6s capable, & I wanna try a 6s. Some day😁. WE fms groupies almost have YOU hooked!🤪😜

@old-rcplane-phart Год назад

BE sure to keep check on the 2 wing attachment buttons! The way WE fly, hi G, etc CAN loosen those 2 buttons.

@TwoBrosRC Год назад

You know we've always enjoyed FMS with the exception of the A-10 70mm v1? And even that wasn't too horrible, it just had a lot of weird quirks.

@3DMOFO2020 8 месяцев назад

Looks like a fun plane Jon both you and your camera man did a wonderful job on your flights👍👍😎👍👍BTW Maybe a 12x6 APC prop would improve your hovers some?

@tennriverluver3534 Год назад

I'll keep my Night Timber Xs thank you.

@TwoBrosRC Год назад

You're definitely missing out on this one.

@crystalbusenitz5426 5 месяцев назад

Love your reviews so Honest about your opinion unlike the RC sailors

@airhammer6203 Год назад

Great video!! Watched twice. I've got the NTX but I may just have to get this one before digging into it. I've noticed this plane before and thought, lots of extras but I don't know. Now, after seeing how well it fly's, I'm thinking I really like this one. Great flying guys, good stuff. AirHammer out!!

@TwoBrosRC Год назад

Thanks man! We're sure you'll really enjoy it. If you want to push the limits completely and never worry about it, you can pull the servos and replace them with metal geared units for a minimal weight gain but total peace of mind. We may also mod the flaps and set it up for full span ailerons at some point instead of crow, but we'll see.

@airhammer6203 Год назад

@@TwoBrosRC when it comes to the flaps, that's exactly what I was thinking you'd do... eventually. If I get it, I will. MG servos too. Hope to see that video.

@Swimfinz Год назад

cool review, very nice! Keep up the fine reviews!

@ArthurRC Год назад

That's a very good trainer except that hard gear/wheels 😔 But yeah it looks very easy and fun !!! Nice review my man !

@jive7777 Год назад

Great job guys! You sold me on it. It will be here tomorrow. My first FMS model. I just have a couple quick questions, if you don't mind. I have an AR631 that I will be using. Can I just pop that in and take out the Reflex unit, and set it up like a regular E-flite model? Also, what gains did you set the AS3X at? I looked for a receiver setup file from Spektrum for the Kingfisher, but was unable to find one. Thanks guys, and keep up the excellent work!

@TwoBrosRC Год назад

Glad to hear it! Our settings are 2x gains overall with 35% roll, 65% pitch, and 20% yaw. Experiment to find what works best for you. Remove the Reflex gyro and attach an AS3X receiver - you'll take a bit of weight out of the airframe too.

@jive7777 Год назад

@@TwoBrosRC Perfect! Thank you, I really appreciate the help!

@christoffelbosch9224 15 дней назад

Great review just curious what you’d recommend as a bush plane between this and the pa-18 1300mm. I’m a intermediate pilot but looking for the closest thing to a fun cub due to lack of stock cheers

@TwoBrosRC 15 дней назад

Kingfisher is a pretty good choice. It's more durable than the Super Cub and replacement parts should be less expensive overall.

@christoffelbosch9224 15 дней назад

@@TwoBrosRC thought that’ll be the case, thank you for the speedy reply. Love the channel all the way in Australia 🦘

@jacksampson7711 10 месяцев назад

The timber killer is the FMS PA-18.

@TwoBrosRC 10 месяцев назад

Depends on which one you're talking about, and what kind of flying you're looking to do.

@sergioarmartinho Год назад

hi, thanks for all videos, i really like watch all. I have a question about FMS Kingfisher, can i use 4S 3300mah on these plane this stock motor and ESC? if not, what do you recommend for esc or motor? Thanks again for show to us about these planes. keep doing please!

@TwoBrosRC Год назад

A 3300 pack probably won't fit into it. We'd recommend sticking to 2200.

@sergioarmartinho Год назад

@@TwoBrosRC thanks for help!

@redbeardreviewsrc Год назад

Mad respect to you guys! You are makin a name for yourselves. Congrats on that Rafale short, that was good stuff! I have a small channel myself, ANY advice you could give would be greatly appreciated!

@TwoBrosRC Год назад

Thanks man! How you want to run your channel is ultimately your call, but what we'd suggest doing is aiming for the highest quality bar you can reach and consistently trying to jump over that bar with every upload. Even Shorts. Especially Shorts. So many channels make the mistake of posting Shorts with the model flying off-screen and people lose interest. Our Shorts are hand-edited to ensure the aircraft stays in frame, not just clips of full length video from our channel. We try to post engaging or interesting content, more than just basic flying. Attention spans are shorter. Even in long form video, cut the content and get to the point. Make it flow tightly. We're still improving our format to take our own suggestions into consideration, but the better your videos are the more your channel will grow. Thumbnails and titles are everything, too. Easily readable titles with good graphic design practices will outperform content from similar channels because people will see the thumbnail and want to open the video. Feel free to ask any other questions, we're happy to help. The algorithm promotes RC flying more if the channels posting content are consistently performing well. The better you do, the better we do.

@redbeardreviewsrc Год назад

@@TwoBrosRC Roger that! I really appreciate your response and advise! Do you have any suggestions for getting people who view to subscribe? Also, did you reach out to companies to review their products, or did they see your content and reach out to you? Thanks again for your time! Happy flying!

@TwoBrosRC Год назад

@@redbeardreviewsrc We reached out to FMS, Horizon, and SMC to rep their products. 5280RC and KMRC Model reached out to us. People subscribe because they like your content. We suggest that you not make your channel into one of those cringey channels that say "like and subscribe" constantly. It doesn't grow your channel to demand attention. Good, engaging content gets attention.

@redbeardreviewsrc Год назад

@@TwoBrosRC Y'all are awesome! I appreciate the honesty and thank for taking the time to respond!

@wtfmimshag Год назад

Good stuff Jon. Now go and harrier it around in those woods.

@TwoBrosRC Год назад

That's next on the list.

@jeffoh5787 3 месяца назад

Were both of you flying on 150% rates? I just set mine up according to the manual, (roughly 16mm of travel).

@TwoBrosRC 3 месяца назад

Always.

@jeffoh5787 3 месяца назад

@TwoBrosRC I flew on full rates and almost crashed from what I assume was too much elevator. I was banking and then sudden and violent wing rock occurred. I'm assuming I just gave it too much elevator and it acted like a brake?

@jasperrrrrrrrrr_ 5 месяцев назад

How does the Kingfisher compare to the Durafly Tundra?

@TwoBrosRC 5 месяцев назад

We haven't flown it.

@stevenpaulin448 Год назад

Light seems to be an advantage when there's no wind. I live three hours east of you on the coast of NC where "no wind" isn't really a thing. How advanced of a pilot do you have to be to be able to appreciate the differences you observe? Would a TTE be more stable and easier to fly for a not-so-advanced flyer?

@TwoBrosRC Год назад

Fly a Timber and fly a Kingfisher. You'll notice immediately how floaty the Kingfisher is in comparison because it's lightly loaded whereas the Timber is not, and flies a bit more sluggishly as a result.

@looneytunes47 Год назад

id put the super soft big rubber pneumatic tires on it from the x-fly Tasman

@flyingwithfriendsrc3859 Год назад

Nice 👍

@shanehoule9477 Год назад

Nice plane I want one just destroyed my turbo timberumx got a little cocky lol hit the wood pile

@mickydee6550 Год назад

Which do you prefer, the Kingfisher 1400 or the FMS Super Cub (smaller version) ? Any concerns over the strut attachment points on the Kingfisher? I’ve read on RC Groups about the plastic strut attachment points breaking. Thanks!

@TwoBrosRC Год назад

The Super Cub is more enjoyable, but not by much. The only time we broke a strut on the Kingfisher was because we made the airframe over-G by doing tight horizontal loops at full throttle. The strut was easy to fix - we just sandpapered the inside of the sleeve and the part that slots into it to give it more surface area, then hit it with Gorilla Glue. It's stronger than it was stock now.

@AviationAngler Год назад

I'm definitely gonna have to fix mine now I kinda wanna try that flat spin maneuver lol it is definitely a lot of fun to fly I might try to up my throws this time

@TwoBrosRC Год назад

We fly on 150% rates if that helps, with pushrods set to outermost servo arms and innermost control horns.

@AviationAngler Год назад

@@TwoBrosRC alright thanks as soon as I get home I'm getting my parts on order lol I've always to tow either a glider or a banner behind it as I know there's a hook on there have you tried anything like that?

@TwoBrosRC Год назад

@@AviationAngler Nah, that's not something we really do.

@AviationAngler Год назад

@@TwoBrosRC alright another thing is I've heard a lot of people replace the tires for something with more give like the durfly tundra tires to make it easier to taxi on grass cause the tires a pretty stiff

@deandallmann4464 Год назад

I got this plane and I'm using the recommended 11.1v 3s 100c 5000 mAh battery. The problem is the center wire on the battery plug prevents in from plugging in more than about 1/16th off an in. Is there an adapter or am I missing something?. I've looked HH website and didn't find one. I also contacted their product support team but never heard back. Any suggestions?

@TwoBrosRC Год назад

Center wire?

@rolandpage8930 4 месяца назад

Like you guys, what's with the picking on timbeŕ?

@TwoBrosRC 4 месяца назад

We don't recall picking on it.

@joegroves2517 Год назад

This looks like a fun plane, though I'm probably going to be flying my TTE for a long time. Curious though just how hard you have to push your plane for metal gear servos to be important. You mention it a lot but so far at least with the TTE and Ultrix, and my trainer Carbon Cub I haven't had any problems, though I'm mostly just working on getting 4-point rolls and smoother landings down.

@TwoBrosRC Год назад

Put a model into a crazy snap roll at 11g and you'll find that most plastic servos can't handle the load without stripping.

@joegroves2517 Год назад

@@TwoBrosRC Thanks, guess it's time to start figuring out that telemetry then and see how close I am to something like that.

@ernestostrman5147 10 месяцев назад

Jon i wanna buy either Kingfisher or Maule(i have PA18). How would you compare them in short and which one would you pick. Water operations are not important to me. One that flies/lands slower is one i would prefere.Thank you very much!

@TwoBrosRC 10 месяцев назад

The Maule is a more stable aircraft and has more acro potential than Kingfisher does, along with being easy to fly slower on a 3 cell pack. Check out our vid on it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dYIeZ1cnNfk.html

@ernestostrman5147 10 месяцев назад

@@TwoBrosRC thanks for reply. I still cant decide between Timber Evo, Kingfisher or Maule. Which one by your oppinion has toughest landing gear? On PA18 landing gear is like a tank.😁

@TwoBrosRC 10 месяцев назад

The Timber has the better gear out of all three options.

@ernestostrman5147 10 месяцев назад

@@TwoBrosRC then Timber it is. Thank you Jon!

@DuneDaddyO 2 месяца назад

@@TwoBrosRC I have been looking at numerous videos trying to decide on Maule vs Kingfisher vs Super Cub 1.3 or 1.7 and given they are priced so similar, the Maule's clear windows, attractive to me teal paint scheme vs cartoon livery of the Kingfisher and the 4S capability and wide wheel stance make the Maule the choice for me. I think the battery compartment is better and easier to fit my fat digits into as well.

@ryanlentell1307 Год назад

I've been look for a smaller jet like a 70mm that's pretty agile with pretty tough gear because i fly of very bumpy matt or grass . Wondering what you would recommend, I was look at the freewing 70mm f35..

@TwoBrosRC Год назад

Not only no, but *hell no* on the 70mm F-35. It won't survive grass. While it'll be agile, it'll get messed up flying off grass. For a 70mm jet that's grass-capable, you might want to look into the Viper 70mm if there's still any around you that you can pick up.

@memcrew1 Год назад

Habu

@sanders457 Год назад

Hey, great video! If I wanted to upgrade the propeller for this what size would you recommend?

@TwoBrosRC Год назад

12x6 or 13x5 would be good choices, but you'd probably want to upgrade the motor too. That would require some research. It's already quite powerful in stock form though.

@sanders457 Год назад

@@TwoBrosRC thank you!

@cwwisk Год назад

A hair of crow would seriously do some cool stuff.

@TwoBrosRC Год назад

It's totally set up for crow already - but we forgot to use it because it was just so much fun to fly that it never even crossed our minds. We'll show that off on the float flying vid with it in the final review!

@keveshannaidoo5670 Год назад

Hi can you do a video on ithe xfly Tasman?

@TwoBrosRC Год назад

We're trying to avoid buying models if at all possible, so unless XFly sends it to us you probably won't see it this year.

@alexherrera3918 Год назад

Great review ( I am new subscriber from TX) . I am a beginner I really want to fly on of this but I feel that I need a plane a bit smaller (excluding the UMx timber). Do you have any recommendations?

@TwoBrosRC Год назад

You'd find it easier to fly with something larger like this because smaller wingspan models (sub 1m wingspan) tend to be twitchty and jittery in the sky.

@paulfletcher2305 Год назад

On the website it does not show it having flaps, it also only shows 3s and 4 channel. You changed the speed controller. How did you add the flaps or was yours a newer version?

@TwoBrosRC Год назад

What website are you looking at? The link in our description goes to FMSHobby.com (bit.ly/FMSKingfisher) which says "FMS 1400mm Kingfisher PNP w/Reflex V2, Wheels, Floats, Skis, *Flaps*". It does recommend a 3s pack, but the motor can take 4s as it's the same motor that the E-flite RV-7 uses - FMS makes that model, too. We actually used the RV-7's ESC in our Kingfisher to give it more pep and run 4s without worry.

@Tallguysrc Год назад

Looks like it flys like the Valiant

@TwoBrosRC Год назад

Seems similar.

@edwardenglishteacherrcpilo7235 Год назад

I wonder 💭🤷🏻‍♂️ how to glue Neodymium on Rc Jets bec I want to transport a few parts of my jets while driving to the Airfield / Airclub

@TwoBrosRC Год назад

CA glue will work.

@foxprogt 4 месяца назад

You say "this isnt a Fun Cub" but do you even have a review of the Fun Cub? I looked through your videos and didn't see one. Maybe i missed it.

@TwoBrosRC 4 месяца назад

We've flown a Fun Cub before which is why we mentioned that. We do own one now and are in the process of filming it for an upcoming vid.

@jeffoh5787 Год назад

So which Bush plane is a 10/10 in your opinion?

@TwoBrosRC Год назад

None so far, but we suspect the Funcub would be the best just based on watching Zach & Ben fly it and the few minutes Jon was able to fly it with Z&B.

@looneytunes47 Год назад

Ive had 2 Timbers and everybody goes gaga over them but compared to my X-Fly Tasman 1.5mm i consider them a Turds by comparison and i bet this Kingfisher is a better plane as well..

@TwoBrosRC Год назад

We'd have to take a Tasman up to compare it. Timbers fill a very unique niche that few other airplanes can match in our experiences.

@looneytunes47 Год назад

@@TwoBrosRC Yes i agree with you there on that....The X-FLY Tasman comes in at a very affordable price at $229 delivered via banana hobby! i think youd be impressed by the Plane Jon

@jonasbaine3538 Год назад

Those struts are not load bearing right?

@TwoBrosRC Год назад

They do take loads, they just don't bend much.

@cwwisk Год назад

Some Bison wheels.

@TheSlickpt 4 месяца назад

I thought this was a 3s plane ?

@TwoBrosRC 4 месяца назад

It can be flown on 4 cells.

@amberring77 Год назад

Are u flying with a stock ESC ...running 4S ?

@TwoBrosRC Год назад

Avian 45a flying 4s. Stock is a Predator 40a which can take 4s.

@amberring77 Год назад

@@TwoBrosRC cool good to know have only flew mine on 3s ...and i like it but on 4s ill definatly like it more .good plane,u can fly anywhere u want .thanks for the quick response....love ur videos

@ronnymiller7395 Год назад

What’s that twin motor plane hiding in the grass at 3:50?

@TwoBrosRC Год назад

Ciáran's custom painted EC-1500

@ronnymiller7395 Год назад

Ah man I’m jealous. I really want one of those. Any recommendations on the most fun twin? I’ve been looking at the Beechcraft and tigercat but that ones backordered… as well as flight line makes a tiger cat and also a ov-10.

@TwoBrosRC Год назад

@@ronnymiller7395 The Beech D18 is pretty solid. Not as fun as the EC-1500 for us yet, but we'll keep pushing it. Check our review on it that dropped last week. If you like what you see, consider ordering it from the links in the description!

@Krash_fpv Год назад

Def looks better than a timber exo but idk bout the timber x

@TwoBrosRC Год назад

Ehhhh. The Timber X is even more wing loaded than the normal Timber. It's not a very good 3D plane.

@kennyirish5021 Год назад

Wow already discontinued?!?!

@TwoBrosRC Год назад

The Kingfisher is sold out, not discontinued.

@kennyirish5021 Год назад

@@TwoBrosRC sold out on FMS and discontinued at horizon? I am looking for a sim system now haha at horizon thanks

@chrisdavis3642 Год назад

Well ok.. I mean I get it.. but I'm almost convinced that ya might be able to gosel it up two flights of stairs then politely ask a Lady to open the door.then down the hall a minute landed to a stop at my room with a timber.. not going to complain about the p-39 either..

@TwoBrosRC Год назад

We're not quite sure exactly how to interpret this message.

@cnsrcandotherprojects4557 Год назад

@@TwoBrosRC I think he’s asking for your timber

@old-rcplane-phart Год назад

@@cnsrcandotherprojects4557 They're readily available to BUY anywhere 🤷‍♂️

@robieosborne7369 Год назад

He's speaking English but I know he's trying to say something :0

@chrisdavis3642 Год назад

@@robieosborne7369 ok Robbie I apologize. The game is 3-D your bird to your room in a hotel. It takes a little practice.

@stevelaw274 6 месяцев назад

Interesting and useful to this beginner....but that canned "music" in the background is hugely intrusive and irritating....spoils an otherwise excellent video (imho)

@TwoBrosRC 6 месяцев назад

There's no pleasing everyone.