These Motors Were SURPRISINGLY Good | T-Motor P1604 3" Freestyle Motor Test

Подписаться 4,6 тыс.

Просмотров 3,4 тыс.

50% 1

These new 1604 motors from T-Motor have just over 30% more stator volume than the 1404 motors I've been running on all my sub-250 gram builds for over four years! But, remember, there is no free lunch...
Tested with:
Quadmula Siren F3 Split
iFlight SucceX-D F7 Mini Flight Stack
HQ T3x3x3 Props
DJI O3 System (Lightened & Mutilated)
TBS Tango 2 Pro (Internal ELRS)
GNB 4s 650mAh LiHV
=========================
Items suggested in this video
=========================
My Favorite Screwdrivers (Wiha Slotted & Phillips):
Amazon US: amzn.to/3tq15Eu
Amazon Canada: amzn.to/3E1Ph02
DJI Goggles 2 Integra:
Amazon US: amzn.to/40DmrND
Amazon Canada: amzn.to/3Kdzd0y
GetFPV: bit.ly/40IFvux
DJI Goggles 2:
GetFPV: bit.ly/41M3AkY
DJI O3 Air Unit:
Amazon US: amzn.to/3WZnupK
Amazon Canada: amzn.to/3jJszUR
GetFPV: bit.ly/3ioEE1s
T-Motor P1604 3800kv Motor:
GetFPV: bit.ly/49sIYCL
============================
Videos you may want to check out
============================
A BETTER way to quad PID tuning? | My experience with PIDToolBox!
• A BETTER way to quad P...
Could This Be My NEW SUB 250 Gram 3" HD Freestyle Frame? | Quadmula Siren F3 Split & DJI O3 Air Unit
• Could This Be My NEW S...
#djifpv #fpv #drones
Mandatory Disclaimer: I participant in the Amazon Services LLC Associates Program, which is an affiliate advertising program designed to provide a means to earn fees by linking to Amazon.com and affiliated sites. Item suggestion links above are affiliate links and I will receive compensation if you choose to use them. There is no cost to you to use these links and any compensation received goes right back into the channel.

Наука

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@michaelwilson3946 8 месяцев назад

I put these on a sub 250g 3.5. Nice motors

@Mangorille 8 месяцев назад

That's a good use for them. I'm building a 3.5 with 1404 motors right now.

@michaelwilson3946 8 месяцев назад

@Mangorille I currently have them on the pirat lil matey. I have a 3 to 3.5" frame I designed that I plan on switching them to. That frame is not published yet but similar to the f3. I have published a 5" the skelter5 v2.

@FPVMonk 8 месяцев назад

I'm running the sf3 with 1507 motors from tmotor. I think it flies really well with HDzero.

@Mangorille 8 месяцев назад

Those are 15g motors, too heavy for my goal of having to stay under 250g. Why not go with a t mount style? Yu can save at least 15 grams right there.

@TorontoFPV 8 месяцев назад

i like the tmount more than the bolts

@Mangorille 8 месяцев назад

For smaller motors and quads, me too!

@Deathdezine 8 месяцев назад

These motors fly great on my grinderino. Just wish they were more durrable. They just dont take crashes well. The inner motor shaft is very small and bends easy in minor crashes, And cant really bend em back cuz they snap. On top of that tmotor wont sell bells seprate. So now i got 8 paperweight stators. Haha.

@Mangorille 8 месяцев назад

Unfortunately I think that's these smaller lighter motors in general. The 1404 and 1604 both have 2mm internal shafts with a 1.5mm pin for the props. Only so much that shaft can take.

@Deathdezine 8 месяцев назад

Yeah your right😢 i really liked these motors too. Fly great and had good flight time.

@Mangorille 8 месяцев назад

@@Deathdezine Exactly, I've had to replace a few 1404 motors over the years, they develop a vibration after a few good crashes. Nature of the beast I suppose.

@portersky 2 месяца назад

Hi, can you do a betaflight setup tutorial a tuning guide.

@Mangorille 2 месяца назад

Check out Joshua Bardwell, he has a bunch of setup tutorials for betaflight. Tuning wise, I use PIDToolBox: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dnVW6agh_u4.html

@CostaFPV 8 месяцев назад

Dude, I am using 1804 from tmotor (I belive is new as this 1604), pretty good motor ❤ My gig is 3.5" 4s

@Mangorille 8 месяцев назад

Whoa, 1804 seems massive! :) I'm working on a 3.5" build right now with 4s and I'm running the 1404 on it.

@chrisbee5481 8 месяцев назад

Which 3.5" frame are you guys using?

@CostaFPV 8 месяцев назад

@@chrisbee5481 axisflying manta 3.5"

@William_NS 8 месяцев назад

Yes Sir! These are the motors I have on my Siren F3 split as well! They are fantastic! The only thing I didn't like was the T-mount, so I was going to switch to the 1804s with the 5mm shaft. Then I built a squirt with the T Motor 1507s that have a 5mm shaft. It is very difficult to change props because you can't get a good grip on the motors without slicing your fingers, so I gained a new appreciation for my old T-mount! Lol! Maybe the 18mm bell would be easier to grip than the 15mm bell, but for now, I'm sticking with the 1604s! I love my Pacer 1604s I know you're gonna love yours! Murders runs these on his F3 as well. Welcome to the 1604 club! 😂 🎉

@CostaFPV 8 месяцев назад

@@William_NS thats why I tried the 1804, M5 mounts

@v1.hattrick 8 месяцев назад

Gotta go with that 530 or the 380 HV for the lightweight feeling, which will in turn lower the amperage pulled as it wont be slugging as much weight.

@Mangorille 8 месяцев назад

I think the 530HV is the sweet spot for a lightweight 3 or 3.5". Only problem is that they're a bit hard to find where I'm located. I tried the 6s 650 and it gave me about 1-1.5 minutes more flight time than the 4s so I think the 530 should give similar if not slightly more flight time than a 4s setup.

@v1.hattrick 8 месяцев назад

I use the 530mah myself, getting close to 4 minutes of proxy freestyle (not many aggressive punches, a lot of aggressive turns). So the flight time is quite similar, the lack of voltage sag is where it really shines, along with the extra punch if/when you want it. @@Mangorille

@sketchpv3080 8 месяцев назад

I almost replaced my Brotherhobby 1504.5 motors with these 1604 but they use an odd 9x9mm mounting pattern that my 3” frame doesn’t accommodate.

@Mangorille 8 месяцев назад

Yup they are a 9x9 mounting pattern, same as the 1404 motors so great for me.

@herokme0 8 месяцев назад

did you have to run any motor output limit with these motors?

@Mangorille 8 месяцев назад

No, not on 4s.

@chrisbee5481 8 месяцев назад

Have you tried the DALprop T3028 ? Ciotty claims they are better than the hq 3x3x3.

@Mangorille 8 месяцев назад

I haven’t. I tried a few different Gemfan props and always come back to HQ. I’ll give anything a try if it’s sent to me but at this point my own money is set on HQs. :)

@William_NS 8 месяцев назад

I agree HQ props for the win! Although, I do really like the T-Motor 5143 props on my Siren F5 splits and F5 Split Mini.

@divingfalconfpv4602 4 месяца назад

@Mangorille alot of times I like gemfan. But HQ been for the win on certain prop sizes. My 3" runs HQ 3x3x3.

@divingfalconfpv4602 4 месяца назад

Thinking this 1604 for explorer long range

@Mangorille 4 месяца назад

What size and weight quad you looking at?

@divingfalconfpv4602 4 месяца назад

@@Mangorille well with the li-ion it's heavy. Quad right now is 175g with camera. Li-ion is 206g. I want to use triblades on my other drones they are more efficient at low throttles. Also on way home explorer is at 60% throttle in current configuration. Also curious is I could run 6s (li-ion might weigh too much for the skinny arms)

@55amps 7 месяцев назад

Can I use these motors for a 3.5” cinewhoop ? Using 1100mah 6s

@Mangorille 7 месяцев назад

That's a big battery. What's the all up ready to fly weight of the cinewhoop and what motor mounting hole pattern does it take?

@55amps 7 месяцев назад

@@Mangorille 9m or 12m on a 3.5 axis frame .

@Mangorille 7 месяцев назад

@@55amps Perfect. What about the all up weight of your quad? I'm already thinking you need a bigger motor based on your battery and I suspect you are going to run a GoPro as well?

@55amps 7 месяцев назад

@@Mangorille 297g without battery. I ran 2004 1750 kv but and it lack on power. Yes I will have my Gp 11

@Mangorille 7 месяцев назад

@@55amps You're in the right ball park with those motors, you could go a bit bigger but I wonder if you lack power because of your prop choice. What props you using?