Thickness Test: Sheet Metal - 1/2" w/ Harbor Freight Titanium 125 Welder 

1/2" with the Titanium!!

JUST SO YOU KNOW, YOU WERE MY WELDING TEACHER AND I MADE MY FIRST JOB BUILDING A 70FT FENCE SO THANK YOU VERY MUCH.

So glad I found your channel! I'm a small business owner and beginner welder at best. I realize this year I need to be able to fix my own equipment. Thank you for explaining things in a way that as a beginner I can actually understand and learn from .😊

Fun fact: must flux wire is rated for single pass only. You can do more than one and stack 'em, especially for practice, but the weld won't be as strong. You can find wire rated for multiple passes - Lincoln makes some - but of course it is more expensive. Always check the label.

Changing the ground clamp to a better one does wonders with this machine

A BIG BLACK EYE FOR HARBOR FREIGHT I have a Harbor freight TITANIUM FLUX 125 WELDER purchased from Harbor Freight a couple years ago. I am a retired plumbing contractor and backyard hobbyist. I love to build things in my spare time and help friends and neighbors that need something repaired. When I retired and closed my business, I had a stick welding machine but had no convenient place to connect it at my home! It would require an upgrade to my electrical service not worth the trouble and expense! When I saw a couple reviews on RU-vid for this Titanium 125 welder, I thought that would be the way to go. I already had a 110 Volt 30 Amp circuit to my workshop! It took me a while to get adjusted to the flux wire welding. I built a minibike from scrap pipe I had left over from the plumbing shop. The welder allowed me to make other things and make repairs for others I wouldn’t be able to do without it. In the middle of my last project, I cut a couple pieces of metal and got ready to weld them and when I pushed the button on the welder, nothing happened! It was dead! The fan did not come on but the light on the ON/OFF indicated there was power to the welder. I checked the manual for a reset button or a fuse and found no mention of either. So, I called the Harbor Freight 800 number and was told there was no repair for this welder. Harbor Freight has no repair facility, and no support is available. I was told by two different tech reps there is no schematics or parts list available from the factory where this is manufactured. “It is not worth getting it repaired and cheaper to go purchase a new one!” If you purchase this welder or many other things from Harbor Freight You only have 3 Months Warranty. It is considered disposable after that! All the reviews and discussion I have read about HARBOR FREIGHT I have never seen anything about their total lack of support for their products! I didn’t even get an “I’m sorry” or any offer for a discount on a new welding machine! I am retired, was an electronics technician in the Navy, active Ham Radio operator and electronics hobbyist. I feel like the electronics in this welding machine is straight forward non computer controlled and any decent electronics tech should be able to repair this given reasonable support. I removed the circuit board from the welder and found where a small component burned of course not knowing the component value or purpose will make it difficult to replace. Providing a schematic and parts list is a very inexpensive form of support that should be a minimum requirement. Their claim to revenue of 7 Billion Dollars tells me they could afford it! Leland Cox

2:23 appreciate the instructional videos I am 60 years old retired military never had the time to learn welding but always wanted to looking for a retirement hobby never welded before because of your videos I purchased the Titanium 125 to begin learning amazing how easy it Is to learn based on your content thank you for taking the time to put these videos together

I worked for a charter jet airline as a mechanic (not on anything that flew!) for the ground support equipment shop. We bought a Chicago 125 for quick welds that didn't need to be pretty, to regulation, or be under any stress, and it worked very well for that. Basically, that machine taught me how to weld, as I'd never had any instruction before. The boss was impressed enough to buy us a big Miller unit, but we used the Harbor Freight machine twice as often! I bought the Titanium 125 for my house, and continued my welding "education". Still a long way from "pro" status, but none of my welds have failed. I love your tips, and your project videos, as they really make sense the way you present them. I used your video of making the welding table, as a guide to repair a neighbors railing for her stairs. It came out very well! Thanks!

Since this welder is on sale I was researching it to see if it is worth the money for someone just learning to weld. Seems like your videos are more comprehensive than the others I've seen. Thank you.

Another for the titanium 125!

I bought the Titanium 125 after watching several of your videos talking about it and using it, And I really like it alot. I have welded support brackets to my tool box for shelves, wheel brackets to my mower deck, and welded the snow plow I use with a 20hp Ingersoll, and it held up all winter without any problems. I like the way you do your videos, short and to the point, thanks.

just picked up a titanium 125 a week ago. Haven't had a chance to run it yet though. Really appreciate time and effort in your vids.

Bought a Titanium 125 a couple weeks ago on sale, finally got the opportunity to try it out today. First time welding anything. Bought some 1" x 1/8" flat and cut into 3" lengths. Welded 90 deg angles then welded those into a square tube and finally welded a tab to outside of tube, all good practice. Welds started to look almost decent by the end! Going to buy some tip gel and anti-spatter spray soon. Thanks for the videos, I have learned a lot.

Thanks for the videos. My 11yo son and myself have been tackling projects around our new house. These videos have made him interested in welding.

I used your other video to teach my 9 year old how to weld two different thicknesses. He put 1/8” brackets on 3/16 red-steel columns. Thanks!

I asked for a Titanium 125 for Xmas last year and Mrs. Santa came through, along with needed accessories! Your videos helped seal the deal and have allowed me to stay ahead of making rookie mistakes. Enjoying it so far. Cool channel. Keep up the great work! Thx! 😁

Thanks for taking the time to do these videos, great job. I am retired and trying to complete some projects around the house and with my Side by Side. Years ago, actually fifty two years ago I worked for a while as a welder building water tanks out of 12ga. steel running a stick welder at 275 amps. you didn't want to slow down. It was piece work you got $35 for a 750 gal. tank if none of your beads leaked. Haven't really done much welding since then, and as I am sure you know it's an art and if you don't keep your hand in it, well lets just say I have forgot more than I knew. What I am saying in a roundabout way is thanks, your tutelage is appreciated, keep up the good work.

you convinced me to get a titanium 125 after watching a few of you review on the Chicago and the titanium 😁👍

I´m just learning with a lot of proyects in mind and have to confess that have bought my Titanium after seeing all the videos you made about it.

I'm so glad I discovered this channel. Just purchased the Titanium 125 welder. Looking to reinforce a trailer frame to eventually build a small square drop camper with kayak rack on top. So excited to get started. I've researched several channels and yours is the best by far! Thanks for the great content.

I love my little Titanium. It's great for small projects around the homestead.

Just purchased and this was super informative video before I learn learn to use it and tackle chevy crossmember project

I bought one to do body work on several cars. I could use a helmet. Watching your videos is giving me the confidence to do the jobs that need done because i am disabled and can't afford to drive cars that don't need work done nor pay someone to fix them.

Getting a go kart ready for the summer!

I just purchased a titanium 125, it’s my first welder. I’m loving it so far.

Great straight to the point info with good video. Since I recently purchased the 125, you're giving more confidence to start burning wire. Thanks!

I saw that the Titanium 125 is now on sale at HF and I am going to pick this welder today, this video sealed the deal. Everything you welded in this video is exactly what I will be doing. Thanks for video and love your content

Just got the 125 for Christmas. Still learning but I really love it. Thank you !

My 74 VW Super Beetle could use this welder for repairs ~ thank you for the video ~ I can’t wait to start learning to weld 😊

Nice tutorial for a beginner like myself. Thanks.

I picked up a 125 to weld up some unused hole in my engine bay. That helmet is nice!

Thanks for showing the capabilities. I just bought one of these and plan to do an unboxing/first weld video. Your videos as well as several others influenced my decision to purchase the flux 125. I'm not a welder, but have burned a few rods down. This should be fun and add to my DIY capabilities. Nice job!

I just picked one of these up today very excited!

Thanks for the videos, just bought the titanium 125 and I’m still learning to weld.

Thank you for this video. I have the same welder and plan on making a stump bucket for my garden tractor. I will use 3/16" plate. Looking at your video gives me confidence that I will be able to weld the 3/16" plate.😀

I bought the titanium 125 after watching your videos. Never welded before but I was trying to keep up a little with my 9th grader that started the school year in welding class selected it for all 4 years … now his brother 8th grader completed his high school course selections and he too picked welding

I have a brand new, 3 year old Titanium MiG 140 in the garage with a full bottle. I’ve never used it. Probably about time.

With a lot of preheat, I’ve had great success on materials up to 3/8 with my little green machine

I have a Century FC90. Used it to repair Jeep frame. My brother and his 2 boys have the HF Titanium.

Just starting out. Thanks for all the great tips.

I just bought a titanium 125 because of your reviews! I would use the helmet on an upcoming rebuild of a 2 seater go cart project with my 7yr old daughter

I bought my titanium 125 a few months ago and haven't had time or the metal to try it out yet. But will soon.

Thanks for all the helpful videos. I'm getting back into welding so I can repair the snow plow on my UTV. This Titanium 125 looks like it'll work perfectly.

Thanks for the video! I like your welding plate that helps to dissipate the heat, great idea for anyone without an all metal table or just starting out.

I've been learning for about 2 weeks. Modified my smoker and built 4 removable racks. Bought a 60gal air compressor tank to try to make an offset smoker.

I welded some 1/2" plate to a 1/4" plate with good results. I ground the 1/2" to a point so I could get in there to make a pass. .The pass was hot and slow! I let each pass and welder cool a for minutes after each pass. Afterword I tried to br eak each weld with a big hammer with the piece in a big vice. The weld held! Leland Cox

last time I welded anything was in jr high in the early 70's but I picked up a Titanium 125 to relearn a skill!

Wow! I am definitely thinking about buying the titanium 125. I have a little 5x8 lowes utility trailer I just bought that definitely needs some beefing up so your videos have been a gigantic help with me learning to weld!

After selling that Chicago electric a couple weeks ago and buying the titanium 125 I was super happy with it. It was nice to see your reply on that short btw, super cool. Even my girlfriend said it was a better weld. What really got me was when she said “it just sounds better, like more consistent or something!” I’m putting in my entry for the helmet!!

Awesome videos. I just got my Flux125 for a camping trailer build. I have only welded a bumper before. Love your instructional videos.

Great video, I also have a Titanium 125, love it.

Thanks for the review, I was on the fence about buying one from Harbor Freight but like everyone else funds are low and this looks like it will work perfect for what I need.

Cool video! I've got a buddy looking to get into welding and his looking at the Flux125, so this is perfect learning video for him!

My 13 yo daughter is going to start using the Titanium 125 (based on your reviews) to do cutlery animal sculptures. I'm a stick welder, so your vids are pretty much our teacher for flux core, lol. Helmet giveaway right up our alley.

Helmet looks awesome

I just got my welder machine today. No clue as of how it works but this video is very helpful!

I’ve been throwing around the idea of getting back into welding. If I remember correctly I gave my old helmet away. That one looks really nice. This looks like a great welder. I have projects coming up that I could use it on. Thanks for the video! God Bless!

Thanks to your vids i went out and bought a welder. Keep those vids coming out

Good video. I'd be happy to try out the new helmet!

MM, thank you for taking time to research so many helpful tips. This video you give the suggested settings for the 125 and mercy, what a great help!

I just bought one of these welders a week ago. I plan on welding exhaust with it. An so far it's doing really good

I really need to get practicing with the Titanium 125, great videos, thanks

Starting watching your videos, i recently bought the same welder and you’ve been a huge help getting me back into welding. I took a few semesters in high school but honestly have learned more just from your channel! Thanks for all the helpful tips and tricks!

I luv these videos aimed at diy'rs like myself. Thanks so much.

I carry that 125 in my trunk for when I'm out doing ornamental iron gate repairs, done some multi pass on some pretty this brackets on occasion, back when I was in welding school they only had transformers, now inverters are all I ever use. One exception I need to get an old A/C buzz box to run my twin carbon arc torch, don't want to risk any damage to my Everlast tig.

Just bought this welder. Love it so far

I used the titanium 200 extremely successfully 5/8” rounds side by side. This 3 in a triangle all parallel for legs of a bottle 🌲 tree. Worked better than I could hope for.

Love my Titanium 125...great content as usual MM

Really like that helmet! Need it to start welding soon.

If I’m being honest I have not done any welding yet but your videos are encouraging and I thank for your knowledge and advice

I did some 3/4 and it did very well. Weld and penetration was above par from expectation. Weld didn't split. Was one of those emergency things that ended up staying 😂.

CHEERS! I just bought this welder and still have it in the box. I've been watching your "back" videos for set-up tips. I really appreciate your time and help with this type of projects (and I sure could use the helmet LOL). Thanks again Mac

I have learned so much from your videos, you explain things thoroughly and I mustered up the courage to start welding last year, the titanium welder is great, it's super reliable and well priced. PS- I'd love a new helmet!

Thanks for another great video!

Love the video. I used my Titanium 125 to fix a spare tire holder for my friend. I also recently used it to fix a broken piece on my landscape rake. I did a RU-vid video on that repair.

I love my Titanium 125, so small and convenient to grab and go. I haven't ran into any small projects I needed to get welded that it didn't to a perfectly adequate job on. Great quick test on various materials!

Thanks for doing this giveaway! I am a new subscriber to your channel. I found you by watching your first video with the titanium 125. I must say, you make very good content. I plan on watching a few of your videos to get started on flux core welding.

The vevor helmet looks amazing!

This is awesome and I’d love to see more on the helmet

Great video! Emphasizing clean weld surfaces and chamfered edges is the key for successful welding with these buzz boxes. For best results have the welder on a circuit with nothing else running on it (which I know is easier said than done).

Great video. Love my Titanium 125 for repairs especially on dirty metal.

Plan on picking up the 125 soon. I need to build a baby gate for some kids visiting in May.

I'm definitely buying one

Just looking at getting one of these vs the Chicago tools as they’re both on sale. Going for this one now after watching your vids.

Thx for the help I bought titanium 140 thx to you

I’ve been thinking about getting one of he 125’s. Having watched this, i think ill get one when i see them on sale. Thanks

Picked one up looking forward to using it. Nice video

Your videos are so helpful😃

Great video man keep up the good content

I like your RU-vid video's beginners or folks that don't want to sell the farm to get started

Great job, you have shown me a lot.

I need the helmet 🙏🏽 excellent video and I continue my journey learning.

Enjoy your vids. I use .035 flux for all my outside welds if I'm not using rods.

Checking this out because I was thinking about buying a 125.

Buying one soon to fix my floor boards in my truck patches

Another great video!

Thank your for the review I had seen these welders at store just wasn’t really sure about them

i am 15 years old i love your videos very helpful i am building a cargo bike/food cart for selling fruit thanks for your awsome vids

I am hopefully buying a titanium welder soon.

Enjoy your videos on welding. Lots of info. I have a similar welder and its great for my purposes