Тёмный

This 10M/CB Antenna is a BEAST! 

Ham Radio DX
Подписаться 58 тыс.
Просмотров 13 тыс.
50% 1

I’m very impressed with this antenna - a Sirio 827 5/8 vertical for CB/11 Meters up to 10 Meters.
After many months of planning, it’s finally on the air!
Sirio 827 vertical 👉 www.sirioantenne.it/en/produc...
Callsign: VK7RHF
29.680 MHz -100KHz
91.5Hz CTCSS tone
Watch more on the entire project here 👉 • VK7RHF 10 Metre Repeater
📺 Watch the next video here 👉 / @hamradiodx
💸As an Amazon Influencer, some links are affiliate and I may receive a small commission on sales💸
⬇️ Exclusive Deals ⬇️
📖 20% off Ham Radio Prep Courses - Use Coupon HAMDX hamradioprep.com/
💰 $10 OFF at Radioddity - radioddity.refr.cc/haydenvk7hh
💵 GET 5% OFF Messi & Paoloni Coax - Use Coupon: VK7HH messi.it/
🚀 Support The Channel 🚀
💸 Patreon: / hamradiodx
📺 RU-vid Memberships: / @hamradiodx
💲 PayPal Tip Jar: www.paypal.com/donate?hosted_...
🛒 Ham Radio on Amazon & eBay: geni.us/HamRadioDX
👕 Merch: hamradiodx.myspreadshop.com/
🅰️ Amazon Store: www.amazon.com/shop/hamradiodx
🌏 Website: hamradiodx.net
📧 Email: vk7hh@hamradiodx.net
Join our TOADs Community 👉 / discord
#HamRadio #AmateurRadio
Music:
RU-vid Soundl

Наука

Опубликовано:

 

8 дек 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 131   
@HamRadioDX
@HamRadioDX 6 месяцев назад
Watch more on the entire project here 👉 ru-vid.com/group/PLSuX83ay4Oui-YIONIfWGjy3UbkacR-Xp 📺 Watch the next video here 👉 www.youtube.com/@HamRadioDX
@mobiltec
@mobiltec 6 месяцев назад
I have the 5/8 wave Sirio standard tunable 10/11 meter ground plane. This one has an adjustable top hat for tuning and 3 long radials. They are around $100. I'm using this until I get my hex beam But it's a really good antenna. I've made contacts all over the world with it on 10 meters with only 200watts. Studying for my general ticket and will get the hex beam up by the time I'm legal for all the other bands.
@alanslade2319
@alanslade2319 6 месяцев назад
I would love that on my house. Not on a repeater. But thanks for letting us see this happening.Alan from England 🇬🇧💯👍
@dheller777
@dheller777 6 месяцев назад
I have an original Penetrator 500 I bought back in the early 80's that I just took off my roof and put in the shed. It was a great antenna back in the day.
@Bond2025
@Bond2025 6 месяцев назад
I had a Sigma 4 in the UK, absolutely massive aerial...worked no better than a cheap 5/8wave vertical with no ground planes. I got a far better range on the 5/8 wave silver road on a 10ft pole hammered in to the garden compared with a Sigma 4 on a 20ft pole on a house. Both fed with RG58U in those days as we didn't know any better. The silver rod was hit by lightning and the top 3 sections vanished, plus there was a strong ozone smell on the grass.
@HamRadioDX
@HamRadioDX 6 месяцев назад
Can’t work DX when it’s in the shed and not on the roof 😂
@dheller777
@dheller777 6 месяцев назад
Mostly do Ham radio now. Have a bunch of cb radios I don't use much anymore. Was big into cb late 60's and 70's.@@HamRadioDX
@Randy-lf2dp
@Randy-lf2dp 4 месяца назад
827 is good but the penetrator 500 is the dx king
@yotubeurk
@yotubeurk 6 месяцев назад
I have had 2 of the Megarang 827 antennas myself, 2 of my best antennas. Tip replace the screws at the top parts with clamps. Screws wear out the aluminum by moving the antenna, it then sinks 1,2,3 cm until a part collapses or slides in.
@YLRaisa
@YLRaisa 6 месяцев назад
Hi Hayden, how do you manage to make so many videos every week! I have been working on my last Porsche vs Ham Radio video last month!! 73! Raisa
@HamRadioDX
@HamRadioDX 6 месяцев назад
Hi Raisa, I’ve had the past two weeks off work, so managed to make a few. Look forward to your next one!
@dave6501
@dave6501 6 месяцев назад
Thank-you for the info this is great to go over with the boys, thanks a lot. That's great.
@gc12gladiator
@gc12gladiator 4 месяца назад
Sirio makes good aerials. I’ve got the 2008 and love it. Pretty sturdy too
@davidc5027
@davidc5027 6 месяцев назад
The metal roof certainly doing the heavy lifting giving the vertical antenna a really good reflection. Being elevated certainly helps as well because as we all know "height is might". The combination of the two probably makes this antenna a stellar performer.
@HamRadioDX
@HamRadioDX 6 месяцев назад
Height is certainly might!
@CBRadioWayBack10-4
@CBRadioWayBack10-4 6 месяцев назад
some common sense right here..
@christophermarshall5765
@christophermarshall5765 6 месяцев назад
Great antenna!! My own home base antenna is a VA6160 Hy-Gain vertical job. It works well on average. My home base radio is a Yaesu FT-710.
@LuisRodrigues-vi4em
@LuisRodrigues-vi4em 27 дней назад
Hi there, i had a Sirio 827 in the past and i got another one this year, its a very good antenna i am vey happy to have it again. on the Dx contacts i did last week 11.700 km, only with 100w, contact to indonesia. 73 from Portugal.
@HamRadioDX
@HamRadioDX 27 дней назад
Very nice indeed!
@cubwolf
@cubwolf 6 месяцев назад
I am on my second 827 after having one of the first in the UK from the shop I worked at. They are a fantastic well made antenna 👍
@CBRadioWayBack10-4
@CBRadioWayBack10-4 6 месяцев назад
i saw my first 30 years ago when i had the CTE Spectrum, which was a copy back then on the Sirio 2012. i've had 827 thought for nearly 30 years myself..
@RayDabkowski
@RayDabkowski 6 месяцев назад
What a cool project. How exciting! Hope we'll be able to hear it in the Eastern US. I worked a Japanese station today from my vehicle today on 10m SSB barefoot (gray line... So maybe!)
@HamRadioDX
@HamRadioDX 6 месяцев назад
Hope so too! It would be super cool
@bebeandjohnnotsonomadiclif5287
@bebeandjohnnotsonomadiclif5287 6 месяцев назад
I have a Sirio 2016 and I love it !
@TheRiddleNL
@TheRiddleNL 6 месяцев назад
I have the Graziooli FE10V tunned for 28.450 superieur antenne in meterials there is also a 6M version FE6V ;)
@Only_Hams
@Only_Hams 6 месяцев назад
So awesome, it's guys like you that keeps the hobby going, thank you for doing what you do.
@HamRadioDX
@HamRadioDX 6 месяцев назад
Thanks for the kind words!
@Only_Hams
@Only_Hams 6 месяцев назад
@@HamRadioDX thanks for replying! 73's from Ohio. See you at Hamvention next year?
@HamRadioDX
@HamRadioDX 6 месяцев назад
I’m hoping so, I just need to work out if I can make it over there
@Only_Hams
@Only_Hams 6 месяцев назад
@@HamRadioDX Cool, I'm lucky to live so close! Ohio must be the center of the Ham radio world! ..next to Japan 😆
@Siskiyous6
@Siskiyous6 6 месяцев назад
I used a Solaron vertical with mixed results, before I learned about radials, sadly it got broken before I could give it a proper ground plane and play with it.
@spartaman1030
@spartaman1030 3 месяца назад
Awesome video. Thank you for sharing.
@HamRadioDX
@HamRadioDX 3 месяца назад
Thanks for watching!
@lancehollingworth4043
@lancehollingworth4043 6 месяцев назад
I've had an 827 up for 14 years - it was tuned to 11m for years but SWR crept up eventually - cause was on the top 3 sections, the screw holes elongated an inch on the 3rd section where it joins to the 4th section, after taking it down for repair, I cut slits in the ends and used Jubilee Clips/Hose Clips and aluminium grease, put it back together and re-tuned it to 10m - with the rig internal tuner on just the mini 8 coax, it matches up on 6, 11, 12, 15, 17, 20 & 30m - some times it will match on 40 and sometimes it wont? - it's also usable on 2m. Mines just 9 feet off the ground, in the back garden surrounded by houses but like 30 or more yards North, 60 yards East & 200+ West from the antenna and just 10 yards space towards the South, and on FT4/8 I've hit Australia, Argentina/South America, Falkland Islands and as far west as California from the UK to name a few, I think it's a superb antenna. It was £119 when I bought it and even today it's around the same price in the UK :)
@HamRadioDX
@HamRadioDX 6 месяцев назад
The import charges and shipping is the killer to get it here. Hopefully the glue lined heatshrink stops those screws from moving
@TooMuchTimeOnMyHand
@TooMuchTimeOnMyHand 6 месяцев назад
Hey Hayden, yeah probably unlikely but if you're ever in the Wollongong area I'll give you a Opek HCS-100 CB base antenna, new never been used. I had plans for it before but won't be needing it anymore.
@HamRadioDX
@HamRadioDX 6 месяцев назад
Thanks mate - I’ve never been to Wollongong haha!
@VK2YK
@VK2YK 6 месяцев назад
Looking forward to hearing and using this repeater from Adelaide during the summer. Great work Hayden. Cheers Adam VK2YK
@HamRadioDX
@HamRadioDX 6 месяцев назад
Thanks Adam! Hope to hear you on it soon too.
@StuartM0TTQAmateurRadio
@StuartM0TTQAmateurRadio 6 месяцев назад
I put an older version of that antenna up in 1987 and half of it is still there. The top half eventually fell off after more than 25 years of punishment. The Italian companies make their antennas a lot better than they do their amplifiers.
@ScatManAust
@ScatManAust 6 месяцев назад
Haden, I can't speak personally about that antenna, but I know two people that have used them with superb results, but both have suffered broken radials on several occasions and that is with the ring. Don't know if it was fatigue or the cocky's but I have heard the radials vibrate in wind. What I can say is, I bought two Sirio 2016 antennas like you at great expense and even more ridiculous freight charges but are the best 10/11 vertical I've tried hands down. I do have a 4 element Sirio Yagi to go up on me mast when I get round to finishing it and can't wait to try it coz I've never experienced a Yagi yet.
@HamRadioDX
@HamRadioDX 6 месяцев назад
Thanks for the heads up. We’ll keep an eye on the radials
@lc79tourer26
@lc79tourer26 6 месяцев назад
Beaut, I'll have to keep an ear out for it. Thanks for a great video Cheers
@HamRadioDX
@HamRadioDX 6 месяцев назад
Yes please!
@Dallas-Rife-UDX-347-Tennessee
@Dallas-Rife-UDX-347-Tennessee 6 месяцев назад
Very good to see you get it up and running 😎
@HamRadioDX
@HamRadioDX 6 месяцев назад
Thanks 👍
@TheSmokinApe
@TheSmokinApe 6 месяцев назад
Don’t be sleeping on the grease! Looks like a great project 🍻
@HamRadioDX
@HamRadioDX 6 месяцев назад
Yeah Ape! Need to grease er up!
@bitemykrank1970
@bitemykrank1970 6 месяцев назад
If there was a supplier in Australia that had the stuff at anywhere NEAR a fair price, I would use SS-30 Jet Lube on the elements instead of the carbon grease. But, I only found one supplier, and they wanted almost $90 for a 30ml tube of the stuff. It might be good, but it can't be THAT GOOD.....American made, Profit driven product.
@HamRadioDX
@HamRadioDX 6 месяцев назад
$3 per ml! Goodness gracious that’s expensive
@Colin_In_VK
@Colin_In_VK 6 месяцев назад
Great, love 10m repeaters 🙂
@jameyevans29
@jameyevans29 6 месяцев назад
What a nice setup !
@HamRadioDX
@HamRadioDX 6 месяцев назад
Thanks!
@temporarilyoffline
@temporarilyoffline 6 месяцев назад
Bout time you got that thing on the air! I'm still working on getting my GMRS repeater on the air here.
@HamRadioDX
@HamRadioDX 6 месяцев назад
What repeater are you going to use? The portable Retevis one?
@temporarilyoffline
@temporarilyoffline 6 месяцев назад
Run What Ya Brung! We are already running a GE MSTR II on 70cms as W9WAR www.repeaterbook.com/repeaters/details.php?state_id=55&ID=22005 @@HamRadioDX
@0.G.
@0.G. 6 месяцев назад
Noice can’t wait to work it 👍🏼😎
@joelaut12
@joelaut12 6 месяцев назад
Considering the price you would think the mfr would have designed the dissimilar metals issue out. Nice video none the less.
@raymondmartin6737
@raymondmartin6737 6 месяцев назад
I see your 10 meter repeater is on 29.68 MHz, which is a frequency I have sometimes keyed up here, when the band is open lately. I have on numerous occasions used 29.65 repeater HB3HD in Switzerland from here in the state of New Hampshire. A couple of weeks ago I reached OD5TX in Lebanon and other times, stations in Switzerland. 73 de W2CH Ray, NH 😊
@HamRadioDX
@HamRadioDX 6 месяцев назад
I hope you get to work it!
@spaceflight1019
@spaceflight1019 6 месяцев назад
Solar flux is going to have to be higher than 175 to have a chance. Today's 133 isn't helping.
@calebmunch-ae0fp20
@calebmunch-ae0fp20 6 месяцев назад
Hayden, your antenna looks great! It sure would be neat if I could hit it from northern Minnesota, US... what were the frequencies? FM 29.680 input/29.6 output did I see at the end?
@HamRadioDX
@HamRadioDX 6 месяцев назад
Hey mate, yeah! 29.680 MHz output, 29.580 MHz input with a 91.5 Hz tone required. Let's hope for some international 10m DX!
@KQ4JGS
@KQ4JGS 6 месяцев назад
Sirio makes a pretty good antenna.. I have the Sirio 2016, its very similar to the 827, only it has 16 short radials rather than 8 longer ones. Ive worked 37 Countries just on 10m with it. Bonus! It tunes up on 11/12/15 with a tuner. Works really good on those bands WITH a TUNER.
@CBRadioWayBack10-4
@CBRadioWayBack10-4 6 месяцев назад
'it tunes up' ?? no it doesn't, it is tuned for 11mtrs, and once set it stays tuned for 11mtrs. your tuner fools you into think the ATU pixies have gone and tuned it for other bands. hand your licence back, you don't deserve it.
@KQ4JGS
@KQ4JGS 6 месяцев назад
@@CBRadioWayBack10-4 No, I tuned mine strictly for 10 meters. I know using my tuner is a compromise, but the best antenna is the one you have. So I use what I have with a tuner. Go away kid, your taking up my oxygen.
@CBRadioWayBack10-4
@CBRadioWayBack10-4 6 месяцев назад
@@KQ4JGS so after all that reply, you ended with 'go away little kid' you could have saved yourself all that oxygen by not even responding.
@glennanderson4964
@glennanderson4964 5 месяцев назад
Thanks for the video. I am building a repeater on 29.64 in Houston, Texas. What is the usual separation distance between the receiver and transmitter? I have two sites that are about 6 miles apart. 73, Glenn WB5TUF
@HamRadioDX
@HamRadioDX 5 месяцев назад
Awesome Glenn! 6 miles should be more than enough. Here is an interesting read on horizontal and vertical separation - www.repeater-builder.com/antenna/separation.html I aim for about 100dB of isolation.
@robertmeyer4744
@robertmeyer4744 6 месяцев назад
great install. hope to hear that in the US. 73's
@HamRadioDX
@HamRadioDX 6 месяцев назад
I hope so too!
@meggalavk3ktt
@meggalavk3ktt 6 месяцев назад
looking forward to clunking your repeater hayden. also you must try some 6m aurora contacts.
@HamRadioDX
@HamRadioDX 6 месяцев назад
Thanks Steve. I have a terrible outlook south, got the back of the hill in the way. Look forward to hearing you on the repeater
@oldfartonabmx2122
@oldfartonabmx2122 5 месяцев назад
Eeehy-Lech-Trohll-Oh-Sis. Simples !
@shaun8453
@shaun8453 6 месяцев назад
Did put a butternut hf9 on that roof
@hthring
@hthring 6 месяцев назад
Where are you at on linear vs switching psu for home base hd rig? Spotted the switching psu
@HamRadioDX
@HamRadioDX 6 месяцев назад
Linear if you’re running a home HF station… some switching like Manson and a few others are pretty RF quiet now, so they are good.
@BrandonLeeBrown
@BrandonLeeBrown 5 месяцев назад
The Sirio 827 does incorporate some of the latest antenna theory, compared to some older CB antennas designs. The full length 5/8 wave gives about the lowest angle possible and doesn't need a top hat, nor is one desired. On shorter antennas, a top hat can raise the current high on the antenna, to make it act a bit like a longer antenna, but any longer than the 827 and the pattern starts to split off at high angles. The multi-turn matching coil acts somewhat like an RF choke, compared to the old single loop matching coil. The 8 eighth wave ground radials are supposed to be more effective than 4 quarter wave radials and the radials also help to isolate the feed line from RF radiation. I doubt the ferrite bead RF choke is needed on the feed line. Unlike the other Sirio antennas, the 827 has fairly heavy construction, compared to the lighter ones. The matching coil and radials really help to expand the SWR frequency range of the antenna. The Sirio 2016 is lighter weight, slightly shorter, with a top hat and has a lower wind load, but is not as strongly constructed.
@HamRadioDX
@HamRadioDX 5 месяцев назад
Yeah I’m impressed with the antenna! I bought a 2nd one to convert to use on our 6m repeater
@tonystone3565
@tonystone3565 6 месяцев назад
Hi Hayden, is the repeater now on air? And does it require a CTCSS tone to trigger it? Thanks - VK2TS
@HamRadioDX
@HamRadioDX 6 месяцев назад
Hi Tony, Only the transmitter - the receiver isn’t too far behind being installed. It will use a 91.5 Hz tone 👍
@tonystone3565
@tonystone3565 6 месяцев назад
Thanks mate appreciated. @@HamRadioDX
@WU6H
@WU6H 6 месяцев назад
Dielectric grease
@spartaman1030
@spartaman1030 3 месяца назад
You sure you aren't Luke Bryans brother???? lol LOVE all the videos!
@HamRadioDX
@HamRadioDX 3 месяца назад
If I am - he owes me
@thedr309
@thedr309 Месяц назад
looks almost \like my Macco 5/8 wave
@shanerorko8076
@shanerorko8076 6 месяцев назад
I've been looking at this antenna and it's baby brother. I've never built a repeater and I'm still only foundation but I want to build a 10m repeater now lol. I was looking at how to build 10m cans for a duplexer I should be able to make some steel ones. But for now I might just buy the baby sirrio for 10m, yes I know I can make a flower pot antenna I actually have one, but I want a ground plane antenna. I wonder if I would be able to put a 10m repeater on Telecom tower. Thanks. Shane VK1NME.
@HamRadioDX
@HamRadioDX 6 месяцев назад
Building a 10M repeater is a bit of an issue - there are no free frequency pairs without overlapping at the moment. VK2 has WAYYYYY too many allocated. When the band opens up it can be mayhem
@shanerorko8076
@shanerorko8076 6 месяцев назад
@@HamRadioDX what about 15m? Is it possible to have a 15m repeater?
@HamRadioDX
@HamRadioDX 6 месяцев назад
No not really, at least not on FM there is nothing in the bandplan for under 29 MHz
@mr.stonerUDX714
@mr.stonerUDX714 6 месяцев назад
its a fair antenna cant handle a lot of watts great antenna for the beginner
@DXCommanderHQ
@DXCommanderHQ 6 месяцев назад
Next year Hayden, I have a toy for you!
@HamRadioDX
@HamRadioDX 6 месяцев назад
👀 I look forward to that Cal!
@STARKYMART
@STARKYMART 2 месяца назад
According to the manufacturer’s specifications, the antenna can be tuned up to 28.4 Mhz. Did you have to modify the top end of the antenna to tune it to 29.680 Mhz.
@HamRadioDX
@HamRadioDX 2 месяца назад
Yes. I had to remove the very top section.. I then put a new "plug" on the top to stop the water running in and adjusted it for 29.680 MHz. 1:1 SWR
@STARKYMART
@STARKYMART 2 месяца назад
@@HamRadioDX Perfect, thank for the info. VE2MTK
@psx1966
@psx1966 6 месяцев назад
hello when you made the common mode choke what kind of ferrite did u use
@HamRadioDX
@HamRadioDX 6 месяцев назад
I used Fair Rite FB31-102002 beads, about 5 of them
@DonzLockz
@DonzLockz 6 месяцев назад
Good quality work Hayden but I didnt see you do anything.😂👍
@HamRadioDX
@HamRadioDX 6 месяцев назад
I was supervising 😂
@DonzLockz
@DonzLockz 6 месяцев назад
@@HamRadioDX haha, well said.👍😁
@peter-vk3acz
@peter-vk3acz 6 месяцев назад
Signal report into Melbourne 1102hrs Monday 11th… Heard the voice identifier 10bd over 9! Well done Hayden! Peter, VK3ACZ
@HamRadioDX
@HamRadioDX 6 месяцев назад
Wow! Already! Thanks Peter. The repeater's receiver isn't fully active, it's still on test - but it is linked to a local repeater here in Hobart for testing, so you should hear chatter on it.
@peter-vk3acz
@peter-vk3acz 6 месяцев назад
Has been a quiet sporadic E season thus far with me (until this morning), but will be listening out for it. Cheers!
@z3r0c00l2
@z3r0c00l2 2 месяца назад
I have an issue with mine. And I am not sure if it's because I am not using common mode choke...
@HamRadioDX
@HamRadioDX 2 месяца назад
What's the issue?
@z3r0c00l2
@z3r0c00l2 2 месяца назад
​@@HamRadioDXI have a constant s2-s3 . It's not a classic static sound . Seems like there is noise inside but doesn't sound like a proper noise . I have run my radio on battery and still the same. So the antenna is grabbing something out there . Perhaps electricity pylons that have outdated equipment and need to be replaced. Should I change antenna polarization or try a common mode choke ? Jimmy SY1DAL
@HamRadioDX
@HamRadioDX 2 месяца назад
Try a common mode choke. You can see if there’s an issue by changing out the feedline too
@z3r0c00l2
@z3r0c00l2 2 месяца назад
I use a very good quality feed line. You think it might has issues ? It's strange. Never had issues . I will try common mode choke first ... Thanks 😊
@HamRadioDX
@HamRadioDX 2 месяца назад
Try the common mode choke you might be picking up noise on the feedline
@richarde735
@richarde735 6 месяцев назад
is that the university, where you work?
@HamRadioDX
@HamRadioDX 6 месяцев назад
No it’s not
@ozone385
@ozone385 6 месяцев назад
ELECTRO- al-iss-iss
@HamRadioDX
@HamRadioDX 6 месяцев назад
That’s it!
@multilecful
@multilecful 6 месяцев назад
Love the dick smith power supply😅
@HamRadioDX
@HamRadioDX 6 месяцев назад
Actually that was from Altronics - www.altronics.com.au/p/m8254-13.8v-20a-fixed-benchtop-regulated-power-supply/
@Andy2e0ree
@Andy2e0ree 6 месяцев назад
Just about your shop you do not have V neck T-Shirts for sale
@HamRadioDX
@HamRadioDX 6 месяцев назад
I’m going to update my shop and get some more designs in there, thanks for the suggestion Andy
@michiganmudduckradio7849
@michiganmudduckradio7849 5 месяцев назад
in my opinon 5/8 antennas are not great... they require them to be shunted to ground (the tuning coil) and seem to have poor (poors a bad word maybe less than ideal?) receive... i put a m400 up and never looked back..
@HamRadioDX
@HamRadioDX 5 месяцев назад
Being DC grounded is an advantage from both a lightning and noise point of view. I’ve had success with different 5/8 antennas over the years.
@michiganmudduckradio7849
@michiganmudduckradio7849 5 месяцев назад
@@HamRadioDX im not saying theyre bad. this is one of the better designs ive seen. and all really depends on usage. for dx youre not gonna notice a difference. local usually a different story.
@HamRadioDX
@HamRadioDX 5 месяцев назад
👍
@chickyandulu4566
@chickyandulu4566 4 месяца назад
hows your mum
@HamRadioDX
@HamRadioDX 4 месяца назад
Dunno I’ve been hanging out with yours too much lately to know
@CBRadioWayBack10-4
@CBRadioWayBack10-4 6 месяцев назад
it's a 30 year old if not older designed antenna, it's a 5/8th wave and is no better or worse than any similar 5/8th antenna. so what are you trying to tel us, after thirty years you have just bought an 827 ?? right and ?? nothing special, 2008, 2012, 2016 all the same antenna, Tornado,, CTE Spectrum, Mantova 5/8, all pretty much the same antenna. what are you trying to tell the newcomer idiots to the hobby ?
@HamRadioDX
@HamRadioDX 6 месяцев назад
No worries champ.
Далее
This Awesome "10 Meter Radio" Has a SECRET!
12:22
Просмотров 106 тыс.
What I wish I knew before buying my first CB Radio!
11:04
FUN&SUN | Update 0.29.0 Trailer | Standoff 2
02:32
Tipuan Jenius dalam Mengasuh Anak & Gadget Cerdas
00:21
This New TidRadio TD-H3 Has So Many Features!
15:13
Просмотров 10 тыс.
Sirio 827 Install Part 7
5:06
Просмотров 954
Homemade PVC CB Dipole Antenna
12:20
Просмотров 108 тыс.
The Best HF Antennas For Ham Radio In 2024! (TOP 3)
7:38
My Sirio 2016 - two years on!
7:20
Просмотров 4,7 тыс.
THE MOST ILLEGAL CB RADIO EVER!!?? | QUANSHENG UVK58
11:46
DIY 10 Meter Dipole For Under $10 Dollars!
13:10
Просмотров 89 тыс.
Who Remembers This Forgotten CB Radio Antenna?
6:10
Просмотров 12 тыс.
Для фанатов SEGA MEGADRIVE - Anbernic RG ARC
14:23
Holographic transparent flexible LED panel.
0:20
Просмотров 3,4 млн