This Build Gave Me More Trouble Than I Thought

Подписаться 63 тыс.

Просмотров 40 тыс.

50% 1

You ever have a project that looks straight forward on paper, but then somewhere in the process of making it something goes wrong? That happened to Tay in this episode. We were tasked with building foot rails to go underneath barstools, and Tay took the job head on! Taking slight inspiration from pictures online but tweaking and improving them, Tay fought an uphill battle against a tired brain in order to perfect these railings.
Regardless of the obstacles, in this industry a lot of the job comes down to perseverance. All that matters at the end of the day is the final product! And in this case, we are incredibly pleased with the results! Have you ever had a simple gig go off the rails? Let us know in the comments below!
Thanks for watching!
To inquire about a custom build we can help you bring to life, or to be a sponsor of the channel, shoot Tay an email at: Tay@liftarcstudios.com
Filmed and Hosted by: Tay Whiteside
Featuring: Wyatt Allen
Edited by: Walker Hooper
Music Licensed from Artlist.io
Be sure to follow Lift Arc Studios on Instagram and Facebook!
@liftarcstudios
Liftarcstudios.com
Any technique or methodology shown in this video is purely for entertainment and informational purposes only. Lift Arc Studios and their associated craftsmen are not liable for any injury or damage to your shop or surrounding areas you man incur while trying to emulate these builds. Remember, be safe, have fun, work smart!

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@MindlessCreationsFL 2 года назад

You should look into using a tab and slot style of design. If you add a little tab to each end of the large bracket and an equivalent slot to the smaller brackets the pieces will just key together. It eliminates a lot of the guess work/fiddling to get the pieces aligned correctly. When looking at tab and slot timewise, it does take a bit longer on the plasma as your toolpaths will be slightly longer and extra slots to cutout; but, you should save more than that back in weld fixturing time.

@SchysCraftCo. 2 года назад

Turned out very well there guys. Hopefully they enjoy them for many years to come. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep Making. God bless.

@chiboy002 2 года назад

hey man you should look into using V-Carve for layout on your plasma. it has nesting functions built in, not sure what you use now but if it doesn't have that then think about switching. you probably could've squeezed our a 2-3 more brackets out of your sheets using the proper nesting technique

@spevakdesigns 2 года назад

Can you input an irregularly shaped drop and have V carve nest parts to that?

@chiboy002 2 года назад

@@spevakdesigns yep, ive used it to cut from scrap shapes before and it worked great

@chiboy002 2 года назад

@@spevakdesigns i think there is a free trial so def worth giving it a shot to see if you like it. I was put on from my local makerspace

@kaseylarson3266 2 года назад

Seriously impressed with the framing square for circle drip cutting! Love it! I would love to learn about your pricing approach with a project like this. I understand if you prefer to keep that private.

@justintasht1067 2 года назад

Excellent video I was late watching this 1. Loved how they turned out looked really cool wicked design. Love watching the plasma cutter making the bits what a machine. Keep up the great work 👍

@citylockapolytechnikeyllcc7936 2 года назад

I binged through your workshop remodel this past week.... plus the yard sculpure helix tree.... LOVED that wrench you bent and put in the lower part of the ribbon.... I keep forgetting what those were used for... Alternators ? Best part.... homeowner can always go out with a torch, and borrow tools needed for a project, then weld 'em back when done!

@leroy1790 2 года назад

Love the square trick also. Will definitely be using that. Looks like your tabs for the wall could have fit inside the bracket drops? At least looked like it on camera. Great video can’t wait to see the next one.

@mikecurtis2585 2 года назад

Nice those look great 👍👍👍

@MartinBircher 2 года назад

Another job, well done!

@tylerrusso2868 2 года назад

Great work. Question. For plasma maintenance, do you use a dry grease on the gears (not talking about the sliders). Thank you.

@mytuberforyou 2 года назад

Foot rails are generally made from tube, not pipe- the idea being that tube is in OD and pipe is in ID sizes- which allows you to cut all of your saddles out of pipe section, simplifying your bracket setup and design.

@taterfab8845 2 года назад

Hey bud, your 85amp consumable should work from 105-45 amps and below.; no need to switch them out. Also, i am curious about the glasses you got with the side protection. I have always had the issue of finding safety glasses to fit over my glasses ( usually Raybans) So I tend towards face shields when they aren't always necessary. Any info would be greatly appreciated. :)

@willrefling6395 Год назад

Should be said, that isn't pipe that is tubing. Pipe is ID and an end like that would be hard to do! Love you're vids

@SWResto 11 месяцев назад

Wow 12 ft tall bar those must be really high desks

@t-bone1890 Год назад

just finding your channel, do you have any videos showing how the Sabre finds your metal, if the piece you are throwing up on the table is oddly shaped. how does the machine know if the plate doesn't already have holes in it if its a used piece

@richardpowell4884 2 года назад

My shop sabre was doing the same thing with the head not detecting. I ended up taking a point file and running it in the red butt connector for the ring.

@dakotareid1566 Год назад

should’ve put the tabs in the cut out material that way you’re not wasting space

@Shadow6a 6 месяцев назад

I see that need TI Calc there! 😂 I have 2!

@squirrelgray945 2 года назад

More less wrong is what we should all strive for.

@danielraether3815 7 месяцев назад

Can you share pricing so a noob like me can get an idea on what a job like this costs/earns?

@jessyltr581 Год назад

Put dielectric grease on the connectors

@dwighthuet8912 2 года назад

You might want to try an .065 wall tubing instead of schedule 40. Cuts faster and easier to fabricate.

@nmopzzz 2 года назад

Why didn't you cut the screw holes as well?

@MegaSchoolman 2 года назад

Could you have nested the mounting plates inside the negative spaces you had on the main bracket piece? That way you could cut down on wasted material.

@dakotareid1566 Год назад

Lol I just commented this could’ve saved material

@olivermcmahon8649 2 года назад

You need to get rid of the plasma cutter and get a water jet

@itsnotlevel2 Год назад

What you have their server is tubing not schedule 40 pipe, tubing is measured on the OD schedule 40 or any kind of pipe that carries water, oil or gas is measured from the ID....just sayin.

@stevenguevara2184 Год назад

They can skate them after work

@kwasg3 2 года назад

So..... new explanation of fusion 360 at 13:40 --- ??😁

@markehooker 2 года назад

Great Channel. Thumbs up from NC!

@ronkennedy213 2 года назад

It's tube not pipe. Pipe is measured on I.D. Tube measured on O.D.

@mytuberforyou 2 года назад

Except he used pipe- look at the section, also why he has that wonky 1.9" exterior dimension, it's 1-1/2" sch 40 pipe.

@brameelen6464 2 года назад

your setup for the brackets is much to hard just juse the corner of jour table ! look up for siegmund tables this is wat we use in europe they are expensive but so useful with al the tools that are available

@TheRobertgilliam3 2 года назад

A "12 foot" height foot rail seems a little high.

@TheRobertgilliam3 2 года назад

1:08.

@sergeyloskutov5593 2 года назад

+++

@tambaurorastation756 2 года назад

The old radius and diameter trick by CAD. ffs. Cool circle zero trick. I like that!

@samuraidriver4x4 2 года назад

I made the habit of always putting a dimension on arc's and circles because of it. Might have happened a time or 2 to me aswel🤐

@mytuberforyou 2 года назад

Most cad packages can do math expressions inside the dialog boxes so it's really easy to put " 1.9"/2" and I make a habit of that in solidworks, especially if you need to divide by five or seven or thirteen for something like columns or stair treads. It's a great shorthand trick, you just have to make sure you don't enter "1-1/2"" because then you get 1/2" instead of inch and a half, formatting is important.

@frankstuerzl Год назад

Hi Tay, my name is Frank, i´m a new subscriber to your chanel. I´m from Germany and in this video, for the first time, i saw the german word "verwirklicht" in your Tattoo. Can you explain it to me? Great chanel, keep on going! Cheers from Germany