this flame burns at 1652°F for more than 100 hours! diy ideas you need in your life right now 

This video is very enjoyable because it has ambient sounds instead of stupid thumping music. Many youtubers should learn from this that there should be NO music in videos unless the video is about music.

Great vid, this reminds me of when I was in the RAF as a chef when we went out into the field on exercise. We had the normal field catering equipment, setting up tents, getting the burners up and running and within a couple of hours getting the grub ready before the hungry hordes descended on us. We had a piece of equipment that while really versatile and efficient was very very dangerous if not properly maintained. It could run on petrol, diesel or gas. It consisted of a pressure tank containing the fuel (liquid) with a separate connection for a gas link.along side was a air pump with a leaver fixed at one end, half way down was a connecting rod attached to the workings for the pump. By moving the handle up and down you could pressurise the tank to about if I remember 40psi. This was the max pressure. There was a small gauge with a green and red zone and a lead over pressure blowout plug . There was also a valve on the top of the tank to release the air pressure in an emergency. At the bottom of the tank there was another valve-to release the fuel via a pipe to the burner frame. There were to types of burner. One for petrol and one for diesel. Both had a pre-heater to vaporise the fuel before it got to the burner. The petrol burner had two long rectangular tubes with narrow slots cut across the tube width the full length of the tube. Between the burners was a tube filled with wire wool that the vapour had to pass before getting to the burner head, this took the lead out of the vapour. When the white petrol vapour started to rise from the tubes a flame (burning paper) was used to ignite the vapour, usually with a loud woomph. Cooking could now commence. The other frame burner (diesel fuel) was mostly the same build except the flame end which was a x shape in a square frame made of steel tubing that allowed the fuel to circulate. A piece of cloth soaked in diesel was draped across the burner and set fire to, this pre heated the tubing and when the fuel vaporised in the tubing it was sent back to the burner which ended up repeating the process. This resulted in a long flame blasting out. The burner was places in a trench and with either an oven at the end of the trench to cook in or steel plates placed across the trench you had a stove top to work on. As yo can imagine maintaining the kit was vital. The most common injury was caused by over pressuring the tank and the lead plug coming out of the tank when you were leaning over the tank when pumping. In addition there was another source of heat which was much simpler called a Locombane Burner. Very simple and very versatile. Take a length of copper water pipe about six foot long and seal one end, either crimping and folding or with a bolt. About eight inches from the end drill two holes about one inch apart. With a pipe bender carefully bend the end over itself in a till the crimped end is nearly touching the pipe at 90 degrees. The two holes must be pointing in the direction of the bent pipe. This is the burner end. A flat piece of metal must be clamped to the middle of the pipe so it holds the curled end in an upright end whilst laying on the ground. A flexible fuel pipe would be added to the other end with a water type tap to shut off or turn on the fuel. Some form of tank or drum is connected to the hose and the tank filled with diesel. This should be placed about 4 to 5 feet Obote the burner. To light the burner a small piece of rag would be placed over the burner end. The fuel was turned on at the tank. And allowed to flow to the rag and soak it. The fuel was turned off and the rag lit. The flame would slowly heat up the fuel in the end of the pipe and a white vapour would start to jet out of the two small holes at that point, before the flame went out the fuel at the tank would be turned on and a large flame would jet our. By careful adjustment of the tap you would get a steady large flame about 4ft x 1ft belting out at the business end. The theory behind it is as the fuel goes down the pipe by gravity it comes to the turn in the pipe (heated by the flame) vaporises carries on round coming out of the two small holes under pressure and ignites and then heated up the pipe, well you get the picture it’s self perpetuating whilst there is fuel in the tank. We used it in when we had to abandon our field kitchen during exercises and we would make ovens out of drums and make trench stoves. A very useful bit of kit made out of what ever you could lay your hands on.

Wonderful wildlife & farmyard sounds in the background.

Pay attention not to use any synthetic fibers or strings made of synthetic fibers for the wick. You must use natural fibers such as cotton or hemp fibers. Synthetic fibers would melt inside the copper tube and fail to serve as a wick.

Excellent video of an excellent burner design. Thank you!

1652 F I'm curious how you found that number. Did you heat something up with it to that temp and check it with a heat gun? I doesn't seem nearly that hot just by flame color alone. But it could look different than the video might suggest.

This is brilliant. What a great video and I love the sounds in the background. Excellent job.🎉😊❤

What type of fuel is used in this project?

After chilly sounds I like that You precisely show every step and dimensions.

Superglue and bicarbonate of soda would have done just as well to seal the tubes i use it all the time for all sorts of things which i dont want to break or want to seal.

9:46 the miracle trick of how to make an open bottle out of a completely closed bottle all by yourself is just amazing!

If it hasn't been mentioned the most likely fuel candidate would be white gas, what is used in Coleman lanterns/stoves.

Very nice! You could even place a 'chimney' around the top of the jar and have a 'hurricane' lamp. It might even get brighter.

What was the fuel you used?

Some brass instrument makers use soapy water in their brass tubes and freeze it. Apparently the soap in the water prevents it from bursting. Not sure how well it would work here.

What kind of fuel do you use? Thank you. Best regards.

Anneal Your tubing before Forming for better workability.

What fluid is this burning?

The amount of the fuel in that jar how long does it burn it was only like a third full half full?

Nicely done. Also no annoying music. Now what are you using as fuel?

I’d love to try making one of these. Would have been really nice if each item used was given a label. Some of them are listed in the description, but not all of them. For example, the stray-on [glue] or some kind of sealer used over the cement was not identified. Also, the fuel, which I assume to be isopropyl alcohol, was not labeled in the steps for making this lamp/cooking flame/sterilizer/whatever. Reading the comments, there are several other similar and same ideas about the missing part ID’s.

Very nifty to get the wick in both sides (with the black thread). Amazing!

..wow, you're the best..from all those oil heater videos i've see, this one is most effective and looks eazy to make ! Thank you soo much !!!

Oh I do love a video with no talking when I have to guess what's being used. I am assuming as the jar is sealed, the flame will eventually extinguish itself once it's used the oxygen inside the jar, either that or it will implode.

Excellent, years ago a work colleague made an Olympic torch, like the hand held torch the athletes carry, using lamp oil? when a neighbour reached the Olympics. Was passing one morning at 6am and it was still burning brightly, never seen anything in all of you tube like it, Until this video, this is like a miniature version. Well done.

Excellent.Thank You

had one of these when I was homeless in the winter they are amazing

Was that water or alcohol you put in there?

Why does it have to be sealed (I get it could be so it doesn't spill), but how do you avoid underpressure within the glass leading to flame off?

if you figure out a heat exchanger for it. I could see that being practical for many on-the-go type applications!

What is MDF glue?

niceley done you explained almost everything so what about Nozzle Diameter ? looks like 1-2 mm Wick material ? cotton i guess Wich Fuel ? Alkohol, Petroleum, Gasoline, Diesel

What fuel are you using, kerosene or booze. The flame colour makes it look like its running on booze.

Good video love the background sound, it needed more sand in the tube.

¿No dice si es alcohol, gasolina blanca, thinner u otra sustancia?

Exactly what kinda fuel was used, it looked thin like isopropyl alcohol, maybe kerosene??

You could place a flower pot upside down on it and upset the billion dollar heating industry. (Sarcasm. I only said that because of the ad that popped up during the video) I liked the video. It shows ingenuity.

What is this type of burner called? does it work with Oil, Alcohol or fuel paste? And does it outperform a simple alcohol stove in terms of effectivity?

👍😊 What an excellent and elegantly simple design! I'm in AWE! Superb! .

What was used for fuel? Second question. Are you telling me this can be used for an exstended time and have no repercussions? Hot copper tube inside sealed jar.

no description on my video??? ingrediants, is that sugar or river sand???? lost interest

I wish you would speak and explain what you're doing and what things are. What is that yellow ground up saying look at stuff that was in the white bowl tight plastic container? Thank You

I like this video thank you for sharing to view and i wish your channel more success

can we use copper tubing and what is the diameter of the pipe

What fuel is in that lamp?

You should add a tiny tube to the burn hole so you can cap it when not in use.

How large of a room/green house could this heat to 50 degrees?

If you made the hole for the flame smaller? Would the flame be less noisy? Sounds less like a torch?

I'm also a great fan of "Farmyard Sound Effects Vol 3"

That was a pretty good idea . I've just got one problem with it. The coil should be spread apart to where the flame or even the flames heat can't get to the tubing. Over a little time the flame will heat up the coil and start going down into the jar of kerosene and it might catch fire or blow up. Maybe try making the tubing like an "n" with the hole at the top so the flame and the flames heat goes upward and not toward the tubing so the tubing will stay cool. 😊 Another thing, it might be better to use a pint size mason jar. The Mason jar flats have a gasket seal on them that would help keep any fumes from escaping from around the lid. Another thing you could do is to make 3 or even 4 of the "n" copper tubes to stick up out of the top of the lid to amplify the heat and you could put stand to hold a small lite weight titanium pot on the stand to cook on. You might even be able to put one of those stove fans that spin from the heat of your stove on top of a stable stand so the fan could push the heat into the room to heat it and not let the small flames heat just go up to the ceiling to be cooled and waisted as the heat travels upward. In a cold room you'd benefit from the heat blowing sideways into the room towards the people that the heat traveling upwards. You might be able to make and put 2 or 3 of those jar heaters on about a 2 foot stand like a coffee table. Then put the jars in the middle of the table and get a cooking grill grate and put bricks on 4 sides of the jars to put the grate on just above the very tip of the flames tips and then cook on it and then sit the stove fan on the grate on the flame to spin the fan to give you warmth. Just a thought. What do all of you think ? 😮

Please state what fuel you are using.

Isn't the fuel constantly being lost as it vaporizes and leaves through that hole when its not lit? Eventually it would all evaporate wouldn't it?

Many people are asking about the fuel used. I can’t say for 100% sure but I think it is running on fuel alcohol or denatured alcohol you can purchase from the hardware store. Lamp oil and kerosene tend to refract the light differently such that you would see some rainbow effect when viewing it through glass.

Is the fuel alcohol?

Amazing. Nice technique to bend metal pipes! Amazing skill to build that. I'm tempted but not sure I'm game to try 🤕

Do you fill the container with alcohol?

Let's solve the mystery fuel question off the bat. The best fuel for this contraption is... Isopropyl... Ethyl... alcohols. You could even make moonshine and use the heads... moonshine IS ethyl alcohol. Do not use moonshine from the liquor store it is 50% water. Grain Alcohol is also ethyl alcohol...great video, but the lack of instruction on the fuel makes it DANGEROUS! Did not enjoy leaving information out.

Way cool, bro!

what are you putting in the pipe? corn meal or sand??

Pleas can you tell us what fuel is being used, Would experimenting with petrol be dangerous?

What type of fuel? Not going to second guess here.

Great, indeed! And what is that liquid? Alcohol? Thank you.😀

Back in old days we used a roll of toilet paper soaked in rubbing alcohol and put into a 1 lb. coffee can to make a heater to warm cold hands, this was before any form of cold weather gear was used. Just take lid off coffee can and light soaked toilet paper, it has almost a clear flame so be careful but it does work, when through, just blow out flame a put coffee can lid back over can. I always kept several of these cans ready for duck hunting...

Looks great but is there a danger of heat transfer down the pipes and into the fuel? Don't fancy accidentally making a bomb. 😁

Can i make an heater for mini crucible pot to melt metal?

Use salt not sand and you can wash it right out.

Will this run on 75% alcohol?

gotta be honest, the channel name and the content don't match up.....content is FANTASTIC!

What is the fuel? Lamp oil? Alcohol? Other?

Which does better? Copper or Brass?

Herramienta muy util de mucha utilidad

What liquid is being burned? Alcohol? Acetone?

What is the liquid in the bottle water, alcohol, keroseno (white fuel)? What is it please?

So what's it used for?

Muy buen proyecto ahora que el mundo suenan las trompetas de guerra actualmente, gracias señor ipoo.

merhaba elinize sağlık kavonoza döktüğünüz gaz yağı-alkol veya nedir?

AWESOME!!!!

Riveting!! Also love the Roosters and House Finches : )

which kind fuel do you recommend using ? would gasoline work if you didnt h ave anything else ?

This is so cool and smart

So smart

What does it use for fuel?😊

Does it work with oil?

5:20 smooth tie, three thumbs up

This is probably the easist to understand video on how make this kind of burner I have seen. Very nice

With the addition of a small bit of zinc ... the Fuel can be plain water and last for 10 times longer... (have to make the burner hole smaller though..) unknown what he did for fuel here... no reaction so... had to be alcohol or fossil fuel.

Would 1/4 inch brass tubing work? Asking for a friend.

what is the fuel that was not shown or named thanks

ကျေးဇူးပါဗျာ..။။

What is the fuel? Alcohol? 50%? 70% 90% ??

What is the fuel?

Tell us what you are using "sand" and "alcohol" You told us "cotton." If you don't want to talk writ it on the screen. sad unfriendly!!

Beautiful

the hole needs to be a lot smaller, plus the best wick to use is fire rope that you put on the wood stove doors, 4 or 6mm , good vid,

Interesting, but what is the liquid/fuel transferred from the bottle to the jar? Through the whole video I was thinking, "Ok, it's water and you're going to add some Al and NaOH to burn H2 gas..." But no Al or NaOH, so is it an alcohol, petroleum product, etc? Oh, and I'm going to agree with @Cici_Silo regarding the sound. I very MUCH prefer the ambient sounds of nature and the sounds of work & tools over unrelated, random music choices so many others use! Thanks for that!

We can hear a spluttering when burning, maybe there's not enough pressure being created in the tube. I've seen a few other videos of these where you can really hear the jet sound (sounds like sssshhhhhhh). Maybe the hole is to big or the jar too big for perfect/optimal running

Wasn't obvious what fuel you used - I found myself wondering if it was alcohol, kerosene, lamp oil, or some other liquid.

Is that kerosene?

Since you weren't talking and I never seen anything like this before, I am assuming from the suggested videos on the side of the screen that this is a Alcohol candle since the construction is similar to other video. The bottle you used to fill the jar looks like a ordinary water bottle not a isopropyl alcohol bottle you buy from the store. If you weren't going to talk you might have at least provided written instructions for us noobs who can't read minds or need some instructions.

how do you cap it off to save the alcohol? do you have remove the wick cap and change out the lids to seal it?