This is How I Made My 370Z Sound AWESOME! 

To anyone who wants to know - those slats are cut in there now from the shop. I just got mine in the mail today and they are already there which I totally celebrated about. Not sure if they saw this and decided to start doing it or if yours just didn't have them but definitely worth mentioning. Maybe thumb this up so new buyers can see it.

I watched the whole video for a sound clip and you don't even rev it??????

btw this is one of the best exhaust install vids I've seen for the 370z!

Great man. I don't know why you only have 12k subs. It's only a matter of time till your channel blows up

That content cop music, haha

If you have a 2015 or above, I have a 2017 Nismo so be aware...AAM Competition 2.5 Resonated Test Tubes for 2017 Nissan 370Z Nismo - Failure of technology and customer service. I have a 2017 370Z Nismo with installed AAM Competition 2.5 Resonated Test Tubes (AAM37E-ResTest) at a high-end performance shop. Drove it for under 480 miles, got a "Service Engine Soon" light. Took it to Nissan and told them of my aftermarket tubes, so they performed a full diagnostic as it is still only at 12,000 miles and under full warranty - a Code P0430 - which is Catalytic Converter Bank 2. (Nissan charged me $75.00) They cleared the code and it happened again within a couple hundred miles. They highly suggested I go back to the OEM Cats. I contacted AAM (Director of Sales and Marketing) and at first, he was helpful, said that this only happens "Once in a while" as they have J bung system to move the o2 sensors further away. When I told him, it happened again after a couple hundred miles, he suggested I look into o2 extenders and that might help. WTF, I spent $970 USD (converted from Canadian $) and they don't really care about providing me with extenders or if the solution will work. Removing them. AAM has poor tech and customer support IMO. You can contact me via Facebook, I have all of the details if you wish.

I wish AAM did the resonated tails for the G37X! I really like their sound!

Great videos! Thanks for showing this install. I just ordered my resonated short tails last week. Can’t wait to install them!

I couldn’t unbolt the muffler the bolts were tight on there. Now I have to wait till Saturday to go to a shop 😣

Hey man. Great video. Quick question. AAM sends out a bolt kit for the gasket area. How did you remove the bolt/ or can you/ from the nuts you had to take off? Mine are warped on there and p-blast or nut remover did not help. How do we get the bolt itself out?

AAM shorttails with test pipes have considerable power gains from these cars id reccomend a Y pipe as well and some headers from Z1 and an intake with tune from AdminTuning. Easily running 330-340 wheel

One possibility I might suggest would be to wrap the outside of the exhaust pipe with enough aluminum foil to take up the space between the pipe and the tip.

Do you know where I can buy some of those triangle hanger spacers? Cheers Awesome channel!

Go for test pipes or high flow cats next.

why does AAM say Please Note: To fit the S-LINE Short Tail Exhaust properly, the emissions canister shield will need to be removed. question did you remove it ?

I was thinking of getting the invidia Gemini for a long time but I've also been considering an axelback, do u think it's worth saving the extra like 300-400 bucks and getting an axelback for my z?

receiving mine in today....intstalling later 😎

Dude, i did the same thing... except i went to a muffler shop in the hood. And they just welded something in. The sound is 100x better than stock.

I actually reverted to the stock from the AAM on my Nismo. I did not have to remove the brackets and I used silicone spray on the rubber instead of wd40

Just got mine in today. Install is this week and the new mid-pipes will be ordered soon!

@1:26 lil centipede

No revs. Nice. Lol.

What is the diameter of the piping is what I said .

Do youhappen to know if the gaskets are the sane as the stock ones? Sorry for the noob question as im planning on buying a used one soon

Subbed! I also have a 370z and my first install were the AAM Short Tails. The hardest part was getting the pipes level and even. Nicely done. Looking forward to your future mod videos!

Lol how to tighten the tips.. weld them

Bros FOURR Speed. just installed my short tail exhaust. It sounds awesome! Thanks for the vid installed it just like you did in the video worked perfect!

I cant image AAM didn't figure about the Clamping problem... I wondering who approved this product line ? Did you get any response or excuses from AAM? (yes, I know they corrected it afterwords, but geeze) Did you have any other exhaust mods and how much hwy droning did you notice?

You didnt have to remove the charcoal canister did you? Did you just remove the shield for it? and also did you CEL come on?

Has anyone noticed noticed rattling from the exhaust after installing it? Mine tends to rattle a little when I get into the 3-4k RPM's. I'm thinking it could be that the tips are too close to the bumper? Any input would be appreciated! Thanks!

Use a pair of channel locks to get the rubber hangers off, takes 2 seconds and its a 10$ tool.

have you tinted your windows yet? I couldn't tell. if you haven't and are planning to what % on all 4? I was planning on doing between 20-35% on all 4 haven't decided how dark I want it yet.

Hey I just order mine, do you remember how long did it took for you to receive them, btw I got the 2 day shipping , thanks

Good afternoon! After the muffler deleted the car have the check engine light on?

Where can I order them from can you send me some info and what was the cost. Thanks hope to hear back can't wait to install on my 370

Any loss of low end torque with this?

Any loss of power?

Your installs are awesome 👌🏻

Got mine today can't wait to go install it!!!

awsome channel mate, just subscribed !

where can i order these?

Just wanna know if your short tail still for sale

I ordered and paid for my AAM Short tails over a month ago!! Can’t believe how horrible their customer service and shipping is! I will Never buy another thing from them!!!

Thanks might pick these up

Where did you get those " aam" stickers?

Do they have short tails for 350z?

How much the cost of that AAM

Weld the tips.

Great work but I'm not a fan of them tips

2:52 song please guys?

Will these fit an hr 350z?

to much TIP in this video!! sounds awesome tho!

Nice ride bro ❤ my zzz

Is this pretty much the same a straight piping?

OMG I been waiting for this video!!!! I love the cat without a muffler dude. Your car is amazing. next mod is plastic dip rims?

me next , I just bought a 12 Monterrey blue z insta- jbarr217 stay tuned for the build

Cheap nissan

Time lapse music is gay af pls put on some rap instrumentals or something lol

frist

This dog looks so bored lol

Weld the tips duhhhh😮😮😮😮