This Is Not A BOMB

Подписаться 4,6 млн

Просмотров 883 тыс.

50% 1

Removable Batteries, we all miss them.
So Is it possible to get them back? well I think so. In this video, we will show you how to make your iPhone have a removable battery. We will be taking you through the step-by-step process of modifying your iPhone to allow for easy removal and replacement of the battery. This modification is perfect for those who are looking for more flexibility and convenience when it comes to keeping their iPhone charged. Whether you're on the go and need to quickly swap out a depleted battery, or if you just want to be able to replace the battery when it wears out, this modification is for you. Keep in mind that this modification will void your warranty.
Please note that this video is for educational purposes only and performing any modification on your device is at your own risk, and it's important to be aware that is illegal in some countries.
• THE ULTIMATE PRIVACY S... \
Join this channel to get access to perks:
/ @phonerepairguru
Thank you for watching!
Buy My BLUE Mat :a.co/d/h3iPG3i
Website( Mail-ins are currently closed) : www.phonerepairguru.com/
Second Channel: / @prgrepairtutorials2526
Ask a Question (Join the Subreddit): / phonerepairtalk
PROMO INQUIRIES: sean@prettygoodagents.com
Social:
Check us out on Instagram / phone.repairguru
Or on TikTok www.tiktok.com/@phonerepairgu...
Twitter: therealprg?lang=en
Facebook: / phonerepairguruu
My Repair Tools:
MAGSAFE MAGNETS : geni.us/BgyY
Tools and Organizer( iPhone Screen Stand/ iPad Screen Stand - Microsoldering tools etc) www.wrepair.com (Discount Code PRG5 for 5% Off Entire Store/ Discount Code PRG10 for 10% off $500+ orders)
Charging Hub With Amp Meter: amzn.to/3DzHecF
Qianli Screw Driver Holder: geni.us/QIANLIICUBE
Qianli Screw Drivers : geni.us/QIANLISCREWDRIVER
Display / Battery Programmer: geni.us/QIANLIPROGRAMMER
Tools Used (IFIXIT) : geni.us/JBYJF
Qianli Clamps: geni.us/QianliClamps
My Blue Repair Mat: a.co/d/h3iPG3i
Ifixit Starter Kit: geni.us/STARTERKIT
Phone Cooker (Heat Pad) : amzn.to/3OYQz06
Heat Gun: geni.us/HEATGUN
Electronic Screw DriverP: geni.us/WOWSTICK
Filming Gear:
LUMIX G85 geni.us/G85CAMERA
Lumix GH5 geni.us/PANASONICLUMIXGH5
Rode Wireless Go Mic geni.us/RHODEWIRELESSGO
Rode VideoMicro geni.us/RHODEMIC
Studio Lights geni.us/STUDIOLIGHTS
Spinning Thing geni.us/ROTATINGDISPLAYSTAND
Guru Approved:
Airpods Pro: amzn.to/3Qfel9l
Airpods: amzn.to/3Qmsn9n
Airpods Max: amzn.to/3QknnlB
Airtags: amzn.to/3bqKEmS
Easy Button geni.us/EASYBUTTON
Gameboy Case geni.us/GAMEBOYCASE
MagSafe Phone Cooler geni.us/jCfJoB
Nutella AirPod Case geni.us/PhUZC
Giant AirPod geni.us/GIANTAIRPOD
Nano Leaf Lights geni.us/xuKg
Anker MagSafe Charging Stand geni.us/ANKER
Phone Repair Guru assumes no liability for any damage caused to your phone as a result of any of the information contained in this video.
Do not attempt unless you are open to the possibility of further damaging your device.

Наука

Опубликовано:

11 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,4 тыс.

@PhoneRepairGuru Год назад

Hey Guys! Thanks for all the advice and tips in the comments. I'll make an updated/ upgraded version soon.

@Redviper3941 Год назад

Where can I get old iPhones for a good price

@Redviper3941 Год назад

Btw love the channel

@Redviper3941 Год назад

When did you make your channel?

@CGrantL Год назад

This isn’t really safe the way it is with multiple cells being charged with the single BMS. The first one should work. I think all you need is a better battery - one with a higher c rating. The long small gauge wire probably doesn’t help much either.

@rickeyphillips743 Год назад

How much do you charge to fix a screen with a line in the middle and a back glass

@djlemay5932 Год назад

We need that, these batteries are becoming increasingly more difficult to remove

@PhoneRepairGuru Год назад

I wanted to see if I could pull this off and it's clearly possible, this could work well with devices you want to use but don't have a battery replacement for. I'll probably make one that better resembles the older phones with removable batteries in the near future

@I-Ate-3.14 Год назад

@R.K.L but the whole point is that you wouldn't need a power bank in the first place

@djlemay5932 Год назад

@@PhoneRepairGuru We’d appreciate that, thanks for replying

@NicVandEmZ Год назад

@@PhoneRepairGuru you should make this a business I believe that means you could literally make your own adapter that uses those old phone batteries

@kazooduck Год назад

@@PhoneRepairGuru how do you get the bms boards then?

@PhoneRepairGuru Год назад

Fun Fact, I used to carry multiple batteries when I had my S4, I never had to charge on the go. Hope you guys enjoyed this one :) Blue PRG Repair Mat: a.co/d/h3iPG3i Invisible Screen Mod : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HAjzF3DB6qQ.html&ab_channel=PhoneRepairGuru

@RyanHanWenLi Год назад

EPIC

@RankyTev Год назад

3 HOURS AGO?! THIS VIDEO WAS JUST PUBLISHED

@Gamer-Jeet Год назад

what…. 3 hours ago? Also here before 5000 views

@hckd_2137 Год назад

Lmao

@TheStig2.0 Год назад

Haha, nice

@jaynayk1176 Год назад

6:54 after some full charge cycles it could recalibrate itself and show the correct percentage, but Apple could also have software locked it.

@moemuhamed6913 Год назад

The man doesn’t miss. Easily one of the best tech channels on RU-vid

@notabot9401 Год назад

I love your profile pic

@housiness. Год назад

Especially, he modified the iPhone 7 Plus a lot.

@Comrade_YG Год назад

The 8 bit guy is also great 👍

@auttpalmer317 Год назад

I agree

@DLIN666 Год назад

Underrated comment

@p0tat0es_nation64 Год назад

You should only use exactly the same 18650 cells in parallel. For the voltage drop issue maybe check max battery current. Some only gives like 5amps of current while other give 20a like e-cigarettes cells. And never swap the cells unless you swap ALL OF THEM AT ONCE. Because if you put empty cells in parallel with fully charged cells it would transfer a lot of current and this could be dangerous (discharged cells would be charged by full cells and because there is no current limitation it will just burn the battery)

@PhoneRepairGuru Год назад

Yeah a few others commented that, definitely noted

@samuelruiz7377 Год назад

Was about to mention this but you have it spot on

@ZEMRALEX Год назад

Thank you, i made power bank, but thought about adding 3000mAh cell to it ❌(it already has 4000mAh one), and i wont do it I think i will make second, with 3000mAh cell, cause i have bought 2 power bank boards

@sisamusudroka3000 Год назад

For this is the way

@wheresmylplate1965 Год назад

Claims isn't making a bomb but using cheap ass battery's and 2 different types of 18650 with different cdrs is deffo making a bomb

@jayyh_01 Год назад

the lil sfx you bearly hear make this even more perfect. ive been watching you on a diff channel for ages now, and you have NEVER dissapointed

@SuperMIKevin Год назад

I just liked and subscribed. I already knew how to do this but it's rare to find anyone who does this on the internet. Anyone who does is worth watching. VERY NICE!!!

@MyszkoServe Год назад

6:07 Warning! I work with these batteries, and you SHOULD NEVER connect two different models of Lion batteries in parallel. They have different parameters like voltage and capacity, that can end very very badly during charging! 7:00 the battery percentage is right, because the LiPo battery in the phone is fully charged at 4.4v. The 18650 is fully charged at 4.2v. You should not charge the batteries with the phone! Overcharging will end very badly You should buy a TP4056 Module, and use it to charge the battery pack directly.

@parabina Год назад

Iphone tech detected

@the_99misc Год назад

im amased you actually got technical here and explained all the dangers and solutions of this project

@MyszkoServe Год назад

@@the_99misc Yes, im actualy 14. But i like Diy projects and mods. I know from my own experience, such mistakes can have a fatal ending. A year ago, when I was 13, i overcharged a 18650. It was very hot and I immediately threw it out of my room. The battery reached thermal runaway and combusted (exploded). My luck, that it was outside. So be careful with this things

@andrewsawesome Год назад

You could tap into the port directly for the 5V for the TP4056 module.

@the_99misc Год назад

@@MyszkoServe man that's impressive, keep doing the right stuff and take care !

@dogukancil5128 Год назад

A single 18650 battery can provide enough current but the wires that come with the battery holder are cheap steel wires with very high resistance. If you replace them with thicker copper wires the phone will run on a single 18650. Also, NCR18650B batteries are high capacity, low discharge rate(Low C, as it is called in the community) cells. I didn't look at the datasheet, but it should be around 6A continuous or something. NCR18650GA by Sanyo/Panasonic is also high capacity but comes with much higher C rating and more suitable to this application. Most batteries can pulse much higher than their continuous rating, so keep that in mind. As the last thing, there is no need to remove the original battery if the battery is not a high voltage cell(3.85V), you can just tap into the bms with another cell but be sure the voltages are somewhat close.

@alexanderzawydiwski9534 Год назад

This is great. All you need to do is find the proper way to get the battery percentage working through the print a custom, a phone case that contains the battery pack in this might be a doable, day-to-day phone, and you’ll never have to sit at the charger again or pay for expensive battery replacements

@MrAeral Год назад

Damn man, you are crazy! I absolutely LOVE the idea of these removable batteries. Let's bring back 2010 together!

@Bruhman_15 Год назад

7:24 face reveal detected

@R404C1 Год назад

Maaan, I made something exactly like this in the past, it was an old phone of mine, the original battery decided to be a pillow, so I did the exact same thing as in the video, but with what batteries I had laying around. Now seeing an youtuber do the exact thing I did just brings me joy.

@Bio_Hazard_2.0 Год назад

8:23 me trying to explain to the airport security why my phone looks like a bomb and is ticking

@Kanal-20247 16 дней назад

ooops

@M.Zain-Ul-Abadin Год назад

Nice work! Appreciated 👍🏻 But at least you should check the capacity of each 18650 one by one.

@ksriram1997 Год назад

1:37 the moment 💥 i feared that it might explode & skipped a beat to be honest... Because its dangerous short the circuit... But over all great idea 💡👍🏻👍🏻👍🏻...Just a tip u can reduce the length of the wires as they are connected in parallel makes it look well organised... 📱➕🔋✔️

@gavril3698 Год назад

Same 😭🤣🤣, i want expecting that

@loen9591 Год назад

Bro i had a f*cking heart attak

@nellAhh Год назад

Yoo same that also got me good

@jomama468 Год назад

Same here bro…was scrolling looking for this comment 😭

@moarjank Год назад

these emojis are given me sensory overload I can't even read the comment

@hockeycatcat Год назад

The dark green battery says “Can not use in vape”. What has this world become man 😭 8:58

@Petesplaceunboxing Год назад

Your videos absolutely fascinate me! This is way too cool man! Gonna try this myself!

@johnzoid74 Год назад

man I need one of these mods that’s so awesome. love your videos man ❤

@jasonhedtke659 Год назад

Probably could 3D print a enclosure for the batteries or a back housing to accommodate the new batteries This has certainly peaked my interest and I would love to see this mod be improved and adjusted to make it safe to take to an airport 😂

@netheromatic Год назад

just saying they would think its a bomb and call the police on you lol

@TheSimoc Год назад

@@netheromatic And worse yet, without proper charge controller implementation and other precautions, this actually *is* a thermite bomb!

@Himechinachae Год назад

@@TheSimoc not a thermite bomb, there's just a very reactive metal in the battery like you probably already know. Thermite is most often iron oxide and aluminium.

@TheSimoc Год назад

@@Himechinachae Yeah I know, just meant that the effect is kinda same in a non-flameproofed civilian everyday environment..

@kamathln Год назад

And add a good speaker while at it.

@hottingracer8575 Год назад

Your dedication shows how much hardworking you are!

@StormDiper Год назад

You haven’t done a mod on this phone in a long time, I’ve been waiting for this!

@lukealiaqua1018 Год назад

Imagine a Car 12V battery on the iPhone. Battery health at 2000%

@CyanaraOfficial Год назад

If you were to redo this, I would recommend a single 26650. You can get them in like 5000mAh and you don't run all the balancing risks that multiple 18650s brings

@anthonyalonzo2731 Год назад

21700 cells are slightly bigger than 18650 cells and come in 4000-5000 mah depending on the cell brand.

@xdbarun Год назад

1:35 bruhh you literally gave me heart attack😭🤣 i was watching very concentrately💀

@MishelSeeraj Год назад

True

@aymenkocher6862 Год назад

Sameee

@joaquinazamargolles524 Год назад

Me to

@obitouchiha291 Год назад

Same

@nooraniejahangier7804 9 месяцев назад

Same

@KanjiTalk Год назад

This man brought back classics, amazing vid

@Laliux01 Год назад

Impressive crafting skills! That device’s remake looks menacing, nice !

@Calthecool Год назад

1:57 I've found that those battery holders sometimes have very thin wires and weak connections between the wires and the battery holder terminals. I was able to draw twice as much power from the battery by cutting off the thin wires that come pre-attached and soldering thicker wires directly to the terminals on the battery holder.

@HunterEddie 10 месяцев назад

Oh, thnx

@bland9876 Год назад

The other thing you could do that would take way more work is to make a back that you can put on the phone that has a hole where the battery would be and then you can swap out the battery that way You would have to make your own cable that goes from the connector on the board to the connector on the battery so that you can use easily swappable batteries but it could be done Not sure what kind of chips you would need on that cable though.

@catch22frubert Год назад

As someone that works on phones everyday, I'm really surprised you don't know more about lithium batteries. The round cells you used are called eighteen six fifty batteries, and they are lithium ion chemistry. The 18650's have a slightly lower voltage than what the phone uses normally. Phones have lithium polymer cells inside these days, and phone batteries are fully charged at 4.35v vs the 4.2v maximum of the regular 18650 batteries you replaced the lithium polymer pouch cell with. That BMS would had let the 18650 cells overcharge to 4.35v and you would had been in a little trouble if anything went wrong and the 18650's went into thermal runaway because of overcharging. Next time, use a lithium polymer pouch cell that goes up to 4.35v max, similar to what comes in the phone, so the BMS and voltages match up and you can use the regular charger to charge the phone. You can get 2x 5000mAh pouch cells in parallel, and have a similar 10,000 mah battery size, plus the new cells can lay completely flat. If you 3D Printed a new back for the iPhone, you could easily fit the 2 lithium polymer pouch cells inside the phone, along with the BMS and it would all be much more tidy, and much more safe because the BMS can't overcharge the cells anymore.

@joelmtz9815 Год назад

I love doing that into phones, i have done it since the iphone 5s (i put up to 3 16850 baterries) it lasted to me 7 days (using it poorly), also into an ipod 4, an iphone 6s and into an iphone 8 plus the last one i put an 5,000 mah (4,200 mah because it’s degradated) lithium cell (6060100) and it last to me 10:30 hrs in screen time, some recomedations for these mode, use thicker cables from de batteries into de BMS board, to prevent shutdowns and it arrange a little bit the % issue, love all your videos !!

@IMDYT420 Год назад

The low battery warning is just a reminder to put your extra battery’s on charge if you haven’t already 😂

@RaihanZaman Год назад

Nice video looking forward to watching👍❤️

@SPR._ 10 месяцев назад

Coming back to watch this masterpiece!

@bulldog8080 Год назад

Finally I was waiting for this video for soo many months!

@_Sherdil_ Год назад

0:48 got me rolling all over the place

@riyaansheikh7470 Год назад

Him: 1:26: "This is being done by trained professional" Also him: Doesn't wear insulating gloves

@nexusXT60 Год назад

Okay, this is LEGENDARY.

@NickJJH14 Год назад

Love the parallel circuit. Brings me back to my mechatronics days.

@vaxt Год назад

The iPhone BMS + Regular Charge Port may allow the cells to get up to 4.35V, which, for these 18650 cells they shouldn't. Best to charge using the 18650 charger that will only charge up to 4.2V.

@krisd1000 Год назад

You need special 18650 cells from LG or SANYO that can go up to 4.35v

@ticktockbam Год назад

What I don't like about removable batteries is that is someone were to steal your phone they would be able to pop off the lid just as easily as you can and you'll never have a chance to track your phone down. The latest versions of Android (13 I think) have a feature that prevents your phone from turning off, instead they just make the thief believe they turned it off, so you would still be able to track it down even if your phone gets "turned off", bit with the removable battery that idea gets thrown out the window. I think iOS might have a similar feature? Not sure tho, but the latest Android OS definitely has that.

@BroadCastPlanet Год назад

What an inspiration! Make phones this easy to replace battery’s! ok maybe you need a specific tool in order to take the back, BUT AFTER THAT, JUST REPLACE DA BATTARYS

@KS-vu5oq Год назад

That tactical reload🔥

@seanwright2665 Год назад

I'd love to see an update on how long it takes to charge up, but 17hours on a single charge thats amazing

@pretty_bored Месяц назад

I would last more than a week with that 😂😂

@IronOre33 Год назад

0:28 that was toooo funny my guy

@Kitten_abyss Год назад

I LOVE the change in music at 6:16 it's just great! Edit: also the fact that it looked like a bomb is hilarious

@electro4172 Год назад

I love the Minecraft Door Sound while opening the iPhone at the start 😂👍

@darthraider450 Год назад

5:30 You could have used wire clippers with the wire cover removal tool to make the wires shorter, and then soldered them on to the other batteries. Would look a lot neater and reduce the chances of unnecessary damage.

@PhoneRepairGuru Год назад

This is just a test to see if I could pull it off. I'll make a more refined version in the future

@RalphVB Год назад

Having it work for only 17 hours is far from a throw back to "the goold ole days", though this mod had me in stitches. Something we all have thought about, but something very few can actually do.

@-ThatGuy- Год назад

Old smartphones had pretty bad battery life honestly. I don't recall them ever going over 4 hours SOT in my experience. Not basic phones those lasted days. Lol

@RalphVB Год назад

@@-ThatGuy- Yeah I was referring to the Nokia3310 days

@random_person618 Год назад

@@-ThatGuy- The "basic phones" you said are called "feature phones" instead of "smart phones"

@-ThatGuy- Год назад

@jimmydewalt417 Ah... That makes more sense. Those days the phones lasted for so long. But they also did next to nothing. Lol

@RalphVB Год назад

@@-ThatGuy- yeah besides playing snake lol

@SuperMIKevin Год назад

I would love more episodes like this.

@walter_marcus Год назад

that voltage drop is measured by something called "continuous discharge rate" and it ranges from 10A to 30A (you can find it on the datasheet if you google thos numbers) and i think Lipo batteries (the ones that are flat) have a rating of 20A+ and also thos cells have something called charging rate which is very important cuz if you mismatch batteries it can overcharge other batteries that have a higher charging rate if you charge them all together.

@hahalolha Год назад

PRG, you've gotta try this with Ni-Cd batteries, each cell is 1.2v nominal so 3 in series will be perfect. Ni-Cd batteries are literally indestructible, they can withstand -20°c to 45-50°c so you could probably freeze your iPhone too 😁

@Ramon314 Год назад

So the battery normally deliveres 3.6 volts? Why not 5 of 3.3?

@kisko327 Год назад

Actually no. In normal conditions li-po batteries have voltage per cell in range of 4.2V when fully charged to 3.2V(optimal) - 3.0V(minimal safe) when discharged. Ni-Cd batteries have almost constant voltage. Phone's BMS board is not designed for working with ni-cd batteries

@KingSkrap Год назад

You should take off the back panel of the lcd you can see into the phone if u do it it’s a cool mod just take the back few panels off the lcd

@pretty_bored Месяц назад

Will the LCD still work then? I think that it wont be able to really display any darker colors anymore. Correct me if I'm wrong please

@KingSkrap Месяц назад

@@pretty_bored I think your right, youd still be able to see, but not very well. I fucked up a screen on an iPhone 6 and cracked it, so I did this. Hence being no backlight or reflectors it was extremely dim, with more tweaking you could theoretically put the backlight to shine in through a see through mesh or plastic (maybe some sort of fiber optics that shoot the light to the sides of the screens, but it’s definitely not ideal.

@xvii8693 5 месяцев назад

The humor with the bomb part was hilarious 😂

@markdavega7097 Год назад

This is my first time watching master piece video.i love ur idea dude.keep it up your legend.

@spyrosbellos2522 Год назад

3:46 the wires are too long and too thin, the voltage at the battery when you measured it was 3.6v but after the voltage drop due to the high resistance of the wires it was probably under 3v at the phone's end causing it to shut off. Also at 6:50, the battery percentage is measured by the voltage of the battery, so it is accurate.

@Damianseconda995 Год назад

Current charge state algorithmns are more complex

@RafeTVGaming 11 месяцев назад

when it measures the present by voltage, it is different for each battery types and because it was made for a 1p lipo, and not mix and matched 4p 18650 cells it would be inaccurate

@spyrosbellos2522 11 месяцев назад

@@RafeTVGaming most lithium polymer and lithium ion batteries operate on about the same voltage range, i have 2 lithium polymer batteries from power banks and 2 18650 cells from my vape, both are charged to 4.2v when they are charged from their devices

@spyrosbellos2522 11 месяцев назад

@@RafeTVGaminghave done this on an old phone whose battery was so degraded it would not even power on even when plugged in, after putting thicker wires to prevent the voltage drop and then fully discharging it until it wouldn't power on, then fully charging it to 100% with the phone off so that it can learn the battery, the battery percentage was accurate

@pretty_bored Месяц назад

@@spyrosbellos2522 save your lungs and dont vape, BREATHE AIR 🗿🍷

@iyansarif Год назад

Loving this format video

@VaflaBG2022 10 месяцев назад

Thanks to you, I took apart and reassembled a phone for the first ever time! It was a galaxy s4 mini

@MartinDerTolle Год назад

Things I would want in this mod: -custom cnc-machined iPhone housing -encased battery modules (you can have multiple) -charging station for battery modules -the battery modules would have contacts to interface with the iPhone -the iPhone without a battery module installed would still have a protrusion and the mechanism would be inspired by old laptop battery packs

@sn1p3r_p4nda7 Год назад

Fun Fact The EU says from 2026 every Phone have to get Easy removable Batterys ^^

@pretty_bored Месяц назад

Guess the EU wants our phones to be completely f****k after dropping in water one times

@jasonvoorhees3282 Год назад

I wish if you have done this project on newer iphones as older Iphones are considered more "repairable". I also think the battery holders have a high resistance (contacts and thin wire) which decreased the run time.

@demm7777 Год назад

Btw the unbranded button top 18650 are usually (not all) garbage with 500mAh an high internal resistance. A fairly new 18650 could definitely supply enough current without dropping voltage much when phone consumes more power. panasonic 18650bd for example

@walnutt_ Год назад

so nobodys gonna talk about the nutella jar just chilling there? 0:36

@Redviper3941 Год назад

That’s a AirPods case

@walnutt_ Год назад

@@Redviper3941 oh thx

@LightsGamingPC7 Год назад

4:24 LOGIC !!! LOGIC I know it

@GAMERIN-rn6dj Год назад

Finnaly I've been waiting for this ❤️

@giangabrielboyero9976 Год назад

the revolution starts here.

@yasharso Год назад

You gotta trademark this somehow. This actually works and very practical but needs a lot of refining the design.

@RandomGod5730 Год назад

he could just add a redesigned backplate to go with it so people wont think its a bomb

@KingSkrap Год назад

Bros goin places with them vape batteries 😂

@newacc1527 Год назад

They are not vape battery’s vape batteries are made with li ion cells that are way smaller then that

@axeltorres3972 Год назад

Love ur work ❤️ Keep it up man

@Redbulpro Год назад

Are the batteries hot swappable? Can you replace them one by one while keeping the phone turned on? That would be a real improvement over the old swappable batteries hahahah. Awesome video mate!

@malhardeadshot6118 Год назад

Some awesome mod ideas, use the original battery but as external like have a 3d printed compartment and have it support the battery, and use the space inside the battery compartment inside the phone as a cooling space, put some heat sinks and a fan in it✌️✌️

@helpingayush1833 Год назад

Put iphone's screen in Samsung's phone

@AmirAli54321 Месяц назад

That’s technically impossible I think

@TheTech112 Месяц назад

@@AmirAli54321 because it is

@pretty_bored Месяц назад

wont fit probably

@AmirAli54321 Месяц назад

@@pretty_bored I mean enough modding or finding the right screen it might work

@Apixelatedhedset Месяц назад

Iphone Milky way A12 5G

@haiydenstevens6759 Год назад

You have a great channel

@Gundownman Год назад

this is the first video ive watched from you. i subscribed at 0:28 because funny. u are de best

@jaash8 Год назад

6:46 Coincidently the time on the iphone is 9: 41

@knockknockbitch Год назад

Iykyk

@silentwolf-ob5tk Год назад

2:29 i like your cut G

@surapurna 6 месяцев назад

Hey anyone done this mod. when we charge the cell with stand alone charging modul. we must disconnect battery from the phone or it can running together? note atleast 5.2v imput voltage to charge the cell.

@BiggCeooo007 Год назад

Bro that spark gave me a fright 😂😂

@Jimiscool88 Год назад

the spark thing you did in 1:37 literally jumpscared me!

@jec_ecart Год назад

Excellent!

@SundrySun90 Год назад

Read my mind when you said it looked sus 😂 I was thinking the same thing

@brody-up8hn Год назад

This is so cool! Amazing Work.

@sharpster_ Год назад

"Uh hey bro, youre getting a call.." "Oh, can you answer it for me?"

@doughnut6900 Год назад

Me just glueing a portable charger on the back of my phone: i am smart

@PyroAnonymous Год назад

Figured I point this out. Seeing the nominal voltage of the phone's battery is 3.82v, it leads me to suspect the battery pack is actually Lithium Polymer High Voltage [LiHV], not Li Ion, which usually are 3.6v, although the one you had was 3.7v nominal, the same as LiPo packs.

@CrimsonXYR Год назад

I love this channel he’s gonna become number 1 tech channel

@josephplays5190 Год назад

bro had life support

@JustSomeNothing 9 месяцев назад

0:23 that "NO" 😂

@prathamsharma3023 Год назад

8:18 The Airport Security be like

@danielelmore1252 Год назад

Was hoping to attach a photo of my iPad battery… it won’t let me. Your teaching is ways of doing this stuff in an easy way.

@Donkey114 Год назад

1:36 that legit jump scared me 💀

@Sir_Granolah Год назад

8:50 he said he thought everybody was impressed by his 'masterpiece but earlier he said it looked like a bomb😂😂

@WayneNathanielThePinkYellowRed 11 месяцев назад

8:09 I just laughed after you said it looks like a bomb and i laughed when there's a explosion effect 🤣🤣🤣🤣🤣🤣🤣🤣🤣

@Lil-Rokas Год назад

Love your channel man i just fixed a phone and i got the screen of death saddly 😂

@Mikolaj_5329 Год назад

the best tech channel in the world

@fallgate Год назад

I think first one was just discharged so 3 sec of charging wasn't enough Also bms works by measuring time+in/out current constantly and calculates battery capacity using the fact that at 4.2v battery is full and at 3.7 it's at 0%, so those voltage points kinda the only thing it detects, I'm pretty sure if u unplug bms and power it with diff cell it will show last thing it remembered (some show estimated % like 100/40/18 but it's inaccurate until bms looks at a few charging cycles)

@Abdullah-lp6or Год назад

Hello PRG i have a Question that if we replace our iPhone battery from apple will they use the original one ??? By the way LOVE your Videos Keep it up❤❤❤😊

@goeatabagel1117 Год назад

THANK YOU SO MUCH, IVE BEEN GETTING THIS NOTIFICATION AMD HAD NO IDEA WHAY IT MEANT

@sausagelowpc666 Год назад

Ki! I have a little challenge for you. I've done this on my Xiaomi Redmi 7a and it's incredible. The challenge is, you have to add another speaker, but from laptop or y'know, just add another speaker on the back, in you're case on the sides of the batteries for better cable management (or idk) so, don't brake anything, don't take away anything but just add another set of speakers on the back of the phone. Thanks, even if you wouldn't try.