This is NOT the S.H. Figuarts Ryu and Chun-li (Super glue not included...) 

I recommend buying a matt finish spray from any hobby stores to apply on those bootleg figures

As long as the bootlegs aren't particularly expensive or requiring a lot of maintenance to come close to the official product, they do seem like a somewhat viable method to either find cheaper bases for customizing or kitbashing, or if worst comes to worst a source for assorted joints and other parts that may come in handy later.

I'm glad they release these cheap under quality versions, instead of just scrapping them. They're great for extra parts. Thanks for the review!

These bootlegs are only 25% of the original price.. I think we have to accept their lower quality.. they are not that bad after all..

I always appreciate these videos of yours that highlight bootlegs. They're really useful especially for customizing purposes. :)

Pro tip: using clear Elmer’s glue or polymer clay between loose joints should make them more stable. You have to do multiple coats and blow dry to get any loose joints on real or fakes on point

Not completely terrible for their price. Great review.

Think you could do a glue mod tutorial?

Where can i buy them in 2022?

You are the first person i kniw who say ryu name correctly, most people would say his name “Rye You”

I glue a bit of tissue when I glue any joints. It looks good enough for $15.00 to me. I have the KO Ryu and mine was fine. I paid $18.00 with free shipping.

Gotta be careful from now on. Thanks for sharing this video man.

When I used to still buy this kind of stuff I would always completely disassemble the figures, make the necessary modifications(lots of dremeling), put them back together properly and airbrush them with some dull coat or whatever finishes that were missing. Now the only k.o.s I spend money on are mp and os transformers. They're all either on par or better than official versions. On the rare occasion that they're not, it's usually just a pin that needs to be pushed further in or some excess mold that needs to be cut away. Sprue marks show up on official and fakes so that's no big deal and nothing that really fine grit polishing stage sand paper can't take care of in a few seconds.

My cat loves jumping in frame every chance too. Catzilla photo bomb

Ryu doesnt look bad tbh

I bought both of these. The Ryu was good, the Chun Li is a piece of shit. The shoulder joint snapped almost instantly and it was the worse joint that I haven't been able to fix.

hey there, u find this at aliexpress? where can i buy one of this bootlegs online?

that chun li you had is better then mine, mine the arm keep came off, and then i end up broke it😂

Amazing Review top inform us, by any chance do You still have it?

Will you do commission work for the hot ryu??

Wow 😮 got me running to make sure mines are original bought mines in 17 or 18 Bandai Capcom will do a video soon not on my tech channel though !

WHERE DO I GET AND HOW MUCH

Damn that hot ryu

Did you already reviewed the k.o shf spidey homecoming?the normal suit one?

Does the face parts fit on the real figure

They were all obviously made in the same line-up, the one you get 'bootleg' are just defective picked from quality control.. ex factory worker ..

I want one for Blanka and Cammy for customization purposes.

Guys plz I can’t find him on ebay can you plz put the link

Can anybody send a link to Ryu? Thanks

Would you sell the bootleg Chun li

Please review the Sh figuarts Akuma Knockoff... Just subbed

How much is the original

Unless you drop an sh Figuarts figure the joints hold up ok. Then again there are factory defective sh Figuarts figures.

aye man would you want to sell that chun li bootleg figure?

I have a real shf ryu, the legs are so tight and the skin color is much whiter .

You should make mod videos for bootlegs

Heads up, a bootleg of the figuarts android 18 appeared recently on ebay and aliexpress for $24 to $33. After seeing some product shots....same with the krillin, better spent getting the model kit.

Should I get Chun-li for U$ 24,00?

Hey dstar01 you should checkout the bootleg sh figurts homemade-suit spiderman from ebay.

Are you selling your Chun Li? The good one?

Bang review shf ultraman orb yang thunder breaster

Nice they are cheap but if you don't have a lot of money to buy them.

He could be sweaty...

lol why would u want the fake one?

can u do neca ryu bootleg

A waste of money imo not worth the super glue applied :-/