This is THE knife of all Time: Civivi Qubit 

Truly one of the most knives ever made

The zoom-in in the onion at 0:44…this is why you can’t just listen to Pete’s videos, you gotta pay attention 😂

He grew a second right hand just for those comparison shots! No other knife reviewer goes so far for their subscribers!

“That looks like a pretty low-risk review proposition” I cracked up. Hilarious. Super entertaining as always.

This should be a template for all future knife reviews done by anyone! Especially the egg cutting test!

Best video I’ve watched all week. Laughed my arse off, then had to explain to my wife why cutting a raw egg was funny. There’s six minutes of my life gone forever.

If i had a fever dream of a knife review, this would probably come close to it.

One thing that I am reminded of (as I received the Ultem Hogue Deka from BHQ today and was taking it out while watching this review) is that when cutting on a a flat surface with most folding knives (e.g., bugout, griptillian, freek, manix 2, sage 5, pm2, stretch, endura, delica, creely mako, every single flipper ever) like the deka, the straight part of the blade (which is 2 inches of the blade!) is unusable because the way the figure guard protrudes 5mm below the line of the blade. This similar to the PM2, where the finger choil and angle of the grip prevent the rear half of the edge from being used on a flat cutting surface. Similar to the elementum with the finger guard protruding beyond the heel of the blade. Whereas here, this qubit has the belly back closer near the heel of the blade, and the heel of the blade protrudes to or beyond the figure guard nub at the front of the handle, and the angle of the handle to the blade lets you (using a pinch grip) get pretty far back on the blade when cutting on a flat surface. I point this out, because when slicing on a cutting surface, you're dragging the edge of the blade along the cutting surface, and when you're forced to essentially one location where the knife edge is in contact with the cutting surface, you are going to put all the wear onto that single location. To me, without ever having held or used a qubit, this looks like a very smart configuration of the blade and handle that let you take advantage of the full length of the edge, even when on a cutting board, which means wear will distribute over the length of the edge, compared to say, the PM2, where any cutting on a cutting board will put all the wear on the outer 1" of the blade. If you aren't cutting on a surface, then none of this matters.

It's a very knife, with so much of the things that make it knife.

Knives are so good these days it really comes down to ergo and fun designs. So much out there for everyone.

I gave one as a gift today. I liked it enough to get another. I'm a knife a week geek.

Aww I just love that cutie fluffy head 😊. Talking about the cat, lol. The mental image of that Civivi cutting a raw egg will stick with me for awhile. Knife company’s should flood your mail box with knives to review from now on…..Great, honest, and yet fun review. Thx!!

Amen to the spoiled part, we live in a day of awesome steels, great designs and affordability, great vid Pete!

I recently got into knives and I only have a few. I got this a week ago and I love it. Probably gonna be my go to knife for edc for the foreseeable future

It‘s so good seeing you doing more videos again! I even acquired the taste for your outlandish humour 🤣👍

I've been eyeballing this one. Thanks for your input.

Good to see you back Pete!

Next like goal: eat an onion but while wearing a sensible hat?

There’s a lot to be said about XIII, but man the music is great. Also because of all your TRM talk lately you’ve got me waiting for an Atom drop. I already had one once, thought I hated it, but now I want another. The cycle goes on

You ate that onion the second I hit that like button. Your cat wasn’t just whistling Dixie. Cool cat.

One of your best yet Pete, that egg cut test really caught me off guard 😆

Love the thin blade geometry. Hate the slippery smooth aluminum scales.

I fear I am not cool for loving the design of this knife of a knife. But, honestly this is the fist Civivi I've been excited about since the McKenna. Something about the button lock, that leaf shape and anodized scales. Also, who doesn't want to crack open an egg after cracking open several beers? It's just good, clean fun.

Pete, you need a good Vidalia onion! They're sweet, crispy, crunchy, a little oniony, and work wonderfully on sandwiches. I'm sure you have some kind of sweet onions there, by whatever name. Here in the US they're similar to WallaWalla Sweets or Georgia Sweets.

"I opened four beers. For SCIENCE."

This is my beater knife for work right now. I love it. It's a really good knife

"It's a nice piece of kit". Then he proceeds to throw it on the sharpener.. LOL. Man, I'm really enjoying seeing your videos again. Thank you for your time and effort. I hope you enjoy making these videos as much as we enjoy seeing them!

Great complement to Nick's video. 👌👍

Your thumbnail for this video was incredible.

Great review as always. Please do a cutout test on civivis damascus steel.

That 🧅 part with the cat is hilarious 😂 🦉

man, I've been eyeing the civivi teton tickler too. If you did a review I could be persuaded either way. Thanks for the video!

Just got the same knife a couple days ago. It’s fine. Good grind, blade well centered, it’s sharp. No complaints at all. Doubt it’s going into my regular EDC rotation but it’s fine

CIVIVI's are the BEST BLADES of this Planet!!! Why they are not sending me blades!!! I LOVE CIVIVI!!!!!!!!

Frat hazing + knife review. Best crossover vid ever

I"ll stick with my steel will Cutjack. Carried it for 5yrs and still going strong

Holy shit that was a hard turn into the surreal. No spoilers. Why does a knife vid have multiple camera angles?? So good!

I got one of these as a gift for a friend on his birthday and now I kind of want to buy one for myself :D

The Qubit is an amazing knife. One of the very few "budget" knives in my collection that play with the big boys in my Top-25. 😉

Thank you

Still happy to use 440c for most stuff tbh. Onion skin is supposed to be the healthiest bit, if you make a tea out of it.

Came for the knife review, stayed for the KH and 3Houses music

Of all the newer knives out there, this is certainly one of them

The egg cut was brilliant 😅

Raw dogging an onion >> chowing down on wet bread. Carry on, Pete.

Always love your vids! What was the size/sharpening montage music? I felt very much like The Magnificent Seven or Aaron Copeland. I would like to jam out to it when I do my real time, real life cool stuff montages.

Knife AF right there.

That is truly a knife if I have ever seen one. I miss your videos and hope you jump back in game with full Mojo. 😂

dang right on the comparison, that’s exactly the point😂

these civvys are cool for sure Pete. random note here i just got my first mule team blank in Rex t15(MT34); i was kinda perusing the list of past mule steels and legit it seems like 85% of the list end up being high end/exotic, sprint run quality steels that are A to S tier right off the rip.. now i kinda feel like i wanna catch'm all ffs!!

Nice review. Civivi and a couple of others are turning out some good value knives now. Have you reviewed any Kubey knives? What is the sharpener you use in this video?

Uuh, those SONIC 🎵's made me smile 😊

Public Service Announcement: Pete’s cat review video is inching closer to a million views. Do your duty, watch it again.

The Sencut Serene has similar build with different materials, curious how it would compare in cut test.

Another unsolicited knife another knife review. Keep 'em coming Pete !

This is the rewiev ever!

The other day in a small town near here in a rural supply shop I saw a folding knife in a plastic clam shell packet beside some yard tools and took a closer look expecting to have a chuckle at the crapness, but was a little taken aback to see the print on the packaging advertising the D2 steel. Hmmm, ok I thought, well played.

0:43 OMG! Is that a Beherit!?!? Oh, it's just an onion...

Great review as allways mate 👍🏻. It looks like a very functional modest EDC. With your love of Spyderco knives I'm surprised that you've never reviewed the SPITS M390 Titanium slipjoint (slipnotch) knife? Is it a knife that you're familiar with Pete?

What does Pete do with rings of plastic tube that he cuts? I'm glad to see Civivi keeping things tip as it ought be.

A dedicated fraction of Spyderco fans left the room around 0:55 😁

Dr. Larrin Thomas just mentioned that’s one of his favorite steels and how geometry is more important than steel.

LOL! This thing actually looks pretty sweet. Have you heard of the new mini keen? I just got the 14c28n version and it's a gem.

I wish they would come out with a model with more grip. I love mine added no slip stair tape and it’s a slicing machine.

This is, without a doubt, a knife.

I experienced this video and had thoughts and now I am noting that here

The egg slice made me snort.

I own that knife. I LOVE IT!

Looks like it passed the egg cutting test. That's a pretty good knife.

What is the fantastic music playing during the cutting test? I am very happy with my qubit

It looks like a smaller Sencut Serene minus the flipper tab.

That clip where Pete cuts the egg… 💀 😂

Was that Final Fantasy 13 music around the 3:20 minute mark? Niiiiiice.

now *THAT’S* a knife 🔪

My favorite part was when you cut things

I usually don’t press ‘like’ before watching the video. Usually.

Cats can be so cruel, but this one went above and beyond in not even permitting you to peel the onion first. So heartless! So evil! So cute!

That is a real pocket knife. Literally.

"AL-YOU-MENI-UM scales" 😂 sorry, I love the British & Australian pronunciation of aluminum

Good, thx

Toujours aussi cool ! 😉

Back in the 70s during fraternity "Hell Week" raw onions were referred to as "Happy Apples"! And after eating a Happy Apple, one is usually forced to sleep alone.

What other steels get in the 250 cut range?

Never liked a video so fast.

Came for the title and thumbnail. Stayed fir the FFXIII soundtrack.

I like the Civivi Altus myself.

Is this knife a better/similar option for a BM bugout?

Pretty dang neato

I might have missed it but what sharpener was that?

Onion beer breath. I hope you weren't too cold sleeping on the porch that night. 😅

It would be nice if Worksharp would send you a ken onion belt grinder so you can easily aharpen and test your big blades, like that bent coolina cleaver

Which sharpening system is that in the video?

So knife! Much edge!

Awesome review 😂 Not really a knife for me. Love the aluminium handle and the patina it takes though ❤

That hook next to the thumb stud while in the closed position looks like a great place to pinch your skin in 💀

Well I want one. But what's new?

I’d like to see a comparison of this knife against the We Knife Banter

Yay onions!

Hoodie details?

Or you could get a Cold Steel Rajah 2 and get those 2010's feeling all over again... omg zombies! Never fear, 6 inch blade by 4.8mm chonk, awesome ergonomic handle.