I'm doing my homework to upgrage my 10+ year old pc setup. Your videos are helping me a great deal to plan my build. The aesthetics, smoke and attention to detail have been a learning experience. And this is comming from someone who has been building his own pc cases since 1995. Keep inspiring everyone Matt, you are an artist. Saludos de Monterrey, NL, MX. Gracias!! 😊
So glad to see mATX getting some love, I still hate front power supply locations but this case put in some attention to make it slightly less bad. The PSU still looks crooked and id much prefer a floor or ceiling mounted psu.
I hope you have a lot more videos for us in the future because these just keep getting better and they are excellent springboards for learning how to build a PC and on components. Thank you, thank you.
Dude I'm so glad you did this build...I have this case in white sitting in the garage waiting to buy the rest of the other parts. Great work as usual Mr. Lee!!!!!
Very well produced video, I honestly love the case! When I get around to building a PC in the future, I'm almost certainly going to go with this one. It's just way too good looking!
As always a perfect assembly. Congratulations @Mr Matt Lee! I liked Jonsbo's idea of doing the intake from the rear directly into the VRM. In fact, I have a Jonsbo D31 which is very good and beautiful with the front screen. I highly recommend the brand.
love mi some small builds, jonsbo have amazing itx cases also it would shorten the build process for sure, but I just like to watch people build on it so I would love you doing it almost 200k man, hope you get there soon!
I have this case in white and applied a dark window tint so you cant see inside until the rgb turns on. Have been waiting for you to do this case just to see how you orient the fans and see the smoke test, was so happy to see you configure it the same way as me, i feel validated now 😂. Love your builds
Cracking wee build. I just bought that GPU two weeks ago I have been impressed. Bought it for 3 fan cooling at a certain size and it does the job nicely.
Hello from Canterbury - watching this from the UK this week :) I salute the skill involved in building an mATX rig in something so small. I just switched my gaming HTPC to a Lian Li Dan A3, and that is as small as I can go hehe.
Nice! What other supporting hardware are you using and have you found the rear intake with an air cooler to be adequate? We plan to do something similar in the near future :)
Its a 7800x3d and a 4090 FE. Because the FE Blows hot air up i change the direction of cpu air flow backt to front. GPU only gets fresh air and cpu too. Hot air gets sucked out by 140s noctua. Also mouted the loki on the sideplate instead the Front (with the bulky cage)
Great job, it's looking awesome! I'd love to see you give the Streacom DA6 build a shot. It’s a bit different from your usual stuff, but the case has endless possibilities, and I’ve seen some amazing builds with it. Super curious to see how you'd approach it!
this is a good looking compact matx case i've been eyeing for a while. it's only 20L. Matt, please check the jonsbo TK-0 (Itx). Would love to see it. As always content qualtiy are top notch.👏👏👏
Very nice, love a nice blackout build. I don't usually like mATX cases but I actually like this one. Not much bigger than a CHG160 but a lot better compatibility.
Micro ATX and Mini ITX cases are so beautiful; I really want to build one of those. However, I’m a bit worried about temperatures, as I enjoy making 3D animation and sometimes temperatures can get high during the rendering process.
Finally🙏🏻🙏🏻 Thank You! Yes it’s perfect! I’m using this case with Rog Ryujin iii Aio and full of Noctua fans.. (7800x3D RTX4080) Edit: Side mount sfx-l psu is much better for gpu room.
Loved the build, might be one of cases to consider for purchesing, only thing holding back would be psu location, the cooling makes no sense for me atleast and with rear fan blowing in 🤷♂ but then again its coming from person who like stealth/silent build rather than mesh/tempered glass builds
Great video. I built the same system except I used the same MB for Ryzan B650 and the 7800X3d. I could not get the standard 120 mm fans in the bottom because there was no room with the GPU. I have the Asus dual fan 4070 super. I had to order two slim fans to fit in the bottom to clear the GPU.
Ааа наконец-то этот корпус) Хоть он и толстоват (24 литра объёма), но я все равно считаю его лучшим компактным решением для бюджетных сборок потому, что с установкой дешевых мАТХ материнских плат и АТХ блоков питания не возникает никаких проблем)
was about to buy this a few months ago, but figured I'd get tired of the square grill/pattern aesthetic real fast I hope Jonsbo releases a cleaner version
Great video! Can you try to find a case that's similar to nerdware yocto? Looking for a mid tower classy case, but the only thing I can find is the fractal North.
Any chance you'll ever look at the SAMA IM01 Pro?👀 I've been wanting to build an all black build in it with the NH-D15 and possibly 3d print some air ducts for maximum cooling
Looking at doing a new build for my wife, she's currently using a GMTek Mini PC w/Ryzen APU 7840HS/780Mgpu for work. But she wants to do Knitting videos of figures and wants a small system with a dedicated gpu. Hopefully the case comes in Soft Pink/Matcha Green or Pastel Colors....🤔 If not might have to spray paint.