This Oil Filter DESTROYED My Engine Wix xp, Mobil1 or Fram ?

Подписаться 100 тыс.

Просмотров 519 тыс.

50% 1

After I cut open these oil filters I was STUNNED! Proof wix xp oil filters & Mobil1 isn't the only oil filter you need to see cut open but also the fram tough guard oil filter even K&N oil filter in comparison to supertech oil filter. We even review Fram ultra synthetic vs wix xp. Best oil filter mannol? or bosch oil filter even Microgard oil filter.
NO SAFE oil filters? Today on Nates interactive auto we show the engine oil filters that are supposed to be known for high quality. Unfortunately that is easier said as we show why opening The Mobil1 extended performance motor oil filter. Next Fram ultra synthetic oil filter. Even more unbelievable The wix xp extended performance. with today's extended drain intervals oil filtration is more important than ever. Do not use fram filters? you decide for yourself. oil filter review with royal purple, amsoil and many other brands you must know about like super tech oil filter. best oil filter or oil filter comparison you decide like purolator oil filter and synthetic oil filter. good oil filters such as k&n oil filter also tested napa oil filter plus stp oil filter. we not only find the best but worst oil filter. check bosch oil filter review.who makes the best oil filter,find worlds best oil filter.
#Nia #oilfilter

Авто/Мото

Опубликовано:

25 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 690

@TakeDeadAim 3 года назад

Where's your destroyed engine????

@dgriffin6074 3 года назад

The biggest problem with your review is that, although you did a lot of work, the viewer cannot draw a conclusion about which filters are best.

@rick-kx7gy 2 года назад

Motorcraft

@skippy710 2 года назад

@@rick-kx7gy motorcraft is not even in the video.

@skippy710 2 года назад

The guys on engine masters tv show did a oil filter test reving up engine high rpm putting oil through and testing the flow and HP and all the engine specs change using different filters. Some filters filter better, some filter less and give more HP.

@slothfish 2 года назад

@@skippy710 So which one was best?

@skippy710 2 года назад

@@slothfish I use micro guard because we use those for customers oil changes at my work. Micro guard works but wix probably the best flow best HP but I drive 4 cylinder so I don't care what I use I do my oil and everything on time. 234,000 miles on my car just change oil regularly

@sirich7751 3 года назад

Not one of these videos ever discusses the filter mediums ability to filter.

@danniefowler7271 3 года назад

This vid is so confusing your talking about one filter sometimes and holding up one or two others so confusing

@Locomedic1 3 года назад

Very confusing !!

@bluehorseshoe7171 3 года назад

He's just rambling,...and rambling,....and rambling on. If anyone could make sense of his results, then post it, that would be great.

@rayrobinson3015 3 года назад

What's sad is that some people will actually listen to this bullshit video! Wix filters are, and always have been the very best you can buy! Tune in again next week when he investigates Bigfoot sightings inside the Whitehouse.

@itptires 3 года назад

@@Locomedic1 yep this guy has no clue what he's talking about. As soon as he said that the hole in the nut of the k&n was to tie a piece of string so that if it falls off it doesn't hit another vehicle 🤦‍♂️ it's called safety wire keeps it from falling off LOL

@robertwemberly923 3 года назад

@@rayrobinson3015 nice to meet you mr. WIX!

@grivolas2144 3 года назад

What I would like to see is a real world comparison. Put them in a car for so many mile and test the oil for particle size and flow rate.

@fire58372001 Год назад

I agree with what you say. I used to drive across America 6X a Yr. for the past 12 Yrs. I met a guy in San Diego who does old cars for movie stars. I told him what I did & what would he recommend? He said Mobil-1.

@rolandcaldwell1824 3 года назад

Been using fram oil filters forever. On my honda. 350,000 miles. Using quality oil and changing it every 7000 miles is the most important part

@roccomiers477 3 года назад

A lot of issues and potential problems were discussed, but I have never personally experienced a problem with any oil filter I have ever used over 45 years.

@marvelharris9540 Год назад

exactly, Ive yet to see someone directly link a oil filter to a ruined engine

@mbsnyderc Год назад

Because changing your oil is far more important than what filter you use.

@Liberty4Ever Год назад

A bad oil filter will almost never destroy your engine immediately. An oil filter that doesn't work well will cause excessive engine wear. Just because an oil filter doesn't immediately destroy your engine doesn't mean it's a good filter.

@mbsnyderc Год назад

@@Liberty4Ever It wont do anything as long as you change your oil and filter before you need to.

@mnrodriguez Год назад

Same here! I was thinking about that while I was watching the video. lol

@rus19297 3 года назад

This is one of the worst comparisons I’ve seen. You’re biased for a brand. You’re complaining about surface rust on metal without showing age/ manufacturing dates, you’re compliant about the effectiveness of valves without testing them. You’re complaining about dents that you don’t know left the factory that way or not. Why don’t you buy from a better store to start with and buy the newest filters you can find. Ensure the filters are dented before you purchase them. I would before I put it on my car. Come one, man. Seriously.

@providentpathfinders219 3 года назад

lol i couldn’t even figure out his bias.

@nates9105 2 года назад

He sells his channel this way, by fear mongering. You can tell by the dramatic music in the background of all his shitty videos

@jamestaylor5143 3 года назад

There's 19 minutes of my life I'll never get back.

@patdormady4452 3 года назад

You watched 19 minutes of this?It appears there's 2 failures at least.

@StratMatt777 2 года назад

In that time you could have driven to the dealer and bought a factory oil filter for $7.

@frankfarklesberry 2 года назад

I had to stop after 30 seconds, in hopes that someone would make sense out of this.

@StratMatt777 2 года назад

@@frankfarklesberry Buy your oil filter from the dealer. $5

@ryanjohnson4239 3 года назад

A warning to anyone using Mobil 1 filters, I cut one open after an oil change and found the pleats were not glued on to part of the housing allowing the filter to completely bypass. I contacted Mobil about this issue and sent photos to them. Their only reply after asking what it was installed on was to say that since I cut open the filter it voided the warranty. What a crock of you know what. I'll never use a Mobil product ever again.

@silverioarroyo5968 3 года назад

Yeah mobil doesnt make me happy with their filters or their oil either. Honestly, castrol or penzoil for winter time, and I run napa gold, fram, or STP for shorter intervals like on the old chevy which gets changes at 5,000.

@sx300pilot5 2 года назад

Mobil-1 is crap. I’ve lost a cam lobe on two different vehicles running their oil - never again. Interestingly, BMW, straight from their owners manual, recommends their own 5w-30 oil, Castrol Syntec 5w-30, or Mobil-1 10w-40. Obviously, Mobil-1 5w-30 doesn’t live up to BMW’s requirements.

@animationcrate 2 года назад

@@sx300pilot5 my E46 ticked so bad with Mobil 1, but Castrol made it run smooth and quiet. I eventually learned about oil grades and qualities and figured out the reason why "euro spec" is a thing. I eventually switched to liqui moly and it completely changed the way it ran. Never heard it tick again and it didn't smell like my engine bay was burning after a long spirited drive since. I assume it was the friction reducers and seal conditioners helping it run a bit cooler and preventing oil from burning/leaking onto the hot manifold

@precisiont5188 Год назад

Shame on Mobile 1.

@michaelwilliams-ql7pr Год назад

That's bull right there. Nissan puts M1 in my wifey car. I actually would use Castrol Syntec if allowed

@martinschulz9381 3 года назад

I've used WIX from the local NAPA for years because it's one of the better filters on the market....and they only cost a little more. Always look at which filter they put on commercial engines. (Usually WIX or Baldwin) In my many years working as a welder I have never seen a Fram on on a commercial engine. A Parts guy told me once that RU-vid did a lot of damage to Fram because they exposed them. A little surface rust is probably from moisture from manufacturing. Doesn't hurt a thing. The price difference between a good filter and a bad one is less than the price of a cup of coffee in a restaurant.

@anonymike8280 Год назад

There are not really bad filters. There are low-end or no name filters. These are good for 5000 miles, no more. A filter is bad if you use it in an application which exceeds its specifications. One of the local tire chains where I live offers a $20 conventional oil change just to get you in the door so they can sell you tires, brakes or suspension work. They give you a no name filter, meaning a brand name you never will see in a parts store or box store. This type of filter is good for 5000 miles. Stay within that specification and you will have no problems because of the filter. If you plan to go 10,000 up to 25,000 miles on synthetic oil, you have to use a filter suitable for that purpose. Don't blame the products. Blame the failure to follow the correct maintenance protocols for the products used. Myself, I use a Supertech filter and brand name semisynthetic oil with an oil change interval of 2800 miles. Will I have an oil-related problem in my 21-year-old import because of what products I use? I seriously doubt it.

@scarling9367 Год назад

@@anonymike8280 Agreed. I've used FRAM synthetic filters for the most part and it's gotten my truck from 110k to 282k with no problems.

@joe-pm3lb Год назад

well on Fram they told the truth Fram suck

@wvjeepguy8178 Год назад

You need to do research on FRAM. Their problems are well documented.

@timetryp422 Год назад

Fram is garbage.

@donaldscott7279 3 года назад

I'm more confused now then before

@joeblue386 3 года назад

lol

@stevedeleon8775 3 года назад

I've used Mobil 1 Synthetic Media Filters for years now ...and have never had problems here in Southwestern Arizona 🏜

@brucebeauvais1324 3 года назад

Basically in the U.S., there are four filter manufacturers. Champion Labs, Fram, Mann & Hummel, and Baldwin. Mann & Hummel owns Wix and Purolator . There is a lot of contract manufacturing by all of them. Basically the filter manufacturer offers a variety of options for the anti-drainback valve, element, and relief valve. The company buying makes a choice to meet the price point they need.

@mototour08 2 года назад

Champion labs also makes Fram via their allied signal nameplate

@vincemajestyk9497 Год назад

Three. Champion Labs and Fram are both owned by First Brands/Trico, Per the previous comment, Allied Signal is no more and hasn't owned Fram for a long time. Honeywell bought out the Allied Signal Fram/Bendix/Autolite consumer lines in 1999 or so. They sold it recently to Rank group a private investment group in 2011, then Rank sold it again in 2019 to Trico (First Brands).

@User-cc6cq 3 года назад

Life is like a box of filters...

@alex4given808 3 года назад

We'll never know what we're gonna get!

@User-cc6cq 3 года назад

@@alex4given808 👍

@lancenorthcutt7813 3 года назад

🤣💯

@bluesmurf6142 3 года назад

@@alex4given808 yes you do all you got do is read and do research

@alex4given808 3 года назад

@@bluesmurf6142 we try different filters too.

@AntonioClaudioMichael Год назад

Wix, mobile 1 and K&N are the best filters there hands down

@michaelchueh Год назад

I have been using Mobil 1 for over 12 years. So reliable. I haven’t really seen another filter to upgrade too. I did think about Bosch and will dig further. I will say I will be moving from Mobil 1 synthetic oil to Penzoil Ultra Platinum.

@AntonioClaudioMichael Год назад

@@michaelchueh Penzoil Is amazing oil for the price I'm sure your going to love it you might even see that is seals and runs smoother then mobile 1

@ronaldmeldrum5576 3 года назад

I run Mobil 1 synthetic for a year and change my AC Delco or WIX filter every 5k miles. Have been doing this for over 40 years and have never had an oil or filter related problem on a single vehicle that I have owned

@scottward7813 3 года назад

Thank you Ron...a voice of experience!

@opera93 2 года назад

Thanks… Interestingly , I do about the same…….though, complicated by Buying a DEALER,“ lifetime Oil Change program “ buying Journey 2015 * (**first time using Dealer, for me)…. change out the PERFORMAX OR , *Pronto Filters ( *last OIL CHANGE).. to PUROLATOR BOSS, on Both vehicles,(* was NAPA GO,D/ WIX gererally for five ++ years)** !,, I Appreciated, the BOSS , or Royal Purple Filters more………..

@sx300pilot5 2 года назад

I’ve lost a cam lobe on two different engines running Mobil-1. Their 5w-30 is crap. I’ll never use it again. Even BMW doesn’t recommend Mobil-1 5w-30. BMW recommends their brand 5w-30, Castrol Syntec 5w-30, or Mobil-1 10w-40. Obviously, Mobil-1 5w-30 doesn’t fulfill their lubrication requirements. I’ve run Castrol Syntec in every engine I own with Wix XP filters and have not had any issues since switching.

@audiogman5865 3 года назад

Where is the destroyed engine and which oil filter destroyed it?! Might as well have had Porky Pig explain all this to me.

@landofthemorningcalm-ri9rt 10 месяцев назад

I'm glad I wasn't the only one who didn't hear which one "DESTROYED My Engine..."

@wafflesnfalafel1 3 года назад

I've changed my own oil for 20 years and used all those brands except the K&N and have never had one fail or had a problem. I do change them with each change and do that regularly. The only issue I've ever had was a couple times with dealer mechanics over tightening filters. I know there is a Fram hatred club, but I've never had any issues with them.

@tthealer 2 года назад

I'm with you. I'm 65 years old been changing my own oil forever. Never had a "fail" because of oil filters, but I don't run them 15K miles either. Typically only about 3K. I think a lot of mechs only see the worst of the worst sometimes...

@Oscarphone Год назад

I have had cold start up knock with Fram which usually is from drain back.

@EsteOeste-vw7ps Год назад

I got lucky, used to use Orange Frams for years, and my corolla is still going. I did my oil changes every 2000 to 3000 miles though. Switched to Purolator and Bosch a few years ago.

@alexjenner1108 Год назад

@@Oscarphone I had the same problem with Fram, taking too long to build up oil pressure on startup due to faulty anti-drain.

@gcash2074 3 года назад

They sit around to long and with temperature changes the metal gets condensation on it and gets rust on it. That little bit of rust will not hurt anything. It's a oil filter it will filter it.

@LoveLikeaHurricane 3 года назад

And the cardboard box they come in can absorb moisture which doesn’t help.

@NATESINTERACTIVEAUTO 3 года назад

If the containments are on the outside of the filter medium inside the filter you will have it make its way to the engine. Also depends on size of containment and so on.

@NATESINTERACTIVEAUTO 3 года назад

Very true

@faxmen09 3 года назад

Exactly. The minor surface rust (if that's what it is) would in all likelihood be the result of the storage environment of the filter. Highly unlikely it's coming from the factory that way. I use Napa Gold (Wix labled), nothing in this video would cause me to change that practice.

@matthijsverweijmeren6114 2 года назад

Contaminants in the centre cavity of the filter are dangerous because the flow of oil is from outside to inside. Perhaps they should apply some storage oil to prevent rust.

@SupraFootwear2013 3 года назад

This dude takes 6 years to get to the point

@CabanaD 3 года назад

Play at 1.5x speed. He does a lot better that way.

@manoweb1 3 года назад

hell there wasn't a point! Other than nobody can make a good filter, according to the filter master....

@boydmerriman 3 года назад

For a few weeks, I worked at an oil filter company in Greensboro, NC and I noticed that the caps are the same for many brands of filters.

@YeOldeTowneCryer Год назад

There is a video where a guy pumped contaminated oil through numerous filters, then sent the oil into a lab for testing. Cutting a filter open to see the guts does NOT tell us how good a job it does at filtering out impurities. That video showed that Wix, Mobil one, and Fram were at the top of the list. So buy what's on sale.

@lloydmorrison5979 Год назад

My mechanic rebuilds at least 1-2 engines a year due to Fram comming apart and blocking oil passages. WIX and Napa Gold, which is made by Wix is OUTSTANDING!

@franchisefred4066 Год назад

FRAM orange can hater 😂 You’re just another bad apple that’s all hehe

@shawnthomas7404 Год назад

bullshit

@harvdykstra4912 17 дней назад

Isn't Microgard the same ALSO?

@SKCCP 2 года назад

I have been using the cheapest oil filters I could have found in auto parts stores for the past 20+ years. Super tech filters from Walmart have worked just fine. My 20 year old 2001 Camry LE V6 with almost 200,000 miles does not burn/consume oil. Looking at the fiber filter media, I can see that Super tech filters are better than Fram filters are.

@k0lge Год назад

Yeah I can't do that on my bmw 😭

@user-iv5vx7gw4y 15 дней назад

Really, when you consider it. How many people have had to claim a suit against any filter manufacturer under normal conditions? They all must meet approved specs. Change oil at manufactures recommendations and you won't have issues un,essentially under extreme conditions. Any engineer worth his salt will tell you that.

@waydel4 3 года назад

I changed my oil every 15,000 miles and every 5000 miles change the filter and top off the oil level. I used synthetic oil, no particular brand and whatever filter was on sale or Fram. Checked the oil level once every 2 weeks. Did this for over 40 years and never had a oil related problem.

@dannyo6699 Год назад

I do run the Fram Ultra Synthetic filter in all my vehicles. It's overall the best filter media being a double lined media and fully synthetic with an extended life rating, upwards of 20,000 miles. Personally, I don't run that long between oil changes. As to the rust in the filters, I don't consider that to be a big issue because all modern oils have anti-rust additives as part of their additive package so the rust would be countered immediately. The glue is a product of trying to adhere 2 different materials together. It usually takes more glue and more expensive glue to make the 2 materials connect. The broken piece inside the one filter notwithstanding. As for the 2 other Fram filters, the PH and the Tough Guard, they use endplates that are of a similar material as the filter media's themselves, so it requires less expensive glue and less amount of glue to adhere them. Yes, some filters are manufactured by other companies so they will look the same, or multiple companies use parts from the same distributor so they may have parts with similar stampings in them. All are made by machine, and all may have a defect or 2 inadvertently in them, even the Wix and K&N filters are fallible. There are no guarantees in life.

@NATESINTERACTIVEAUTO 3 года назад

Merry Christmas!!!!! 🎄

@dgunearthed7859 3 года назад

You too!

@coryshook9634 Год назад

I'm not sure a little rust defines a bad filter. It all depends on where and how long it was stored and the humidity it was exposed to. If it was drenched in oil soon after manufacturing it wouldn't rust. It's also something you can't really avoid.

@alexjenner1108 Год назад

True, rust might indicate filters sitting in a warehouse for a long time and not specific to a particular filter brand.

@stevedeleon8775 3 года назад

When I worked for a Caterpillar Dealership(Empire) here in Arizona we cut open our Caterpillar Filters and found Heavy Duty screened pleated Filter media and Spring Loaded Anti Drain Assy...They are manufactured by Honeywell Allied Industrial

@johnhugo886 3 года назад

What are the micron values of these filters? Knowing how small of particles it can filter out and not let back into your engine is what I would want to know.

@jjreal9910 Год назад

From an HVAC viewpoint, some new designed filters that are filtered to smaller particles can slow down the airflow which makes the furnace work harder equals less life of the unit. smaller micron restricts air flow. I don't think restricting oil flow on an engine would be a good idea.

@MachuPichuu Год назад

That's why the filters have bypass valves. Depending on the design of the fins they could filter better and Hold more debris. Probably a reason why you shouldn't run a filter with smaller micron filtration for an extended period of time. Though I seriously doubt any filter after 6k miles would be"full"

@baby-sharkgto4902 3 года назад

Merry Christmas! On the K&N, the idea of the safety wire is to PREVENT it from spinning loose, not to keep it dangling after it unscrews itself. I love that you made this video but I am heartbroken to see the K&N is not all that because that's what I use on all my cars for the past 5 years. Prior to that I always used the Phram because of the awesome grip material to grab. I have never had an oil filter related problem........ or have and just dont know? lol Now I will ha e a sleepless night as I digest all of this info! Thanks again and Merry Christmas and Happy New Year!

@NATESINTERACTIVEAUTO 3 года назад

Thanks for your kindness and information happy new years

@jakemason9436 3 года назад

Don't worry the oil will take care of the rust. Thanks Nate.

@joelsmith4816 3 года назад

So what's good? I'm confused.

@stevedeleon8775 3 года назад

Joel Smith...Mobil 1...Wix XP...30+ year ASE Certified Auto Technician..

@kc-g5764 10 месяцев назад

The Fram and K&N oil filters have been the oil filter of choice for many years. I do regular oil changes (5,000 miles) and have never had an engine failure. however I want to commend you for doing this video in orser to provide the information in regards the pros and cons of the presented oil filters.

@tedinskib5234 3 года назад

WITHOUT WATCHING THE VIDEO, I'LL TAKE A GUESS AND SAY IT'S THE BRAND THAT I'VE BEEN USING FOR OVER FIFTY YEARS, WITHOUT A SINGLE PROBLEM! FRAM. ONE SMALL COMMENT, "I AM DONE WITH THESE RIDICULOUS COMPARISONS"!!

@tthealer 2 года назад

You know, I think the only way to really find out which one is best, would be to set up a machine that would run dirty used oil through a filter. The oil could come from multiple vehicles. Have a lab test the batch. Then run a specific amount through the filter, take a sample. Do this on multiple filters, send the samples to a lab, and see which filter removed more contaminates. The proof would be in the performance, not just an opinion of what feels better.

@brucebaraniak4510 2 года назад

Best comment ever . You are so right . The only way to test performance.

@dennisgarber Год назад

I was going to post the same idea.

@ninjajunpei1984 Год назад

The machine you mentioned could easily be a mule engine on a test stand. But it would have to be set up to be able to be put under load as well. This will not only be good for testing which oil filter is best, but also the engine oil if you wanted to get that in depth with the testing.

@barrywells2577 Год назад

This would be a good idea if particulates (dirt) were the only thing in "dirty used oil". One of the chief reasons oil turns color (other than dirt) is oxidation caused by excess fuel during cold starts, and moisture not boiled off by short trips. Oxidation isn't reversed by changing the filter the oil is run through. So while you may catch some dirt that hadn't been caught by the previous filter, it wouldn't be the definitive test we'd all like to see. That being said, I'm definitely not a fan of the orange filters unless they're from the HP series like The Top Fuel guys use. And I've never seen a store selling them! Meantime, anything with the metal end caps is better, at least the oil goes through the filter media!

@alexjenner1108 Год назад

You should also purchase 100 filters of each type and test cold start time to build up oil pressure, the true test of the anti-drain valve. Report both the worst results and average of the 100 filters to account for variations in manufacturing.

@Roscotech 3 года назад

It seems to me that the “bean counters” have as much or more to do with quality than anyone or anything. You have a quality component (oil filter in this case) with a solid reputation and instead of either improving on it or leaving it alone the trend becomes figuring how to make it for less money. Or another company purchases the company making said “quality” component and does the same thing. I repair cars for a living and see this happen with automobile manufacturers.

@nhmtrhd 3 года назад

I agree the vid is confusing. Also PLEASE UNDERSTAND that the hole on the end of the K&N filter is NOT there as a wired tether to keep the filter from “hitting a vehicle behind you!” It is for “safety wiring”. To keep the filter tight and not twisting off by itself! It is a common technique used on critical components such as aircraft and even nuclear power! Thankyou.....

@philc.9280 Год назад

I've said this for decades as a DIY car mechanic having owned or leased over 30 cars, vans, and trucks over 40 years. I buy whatever filter is on sale and use mainly synthetic oil from Walmart now. Years ago we'd change the oil every 3K miles. Now with synthetic and modern engines I only go 5-7 K. Never, ever had an oil-related problem. My point is frequently of an oil change is the best care for your valuable car NOT necessarily the brand of the oil filter ( Yes I use fram too).

@hotrodray6802 3 года назад

SuperTech (WM) is made by Champion as is KN. The KN hex, safety wire hole, and thick body should tip you off that these are Champion aircraft filters. Champion also makes many private label brands. Mopar, AC, NAPA, OReilly, AZ, and others. Some stores will argue, but.... Its like saying GM makes Cadillac and Chevy brands, so all Chevies are really Cadillacs.

@stopher1971 Год назад

I see a lot of things that absolutely do not matter in its performance being covered, and quite a few things that do matter, not being covered

@robertmaybeth3434 2 года назад

I really like that you weren't afraid to name names for once, so many people making these kind of vids seem terrified of pi$$ing off somebody or some company so they dance around it, drop hints and expect you to figure out who... thanks for coming right out and saying the company names! So I know what product to AVOID.

@rjacobs1200 3 года назад

Very interested information. Merry Christmas

@williamwaters4506 Год назад

The question is - how well do they actually filter dirt?

@pi1797 3 года назад

Can you cut open a Purolator One and Purolator Boss oil filter??

@carbideblue Год назад

Amsoil seals their oil filters in plastic film in the box. It is likely to reduce these rust problems, which could be a product of the amount of time the filter has been sitting on the shelf.

@rotfan77 Год назад

Awesome video would have been nice to see an overall conclusion. In my mind it seems like there’s faults with all of them and none of them look like they are the clear winner. Which one do you recommend?

@yambo59 3 года назад

My guess is that glue is designed to handle engine oil temps, but yes if it came loose who knows what would happen. Looks like we have to check these things each time we do a change. I have always had a lot of faith in Wix, supposed to be one of the best. After I discovered Frams use the cardboard end caps I stopped using them years ago.

@zachwilson9608 2 года назад

O lol POP in m q

@MachuPichuu Год назад

Fram ultra synthetic uses metal end caps

@schickmann 3 года назад

SO WHICH ONE DESTROYED YOUR ENGINE ?

@miltonfaber1248 3 года назад

A filtering test would be a real test on filterability.

@erwinallen2309 3 года назад

Good video. My question is is there much of a difference between the numbers as a lot of filters will physically fit my car but only one number is listed as the right one.

@jeffhicks1008 3 года назад

I always buy the prettiest one and in 50 years have yet to lose an engine, have never heard of or seen any engine that has come thru my shop that was destroyed by a defective oil filter. If your engine has a high volume oil pump on it ( that you are aware of) then run the cheapest filter you can buy, but if your engine runs a high pressure oil pump then buy a better quality oil filter usually a Wix. If you are that worried about filtration then install a duel remote oil filter bypass kit made by Amsoil.

@domlab9109 2 года назад

i put a bent filter on a car once and the engine sound was bad after a day. i changed the filter no more rough engine noise and ever since open my oil filter package at the store and check for no dents .

@Thomas-jj1zo 3 года назад

seen this stuff so many times - don't care what's inside, show. which filter makes the engine last the longest?

@maxenielsen 4 месяца назад

My 2013 4Runner’s engine has everything but the filter medium built permanently as part of the engine. Thus all choices about filtering, for me, are about the replaceable filter medium. No questions and worries about the bypass valve or rust, etc. I use K&N filter medium units, though I only started changing oil myself about 100k miles ago. We’ve done oil changes every 5000 miles, and the car has 435k miles on it with no engine problems.

@juicebox22a 3 года назад

Makes me love the cartridge style oil filters on my cars. No rust. Can easily be inspected upon removal during the change. Great video 👍!

@edwardautrey3671 3 года назад

Good point 540i .

@taz4100 3 года назад

The problem with cartridge filters is alot of cars are very limited on the amount of filters available.

@thetechlibrarian 3 года назад

Never thought of that. One good thing at least

@NATESINTERACTIVEAUTO 3 года назад

Great point thanks for sharing

@NATESINTERACTIVEAUTO 3 года назад

Which oil filter is the best?

@apoloforever01 3 года назад

personally i only use Hyundai OEM filter and i never had an issue or rare sounds.. engine have 111,000 miles and still strong and running smooth.

@NATESINTERACTIVEAUTO 3 года назад

Thats actually what i have been using lately and im going to see if i can tell a difference after using i will cut open. I cut open the Hyundai oem and they are quality thats why i decided to give them a try. What would you suggest we try next?

@apoloforever01 3 года назад

@@NATESINTERACTIVEAUTOthanks for keep uploading interesting vídeos i had seen you testing a lot of oils and aditives i hope maybe you should try how it works products who claims to clean catalityc converters.

@davidstark8894 3 года назад

Thanks for the time that you put into this video and letting us know the facts.

@CWB1863 3 месяца назад

I have a six pack of Purolator Boss filters that i store in zip lock bags with a couple silicone packs just to be on the safe side. Great video.

@magmomwise 11 месяцев назад

The Fram Ultra Synthetic has been my filter of choice for years. I do regular oil changes and have never had an engine failure.

@nickv4073 6 месяцев назад

I've never used Fram Ultra Synthetic and I've never had an engine failure either. See why your comment is irrelevant?

@TheMatt4840 3 года назад

Great video....i normally go wix..

@gman9033 3 года назад

SUPER TECH IS JUST AS GOOD OR BETTER THAN MOST OTHER FILTERS AT A FRACTION OF THE PRICE, I'VE BEEN USING THEM FOR MANY YEARS AND NEVER HAD ANY ISSUES WITH THEM.

@NATESINTERACTIVEAUTO 3 года назад

Yeah i see no problems with them as they are made with quality. What should we try next?

@hotrodray6802 3 года назад

@brucebeauvais1324 3 года назад

@@hotrodray6802 Champ Labs also makes some AC Delco filters. Almost any filter that has an open black plastic cage as the inside support for the element is made by them. The have a patent for that feature. None of the filters Nate reviews here have that feature because of the application.

@shimmerdetail1 3 года назад

@@brucebeauvais1324 I really like that plastic open cage design. Seems much less restrictive than other designs and I've never seen a problem with them when I'm changing them out. Interesting point on champion, I didn't know that. Thanks.

@Jdres123 3 года назад

I installed one on my jeep and the oil pressure gauge was pegged at like 80PSI ,drove to the store and bought a Motorcraft and it went back to normal.

@redracer1985 2 года назад

2006 GMC Sierra 1500 with a 4.3 V6 under the hood, and I use WIX for the filter, and Castrol GTX for the oil.

@dmartin4414 Год назад

Lots of work, time and effort put into this video review. So, which one is best? No way to draw a final conclusion.

@garyo2885 3 года назад

Nate it's guys like who, use their time and money, for us users of the products you review. It's guys like you that make YT invaluable. A sincere thank you.

@ApartmentKing66 3 года назад

Is your check in the mail?

@mweskamppp 2 года назад

So, how do you know the car had the regular oil changes the workshops wrote down and got payed for? how many miles were on the filters? Do they all have the 5 micron particle size standard?

@StupidBlokeStupidVideos 3 года назад

I tend to find that Snapchat filters are the most effective at filtering out impurities.

@baby-sharkgto4902 3 года назад

Facts

@abelq8008 3 года назад

I usually just pray alot.

@gdholmfirth 2 года назад

I missed it. Which oil filter destroyed your engine? And what was the bottom-line here?

@FNPetersen 3 года назад

It's no secret that wix started making microgard filters years ago. And yes, the can is the same, but the antidrainback valve and media is different.

@Jack51971 3 года назад

How do you now it was the filter that destroyed your engine?

@chadrogers8443 3 года назад

Very good videos... MANN+HUMMEL is the owner and manufacturer of wix, purulator, and it's looks like Bosch too... Hey can you cut and compare some OEM filters, like Hyundai, Toyota, Honda, and some ones please???

@randalltaylor3700 3 года назад

Mann also is the manufacturer of Hyundai

@greenspiraldragon Год назад

What it looks like don't matter its the micron rating and efficiency you should be looking at. Rust is from storing them in humid conditions it won't affect the performance.

@mikefung4447 3 года назад

After listening this guy talks, I still confused of what he said. I read other readers' comment ,I come up with the same result. He should be more specific and to the point.

@Really-AintBuyn-nit 3 года назад

The hole in the K&N isn't for a string in case it falls off. LOL! It's for a safety wire like they do on airplane components so it can't back off. Pretty much at 14:00 so far I think you don't know a whole lot. Where's the Purolators?

@marcgovenor8136 3 года назад

If he the hole was to keep filter falling off and hit car behind you, cant think he alot of experience

@larryechols6060 3 года назад

I’ve been using the K&N filter on my Subaru without any problems. They’re also much easier to remove because of the nut on the end of the filter.

@micahwest5347 3 года назад

If I can get a grip on the filter I have had 100% success using the age old forearm muscle.

@steved8714 Год назад

@@micahwest5347 Not a chance, it's a hydraulic seal sometimes, they just don't budge sometimes.

@micahwest5347 Год назад

@@steved8714 like I said, “I” have a 100% success rate. Fly me out next time you need help. Or save yourself some money and do grip/forearm exercises regularly. It’s not like you even have to get close to a captains of crush level of grip strength to be exceptional and stand out in our pampered modern society.

@michaelwilliams-ql7pr Год назад

I use a wrench, so there's that -no use going crazy to remove a filter 😅

@toddsmith1617 8 месяцев назад

What walmart are you shoppin at? I haven't seen one of those machines to search for a filter in at least 8 years.

@cars654 3 года назад

I have been using Wix for over 10 years and have never had any problems.

@profightersports 3 года назад

Ok so what filter was best??

@dfields9511 3 года назад

Thanks My goto filter is supertech st6607 since the car it is for oil change is 3-4k miles. Secondary is FRAM PH7317 I wouldn’t use either for 10k miles that they claim. Maybe 5-6k Max. I did use to use FRAM filters years ago never had any problems but I was always changing every 3-4k miles. Then I wised up and found better filter that was cheeper.

@user-mp3fj6xt9w 2 года назад

Which other filter?

@timdiver53 3 года назад

I've seen surface rust, don't think will come off, it should stop when oil gets in it(unless you have water in your crankcase).

@joebwell6315 3 года назад

I use K&N never had a problem and I love the nut for east removal.

@stevedeleon8775 3 года назад

We used K&N AIR & OIL filters in our "Late Model" class race car with a 350V8/ 400 hp. small block chevy and never had problems

@fernandobriseno8164 3 года назад

I used to use K&N then ended up getting a faulty one. I always do a test drive after every oil change until it gets to temp to build up pressure and check for leaks. No leaks noted. One day at work as I was walking out to my truck I noticed a drip pattern coming down the road straight to my truck. I had developed a leak. I had to really crank it down to stop it which didn't sit well with me. Luckily I hadn't lost more than a 1/4 qt before I noticed. I had to switch after that. Not saying they're bad but they let me down.

@wilde.coyote6618 3 года назад

@@fernandobriseno8164 Me too fern. My k&n had a tiny cut on the o-ring, and leaked only a small amount when under pressure. Never noticed until I washed my motorcycle. I am all done with k&n.

@joemiller2057 3 года назад

Yeah I want to know so what oil filter do you recommend cuz your video is a little confusing

@StratMatt777 2 года назад

The ONE thing you should buy from the "stealership" is an OEM oil filter.

@skipjohnson7780 3 года назад

The hole for the string is actually safety wire to keep the filter from turning and backing off the thread

@kh2140 2 года назад

I've been using Purolator one. Out if the ones you've shown I'd go with either Bosch, both wix's, or microgaurd. I believe all three are made by the same company anyway.

@NATESINTERACTIVEAUTO 3 года назад

My personal choice for the best oil filter is the Wix xp and for cost supertech

@Albert-fg4kj 3 года назад

Could you please elaborate in details why it is your choice? Thanks

@dgunearthed7859 3 года назад

@@Albert-fg4kj I agree, Nate could you tell us what features of the xp makes it your fav? Thanks!

@Banditt42 3 года назад

the XP is for synthetic so make sure you get the correct filter for your oil. Napa filters are Wix and the Napa platinum/Wix XP are my filter of choice because I have 8 vehicles and have used them exclusively for years and years and have never had a problem. I have no other reason as to why I prefer them, just because if something is working great for me why change?

@NATESINTERACTIVEAUTO 3 года назад

If it ain't broke don't fix it. What would be a good filter or a way to test the filter?

@NATESINTERACTIVEAUTO 3 года назад

The filter is a high quality synthetic made for long drain intervals. The wix xp uses a steel screen for extra support to make sure the filter holds up and filters evenly. The oil bypass valve is constructed into the filter for more stability. Also they use a steel spring which will give support and you won't need be concerned of unfiltered oil making it through like filters with stamped steel that becomes bent not holding the filter contents tight and properly aligned.

@johnwalters7415 3 года назад

What filter so you recommend

@Jumpnjacksdaddy 3 года назад

He sounds like my grandpa telling me a story until I went to sleep which took about 3 minutes cause his story was boring. This was when I was nine. Now I’m 55 and this video put me to sleep in 3 minutes. Lmao.

@doncarlson8391 3 года назад

Where's the flow rate, pressure drop, efficiency, cleanliness (ISO code), burst etc. testing? You make some valid observations but would like to see actual tests and data to back up your opinions.

@NATESINTERACTIVEAUTO 3 года назад

I have hope to gain Intel on some oil filter testing ideas. I have used calipers, tape measure to check filter medium length,thickness plus housing thickness.

@PaftDunk 3 года назад

@NATES INTERACTIVE AUTO What Don is talking about is actually flowing oil through these filters to see the pressure drop/dP and figuring out actual efficiency/ISO Cleanliness with a particle counter. Both require an elaborate setup to test consistently and accurately. I have access to a lab in Germany that can do all this with just the pleat pack or the whole filter but paper/cellulose filters don't interest us. We're in the hydraulics industry (pretty much identical to automotive oil industry) and only deal with glass media. In this video the only one that looks like they're using fiber/micro glass is WIX XP. Glass is the best type of material for high quality filtering but I know for us (a small operation in the USA) to make an automotive oil filter using some of the best microglass in the world would cost $12-15 and we would have to sell it for $25-35. No one is going to buy it, even though the pressure drop is lower (allows more oil flow) and you get 4x the life out of it.

@johnwagner4559 3 года назад

I always go with wix. Never failed me yet. I change my oil and filter every 3000 miles religiously. Purolator is my second.

@toddmarsh4801 3 года назад

Two I don't like.

@rifleman1956 Год назад

Wix and Purolator are made by the same company. Both are good filters

@TheRugghead 2 года назад

What filter do u run?

@donvoll2580 Год назад

Good day from Ontario. If your filter is below motor , how can oil drain back out of filter? Interesting video Thanks

@jakkbatt4711 2 года назад

just an idea, why dont they put magnets in oil filters?

@davekarp6654 Год назад

Are u the Horse from Horsin Around?

@rcdyer Год назад

I've been using Fram Tough Guard for over 35 years on my vehicles. Have put hundreds of thousands of miles on them and never had one issue. Not one engine burned/s oil and I go an average of 7500 miles between changes.

@geraldevans2535 10 месяцев назад

Me too

@chrisphilhower6029 3 года назад

I have used Bosch Oil Filters for years. From a 2013 Hyundai Elantra GS Coupe, 15 Tucson, 16 Tucson. And now my current vehicle 2019 Kona. Also on a couple of Harley Davidsons. 2015 Street 750. And my current 2018 Sportster 1200 Custom. Never had any issues. I live in NJ. Maybe where you live is causing the rust?

@AngelHernandez-ls5wr 3 года назад

What are the best oil filters?

@jeepfan1998 25 дней назад

so what's the best oil filter I normally run mobil 1

@wesleymason8064 Год назад

I've heard him put Fram filters down, calling it the orange can of death. I've heard another utube person with videos putting Fram down, but promoting wix filters. I've been using Fram filters in all my vehicles for 45 years and never had a problem.

@kruelzombieful 2 года назад

Is it possible that were these filters are stored in a less than perfect area after they leave the manufacture then they start to build rust. Hmmm just maybe. I've worked at an auto parts store and I can tell you sometimes they are stored in less than perfect areas sometimes when they are over stocked.

@fortyseven1832 2 года назад

Anyone know who makes Jegs oil filters?

@taconobaka1688 2 года назад

How come nobody ever includes Puralator filters in these comparisons? I can say that a Puralator Boss filter that I use has a similar by-pass valve as the WIX XP, but it still has the stamped steel tensioning plate instead of the WIX type spring.