THIS Panigale is GOING TO KILL ME! [Wrecked Bike Rebuild - Ep 29 - 2016 Ducati 959 Panigale]

Подписаться 1,2 млн

Просмотров 42 тыс.

50% 1

Support the show and you could WIN THE BIKE here: wbrgarage.com
Wrecked Bike Rebuild [Full Season: bit.ly/WBRS04 ]
Season 4
Episode #29
On Site Shine: bit.ly/33dC0jk
Get your bike protected here!
In this episode of everything that could go wrong did...I mean Wrecked Bike Rebuild the guys go out for the final shakedown run of the Paningli to make sure all issues are resolved from the first shakedown. In this same trip, they also take the bike to get a protective coating...and wouldn't you know it, they found a few final things that need attention. At least it wasn't anything supercritical to the running of the bike...jk of course it was!
................................
C2W Website -- www.chaseontwow...
We build motorcycles then give them away here -- wbrgarage.com
Where I get all my gear from -- bit.ly/Ridinggear
Official Helmet of C2W: bit.ly/RurocHelmet
Use code "CO2W" for DISCOUNT
#ridepositive : rideapparelco.com
🏍 GEAR:
bit.ly/C2Wgear
Helmet -- bit.ly/C2Wrr3
Bluetooth -- imp.i104546.ne...
Jacket -- imp.i104546.ne...
Pants -- imp.i104546.ne...
Gloves -- imp.i104546.ne...
Boots -- imp.i104546.ne...
Glasses -- bit.ly/3nXSet9
**code: Chase gets ya 10% off!
📱 SOCIAL STUFFS:
Instagram: bit.ly/C2Wpics
Twitter: bit.ly/C2Wtweets
WBRGarage Website -- wbrgarage.com
🎵 Music:
All music I use for RU-vid (GREAT FOR RU-vidRS): share.epidemics...
................................
*clicking on product links above will take you to product pages and if you buy from that link you will help support the channel with no extra cost to you!

Опубликовано:

6 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 256

@clint_a_210 4 года назад

There's too much negativity in the comments. Come on, guys. They're testing the bike to identify and fix the flaws. Most other channels wouldn't even show this process. I appreciate the transparency throughout the build process, Chase. Keep up the great work.

@chillyourself5208 4 года назад

One might assume by episode 30, most bolts were properly tightened. Especially those related to the drive train ,during a test run. Just sayin, not hatin.

@clint_a_210 4 года назад

@@chillyourself5208 never assume. It was just an unfortunate oversight. It happens.

@K10wNs-Shed 4 года назад

Threadlock EVERYTHING!! You only need the weakest threadlock, but it prevents vibrations from backing threads out (and it helps prevent thread corrosion).

@redgtr 4 года назад

I know this is why you do the shakedowns but this is part of why, as much as I'd like a Panigale, I haven't entered for this one. Whatever rules you have to abide by that make you have to complete everything in a set amount of time seem to be making you guys, Brian included apparently, cut some corners. This shit is dangerous. Please don't rush anything for a deadline

@reesespeanutbuttercups5548 4 года назад

I agree but they are going to double check ever single bolt in the whole bike so that whoever gets it has every bolt torqued to factory

@Thunder_Bear_mg 4 года назад

That ceramic coating/detailing guy is so knowledgable. Good stuff.

4 года назад

At least he seems to be very keen on his product.

@zacharygaza4647 4 года назад

I noticed the chain thing probably at the same time Luke did. I was like that don’t look right and then he said something ten seconds later. Good save Luke, you the man.

@BSGSV 4 года назад

The wife of the guy who wins this bike is never gonna let him ride it.

@guille_snapshooter 4 года назад

that's why you don't get married

@reesespeanutbuttercups5548 4 года назад

Guillermo Fuentes I don’t ever plan to I control my OWN MONEY hahahaha

@Livi_333 4 года назад

The prophet speaks!!!! Lol

@Mobiusshazarr 4 года назад

Honestly, this whole bike has been nothing but a train wreck. Both from supplies and the complete lack of oversight. Frankly, what the hell is Brian doing? Isn't he supposed to be there as a master technician to make sure something this obvious isn't missed? Your build is now a cautionary tale as to what too much money and not knowing what you are doing can do.

@buggin1951 4 года назад

I thought the point of having Brian on board was so that things were done right. This is just pathetic.

@JEPPAY 4 года назад

Harsh i guess. But its gotten some truth to it.

@marazo 4 года назад

Looking back to episode 21 where they literally leave everything on those wheels finger tight, and even make a dick jokes about not torquing everything down, doesn't suddenly seem so funny anymore. Someone might have forgotten something... I mean. Both of the wheels were fooked. Either you did the torquing off camera, and you can blame it on the vibrations. Or you didn't.

@lukemctyre3394 4 года назад

We do shakedowns for a reason. We all failed as a shop to ensure proper torque specs as a whole. The blame is on no one person. This is an issue that will not appear in future builds.

@Mobiusshazarr 4 года назад

@@lukemctyre3394 i appreciate a response on a very pointed criticism. I don't think it would have been so bad if the last shakedown didn't have this same problem on the front wheel. Since i know it was for the content thst it was put up, but the second shakedown should not have been uploaded. The first time was a blind run, but this makes every current and potential Patreon supporter wary of the product you guys worked so hard on. I've been watching since before WBR even was a thing, and it sucks to see this self inflicted black eye right after watching the last one.

@alistairupton1960 4 года назад

This should be called wrecked bike almost rekt again

@plageran 4 года назад

Welcome to Wrecked Bike Wrenching, where builds take 3 years and Chase is Tavarsh under cover

@VizionzStudios 4 года назад

So I’d like to point out, that he has royally screwed up twice on this bike. Once with the front brake, and now the chain. Both are extremely important/ basic things that should be installed properly and torqued to spec . If you think other things aren’t completely fawked up on this bike, especially the more technical things you are sadly mistaken. You’ve created a death machine and you’re lucky it hasn’t killed you already in the previous episode when your front brake was falling apart down the road 🤦🏻‍♂️ this channel is a sad story waiting to happen

@oneonlyxram 4 года назад

Chase I love your content, but the things that you have going wrong are BASIC things as a mechanic you should be doing properly. Getting the maintenance manual for the bike to get the proper way Ducati torques their bolts is very important. Do this with every bike you rebuild. Do more research and get all the information you need before doing another one of these, because this is a poor attempt and ruins your credibility.

@JEPPAY 4 года назад

constructive but honest. Nice one mate :) Chase is going to be devistated when he reads these comments :( ... but its true. A soo simple thing as to torque down the chain kit, is so important and for that matter ... easy. I wouldnt ride it :(

@oneonlyxram 4 года назад

@@JEPPAY I don't believe in just saying to someone that what they did is crap. I want to help them move on from that low spot and not make the same mistake again. Having been an aircraft mech for years in the military, doing things by the book saves lives. So I hope chase reads some with a grain of salt, and others (like mine), he takes time to really learn how to do things properly. I wouldn't touch the bike the way that it sits now. Thanks for the comment man, most would think I'm just being an ass or something.

@jtmunn4496 4 года назад

You do realize hes never claimed to be a mechanic right. That's why Brian is there so not Chase's fault.

@oneonlyxram 4 года назад

@@jtmunn4496 you don't have to "claim" to be a mechanic, he put his hands on tools and performed mechanical tasks. By that he is being a mechanic, whether he believes it or not. It's both of their fault for missing torques, they are giving this bike to a another person, it has to be mechanically sound. So they (Chase and Brian) have to take ownership of these mistakes, correct them (which I'm sure they will) and move on. Don't defend poor workmanship, what I wrote was constructive and for you to say "well he doesn't claim to be a mechanic " is simple minded on your part. Have a good one JT, hold people, and yourself to a high standard, you'll be amazed at the results.

@reesespeanutbuttercups5548 4 года назад

He’s new so stfu Brian is there to help chase bc Brian has 30+ years of experience

@svensharpsword9837 4 года назад

Thread locker and torque to spec. elementary things to cover

@andrewbell3171 4 года назад

Should the title not read "My inability to tighten bolts properly is going to kill me"

@AndrewM83 4 года назад

Nice call with the chain looseness. You've got good friends Chase

@scoobyr1547 4 года назад

Bo and Luke, can't get more "Georgia" than that lol. Them Duke Boys

@ianthomas3653 4 года назад

Don't i remember Brian saying "If that seat gets wet it's ruined." ?

@lukemctyre3394 4 года назад

Ian Thomas not true. We will do a future Luimoto seat review soon

@jamiehofland7875 4 года назад

I noticed that chain slapping like crazy before he mentioned it! Made me nervous as hell

@tpower 4 года назад

I'll be back when the HD is processed lol

@pabloca88 4 года назад

+1.. still 480p :(

@vilhelmgustafsson2669 4 года назад

Still 480p

@RoadUser_Motovlog 4 года назад

Guess what? still 480p..

@Rui25552 4 года назад

Keep waiting

@jonfarah8529 4 года назад

Still 480

@chevyracing1080 4 года назад

I would never in my life ride a bike put together by these guys.. Jesus.

@haggus71 4 года назад

"Why are all these bolts getting loose?" Because that L-twin vibrates like a Hitachi magic wand! You need Lock-tite on Lock-tite for that thing.

@locomojo0485 4 года назад

Guess that's why it's a bitch bike.

@Baldybrew 4 года назад

When they were building the bike I remember in several videos Brian said that they would go back through and torque everything to spec and not to worry about it when they were putting everything together initially. Clearly that never happened or they were super sloppy about it.

@Allenamenwarenschonweg 4 года назад

So you forgot to torque ANOTHER safety relevant part properly because almost dying once just doesn't cut it anymore. I am already sorry for the guy who wins this bike.

@TheGorillaBiker 4 года назад

Incredible spot by Luke in fairness. Beast.

@NobleCrow949 4 года назад

Glad your safe but i hope everything gets sorted properly before you give that thing to someone else. The paint doesn't matter if you can't trust the bike enough to ride it.

@darrylm79 4 года назад

I’m halfway through and I love this split view. This is great! Your buddy saved your heiney! Buy him the first 3 rounds as payback. We need more of this BTS stuff.

@EupedUpp 4 года назад

Whoever wins this bike better upgrade their life insurance 😂😂😂

@RideOnTwo 4 года назад

Loved the shots of the crew from inside the car in the beginning. Glad the Sena equipment is working out. Would be cool if we could hear both sides of the conversation.

@Andy-2022 4 года назад

this should be called, 'how to drag out a rebuild' I feel sorry for those who pay every episode

@andyrowell7960 4 года назад

New shirt idea: torqued to spec?

@spaceman_az 4 года назад

I’m going to be straight forward... Every Ducati you have had on wrecked bike rebuild has had nothing but complications. 30 episodes is over doing it. If I may suggest for the next wrecked bike rebuild series you choose a bike that is not European. Unnecessarily complicated machines to work on. You have done nothing but big bikes for rebuilds. I think it would be cool to see a small bike in there like a ninja 300/400 or something similar. With all that said please take this as constructive criticism, I appreciate the hard work you do for your channel and providing entertainment.

@CoFRTheGamerXxX 4 года назад

Its easier to make money on 30 episodes than on 20. It also lets him afford the better parts

@jbholland1987 4 года назад

so wait? why is a ducati harder to work on than a kawasaki ? we talk about lose bolts here....

@spaceman_az 4 года назад

Lukasz Wereszko you’re probably right, but also to keep in kind he put $30k+ into that bike. If he rebuilt any other Japanese sport bike it would have cost a fraction and would have taken half the time. He could have pushed out 3 bikes and still make the same on them.

@spaceman_az 4 года назад

HandsomeHolland I didn’t say anything about lose bolts. Refer to the exhaust instal video. Note how many parts they had to remove from the bike to install an exhaust system. Another example; the rear shock install. They had to remove once again a lot of parts to do it. Yet another example; the carbon fiber exhaust heat shield. They had to once again remove a ton of parts just to find out it didn’t even fit correctly. The point I’m trying to make is most European bikes are unnecessarily complex to work on. An exhaust system install on a ninja would have taken a fraction of the time and money. Another point I want to make is it would be better to see more bikes given away than waiting an entire year and some change for one bike.

@RoadUser_Motovlog 4 года назад

@@spaceman_az it's not because they are european, it's because of how they are made. a V2 like the paningli will take some kind of space on the bike, and on a bike there's not much room so they have to put things where they can. I own a 2003 honda hornet 600, it's a simple bike, it's naked, it has an inline four with carburators, so nothing too fancy. I had to change the spark plugs and let me tell you that getting out the 2nd and 3rd sparks was a pain in the ass. I also had to remove a good amount of parts just to adjust my rear shock stiffness. Some bikes are easier to manufacture, some of them aren't. Also, it seems complicated but it really isn't, the bike is made of "sections" that you can easily take apart and put together.

@drew657 4 года назад

Just before Luke said "hey lets pull over," I thought "huh, that chain looks real f**cy... Shouldn't need tightened yet." Glad you made it there in one piece, sans pride.

@KAWIKATANA 4 года назад

Great idea on the paint also use lock tight on those important bolts

@alexandresousa199554 4 года назад

So who ever gets that bike should take it to a Ducati dealer to check everything... again...

@jacobbby93 4 года назад

How is this still only 480p. Hmmm. Waiting for higher res before I watch it lol

@ToxicDover 4 года назад

Man, between the first shakedown run and this one, you've got me wanting to go torque all the bolts on my own motorcycle haha. Glad it was caught before anything bad happened though man!

@BSGSV 4 года назад

This series is becoming a lesson in project management and how there needs to be some planning done regarding quality checks BEFORE anyone even thinks of riding. Shakedown runs are to verify the product works as designed and to catch minor issues NOT to catch failure due to negligence. Mistakes and oversights happen. But the SAME dangerous and obvious blunder should not be made twice. This is an example of how too much "creativity" with not enough "design" and "safety checks" leading to disaster. Fortunately Chase is still with us to make more videos.....this time. I am very disappointed in Brian, the expert. Kudos to Luke for good crisis management.

@buggin1951 4 года назад

"Negligence" is exactly the word to use here.

@PhalanxArms 4 года назад

Everyone is in here hating that the bolts came loose like they know what it's like to completely tear down a bike and rebuild it without making a mistake. I say good on ya Chase for sticking with it. There's no way in hell I'd be able to do it 🤘🏻

@Ksolidey 4 года назад

Honestly at this point, if i were you id either put medium strength thread locker on or safety wire the brake disc bolts and the rear sprocket nuts. Go all out to make sure them SOBs dont back out

@DmenDuroRider 4 года назад

I use red paint marker on my all my bolts, axle nuts, pinch bolts for my wheels, braking, drive, and suspension. If Dots are lined up I'm good to go makes pre ride inspection really easy. Just a small tick on the side of the bolt and right on the part.

@CurtisDavis89 4 года назад

I was litterly thinking that chain looks so loose and floppy, then He called it out!

@MeathedMoto 4 года назад

Not surprised this happens. Ducatis have a bit of shake to them so the torque spec and thread locker are your best friends. Ive had a few bolts run out on my Harley over time if i did not use old blue.

@duaneschaffer2549 4 года назад

Chase, I really enjoy your channel and content. As a fellow rider, so glad nothing went bad!!!

@rockysahling1220 2 года назад

This just shows me how different South Africa and America are. You just left a $40,000 Ducati standing, running, with the keys in it and ran probably 100 m away and it was still there! In South Africa we don’t even have to leave the keys in it, if we just leave it for five seconds it will be gone forever.

@marcanthonymarrero7544 4 года назад

Just a suggestion to the loose bolts situations. Maybe you could write down bolts that aren’t fully tightened on the whiteboard for a list so you don’t need to mark bolts

@keyzer.photos9125 4 года назад

'4K shots' watching 480.. downside of being in the notification squad

@mikey7985 4 года назад

When you know what the color is because you live like 25 min away (in Buford ga) from c2w and saw it getting wrapped. Don’t worry chase I’m not gonna say anything but it looks goooooood 👌🏼👌🏼👌🏼

@emmanuelluis9393 4 года назад

One little detail chase put some white light bolb in the front to match the led it’s a must do with every 959

@TheDiabeticBiker 4 года назад

Everyone has their own way of working on bikes so I'm not going to say what you guys are doing right or wrong. Personally, I prefer to tighten and torque as I go so I know nothing will get missed. I had one time when I lost the bolts out of my back brake. You learn from these and I'm pretty sure this wont happen again in the following seasons.

@realjarvis 4 года назад

It's a Rhodesian Ridgeback. Awesome dogs. Not too common.

@faint442008 4 года назад

I love these views and how it's almost like a behind the scenes deal.

@CoFRTheGamerXxX 4 года назад

The ONLY suggestion I have for the build is stop doing the "we'll get to it later" bits. That's how you miss stuff. Shout out at Shakey Hands McGee

@Project1Ark 4 года назад

It’s so nice to see I’m not the only one that struggles with getting decent content together...

@tieNagle 4 года назад

This is where YouToober Bike Builder gets its name..

@aarondatsun6957 4 года назад

Wow, Mr. Ceramic Coating can talk!

@danbailey1229 4 года назад

I saw the chain and said to myself self why is the chain flopping like that. Very glad you pulled over.

@paulwuk 4 года назад

The outro crew is huffed!

@Dumptheclutchevo 4 года назад

Just now realised the lads are Beau and Luke, as in Duke, of Hazzard County :D

@stijndesmet4811 4 года назад

i still don't understand why they buy the most expensive carbon fibre fairings, only to have them wrapped

@oldmanwhithers 4 года назад

My little monster 821 used to have things come loose. Lock thread and regular checks = no more problems

@cniky 4 года назад

480p max res, haha love it :3

@boostingaddict 4 года назад

Right before the chain was mentioned i was like the blue sticker is flappin like crazy on the swing arm then that damn chain is loose as crap

@nj_StTriple 4 года назад

I'd watch a series with Chase running in full riding gear, racing other youtubers. The camera car shots would be great! 🤣

@JCAB72493X 4 года назад

I feel like you shouldn’t reveal it until you get through a shakedown run and there is nothing wrong. I also thing you should take it to MMS to check it out. I get Bryan is working on it but it’s better to have a third party look at it. Btw blue locktite is your friend. Even if a bolt doesn’t call for it, it won’t hurt it and it’ll be a safeguard against vibrations (twins are notorious for vibration issues but should use for all bikes). Use it, no one wants to see you hurt yourself or hear about someone getting the bike getting hurt from something so preventable (...or from anything else). Ride safe

@taylorg2050 4 года назад

Shakey Hands McGee 🤣 to true. Gotta know it's all outta love tho

@YankiRides 4 года назад

I completely own my MJ Fox camera work!

@revwithkev 4 года назад

Almost been a full year and the bikes not done yet?

@nggdsb 4 года назад

Message of the day, boys and girls... locktite is your friend!

@-motoegyptian2615 4 года назад

Sorry but I would never wanna win a bike put together by you fellas. When it's a miracle to ride safe from one place to another...no thank you

@zmedia2853 4 года назад

I love how this format is

@845racingworks 4 года назад

Bike should be sold from the factory with a lifetime supply of locktite, torque wrench and torque specs on all bolts.

@hollywoodredneck8565 4 года назад

Look at that carbon in the back seat!!!

@buddybleeyes 4 года назад

That bike needs to be stripped down and rebuilt and fully re torqued with blue lock tight for non essential and red locktigh for essential. No way are you giving that bike away with TWO loose bolt faults that have happened. Imagine what would have happened to someone that won it... holy sh*t dude. I'd take that advice before it either kills you, or the person who wins the bike

@sputnikl727 4 года назад

How much are you paying Joaquin Phoenix to drive the car ?

@YankiRides 4 года назад

I wish I could double like this comment :D

@nickvolvo40 4 года назад

Dang Luke you talked him into buying a Ducati Too !!!!!Blue loctite

@RenoNuski 4 года назад

Glad yall had the Sena!!!

@michaeledwardlenzi 4 года назад

I liked this video. Real life stuff. Been there a few times myself! --Michael

@bikesandbeats4693 4 года назад

Are y'all really gonna let this bike go out the door with yellow headlights?

@criibz 4 года назад

Getting a trailer instead of risking your life wouldnt have been such a bad idea :)

@ibcrazy6147 4 года назад

Could you do an aprilia rsv4 or tuono for one of your first rides

@EmotionGamingRO 4 года назад

don't you guys use loctite on the bolts?

@watchjaredwork1487 4 года назад

Rule fucking one. IF YOU PUT A BOLT IN, TORQUE IT. PERIOD. My dad taught me that years ago. If you put a bolt in anywhere, you tighten it down. Don’t even think “Oh, I’ll go back to that later.” You won’t. I noticed you guys torqued all the brake rotors down last episode and just skipped the sprocket.

@BLUEY4X4 4 года назад

I've been watching that chain since 6:00 lol was like ewww that's a bouncy chain

@dannulik 4 года назад

WTF a day old video and still in 480p?

@hotrod7287 4 года назад

Awesome in-car perspective! Love it!

@mikewolf7147 4 года назад

holy shit, this video stressed me out. but very entertaining, keep it up.

@liamrender7643 4 года назад

If you guys want content, stop complaining about things going wrong. Most channels would cut their problems out and your kidding yourself if you think other channels dont have their share of problems on a build this big. Keep going chase, doing well man 👍

@andyyougoonie 4 года назад

Its cool watching this show because I used to live right there.

@sethglenn9022 4 года назад

Holy fuck that helmet looks amazing.

@wilsonpereira5629 4 года назад

480p boisssss

@AllTheRamenOnTheSky 4 года назад

Ah, the comment section... Where everyone is suddenly an expert and hindsight is always 20/20...

@evansolomon169 4 года назад

Or people who call a spade a spade.

@2wheelz420 4 года назад

I like this video set up Chase, don’t listen to the hater comments

@blatherama 4 года назад

480p club for the win.

@HellfireBeats 4 года назад

Damn, 480p. I'll be back later.

@ronnieshariff 4 года назад

Is it just me or the max quality of video is 480p ?

@GrimmXD 4 года назад

@@badgerman23 or someone uploaded it in the wrong quality because it doesn't take this long xD

@TheTrio3331 4 года назад

This is the first time I've seen "no views" under a video, lol

@grayv3 4 года назад

🤣 how the drama unfolds

@noobasdfjkl 4 года назад

Goddamn, if I watched this and then got this bike for free, I'd be very nervous about ever riding it. You have no idea what shit didn't get tightened properly.