This sanding disc will improve your woodworking and carpentry, period. 

Thank you very much for the positive feedback. I agree with the suggestion for a custom throat plate. Good idea Donald.

Just finished 27 new doors for my kitchen remodel...was able to sand the doors to perfection. After sanding all the doors on four sides, I still am using the original sanding disc.

@@donaldpyles2891 Donald, that is really great to hear. Cleaning up the edges of doors has always been a challenge. That is one of my favorite uses for this disc.

I just ordered mine and am anxiously awaiting delivery! I came back here today to see if anybody has posted any specs on the throat plate opening, but I guess I'm out of luck. I will post the specs for mine when finished.

I wish I could give you more information but honestly I just played with it until it worked. Now I have changed table saws and have to start again. Best of luck@@bullfrogpondshop3179

Thank you. I always appreciate you comments.

Thank you very much!

Ha! Well thought out. Get him some good tools, then a list of projects.

😜🤣👍

Thank you very much. That is great to hear. It really is a neat tool for sanding edges.

Timing is funny. I saw that video as well, I don't know if it will hurt or help the performance of this video. That idea wasn't original to John. Look up Final Cut Saw blades. I used to have one about 10 years ago. I used it on my chop saw for installing crown.

I saw Mike Farrington use this blade/sander before I John Heisz made that video. So since Johns video has over a million views hopefully this will be recommended by YT and help mike out 👌🏼

@@JoniAntonio John has a really big channel and puts out very good videos, when his do really well, its not a surprise to me. Time will tell if it helps me or not.

I also saw you using the edgetech awhile back as well and I thought it was very interesting. I even left a comment on John's video saying I had seen Mike using something similar on multiple videos and I believe I gave the Mike Farrington channel name for anybody that was interested. I just thought it was funny that I'd left that comment and then see you put up a video about you making your version of the Sanding blade. Good luck and keep up the videos I really enjoy your content.

@@2HME Thank you. That is always nice when someone takes the time to mention me.

Thank you very much. Yes, purchasing a disc will help support my channel.

Thank you. That is really great to hear.

That is some good news. Thank you John.

That is great to hear. Thank you very much.

Glad you enjoyed it

This was Shopsmith's idea, about 50 years ago. But good to see someone offering it for a table saw, and the double taper is great.

Thank you for the feedback. That is really great to hear.

That is a really good idea.

Yes, for the person who needs to sand the edges of lots of parts, this disc is invaluable.

Thats great to hear. They work great for sure.

Ha! That is great to hear. Thank you for sharing.

That is really neat to hear, thank you for sharing.

That is really great to hear. Thank you for the feed back.

Thank you very much. I have recently updated the website and I am now offering 150 and 180 grit paper.

Thanks Nick.

Nathan, Thank you very much, this is very kind of you. I agree, its a totally great technique for sanding edges.

Thank you very much. Great to hear.

For face frame work, this disc will save you a ton of time, and give better results.

Feather boards or other holding devices are always a good idea.

Thank you for the feedback. Great to hear you're happy thus far.

Thank you very much.

That is some really great feedback. Thank you very much.

Thank you. The taper on two sides allows for two different grits without having to change. As to the second saw I have a few customers who have setup a second saw and really like it.

Thank you. Taper vs flat is really no comparison.

Thank you.

Thats great. This will help for sure.

Thats great. It is a great help when building doors.

I found the same issue with my work. Especially the inside edges of doors and face frames.

What in the world were you building that needed 30 minutes of edge sanding?

Yup, works great for MDF.

Thank you. I think you'll find it a very useful tool. Let me know how it works out.

@@MikeFarrington I got a chance to use it for the first time today. Absolutely fantastic tool. I posted a photo on Instagram and tagged you in it. Hopefully it helps direct more people to this great tool.

@@Tomfrey That is really neat to hear. Thank you. I'll just on my Instagram and see what you are up to.

Thank you very much!

Thank you very much David.

That is part of my reasoning for the 2 degrees. That particular disc was what I recommended for a while. After a couple months I had a bunch of people email me stating the disc wasn't or wouldn't stay flat. I don't think its thick enough or machined well enough. Fortunately its cheap enough to where its not a huge loss.

Mike Farrington absolutely. Worth the money in my opinion as an experiment to find what features I would like to see. Yours nails it.

@@elfutbolphenom Thats good to hear and I think a good way to think about it.

Thank you very much. Hope you like it.

Thank you. I have seen the older craftsman discs. Very similar to mine. I understand not wanting to change discs, to each their own.

Thanks Michael.

Thank you very much, unfortunately, I'm sold out, but my next batch will be done in just a couple weeks. I will be shipping out shortly after that.

The reason it didn't take off is it needs a detailed presentation for people to fully get the what and why.

Thank you, they do work good. Thats cool you had one made.

Thank you very much. I hope you are right regarding the price. I know for myself, and how much use I get out of these things, its totally worth it. Hopefully the marketplace agrees.

Thank you. Let me know if you have any questions.

Thank you.

That is some really good news!

John, coming from you, thats about the best compliment I could receive. I was shooting this video when I saw your sanding disc video pop up.

@@MikeFarrington , John Heisz, I can't believe you are selling plans for this same product! 💖🌞🌵😷

That is totally cool to hear. Thank you very much.

Thank you. Its a helpful way to sand projects.

Thank you. When it comes to cleaning the edges of MDF, that is a time consuming job. This disc will help greatly.

@@MikeFarrington the disk showed up today. I couldn't get a full 2° negative tilt on my sawstop but I'll look into that tomorrow. Set up the fence on the left side of the blade and ran about 200lf of mdf through it and I gotta say I am very impressed with the result. This is going to save me a massive amount of time.

@@DarrenRashJr Try raising the blade height. That should create some clearance and allow for the full 2 degrees.

@@MikeFarrington I'll give that a shot, thanks

Thank you. The taper is key.

Thank you very much.

Thank you very much.

Yes, I agree. I have been using this style of disc for about 20 years now, its a great addition to a table saw.

@@MikeFarrington p p.o

Thank you. It can help that seam come together if your jointer isn't work great. Hope business is going well for you guys.

@@MikeFarrington going great! Would love to see your new place when I get out there again. Hope you and the family are well!

@@AcaciaCustomGuitars My door is always open, I'm 15 minutes from the airport. Let me know next time your in town. We're all doing well. Same to you and yours.

This thing will certainly help with mission cabinetry.

Thank you.

Thank you. The double sided idea was simply a product of wanting to change grits easily.

I used the same one as young guy starting out in the first cabinet shop I worked in.

did the same thing. makes great glue lines, almost can't see them.

Thanks Mark.

It will do some help with in limits.

Thank you, will do.

Thank you very much. Let me know how it works out.

Thank you. I'll go check them out.

Thank you very much, thats kind to say.

@@MikeFarrington I really mean it, if with success comes a lot of money, even better, money is liberty and time, when you have a lot, means you get to choose what you want to do and when you feel like it!

@@tonyioannoni4951 All I've ever wanted was to earn a decent living in the woodworking industry. If I can do that and have some more time with my wife and kids, and this product helps with that. I will consider this the biggest success of my career. Oh and as a side benefit, my videos could get more interesting, if I'm able to tackle projects of my own design and I have some more budget to put into them.

Thanks again!

Thank you. There have been a few to make this type of disc over the years. Craftsman was another way back in the day. None of those had the taper on both sides though.

Thank you. Thats great to hear.

Thank you. Everyone will have to make their own cost benefit analysis.

@@MikeFarrington Whatever the price point, it will be a great value to all who buy it. Value is remembered long after the price is forgotten. Best of luck with this product!

@@jerrystark3587 Thank you Jerry, I totally agree.

Goog point.

Let me know how it works out for you.

@@MikeFarrington I had previously thought about emailing you and getting a 1-inch Arbor version for my 5hp cabinet saw, but I think putting this DT sander on the little 3hp unisaw will work out better.

@@frontlinefinishcarpentry4193 I have 1" arbor discs if you need one. I think though, being 10" diameter, it will mesh better with the unisaw.

Thank you. I'll get it shipped as soon as possible.

Thank you.

Thank you very much. I ship it out as soon as I can.

Mike Farrington psyched! I’ll definitely give it a mention in a video.

@@CowDogCraftWorks Thank you sir, that's very kind of you.

Ha! Thank you.

Thank you. I'll look into rapid remover. Thanks for the tip.

That is a great idea. were you able to add the taper?

Add a home made bevel jig and make any taper you want

Thank you. It does help with glue ups.

Thank you.

Thanks Rob.

Thank you.

Thank you. I think if you end up getting one, you will like it.

Ha! Yup, the taper helps make it safer.

Thank you.

Thank you. Its a really neat tool.

Great, thank you.

Thank you.

Thank you.

Thank you. Yup, someone needed to do it.

Mike Farrington yikes. $150 though? That’s like 4x the price of the others. Are you getting these manufactured yourself?

@@ShopTherapy623 I consider 150 to be fair relative to quality. The cheaper ones seem to have problems. I have recommended the cheaper version for a while, and I ended up with a ton of emails saying it wobbled.

@@ShopTherapy623 I'm currently doing a batch of items that takes right at 30 minutes to sand the pieces for each unit. I figure this disc will cut that down to 5 minutes. So saving 50 minutes per hour seems pretty cool to me. On the low end, at $30/hour shop charge, that's 6 hours of "not" sanding to pay for the disc. That would be 12 units in my case. I planned on cranking out 32 of these a week, and the sanding is definitely the bottleneck. 32 units are estimated at 44 hours. With the time savings this disc could save, those same 32 units will take an estimated 36 hours. I could make another 6-8 units per week which translates into $400-500 extra profit per week. So to sum up: 1. I can save about 2 hours per day by using this disc to sand. 2. I can pay for this disc after saving 6 hours of sanding which is only 3 days. 3. I can make up to an additional 8 units per week which will translate into up to $500 in profit per week. The first week there would actually only be a $350 profit. But subsequential weeks would be $500. 4. And you're supporting a small business instead of a name brand.

Jason Peltier I get that, and no doubt these are probably better than the cheaper ones and will end up making you money if you’re a professional woodworker. As a hobbyist, they’re just a little out of my price range.

Thank you.

Yeah, that works well, but it's a little slower.

Thanks Anthony.

Thank you. Great to hear.

Thank you very much. Yes, some sort of custom throat plate will help greatly.

Thank you.

Ha! Thank you good sir. I'm guessing you could find one of those shirts pretty easy.

Thank you. I strongly feel the taper really makes this a better product.

@@MikeFarrington Well, my saw leans the wrong way. You gave two options, put the fence on the other side. Or, adjust the saw to be able to go 2 degrees past vertical. True, to be certain you have a 90 degree you need to use a square. But, my saw is pretty close to square and for most work -- at least most of my work -- if it is off by a small fraction of a degree it doesn't matter. So, I'm okay with just using the vertical stop most of the time. So, I don't really want to adjust the saw to go 2 degrees past vertical. Still thinking, deciding.

@@CaseAgainstFaith1 I understand the dilemma, let me know if you have any other questions. I'll do my best to help.