Your siphon set up gave me ideas at work awhile back we had a sedimant basin that needed to be worked on was flooding our site slowly , bosses were triing to pump it out with a 3 inch trash pump ,i gathered up some 4 inch pipe that we have laying everywhere sorta joined it together and used the 3 inch pump to start the siphon from the drain side , was a pain to get going but drained it out without a lick of fuel
Looks good Chris. You siphon setup is pretty slick for draining down a pond, but getting that cap off was making me tired just watching ya go in circles haha.
You showed using a siphon on a job a while back to drain a pond and I filed away that trick for the future. Amazing what you can do with a simple machine.
Hey Chris, maybe put a 1" ball valve on top your cap there so you can break the siphon without wearing yourself out. I don't suppose you're filling the cap with a 6" hose anyway are ya?
will meldrum Chris has a video somewhere in his playlist showing how he starts them. I think he caps the end, fills the dam side with water, pops the bottom cap, and the length of the dam side is longer than pond side so it creates enough suction to get pond water over the Apex. If that makes any sense.
As someone who does dredging I gotta say, that was painful to watch. Not your work, but only being able to do part of the pond. Stuff like that does my head in. Good job as always.
you really should put signs around the pit because I bet theres kids that co me down there and snow fences wont stop them. I have seen those pits swallow many deer. especially when its fresh some idiot could easily go over the fence and disappear
It is hard coming out because its on a massive vacuum and as your loosen the cap you are trying to create more vacuum which makes it even harder to turn.....................
YUCK.... That looks like the crap they used to fill in the upper section of the neighbors after the bad floods here. Stuff smelled worse than a septic tank... Times like that you need a long stick unit or an extendable stick...
You trying to unscrew in the suction is trying to hold it down. Grease those threads up good and don't screw that cap in all the way. Maybe if this is going to be something you do often maybe want to drill and tap a cap and put a half inch nipple and ball valve you can open and release the suction