Thread Mill - Complete process【DIY CNC MILL】

Подписаться 163

Просмотров 32 тыс.

50% 1

自作卓上CNCでネジ切り加工
Thread Milling　M6xP1.0mm
Materials：Steel (SS400)
1.Drill Tool
D:5mm
S:7639rpm
F:382mm/min
jp.misumi-ec.com/vona2/detail...
2.Chamfered Cutter
D:6mm
S:7958rpm
F:477mm/min
www.amazon.co.jp/gp/product/B...
3.Thread Mill
D:4.8mm
S:4356rpm
F:196mm/min
ja.aliexpress.com/item/100500...
【My CNC MILL Spec】
X:500mm Y:150mm Z150mm
(storke)
Spindle:1.5kw S Max:24000rpm
Motor:Nema34 F Max:5000mm
CNC:Mach4 ESS+MB3
#機械加工 #マシニング #Fabrication #DIY #CNC #Thread Milling

Опубликовано:

7 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@starcatify Год назад

It would be great if you could show how to create the Gcode for thread milling. Thanks!

@christopherbrown6152 9 месяцев назад

This is like watching old charlie chapman movies before actors talked

@davidschliebe246 Год назад

That hole has to have a bunch of chips in it.

@shirolee 2 месяца назад

Amazing work!

@xyzspec82 Год назад

Love your build 🤓

@mrt6399 Год назад

such an interesting machine

@user-hk9ny7qk9u 5 месяцев назад

Change the peck cycle so it doesn't fully retract it will save time and tooling wear!

@CeNuVezi 2 года назад

Wonderig why ur end mill retract soo much after it been detected by height sensor , u dont need that retraction , with 0.5 mm can do the job ok , u need only na offset to measure again with low feed that is only what is doing .

@thetruthyouneedtohear 2 года назад

If he didn't retract fully, the endmill will crash when moving back to the part.

@VinnySmiles01 Год назад

That seems extremely inefficient. A thread tap would’ve been done with both of those holes by the time that Threadmill got done with half that first hole.

@LeBearCNC Год назад

You are correct, but, in the same time, you are not thinking. A thread tap requires synchronization between spindle speed and Z feed. Not all CNC machines have that feature. AND, you need a thread tap for each thread diameter and pitch. On the contrary, a Threadmill does not require any synchronization,, and can be used for a range of diameter and pitches. It is slower, but it is a very budget-efficient solution.

@gangleweed Год назад

@@LeBearCNC Plus the fact that you get all of the way to the bottom, and you never have a broken tap in the hole.

@norton750cc 11 месяцев назад

The tap would break at that depth@@gangleweed

@theofficialczex1708 6 месяцев назад

You can buy threadmills with drill tips to drill and thread simultaneously, then run a chamfer on the edge with the same tool. With something like a combination drill/tap, you need to swap out for different diameters. You must factor in even more tool changes if you're using dedicated drills and taps.