The gun should be cleaned immediately after removing the cylinder with mounting foam from it. If you urgently need to remove the foam from the gun, and there is no balloon at hand, then you can use substitutes. These are solvent, acetone, White Spirit, solvent and other paint and varnish solvents.
Solvents are used not only for cleaning the gun, but also for removing mounting foam from metal surfaces and tiles. Proceed as quickly as when flushing the device.
In any case, do not allow the foam to solidify in the gun. It is extremely problematic to clean the gun from the frozen foam. To do this, you will have to disassemble the gun (if it is collapsible) and thoroughly rinse all its parts with a solidified mounting foam remover (not to be confused with a cleaner that is used to remove liquid mounting foam). Then assemble the gun. Theoretically, this can return the gun to working capacity, but in practice this happens extremely rarely. If the foam is frozen in the gun, most likely it will have to be thrown away.
Your subscription is the best help to the channel / igorvasilyevich
Detailed DISASSEMBLY of the gun for mounting foam. Cleaning the gun from DRIED foam. Adjustment!
• Подробная РАЗБОРКА пис...
#mountingthefoam #pistolforthefoam #washthepistol
15 окт 2019
