ThuleBox Key Stuck inside! I Drilled it out D.i.Y How to Install a New Cylinder in 

Sorry. If i came across with another broker Thule box im forsure make a video how to drill one out

You just use a small drill bit and go up in size slow and methodically. Need drill and drill bit that’s the first step

If you look at the face front of the old lock cylinder it show a code# and thats the kind a cylinder you need to order

Wiggle the key out back and forth. Worst case cut the key and drill it out

Sorry for not adding on the video but i use a electric drill with drill bits

What size drill bit?

@@rickdob I did this project yesterday. I used one drill bit the entire time--unsure on size offhand, but just start in the middle and work your way out. I had pliers handy to twist and pull pieces as I could. Wasn't too challenging.

Which size did you use?

@@Mrpngu I can check when I'm back in town, but not sure it really matters, so long as it's smaller than the cylinder. Slow and steady.

I used a drill bit

​@@jfGarage4kI did it too, but the crushed barrel although doesn't moving out.