Тёмный

Tiger Tool 10102 Heavy Duty Universal Joint Puller - Best Way To Disassemble Drivelines! 

Tiger Tool
Подписаться 7 тыс.
Просмотров 185 тыс.
50% 1

tigertool.com/...
The World's greatest and "original" U-Joint Puller! Engineered for use with up to a one-inch impact wrench, this tool provides the ultimate "brute strength" for disassembling drivelines.
Fits Spicer drivelines 1610, 1710, 1760, 1810, 1880, Meritor (Rockwell) 16N, 17N, 18N, 1710, Spicer SPL 140, 170, 250 "Life Series", and Meritor RPL 20, 25 "Permalube" Series. (Designed to work with U-Joint bearing cups from 1.5" to 2.2" and will fit virtually all Class 7 and 8 Trucks and Machinery)
• Eliminates dangerous jacking, hammering, and torching.
• Removes sealed u-joint cups in minutes.
• Does not damage the driveshaft, yokes, joints, or bearing cups.
• Tested and recommended by Dana Spicer Corp.
• One piece unit! No bolts, no cables, and no adapters.
Made in Canada - Tested and recommended by the Driveshaft Division of Dana Corp
#tigertool #Trucktools #truckmechanic #Trucktechnician #heavyequipment #heavydutymechanic #dieselmechanic #cooltools #handtools #Dana #Spicer

Опубликовано:

 

28 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 36   
@TigerTool
@TigerTool Год назад
Visit our website for more information: tigertool.com/products/commercial-u-joint-puller
@terrellscaife2411
@terrellscaife2411 3 года назад
This could be the greatest RU-vid video ever made
@SignatureStampsFan
@SignatureStampsFan 8 лет назад
I love this tool.
@jessetoptechallen1461
@jessetoptechallen1461 8 лет назад
good tool
@taylorculley2461
@taylorculley2461 7 лет назад
ive only had to use this tool once but when you need it,its worth every penny
@cliffordshaw3032
@cliffordshaw3032 4 года назад
I love this tool , how much it cost
@andrewwilson8317
@andrewwilson8317 7 лет назад
No grease points on that UJ?
@kurtdogg32
@kurtdogg32 6 лет назад
Andrew Wilson I seen one, not two. It's got some caked grease on the bearings too.
@ThrottleJerk
@ThrottleJerk 9 лет назад
You shouldn't be using an impact on a puller, it's very dangerous. If the joint is stuck, you accumulate energy in it qnd when it unstucks, the puller or joint could break and cause serious injury
@thebad300
@thebad300 8 лет назад
+Gabriel Thériault as long as you are not a dumbass and use the correct lube on the screw its not an issue
@LP2Check
@LP2Check 6 лет назад
When it unstucks....when it breaks free. Real fine work ya pus
@familytraditiontransportat7951
Pretty sure the maker of the tool knows how best to use it... But hey if you want to use a ratchet by all means go ahead Popeye.
@ThrottleJerk
@ThrottleJerk Год назад
@@familytraditiontransportat7951 damn i was dumb 7 years ago
@envisionCamusa
@envisionCamusa Год назад
@@ThrottleJerk I respect people that learn and admit to things.
@ScottDLR
@ScottDLR 3 года назад
I dont know about the tool itself but your video is sure better than "OEM's" poor attempt.
@lazarollanes5228
@lazarollanes5228 2 года назад
Thank you so much, this is video really helped me
@geoffclark9820
@geoffclark9820 7 лет назад
On full mechanical u-joints it's a must! In Canada the salt in the winter will seize it solid. He keeps the impact going like a moron, I run it up tight and smack the ear. That way you don't wreck the yoke or ear on the drive shaft. I have to say though, the tiger tool kingpin press tool is a bag of shit. I paid $1600 for mine at Gregg Distributors. Works fine if the kingpin is sicky but if it's seized into the axle it doesn't work at all which makes it absolutely useless. For $1600, it should work on everything!
@shortthrow50
@shortthrow50 6 лет назад
Geoff Clark nobody else that I know has such problems with their u joint and kingpin removal. In the United States we own grease guns
@mschelleman925
@mschelleman925 6 лет назад
Hey cockwad we have grease guns up here too. We also have licensed mechanics. something you guys should look into
@mandoky1647
@mandoky1647 3 месяца назад
Until the threads strip out on the tool.
@ryansmithberger3140
@ryansmithberger3140 11 лет назад
is there a smaller version for the auto industry
@thebad300
@thebad300 8 лет назад
yes but does not look the same look up ball joint/ujoint press www.amazon.com/OTC-7249-U-Joint-Anchor-Service/dp/B0002SRGXY
@mirocabraja5128
@mirocabraja5128 7 лет назад
Wddddddfdd
@TrentBigW
@TrentBigW Год назад
I drive a wrecker. We have to pull and hang the driveshafts, and we dont actually pull the u joint. We just seperate it from the yoke. Do do i just need to pull the two? Or do i still need to pull all four caps?
@TigerTool
@TigerTool Год назад
You can just remove the 2 caps on the one side.
@TrentBigW
@TrentBigW Год назад
Thanks so much
@TaintedMojo
@TaintedMojo 3 года назад
Is it actually designed to be used with an impact gun?
@TigerTool
@TigerTool 3 года назад
Yes
@conrad3932
@conrad3932 Год назад
💕
@dormindont1
@dormindont1 10 лет назад
Отличная приспособа!
@surendarasinghsardar9764
@surendarasinghsardar9764 2 года назад
I have to take this how much is it
@TigerTool
@TigerTool 2 года назад
tigertool.com/products/ujoint-puller?variant=33571416965258
@Mr1968gtx
@Mr1968gtx 11 лет назад
Tiger Tool part # 10105 or 10104
@shawclifford5332
@shawclifford5332 4 года назад
Where can i get that tool to buy
@BACONNWRAPPED
@BACONNWRAPPED 4 года назад
amazon
Далее
КАК БОМЖУ ЗАРАБОТАТЬ НА ТАЧКУ
1:36:32
titan tvman's plan (skibidi toilet 77)
01:00
Просмотров 5 млн
REMOVING U-JOINTS THE EASY WAY!
5:03
Просмотров 26 тыс.
How to change Universal Joints the EASY WAY!
9:36
Просмотров 671 тыс.
Tiger Tool, Heavy Duty U-Joint Removal
10:41
Просмотров 27 тыс.
Testing the Tiger Tools U Joint Puller
4:45
Просмотров 3,3 тыс.
GM Nylon Injection U-Joint Replacement
21:27
Просмотров 204 тыс.
КАК БОМЖУ ЗАРАБОТАТЬ НА ТАЧКУ
1:36:32