Timing of the Sailrite Ultrafeed Sewing Machine 

I didn't know it was the timing that was wrong. Thank you for this video and keep up the good work. ❤

I love that everything is mechanical on this machine. And that you have the videos to follow.

That was the best timing video yet!

This video saved me yesterday…worked hours oiling cleaning, checking needle height and finally timing. Learned so much about the lz1 and adjusted timing after a terrible needle break that left the machine unable to make a stitch. Thanks Sailrite! You just keep getting better and better! Now, off to the zipper tutorial😁

Great video! Easy to follow and superb camera work. After a needle strike on my LSZ-1, I had to dress up the hook and cap spring but the timing Is still right on after 6 years. All your videos are so well done that I often just watch them even when not needed. Thanks!

I'm watching before purchasing, I've listened to other people get their machines with issues. Now I know what to look for before starting my first stitch. Take pictures as you start and as you go, it will help in putting together.

You have explained it very well and clear. Thanks a lot.

Nice Rolex. Like a SailRite, a reliable workhorse.

Awesome set of videos. On the LSZ-1, it is not stated where the stitch width and needle position settings are during this timing procedure. My assumption is that it is not relevant, but I am having needle deflection only when the stitch width is set to maximum. Otherwise the stitches are perfect.

Hello, your sailrite sewing machines, apart from the design, and a few details of the mechanism resemble the singer 237 and singer 239 and it is to be believed if these are the new versions of the singer 237 for the LSZ-1 portable (blue) and the singer 239 for the LS-1 portable (red), these two models of singer machines were manufactured in the early 70s. And if you broadcast videos for adjusting the height of the needle bar and for the timing, it means that this machine has problems with the thicknesses, since the cause of these two misadjustments are the thicknesses

Seems like you could also do the same thing with the driver. But this looks easier to get to. I am not sure when you would adjust the driver vs adjusting the basket. Oh I see the gap between the collar and the basket is a factor here.

Video for timing adjustment on the Fabricator? Can't find it

Thank you for creating these type of educational videos. I am having skipped stitches and have checked everything on the owners manual to find the cause but still can't fix it. Wish me luck and see if doing this helps .

Hello, in LSZ, zigzag, does the shuttle move sideways following the needle? I have a machine with an oscillating shuttle but it is facing forward and the LSZ is projected to the side. Would you like to know what is the benefit of this system in LSZ? Thank you!

Thanks for the video, My LS-1 after sewing 30+ stiches, the thread will scramble and it becomes like a little ball. I already order a few replacement parts that goes on the bobbin area. Hopefully that will take care of the problem.

Tried to sew a jute rope bowl, but remembered after a disaster, it was shredding thread on my last project. Installed a new cap spring, raised the pressure fuut height as high as it would go. Touched alot ofvscrews, and finally did it. Alas, skipping stitches. Have been working on the timing forever. Thought the rotation of hook too far back, i guess not. Maybe the needle is too far away. So now am trying to move it. Two weeks of trial and error. Now im going to thing.check the bobbin holder

I have a question for you re: the rotation of the hook (and hook point). I understand about the rotational movement/adjustment of the whole basket, but how about the hook itself? Can the hook (and hook point) and the shaft be rotated clock/anti-clockwise? I notice there is at the end of the shaft a little grub screw. What is the function of that screw? Thanks.

What's the paint employed? It's awesome!

I just can't continue sewing, had my lsz since 6 months ago, and it has been a very difficult task , also I have to say is my first machine. But it never work good for more than 5-8 hours. Skiped stitches, upper thread breaking I had tried everything, from re tread, to needle bar height, to driver timing, to left to right timing, to put new needle, to wind the bobin properly, to check thread tension I even bought new cap spring and hook driver because they had a blur And honestly nothing seems to work I cant understand what Im doing wrong. The customer service also stoped responding my emails So as you can read Im very stucked and left alone which I dont think is nice I really need technical help

The shaft that controls the baskets left right timing has .004 end playI believe it is causing stich skipping, how do I fix this?

I can't get the screws out of the feed dogs. Is this for the blue Ultrafeed LSZ-1?

La fase ago crocchet si fà: 1 la regolazione del guscio crocchet ruotando in avanti/indietro + rotazione dex/ six agendo sulla vite del giunto blocco albero crocchet + albero guscio croccett (centratura ago su canale guscio crocchet) 2 centraggio asola crocchet allentando anello di blocco albero crocchet e spostare albero avanti/indietro. Una cosa non capisco, l'anticipo della punta del crocchet sull'asola dell'ago come si fà? (forse è fissa?) Io ho una Necchi BU Mira molto simili a quelle che presenti ho la fase quasi perfetta ma non cuce . The crochet needle phase is made: 1 the adjustment of the crochet shell by turning forward / backward + dex / six rotation by acting on the screw of the crochet shaft lock joint + crochet shell shaft (needle centering on the crochet shell channel) 2 crochet buttonhole centering by loosening the block crochet tree and move tree forward / backward. One thing I do not understand, the advance of the tip of the hook on the buttonhole of the needle how to do it? (maybe it's fixed?) I have a Necchi BU Mira very similar to the ones you have, I have the almost perfect phase but it doesn't sew, the only thing left for me to look at is the higher thread tension. What do you think of this problem? mail ma52pu@gmail.com Grazie

I need help I can’t find where to fix my timing on my singer fashion mate 6160.

Is this also a way to solve a reverse stitching problem that jams up?

I indian best your video

My needle bar appears to be set too high and the hook isn't picking up the bobbin thread. Do you have a guide for that adjustment?

31-k swing machine Deriver hooks not working please video bro

How much for a local sewing machine repair guy charge for this?

Steve Holt!

🤺💐

why not put an allen head screw in there ,,, make life a lot easier ,,,

👌 ok merci difficult language en français

hay salam satu jarum👈

Noice Watch

Please don't show this's again Thank you

Hi from Wales, UK! I found your superb videos on sewing machine adjustments etc and was able to efficiently sort out a problem on my machine (hook was hitting the needle). Undoubtedly, your videos are the very best I've seen; your commentaries and camera work are outstanding and I've learned so much from you. Thank You so much for sharing the information and for the effort you have made in producing the videos. Absolutely brilliant!