TINNY FITOUT | Tips and Tricks for the ULTIMATE FISHING TINNY 

3 day Creek mission coming soon mate. Closed Barra season so nearly went hungry 😂

Gday Marshall, thanks mate, glad you’re liking it!

Yeah I love the rod stowage on this little boat. The only thing better would be lockable rod lockers.

That’s so cool mate, stoked you found one!

Thanks Jill. Glad you got something out of it.

Thanks Kev

Thanks Wayne

Yeewww, thanks mate

Thanks Jon. Really appreciate that mate

Good to hear it was helpful Jay. Its so much fun customising these boats to suit your needs. See you next week mate, yeww

@@WildReaches that you will legend

Thanks Jazza

Thanks Roy. Back to regular episodes next week. Haha thanks mate

No worries Ferg! Thanks for the support mate. Hope you get some adventures out of them.

Thanks Roger, will do mate

Beautiful, I like that! 👌🏼

Haha good to hear. That’s what it’s all about. Sharing ideas and getting people pumped 🤙🏼

Thankyou, stoked you found us.

Haha thanks Ross! I’m sure you’d cringe at my wiring. 🤣, thanks mate, little girl! 👌🏼

Haha the only flatscreen is the new 12 inch Ray Marine Sounder. 👌🏼 thanks Teddy

Hey Darrel. Iv just drawn a square line across the top of the seat and down the other side and then measured down to the same distance each side of the seat. If that doesn't work because it hits the gunnels then just parallel off the gunnels and drill through on that Slight angle, Then fit the tube on an angle. The rod will bend up into there no worries.

It was only 12mm mate, no big spans so 12 is fine

No worries legend. I hope all’s good. Tough times atm but there are lots of positives to come too. Glad you’re enjoying the show!

👍🏼 thanks mate! They actually come with a bright orange strap. First thing everyone removes 😂🤷🏼‍♂️

Hey Jed, yeah think I went 12mm mate. Awesome, take your time with it and let me know if you come up with any cool ideas. Excited for you 🤙🏼

@@WildReaches Will do! Thankyou 👍

Started the build today. Mainly cutting ply to size, taking measurements etc. Installing a T off area up front for biodegradable golfballs and installing a berley/golfball canon on a swivel up front made of copper. (Should look cool- and provide some fun) When you framed the front seat area to make it higher with h3, how did you fix it down?

@@jedkates5857 Wow, sounds cool! what are these gold balls made of? All natural stuff? Good question mate, cant remember but the first thing that comes to mind is countersink some holes into the top edge of the H3 framing about 30mm deep. one at each end and one in the middle. sika flex along the base and then put some 75mm roofing screws down into the aluminium seat. Pre drill first obviously or use metal tip screws. hope this helps

Hey mate, stoked youre liking it all. Yeah I can try, give me a sec...www.ebay.com.au/itm/183231217881?_trkparms=aid%3D1110002%26algo%3DSPLICE.SOI%26ao%3D1%26asc%3D232984%26meid%3D8dd727ffdc3b4ac9ba374bc1b5ad63b8%26pid%3D101196%26rk%3D8%26rkt%3D12%26sd%3D184152875022%26itm%3D183231217881%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DPromotedSellersOtherItemsV2WithMLRv3&_trksid=p2047675.c101196.m2219&amdata=cksum%3A1832312178818dd727ffdc3b4ac9ba374bc1b5ad63b8%7Cenc%3AAQAGAAACAB9UlAdA7a9c%252Fzv1paiwp75VdCkbJtIerB9p2sSzHE7YWhcZND6774AGKZsyndipzrPfQSq0TIQugurgNkUEBR6wIOuFGVHxuHdXZ%252B1PuJlU1bNNqyJ5TsAIO40n9xSy%252FCdzH%252BUMabcbTKehYI6LIMuXpx4N8WtREcyZDgkVoTPUlS5oTnBcloHHg%252B7MKevds%252BvqY3ewY69oSevXcFTDLGvjNc%252BcF22Or8LRfHCVOlIvjXm2YtBaes2UP5IB2L1lvMBfnWm1OyBtyOF1Wg05%252FbAFqS9lk40A%252F3wkkPs7AnJbM14iri%252BItzMWc5krAjjuj%252BUuNW%252FaEaMTKS1j5343Wo5gI891BTpOOGCHICdvEYbhytw%252F2oFwQb%252FEhdkcaYNzxmbkgB7OsYP8R1vMMRtPIZrySE23BaZRAZouta4KedTFyNOgr6VLeXgoh6BjZlbSDDLvb7b8b2lqT0%252BXx876ECcJ0fd69JX9iYky%252BCg73S0%252FgW5cUVJbuVutD6j4Q527GH6QbMVCjAHztvOoq3X1HrgF2B2vM%252BSS5V9RMzkrxDNXEv2D2Z8ZjxCMaztgMVNtgRgJN%252FGMTVf%252Fx7%252Be%252B1S7OGg%252BCLsnLPLmZvHtvjnRjHeME3gb0tqd52Tij5gJXBCE9NP5XzuBbi01iRGXHO%252Br%252BAu9g%252Fds%252BK8MesdJuIyi0wX0%7Campid%3APL_CLK%7Cclp%3A2047675

wow, thats a big link but will take you to a Ebay item. Think I just got them from BCF though. The Wenlock Trip was a life changer mate. Crazy being so submersed it nature

Go for it mate. Have fun with it

Awesome mate, it’s a pretty practical setup, don’t think I’d actually change much. I used 12mm ply and a mix of ally angle and timber frame. The only line framing is to frame up above that fro t seat. The rest is ally with sika and pop rivets 👌🏼 thanks mate will do 🤙🏼

@@WildReaches do you have any detailed videos on the gear you use, rods, type of line lures what you use what for. Or would you make a video like that at all ?

@@Slim.Swainy I dont think we do mate, but a few people have asked for it so Ill do one in this upcoming film trip. Ill just add it into an episode.

@@WildReaches you legend. Looking forward to it.

Yeah couldn’t get it ready for this morning with internet issues 🙄

@@WildReaches hey budd will catch up with u soon as have a few suggestions/pics for ur boat trailer project that work a treat on my trailer 👌

Just carper with contact adhesive mate. I’m about to start and film a new tinny build so keep an eye out for that.

not sure mate, never checked it with the GPS.

its on a 20mm aluminium tube frame that we bent up specifically. I think we're running approx 80 watt but id have to check that.

No I haven’t. A company called Cutting Edge Canvas (Mike) made it for me. Just sail track across the bow and then those elastics with lugs down the gunnels and stern

@@WildReaches cheers, looks like it keeps a lot of the dust out

It does a real good job mate

You’ll find out in the next couple episodes. Not great. Yep I think it’s time for the upgrade 😉

agm, saw a comment on your other vid

Switching to lithium in a build im about to start for season 6

not sure mate, I dont think so... I shouldve added it to this one. bugger

Mostly aluminium angle

We carry a portable 12v bilge with alligator clips

No, bloody close though

Check out Joan wulff

Wow, that’s unreal, must’ve been a fun day!

Hey Michael, aluminium angle mate. I ran aluminium angle 12mm lower than the seat height around the seat, gunnels and transom. Sika flex and pop rivets to fit it on. 👌🏼

@@WildReaches thanks mate ! Appreciate it

Thanks Brent. I agree mate, we’ll come with a solution for this next season as we’re constantly wiping them but it’s obviously not enough. 👌🏼

Yeah mate, think their 3.79

Haha if only I had the time. Thanks mate

Sounds like you know a thing or 2 about fly fishing Rusty. Thanks mate, Ill check him out. Here on RU-vid?