No video :(

Tiny House Wood Stove Pipe Install Video

Подписаться 4,7 тыс.

Просмотров 451 тыс.

50% 1

For more information on small wood stove installation and 3' and 4" solid fuel installation parts visit: www.tinywoodst...
In this video Nick uses our 4" installation kit to installs his small wood stove in his tiny house. Nick used our kit + modified a pellet roof support box which turned out to be a beautiful installation.
Getting the right parts for your small wood stove installation is crucial for a safe operation. Currently in North America you can't source small diameter stove and chimney pipe for solid fuel.
While you may be able to find 4" pipe it's for pellet stoves or direct-vent appliances and is not rated for the high temps of solid fuel wood burning stoves. Plus many of these pipes use galvanized which off-gasses with the high heat from the stove.
With our own struggles to source the right small diameter parts for our personal stove we've worked long and hard to source stove and chimney pipe in 3" and 4" that's rated for solid fuel.

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 110

@RedefineLiving 6 лет назад

Thank you! This video is exactly what I was looking for. If you spray-paint the rubber gasket, the paint will act like a sun block and help the gasket hold up longer. It's a roofer tip from a roofer that has helped me a few times . Thanks again!

@annekennedy883 5 лет назад

Thanks for the spray paint tip!

@bobbywatts7472 3 года назад

you did an awesome job for a first-timer not insulting you inspired me nice house

@0714will 7 лет назад

Nailed it! Do you do info-vids? No way you're an installer! Way too professional. Thanks!

@OverlandTrailer 6 лет назад

A textbook install. The High Temp Silicone boot looks great too. A bombproof application.

@rekostarr7149 3 года назад

you need 2 inches between chimney and roof hole on each side.

@Mik3Hess 3 года назад

Doing it first time yet it is the best and most detailed video I could find on here. Thank You! :)

@tinywoodstove 3 года назад

You're very welcome!

@amandadoggett1889 5 лет назад

What a professional installation and video. Thank you for taking the time to make the video. It was very very helpful. Xx

@huettenleben94 2 года назад

Very cozy and nice stove!

@bradstoesz4951 6 лет назад

nice job. As a company owner I would hire you. Very well done. Forget 'Keep Peace' comment. You'll do fine wherever you are

@mandolinmountain 7 лет назад

Thank you for uploading!

@gulithebig1 4 года назад

great job, congratulation from Argentina.

@tinywoodstove 4 года назад

Thank you! Cheers!

@crazy1901 5 лет назад

Great job but a storm collar would be advisable. Thats what it's called here in the UK

@gustavoriquelme10 4 года назад

Thanks for sharing, good job.

@jmb5742 Год назад

Good job

@acsiata Год назад

Why would you drill your double wall pipe instead of using a connecting piece around it?

@tomh4685 5 лет назад

I feel like this is something I would want to do during the fabrication of the building... The box part at least. I'm currently in the planning phase of building a 200sq ft guest cabin and im trying to find ideas on how to streamline the process so im always moving forward.

@typolive8663 Год назад

Thank you!!

@xGREEDYGUTSX 7 лет назад

Don't know what the regs are in the US but over here in the UK any uninsulated flue pipe needs to be 3x the diameter of the pipe away from combustible materials. The twinwall flue should protrude down through the ceiling at least 450mm (17.7"). Just saying! Keep an eye on that timber!

@jimbo91262 7 лет назад

cool home. stove setup with brick is SWEET. yeah, i thought the minimum clearance from combustibles was 2" on triple insulated pipe where i live (Midwest)

@pacificnorthwestinspection8121 6 лет назад

Really? Did the video discuss temperate rating on the flashing boot? Is it a 250 or a 450 rated boot? Just because they have a nice video doesn't help the novice put in a stove exhaust. Hire a Pro or watch a video that covers all code requirements, then have it professional inspected prior to use. Tiny homes burn down too.

@michaelcyr8215 5 лет назад

2" to combustibles for duravent HT double wall insulated pipe for wood stove.

@akaredcrossbow 4 года назад

How long are the screws that you used to screw into the pipe with that bracket at the roof? That pipe isn’t made to screw into! The screws could potentially get so hot and then heat up the bracket you used and that could catch the roof plywood under the metal roof on fire!

@briansmythe3219 2 года назад

thanks for the info nice

@MeadowsJames 7 лет назад

Thanks for sharing!

@desertsolidude Год назад

Great video these are super cool. I built an A-Frame cabin and couldn’t find any info on if I can go out one of flat side walls or do I have to go through the super steep roof? Maybe that’s a silly question 🤷‍♂️

@tinywoodstove Год назад

@desertsolidude, you can do either! The vertical side walls are a much easier configuration that can reduce the height of the exterior flue but the steep roof is an option with an "extreme angle" silicone boot. Feel free to send us an email at support@tinywoodstove.com if you'd like to discuss the flue design further.

@tjj5337 5 лет назад

Looks great

@heatseekerbus 5 лет назад

I received my chimney kit and there are no instructions included, not even a picture diagram for where parts go. So I'm here to learn how to install my chimney kit.

@tinyhousegreece4923 6 лет назад

Good job I would of cut out the OSB and used some fireguard around the edges only as a over kill. Thanks for the video

@chelosocal8704 3 года назад

I m wondering if the material of the sealing wrap iis ok to withstand the heat

@tinywoodstove 3 года назад

Do you mean the Silicone Pipe Boot Shingle Roof Flashing? It is! It is made of Hightemp Silicone: www.tinywoodstove.com/product/3-8-hightemp-silicone-pipe-boot-shingle-roof-flashing/

@xivious 5 лет назад

This tiny house looks huge inside ! Nice ! What kind of trailer is that on ? Can you pull it with a 250 ?

@alegarciadelrio 4 года назад

Good job!!

@tinywoodstove 4 года назад

Thanks!

@SalmanSalman-iy3os 5 лет назад

Good job there👍. And I like the set up. I myself live in a tiny place also. And I would like to know where you got all the parts from Including the Stove. If possible .thank you.

@rc6147 2 года назад

Remove the slug from the hole saw so it could go all the way

@toycreando 7 лет назад

Gracias por tu vídeo me es muy útil !

@aftabahmedmanhas9358 2 года назад

Price pl

@tinywoodstove 2 года назад

You can find our shop here :) www.tinywoodstove.com/product-category/stoves/

@hubristicmystic 7 лет назад

Thanks :-) Neat video

@metelskiy 2 года назад

Would you share where did you purchase chimney kit?

@alfaman4113 4 года назад

Won’t the rubber melt from the heat from the flue?

@tinywoodstove 3 года назад

Good question. The answer is no. The insulated pipe knocks the flue temps down and the boot is made of a high temperature silicone.

@tomatoplot 6 лет назад

Great video! I am currently installing a similar chimney on a sauna I am building. How has that rubber gasket been holding up for you? I may consider one if you like it.

@Rick-zw7zv 6 лет назад

I'd be surprised if the sun's UV doesn't pulverize it.

@nickknecht772 2 года назад

I'm the owner of the Tiny House this is installed on and I'm happy to report that the gasket has held up beautifully 6 years later! The first winter I dealt with some odd leakage that seemed to be coming from the seam of the metal roof ABOVE the pipe... I think it had something to do my installation being right on the seam in between two sheets of roofing, but a little silicone caulk fixed that.

@ricohhobrasil9591 7 лет назад

Congratulations !! :D

@rideonkc 6 лет назад

Who makes this stove? Where can I buy one?

@rondill8429 6 лет назад

I use insulated pipe from top to stove... makes more sense to me...Better safe than Sorry!!

@6string327 6 лет назад

better safe *then sorry.

@themistermax 6 лет назад

Nothing like an internet grammar nazi who doesn't even know grammar. It's "than".

@Fabes002 5 лет назад

Single wall will give you more free heat than double wall. No need for double wall until you get near combustibles and for exterior to avoid moisture and sweating through the pipe.

@gaoeric1143 4 года назад

tiny house, tiny stove

@campinbob942 7 лет назад

I am also soon installing my stove in my tiny house and have yet decided on the chimney. I really like the pellet wood stove insulated pipe but all I can find is pipe rated for 600 degrees which is good for pellet stoves but regular wood stoves such as yours needs to have pipe rated for over 1000 degrees. I see you used single wall pipe inside and the insulated pellet stove pipe outside. Does this application satisfy the needed temp ratings? thank you for your input

@tinywoodstove 7 лет назад

This pipe is not pellet pipe. We do not recommend pellet! We've made our own flue line of double wall insulated pipe specifically for solid fuel.

@campinbob942 7 лет назад

Thank you for the advice

@JonBeeTheProducer 6 лет назад

Pellet stoves are vented very differently than wood stoves. Depending on the stove (Btu's, efficiency, ect.) A lot take a 4 inch pipe. Please read the instruction manual or hire an nfi certified tech to install. Fire is nothing to be messed with

@jameswestii454 4 года назад

Use Metalbestos or security pipe. Selkirk is a good brand.

@adkinsmikkelsen4980 6 лет назад

Good to see that the woodprix has new instructions to save my money and energy to build it.

@stevenmitchell4741 6 лет назад

What did you use for the wood on your ceiling. Looks good

@RNotenboom 3 года назад

It is beech wood

@nickknecht772 2 года назад

Its tongue and groove pine actually.

@felipemunoz3350 2 года назад

what is the name of the rubber that appears in the 06:25? where can I buy it?

@tinywoodstove 2 года назад

That is the silicone boot. This particular one is for metal roofs but we also have one that will work with composite shingles. You can find our silicone boots in the parts section of our website at TinyWoodStove.com. We have them in sizes that range from 6-11", 4-7", and 3-8".

@ebonyschannel3279 5 лет назад

If you don’t want install it yourself can you hire someone?

@jaywatts333 3 года назад

you need to remove that box and trim all that wood off away from that pipe. speaking from experiance.

@TheEnigmaticmuse 3 года назад

Would an attic insulation shield not work there? It keeps insulation away from the chimney and maintains the 2 inch required clearance from combustibles.

@geekay2747 5 лет назад

Sooooooo... how long before that lovely rubber gasket melts from the 500+ degree exhaust?

@rondill8429 6 лет назад

What, No Witch Hat and Storm Collar??

@6string327 6 лет назад

ikr. It's basic and water will find it's way through eventually

@HVG67 7 лет назад

Man, I just hope that hole is not the beginning of a leak..

@nofreeloading7333 6 лет назад

using dectite is not code for woodburner and going through roof and ceiling needs triple wall chimney pipe not double wall stove pipe

@paigeparsons5174 2 года назад

Double walled insulated stainless is code most places I've seen.

@nofreeloading7333 2 года назад

@@paigeparsons5174 As a retired hardware store guy in Montana who specialized in wood burning stoves, .I can tell you what I was told by DuraVent and what I would tell my customers ll say, double wall is fine for gas appliances penetrating a combustible wall or roof. but for wood burners you need triple wall. Code?? Any local code is superseded my the OEM specifications. I am not the expert I would suggest one talked with Duravent for expert advisement and not utube

@TrueBlueYukoner 5 лет назад

Did you keep proper clearances to combustible materials??

@michaelcyr8215 5 лет назад

my question too. The roof penetration looked pretty tight. Duravent HT requires 2" clearance to combustibles.

@keltiqrennee 7 лет назад

how much does the chimney need to stick up from the roof???

@tinywoodstove 7 лет назад

Residential code say 3' from penetration point and a minimum of 2' above anything within 10'. Hope this helps!

@keltiqrennee 7 лет назад

tinywoodstove.com thank you so much...this information sure does help!!! ;^)-÷-

@jacksimper5725 5 лет назад

Safety guide in most countries is the height of the stack is above the roof apex, it is also wise to support the stack by wire or better still tie rod to ensure no movement in wind.

@jacksimper5725 5 лет назад

tinywoodstove.com Your answer only applies to American States ,this video and others are shown worldwide where different regulations may apply.

@redsresearch 7 месяцев назад

didnt show how u air sealed it

@tinywoodstove 7 месяцев назад

Wood stove flues aren't air-sealed because they operate on a natural draft as opposed to forced-air systems like propane and pellet stoves. Customers seal the penetration with a silicone boot to keep the weather out but there is no need to 'air-seal' a wood stove or woodstove flue system.

@redsresearch 7 месяцев назад

@@tinywoodstove what do you mean? I'm talking about air sealing it in the attic.

@user-qz4hn3tz4m 6 лет назад

واو كم هو جميل

@TheEvie56 6 лет назад

Where do you buy the box?

@rondill8429 6 лет назад

Make your own Box!!

@johnnylawrence 5 лет назад

It's been about 2 years now. Where's the follow up video of how bad it leaked under that "ceiling gasket" you screwed in 30 times to the metal roof.

@nickknecht772 2 года назад

This is actually my personal Tiny House, and I'm happy to report that it's held up great! I did have to add some more silicon caulk the next winter, but since then it's been perfect.

@RossKempOnYourMum01 7 лет назад

Hmmmm @ the gasket

@HVG67 7 лет назад

Yeah, that gasket is flimsy as heck..

@bannerelkglassart433 5 лет назад

Yeah that's what would worry me. But I'm doing this in a 84 sq foot mirco-tiny house( there will be 60 more SQ foot later). Doing it without having to worry about code but still I need it done right and looking well. . this is one of the best videos I've seen but still think the gasket should be more weather proof.

@nickknecht772 2 года назад

This is actually my personal tiny house, and I'm happy to report 6 years later that it's holding up like a champ!

@TheEvie56 6 лет назад

@rondill8429 6 лет назад

Not a good idea to drill into insulated pipe for those brackets you put on at roof level !!

@michaeljordan5864 6 лет назад

What is negative about Ron Dill's comment? He's contributing to the discussion and perhaps the next person won't make the same mistake.

@grandmasoffgridliving 6 лет назад

I actually agree. needed to be more level for stability over time. If I was a client, I would have had a fit over drilling through that tube. its double walled for a reason