Tips and Tricks for Crafters: I Wish I Would Have Known

Подписаться 169 тыс.

Просмотров 7 тыс.

50% 1

Tips and Tricks for Crafters: I Wish I Would Have Known
➡️Siser Document: www.siserna.co...
➡️Houston Astros Design: • Let's Use Siser Brick ...
Hello everyone!
In this little chat, I am sharing 10 tips and tricks that I have learned on my crafting journey that I wish I would have known when I first started crafting. Even though, I could make this video hours and hours long, I am sharing my first list of 10 tips and tricks with hopes that you will find them helpful on your journey.
Here is the link to grab my sticker sheet from Cricut Design Space:
➡️design.cricut....
I love to purchase all of my vinyl from Atlanta Vinyl and the best thing about ordering from them is that they are fast, friendly, and helpful.
Here is my affiliate link to place your order:
➡️atlantavinylst...
My discount code is Delonda
Make sure to leave a comment to let me know which tip or trick you found to be the most helpful.
⭐⭐The links above are affiliate links and I will earn a small commission from eligible purchases, at no additional cost to you.⭐⭐
🛒My Etsy Shop: www.etsy.com/s...
If you have not subscribed to Creative Fabrica for their Yearly All-Access Subscription, you can do that here: ✅craftingwithde...
My Equipment:
☑️Adjustable Table: amzn.to/3NOSGGb
☑️Craft Desk: amzn.to/48dKUxX
☑️Heat Press Cart: amzn.to/4aEz1m7
☑️16 x 20 Walapress: craftingwithde...
☑️Heat Press Top Cover: craftingwithde...
☑️Heat Press Lower Platen Cover: craftingwithde...
☑️Siser Romeo: craftingwithde...
Join me on my other Social Media Platforms:
Come and get social with me:
👉Links to all of my socials: linktr.ee/craf...
👉My Website - craftingwithde...
👉My Etsy shop - www.etsy.com/s...
👉Instagram - / cricutingwithdelonda
👉Facebook - / 272801197679910
👉Pinterest - pin.it/2ROzvx3
👉Creative Fabrica - craftingwithde...
👉TikTok - / cricutingwithdelo
Join My Email List: craftingwithde...
Thanks for joining me today and thanks for watching!
Bye
#tipsandtricksforcrafters #craftingwithdelonda #craftingbeginners

Опубликовано:

17 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 163

@CraftingwithDelonda 2 месяца назад

Here are two important links from this video: Siser Document: www.siserna.com/files/heat-transfer-vinyl-instructions.pdf Cricut Cutie Mat Covers: design.cricut.com/landing/project-detail/60d94a2640ff011294803cba

@elizabethvallely4044 2 дня назад

Thank you Delonda! Great video and very helpful, like the tip labeling your vinyl up to now I just keep it in the package it comes with! Tahnk you for everything as always your a great teacher! Hugs Liz 😊💕

@elfredalove9455 2 месяца назад

Thanks, Delonda. It is so wonderful to be able to go back through your library of videos to find what I need and more. Thank you 💜

@CraftingwithDelonda 2 месяца назад

Thank you! I appreciate that.

@MakingwithMarilyn 2 месяца назад

A lot of great tips! Going over all of the acronyms was something no doubt a LOT of people benefited from. Also, using one brand of vinyl on a project is a great one.

@CraftingwithDelonda 2 месяца назад

Thank you so much ❤️

@mhjudge67 2 месяца назад

My favorite tips; Using the cutties on the mat cover sheets, and labeling my vinyl. I have some I have no idea what kind of vinyl it is. Thank you for your tips and tricks.

@CraftingwithDelonda 2 месяца назад

You're very welcome!

@robins.williams8104 2 месяца назад

Hi Delonda, all of the tips are great, especially for a beginner. The tip that stuck out most to me was labeling your vinyl. Thank you so much for sharing.

@CraftingwithDelonda 2 месяца назад

You are so welcome!

@adelingreen4695 2 месяца назад

Thank you for all of your tips and especially the one for the Cricut mat cover, after all these years using the mat I never knew there was a wrong and right way to put it on, I was baffled as to why they wouldn’t stay on. Amazing tips for any stage in crafting. Thank you for the Cuties file. God Bless You for sharing your gifts and Talents with us.

@CraftingwithDelonda 2 месяца назад

Awe, thank you! I appreciate that.

@Ladybear06 2 месяца назад

AWWW My teacher definitely needed her red tape! Thank you for being who you are!

@rvatxn 2 месяца назад

My favorite tip was how to differentiate the different vinyl types. I just got my Siser Romeo today. I’m excited to get started. I have two silhouettes but I’ve decided to learn illustrator - I think that’s the most versatile option.

@CraftingwithDelonda 2 месяца назад

Congratulations on your Romeo!!! I'm so excited for you! I'm glad you found it helpful. I hope you're joining me tomorrow for Romeo Wednesday!

@stellabyrd6014 2 месяца назад

Love watching you. Stay blessed😊

@lindabradford9591 2 месяца назад

Hi Delonda. I messed up by not labeling my vinyl, so now I take the label and insert it into the middle of the roll. On the mat cover, I write ON with a marker to show the right or wrong side, but I like your little cuties better, so I'm going to print those, lol. Congrats on 161,000 subscribers. Thanks for all the video's also!

@CraftingwithDelonda 2 месяца назад

Thank you so much ❤️

@romonamorrow7296 2 месяца назад

Thank you Delonda. Tip number six definitely helped me. I have rolls of vinyl that I couldn’t figure out if they are htv or permanent. Now I know how to tell. Thank you again. All the tips are helpful.

@CraftingwithDelonda 2 месяца назад

Awesome! I really appreciate that.

@janleaks2443 2 месяца назад

I like the tip and trick, before I came across your RU-vid and trying to learn silhouette man I mess up lot of material, right now I have vinyl with no name and don’t know who it’s from so all the tips and tricks helping me. Thanks Delonda you help me out a lot not a pro thanks again

@CraftingwithDelonda 2 месяца назад

I appreciate that so much ❤

@Mrsangierice 2 месяца назад

Happy day for you too

@daniita4570 2 месяца назад

Great Tips Delonda! 🙌

@aknewman 2 месяца назад

Thank you for this information. What I found most helpful was labeling my vinyl and what settings and methods to use when I’m uncertain as to the brand of vinyl I am using.

@CraftingwithDelonda 2 месяца назад

I'm so glad you found it helpful ☺️

@tanyawhite8611 2 месяца назад

Thank you for this video. Cleared some things up for me. I sooo appreciate your videos…and your humor. ❤😊

@CraftingwithDelonda 2 месяца назад

Thank you so much ❤️

@shebascreations1195 2 месяца назад

Thanks for sharing those tips. Honestly, they will help newcomers. When I began with Cricuit, I made many mistakes and bought things I did not need, because I did not know. Tip #10, was my favorite because I need to wean off Cricuit design space. My use does not justify the cost😊. Oh, this is Louise Harris...My business name is Sheba's Creations.

@CraftingwithDelonda 2 месяца назад

Awesome! Listen here, I love that you have a business name. That is fantastic. Thanks for watching.

@staceycollins9232 2 месяца назад

Everything is always helpful

@CraftingwithDelonda 2 месяца назад

Thank you so much!

@esteladelacruz8825 2 месяца назад

Thank you again for all the tips.

@gwenmack3544 2 месяца назад

My favorites: 😊 labeling my vinyl and designing outside Cricut( 😢I’m trying to learn to do)🥹🥹

@darleneberry4753 2 месяца назад

EXCELLENT TIPS DELONDA!

@CraftingwithDelonda 2 месяца назад

Thank you ❤

@lorettastreet1192 2 месяца назад

Thank you Delonda! I enjoyed your support and encouragement. I can’t draw a circle 😂😂but I feel motivated by your encouragement and enthusiasm.

@CraftingwithDelonda 2 месяца назад

Thank you ❤ You would be surprised at what you can do.

@TheShugluv7777 2 месяца назад

I liked all of the tips. They were very helpful. ❤❤❤

@dianewilson403 2 месяца назад

Delonda, thanks for sharing the tips and tricks for crafters. Excellent video and I have included the highlights in my new journal. Once again, thanks for all you do to make sure we are on point. 😀😀

@CraftingwithDelonda 2 месяца назад

You are so welcome!

@victoriabostick7684 2 месяца назад

This video should be watched by everybody. I will be rewatching and will be writing in my journal. Kudos💜

@CraftingwithDelonda 2 месяца назад

Thanks a ton for watching and sharing your thoughts! Your support means everything!

@SheritaSingleton-d6i 2 месяца назад

Hello Everyone, Looking forward to learning some tips and tricks.....

@CraftingwithDelonda 2 месяца назад

Thank you very much!

@donzellcooper 2 месяца назад

Hey delonda. Thanks for sharing your tips and tricks about you wish you would’ve known.

@CraftingwithDelonda 2 месяца назад

You are so welcome!

@ladykonline1 2 месяца назад

As always, great tips with your sparkling attitude!! My favorite tip is the five household items - I buy extra for crafting and keep in the craft room (so I'm not sharing with the rest of the household..lol). I love the canva program and it was a learning curve but there are so many helpful you tubes and I take it step by step - the projects I have designed and created have my personality and I LOVE it

@CraftingwithDelonda 2 месяца назад

Awe, thank you so much ❤️

@beverlyalexander7076 2 месяца назад

All the tips are good but my eye opener was labeling the vinyl. I have so much vinyl and always figuring out the type and temp setting. My 2nd favorite is using same type of vinyl when laying. Thanks for the tips.

@CraftingwithDelonda 2 месяца назад

Thanks for sharing!

@annetteprice6971 2 месяца назад

Thanks for sharing very helpful tips.

@CraftingwithDelonda 2 месяца назад

Glad it was helpful!

@mlistander 2 месяца назад

Delonda you always make my day!❤

@CraftingwithDelonda 2 месяца назад

You just made my day too ❤

@carengilbert9044 2 месяца назад

Thanks Delonda all of the tips were very helpful! Now I can tell my htv from my adhesive vinyl easier! Have a great night!

@CraftingwithDelonda 2 месяца назад

Glad it was helpful!

@sylviahenderson6489 2 месяца назад

Hello, Happy Crafters. Greetings to Delonda, family and Milo!

@CraftingwithDelonda 2 месяца назад

Hi there!

@varonicaholland5418 2 месяца назад

Hello DeLonda, thank you. I found all the tips to be helpful.

@CraftingwithDelonda 2 месяца назад

You are so welcome!

@deidraray9953 2 месяца назад

Thank you for these tips. Number 10 is my favorite because with other software you’re able to expand your creativity.

@CraftingwithDelonda 2 месяца назад

You're welcome and I totally agree with that.

@patinahendricks 2 месяца назад

Hi Delonda I need to watch this again so I can write these down. But the tip about the acronyms and the last one was helpful for me. Thank you so much for all the tips.

@CraftingwithDelonda 2 месяца назад

Wonderful!

@tesacurrie4460 2 месяца назад

Thanks for sharing all the tips and tricks....My favorite was tip #2...I would have been lost if you hadn't given that tip. All the tips were helpful, I appreciate them all.

@CraftingwithDelonda 2 месяца назад

You are so welcome!

@Babs23322 2 месяца назад

Thank You for all of your videos and knowledge. It is always helpful to see tips and tricks even though you might already know them. I like working with Silhouette software, but I don’t like cutting with the silhouette machine. I work sometimes with both cricut and silhouette.

@CraftingwithDelonda 2 месяца назад

The great thing is having options ❤

@karenscraftcorner12 2 месяца назад

I would like to say thank you for the info. For me it would be the different types of vinyl and the Cricut mat.

@CraftingwithDelonda 2 месяца назад

Awesome! I’m glad you found it helpful ❤

@kristenpineda1836 2 месяца назад

Oh my goodness the labeling!!! This is so true! I have all of this puff and there are times I cannot tell it apart from others. People-LABEL IMMEDIATELY!! ❤

@CraftingwithDelonda 2 месяца назад

That's one of my biggest regrets.

@karlathomas67 2 месяца назад

Tip # 10 was very helpful 😊

@CraftingwithDelonda 2 месяца назад

Awesome! You can do it.

@govnfirsthan5373 2 месяца назад

Great tips and advice. Thanks for sharing your wisdom with us.

@CraftingwithDelonda 2 месяца назад

Glad it was helpful!

@PepamintBroussard 2 месяца назад

Thank you so much for the tips❤❤❤

@CraftingwithDelonda 2 месяца назад

You are so welcome!

@donnatappan4087 2 месяца назад

Thanks for sharing, good idea

@CraftingwithDelonda 2 месяца назад

Thank you ❤️

@marickarice2129 2 месяца назад

These were great tips. Especially #10. I love my Cricut Maker, but Cricut Design Space is hit or miss some days. I just started learning Canva and I like it.

@CraftingwithDelonda 2 месяца назад

Thank you so much ❤ I’m so glad you are open to learning how to use other software.

@jasmincapers242 2 месяца назад

Thank you for sharing 🥰🥰 because of past videos I'm for sure following what you say. I've labeled everything!!

@CraftingwithDelonda 2 месяца назад

Thank you ❤

@Valleygirl4lifeCreations 2 месяца назад

Definitely a great video as usual ❤.. I would love to know how to get the Cricut mat to stay sticky so the vinyl can still stick to it, if it’s possible to fix it (how to clean the mat)😀

@latonyawade-willis1256 2 месяца назад

I found the entire video helpful!!!!

@CraftingwithDelonda 2 месяца назад

Thank you so much ❤️

@mrs.parker5195 2 месяца назад

Thank you Delonda for these informative tips! I needed this

@CraftingwithDelonda 2 месяца назад

Glad it was helpful!

@Hammer500 2 месяца назад

All the Tips are very helpful

@CraftingwithDelonda 2 месяца назад

Thank you ❤️

@peterford3450 2 месяца назад

This is going to help a lot of people.

@CraftingwithDelonda 2 месяца назад

Thank you ❤❤❤

@vickiburge4137 2 месяца назад

I need to get in habit of labeling my vinyl.

@CraftingwithDelonda 2 месяца назад

Yes! It's hard to figure out what to do with it when you don't.

@jackiemcglohn7559 2 месяца назад

My favorite tip is, labeling the vinyl.

@CraftingwithDelonda 2 месяца назад

Thank you ❤️

@leshawnte39 2 месяца назад

Great tips

@CraftingwithDelonda 2 месяца назад

Thank you ❤️

@jessiegibson9023 2 месяца назад

Good video thanks great tips ❤

@CraftingwithDelonda 2 месяца назад

You are so welcome!

@designedwithlove617 2 месяца назад

@delonda Thanks for very much I love your videos!

@CraftingwithDelonda 2 месяца назад

Thank you ❤️ I appreciate that.

@teresabrixey6019 2 месяца назад

I use slap bracelets with a label on it. Saves me accidentally getting tape sticky on the vinyl from sitting too long.

@corrier5954 2 месяца назад

Understatement re learning new software. I got Silhouette bus, because you use it for bling, & I am soooo frustrated with it. I will of course keep trying lol thank you

@CraftingwithDelonda 2 месяца назад

Thanks for sharing! Have you taken Patrice's course for beginners?

@corrier5954 2 месяца назад

@@CraftingwithDelonda no I try to do as much as can on own, esp since have to watch finances. I craft for self & gifts so only have my retirement $.

@lyndahollins2881 2 месяца назад

Oh boy, I have the same problem with my vinyl. I have drawers for HTV, Glitter HTV and Puff HTV now. and one drawer for regular vinyl. some I have no idea what brand it is.

@CraftingwithDelonda 2 месяца назад

Same! Now, I label right away.

@lindaheidecket3597 2 месяца назад

Did not know the right or wrong way to place the cricut cover protector. I did label some of mine but they probably are on the wrong side. lol Also yes labeling those vinyl rolls is helpful I also roll up the cover page and stick it inside the tube if it has a cover page.

@CraftingwithDelonda 2 месяца назад

Thank you ❤️

@katalynasexton933 2 месяца назад

😊great ideas

@CraftingwithDelonda 2 месяца назад

Thank you ❤️

@flossingdebi 2 месяца назад

Delonda I always gleam useful crafting tips from you. Sometimes when I am on Amazon searching for vinyl, some brands describe the vinyl using PU vinyl, do you know what PU stands for? Thanks you

@CraftingwithDelonda 2 месяца назад

Thank you ❤️ PU Vinyl is made with polyurethane and it soft and flexible.

@LaneGrogan 2 месяца назад

I learned this from you!

@CraftingwithDelonda 2 месяца назад

Thank you!

@LaneGrogan 2 месяца назад

@@CraftingwithDelonda You are welcome!

@gwntl7 2 месяца назад

Hello, do u have a tip for how to get printer out of idle mode. My lights were off for three days. when they came back on, printer was in idle mode. I have watch many videos. (2800 series). I love your videos. most of what I learn is from your videos. Thank You

@CraftingwithDelonda 2 месяца назад

Hi there and thank you. I haven't seen idle mode on any of my printers. What happens when you press any of the buttons?

@gwntl7 2 месяца назад

@@CraftingwithDelonda nothing happens when I push the buttons. I’ve uninstalled from my laptop installed, and I still get idle.. Thank you so much for responding. I do appreciate you keep making those great videos.

@monarnyc 2 месяца назад

Have made some designs in Canva. But don't know how to cut it out with my Cricut. But give me time I will learn.

@louisemcclain6189 2 месяца назад

Hello Delonda and everyone

@CraftingwithDelonda 2 месяца назад

Hi there!

@tawanabridges6645 2 месяца назад

I have a question if you measure something at 5 3/4 width is that what you put in cricut design space as 5.34 or do you find the decimal for 5 3/4 i mess up so much vinyl trying to get the right size

@bonniem3567 2 месяца назад

I wrote with permanent marker what each grip mat cuts to help with the mat cover going on right and, so I know which one I need to grab to cut what I am working with that day. :)

@CraftingwithDelonda 2 месяца назад

That's a great idea!

@lorichapman6232 2 месяца назад

Did you say...follow on Cricut Design Space, please explain how. Thank you

@CraftingwithDelonda 2 месяца назад

Yes, or you can click the link in the pinned comment.

@MsNeneDesigns 2 месяца назад

Marking the cutting mat. I'm always trying to figure with side was correct way.

@CraftingwithDelonda 2 месяца назад

I am so glad it was helpful.

@mrs.parker5195 2 месяца назад

Good evening everyone🙏🏽

@CraftingwithDelonda 2 месяца назад

Hi there!

@AnAstuteLife 2 месяца назад

Do you have a class where you design in Canva and then print and cut in cricut

@CraftingwithDelonda 2 месяца назад

I have only designed water bottles in Canva and printed from Cricut. Here is a link to that tutorial: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--dAj0EyABdY.html