TIPS - Why I Can't use the Thick thread ( T270) on My Sewing Machine

Подписаться 41 тыс.

Просмотров 32 тыс.

50% 1

using a thick thread on my swing machine I show you how you can use it too
Why I Can't use the Thick thread ( T270) on My Sewing Machine
RU-vid English Channel
/ @upholsterytips
PayPal
paypal.me/MECAUpholsteryTips?...
Website
mecaupholsterytips.com/
Messenger:
m.me/mario.ernesto.9803
Facebook group:
/ 1581017731985358
Instagram:
/ mecaupholsterytips
Facebook:
/ mecaautoupholstery
RU-vid:
ru-vid.com_videos?o=U
Flicker:
www.flickr.com/photos/1500930...
Pinterest:
/ pins
THE PURPOSE OF THIS CHANNEL IS NOT TO HIRING OR LOOK FOR EMPLOYEES It is only to give you an idea of how classic cars Interior are made or can be made and how can you repair regulars seats Reupholster headline Install a convertible top Etc.
EL PROPOSITO DE ESTE CANAL NO ES PARA CONTRATAR O BUSCAR EMPLEADOS es solamente para darles una idea de como los interiores de los carros clasicos estan hechos o como los puedes hacer y como puedes reparar los acintos, retapizasr los techos de los carros tambien como puedes instalar las capotas de los convertible
----------- Atentamente: MECA Upholstery Tips

Опубликовано:

12 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@francissalazar2957 6 месяцев назад

I’ve noticed that if you wax the thread and undo it from the spool and wind it again while waxing it and/or use use a thing called magnetic lubricator which is a thing you place on top of the sewing machine and as you see the thread goes through it and is lubricated a little bit ! those 2 simple things also help tremendously

@Birdsnest65 2 месяца назад

Excellent tutorial ! Excellent! Thank you for sharing your knowledge.

@fredpierce9363 5 месяцев назад

Thank you so much. This so good to know and little by little you are removing the magic and mystery of the sewing machine. Really Informative.

@melbay8727 Месяц назад

This was brilliant, it is exactly my problem. I will try to lower and fix it. Thank you so much 🎉

@ChrisJones-kf1li 11 месяцев назад

Man!!! I think I've thrown away like 2 or 3 sewing machines. Thank you soooo much!

@jimbob3708 2 года назад

I feel like this was made just for me. Thank you so much!

@67comet 2 года назад

Thank you for these videos, I've been watching them for a few days, and I really enjoy your work, how you explain it, and the points you emphasis .. good stuff, thank you ..

@TenaciousCovers 2 года назад

Great video. A real neat trick you have shared. Love the videos you make, I’ve learned a lot. Keep up the great work. South Coast UK

@jasonjacks9002 2 года назад

Excellent video on a much needed topic

@Ulanky1 2 года назад

Thank you for sharing! Your videos are very good!

@fordclevelanddaytonacoupe8881 4 месяца назад

Thanks for the video on this! I had to machine down the height of the bearing on my Juki Lu 563 to be able to move the bobbin down. I was still having a tight thread issue after modifying this. So I used 210 thread on the bobbin to give the lower thread more tension, in addition to moving the bobbin down. Worked perfect!

@lesleyhiddins2067 2 года назад

Yep so helpful, thank you

@jackjordan7691 10 месяцев назад

Thank you for your teaching you are a great teacher.

@dansanders4402 Год назад

Excellent explanation! Thanks!

@josephjames4302 Год назад

Wow!!! Thank you so much for sharing your valuable knowledge. This is a game changer for me. God bless you!

@AlexKall Год назад

Very good tip, thank you!

@mikenelson1495 Год назад

Brilliant ! What so many have said it was too much thread for the mechanical parts to handle, turns out to be a bobbin spindle adjustment. Brilliant !

@leonardszymanski5341 Год назад

Thank you for the video

@sochhay 2 года назад

Thank you for sharing this :)

$@ramloganfracic5761$

@ramloganfracic5761 Год назад

The you for sharing your knowledge to the world. Very informative video. I can sense your experience and skills. I repair as well. Viewing from the French island St Martin in the Caribbean. May you continue to prosper in your projects. Blessings

@johng1097 Год назад

Great tip - thanks !

@KingLoopie1 Год назад

Nice tip for me as I take up a new hobby! I'm glad I stumbled on this video... You've earned my sub with this one!

@upholsterytips Год назад

Thanks

@charlescampbell1319 2 года назад

Fantastic👏🏻👏🏻👏🏻

@mogasesegopotje8483 Год назад

You are a boss🤩

@cackleberryfarm4598 Год назад

Thank you for this video. After watching your video of the fancy stitching and the piping in the seat I was curious if an ordinary house sewing machine could do this? I didn't really find an answer on the Internet. So I am very happy you show this!!!

@webchez69 Год назад

Gracias amigo!

@bigfranksworld Год назад

Very good info. I have the same machine, but never though I could use that heavy of thread in my machine. Thank you.

@aaronaffan5132 11 месяцев назад

You cleared up a mystery for me

@TheInkhousecustoms Год назад

Thanks for the video I don't have a consew but it's can help with the info.

@blue32nu Год назад

I had a consew 225 which is basically the 226 without reverse. I sold it and bought a consew 1255 so I could sew with thicker threads with no issue. I kinda wish I kept it, if I had kept experimenting with thread tension. But having a larger bobbin is nice not having to change as frequently

@Doc_Fischer Год назад

The biggest issue that you will run into (with machines NOT originally designed for thicker thread) is the clearance between the presser foot throat plate and the tang from the bobbin case that holds the case from spinning under the throat plate . If you gradually open up that area you will eventually come to a happy medium that will work flawlessly. I have a Consew 226 and a Singer 111w154 . 92 used to be max . After some clearances fixed I can run 270 with a 92 lower . The lower thread issue almost always requires a tension adjustment on the bobbin holder to be proper .

@colossus5752 2 года назад

Goog job👍

@markdaniel6086 7 месяцев назад

Thanks.. very helpful.. having this issue with my 112 w115 Singer. thread sounds like it is pinching there on boath bobbins . It was from a swap meet.. so many things were out of adjustment.. this is the last problem 👍👍

@sunrisetacticalgear2676 2 года назад

Thanks for sharing, I would have adjusted the tension on my bobbin case, and still not get it to run correctly. Keep up your hard work, I enjoy watching and learning from you as I spend my day sewing.

@marcia12gamble Год назад

I found out that a piece of lent will effect the bobbin tention. Thx for these videos. Learning is a life long journey.

@Handles-R-Lame Год назад

@@marcia12gamble Every day we learn something new it seems lol

@philipdevonald1273 2 года назад

Thank you, I am having the same problem with a machine where the bobbin is mounted from the side, I will try the same idea.

@user-zv6bh3dq3u 8 месяцев назад

Thank you so much you saved me from insanity

@YvesFlawinne Год назад

As a beginner i made te mistake thinking i always had to use the same thread in the bobbin as on top. Tried with thinner thread and it worked. I have a Eagle (Typical) GC20606-1 and it handles the thick thread good. did not have to do anything with the bobbin height but my machines allows up to 9 mm stitches so i think it is well adapted for thicker thread.

@patrickreilly988 4 месяца назад

Just resubscribed to all your notifications. I just ordered some 277 thread and will need this info. Your sewing machine educational videos are as good as it gets!

@upholsterytips 4 месяца назад

Thanks

@arhzee3310 2 года назад

You can also shim up the throat plate with thin washers and not have to worry about throwing off the timing.

@philiparcamone7089 3 месяца назад

I tried that and it would not feed the fabric.

@jjaylad Месяц назад

Love your videos! Thanks! You mention you always use the same bobbin thread. Is it always BLACK?

@mda420 Год назад

Be aware when you do this because your hoock maybe worn out and the bobbin case is going to pop out I had issues like that just be careful because when bobbin case pops out it's going to make big scratch to throat plate or needle plate

@geralddombrowski6911 2 года назад

can you do a segmant on changing the length of stitch on my consew 226-r1

@bobstephens9468 Год назад

Briilant

@farahhasan9911 Год назад

How to purchase the speacial top stich foot for juki please guide thanks

@mogasesegopotje8483 Год назад

Do you have a video for side loading?

@piecetoyou8285 5 месяцев назад

What cause the thread to twist fray and snag underneath the work piece also the twisting thread can be seen on top when needle leaves the leather, this s happening on my vintage singer class 7

@aaronanthony100 9 месяцев назад

Hello Mario. I have same sewing machine. Question, when you go back to a thinner thread, is there a need to reverse the process?

@upholsterytips 9 месяцев назад

The B92 thread I use with needles 19 -24 if you are use I needdle 16 to 18 I use a different sewing machine

@aaronaffan5132 9 месяцев назад

Thanks alot

@johngalv9288 4 месяца назад

I have T-135 and T90/Tex92 but stitching is not to my liking. I'll need to do more testing with different needles. Question: is T270 twice as thick as T135? Thanks

@eduubaka8962 2 года назад

I Luv u mehn

@dannybrown9253 Год назад

What do I do if mine is already down as far as it will go?

@jalenjackson9884 3 месяца назад

What size needle are you using

@jaruan2010 2 года назад

I have a Consew 206rb4. My bobbin faces to the side. Can I adjust mines to use this thread?

@jimbob3708 2 года назад

I have a 206RB5, effectively identical machine. They *should* accept the thread, but I'm going to adjust my bobbin holder on the shaft, and I'll get back with you

@jimbob3708 2 года назад

I'm back, ours should be able to use the 270 without that kind of adjustment. I also tried to adjust it.. it's a little different. Mario is exactly right in the video. Our machines just don't adjust that much in that way.

@user-kb3zt4yj5o Год назад

👍🏻👍🏻👍🏻👍🏻👍🏻🎻🎻

@victorduranulloa6987 9 месяцев назад

Me gusta pero lo quiero escuchar en español

@upholsterytips 9 месяцев назад

Tengo un canal de RU-vid en español que cuenta con ese video en total tengo más de 1000 videos públicos

@donfranzini100 Год назад

Good idea …. Your upper tension is threaded incorrectly….. thread shouldn’t go over the post on your tension disks… the post is there only to keep the tension disks from spinning

@derekc423 Год назад

I have seen multiple seasoned experts showing that you should go around the tensioner and go around that post then back, so that is how I have been doing it. But I just took a look at the original manual for my consew 227, and sure enough, you are right, it says the thread should just go between the tensioner disks over the top half and not wrap around at all. I'm thinking the around the post thing must just be some common technique that people use for thread that is too fine to get good tension or just an incorrect method that has spread for some reason.