Tire Sidewall PUNCTURE permanent repair procedure

Подписаться 347 тыс.

Просмотров 1,1 млн

50% 1

Repair a destroyed tire for pennies and make it stronger than new!
PR100 (slightly thicker than PR40 but same stuff): amzn.to/3Lq5IpY
PR40 Rubber Weld 3M: amzn.to/3JGuv8F
Upholstery curved needles for Leather: amzn.to/37Sk9Vi
Nylon Heavy Duty Thread: amzn.to/35dlR2L
Milwaukee Right Angle Die Grinder M12: amzn.to/3utKb9c
USA s30v Pocket Knife I've use daily for years: amzn.to/3tEWHDm
Small Folding Razor Blade Knife I always use: amzn.to/3IFDRAr
Leatherman I've used daily since 2013: amzn.to/36w94cj
YOU CAN BUY A KIT ALREADY PUT TOGETHER(no sewing stuff):
PREMADE Kit with rubber, glue, sandpaper: amzn.to/35bcMr0
********
CANADA GUYS:
Just a heads up the 3M PR40 can be hard to find/expensive in Canada. Any of the 3M PR series glues work just fine and one maybe easier/cheaper to come by(pr40, pr100, pr600, pr1500). The only difference in those glues is the thickness. So with the PR1500 it's more gel like vs water so you will need to make sure to squeeze out the excess.
*********
Thoughts:
Total cost to repair was around 0.50cents of glue. $15 for entire bottle that'll do 30-40 of these large repairs. You can buy a kit(linked above) but I do not know if they have cord reinforced patch material(I don't have anything to do with the company that makes it). I tried for hours to tear this patch off while playing around. I even dropped the pressure from 6.5psi to around 5 to really flex the sidewall and have more contact. I hit rocks, ledges, drove through ice halfway up the rim and high speed turns and nothing harmed it. I inflated it to 30psi before installing just to see if I could stretch/pull the patch off; nope. This is on there permanently and you will destroy the tire before it ever comes off. You could also put a patch on the inside was well or even a typical rubber patch just to make sure air didn't push but I don't think that is necessary. I do think a product like Tire-Ject that I did a video on would be an excellent addition to make these tires bullet proof. Tire-Ject: amzn.to/3JGJ8sI VIDEO on it: • Permanently Fix Flat A...
What I keep in my personal Tire KIT:
Can of carb cleaner
PR40 Glue
Chunk of sidewall with inside pre-sanded
Nylon cord with upholstery needle
Tire Plugs w/rubber cement
12v Air Compressor
FIX:
Bias Ply Tires
Tractor tires
ATV tires
UTV tires
Garden equipment tires
Off Road Tires
Mud Tires
Boeing 747 tyres
The spare tire around your waist
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: www.paypal.com/donate/?hosted...
sixtyfiveford
sixtyfiveford/

Хобби

Опубликовано:

25 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 912

@edwardgabriel5281 Год назад

During WW2, tire rationing meant we had to repair holes. We used "blowout patches" put on the inside with rubber cement and the tube, when pressurized, held the patch against the inside tire wall. When the tire became bald, we regrooved the contact surface. Also, we recapped the tread using heat. I remember the vulcanizing. The tube patches were sometimes vulcanized. The tube patch had a metal dish with a sulfur material held down on the tube with a jig. A match lit the sulfur and the heat melted the patch into the tube. The glue you showed would have been a miracle back then. Also, we took the tire off the rim without removing the wheel. After military service, I came back and worked for The Armstrong Rubber Co. that made All-State tires, too. Tire building from start to finish was very interesting. Loved this You Tube video.

@markcobb6561 Год назад

You weren't changing tires during ww2. At least I'm not the only one that thinks the majority of people stupid.

@Mavrik9000 10 месяцев назад

@@markcobb6561 Some people are in their 90s.

@octavianfie5918 Год назад

Finally somebody who: 1. knows what he's talking about & 2. can articulate what's the whole story about! Thank you!

@themotofixery 2 года назад

Few people are half as handy, skilled and smart as this guy. You can't just buy this kind of intelligence! I'd suggest taking notes. I definitely am!

@sixtyfiveford 2 года назад

Hey Thanks. That's very nice of you to say.

@themotofixery 2 года назад

@sixtyfiveford thank you for making the videos!

@jbj27406 2 года назад

I remember when radial tires came out and that it meant that the reinforcement cords formed radii all the way around the tire, but it never occurred to me what bias ply meant until your explanation. The cords are on the "bias" which means they're at a 90 degree angle to each other and then at a 45 to the radius of the tire. Thanks again for the education. Nice job.

@sixtyfiveford 2 года назад

Thanks, I'm glad you liked it.

@tomtee4442 2 года назад

@@sixtyfiveford This PR 40 works great! What do you clean it with rubbing alcohol? Do you use any primer? Have you used any 3M Black Urthane and Primer? I have some they use to for wind shields, I think motor mounts and more.

@paulrooster2108 Год назад

👍. Man on Cold Morning's it was like you were driving with Square Tires , they would be near flat on the bottom from the car sitting overnite , least how till the tire warmed up in a couple of miles .an the steering was a lil weird as the car sorta swayed back an forth .

@willamstevens1492 Год назад

@@sixtyfiveford q

@mymorristribe 2 года назад

Bro! What? This was straight up genius. Never heard of this glue. As an avid mountain biker running tubeless tires this seems like amazing stuff to keep in my emergency kit for repairs to sidewalls. Please do more videos on this glue. Thanks!

@sixtyfiveford 2 года назад

I didn't even think about Mountain Bike tires. This would work great for those. Take an old bike tire chunk and some glue and you'd be set.

@rronaldreagan 2 года назад

@@sixtyfiveford 1 question: you say the 3m pr40 glue is cheap... In europe its 40€ for a 0.6ounce bottle. Is it cheaper in the US?

@sixtyfiveford 2 года назад

@@rronaldreagan It's $16 usd right now.

@alt3241 Год назад

There are those CO2 cartridge tire pressurization devices for bicycles ( I am still looking for a 90 gram to 20 gram connector converter attachment ) .

@Mavrik9000 10 месяцев назад

@@rronaldreagan It's still $16.

@2LateIWon 2 года назад

Wow that glue is impressive. Great fix. Yeah that would be ashamed to throw away such a good treaded tire.

@sixtyfiveford 2 года назад

Thanks 👍

@Le_Comte_de_Monte_Felin 2 года назад

I have a vision of me sitting beside a dry-rotted tractor tire gluing all the uv-checks together using 3,128 bottles of glue. Great to know for sidewall punctures. I'll have to keep a bottle handy for small ag tires - sometimes just getting the machine back to a flat surface is all ya want to do a repair.

@sixtyfiveford 2 года назад

Heck yeah.

@ronniewilliz153 2 года назад

lol

@5050johnsmith 28 дней назад

U can take scissors to bike tubes and seal dry rott on tractor tirers be back on the field in no time

@Belzon1 2 года назад

Project farm needs to add this to his tire patch test video! Love the video and adding it to the list of things you've recommended!

@ChuckUnderFire 2 года назад

Hands down… this is the best, no nonsense, well explained tire repair video on RU-vid. Thanks for taking the time.

@sixtyfiveford 2 года назад

Hey Thanks.

@JamesJones-rg3dn 2 года назад

Wouldn't it make more sense to patch the tire from the inside so once it's aired up the inner pressure is pushing the patch in place,also you don't have to worry about a rock or some other object tearing the patch off

@ItsMeTyScott 2 года назад

Yes yes it would at least be smart to have something on the inside similarity done

@johnburcaw8670 2 года назад

You could do that once your back home and can break the bead and can get to the inside sidewall. But what he's showing is the best way when your out on the trail

@down2earth838 2 года назад

Almost impossible to break beak on Atv tires when your out in woods. This will get you home and last a long time.

@rustylowe4575 2 года назад

Hard to do in the field plug makes sense in the field

@johnburcaw8670 2 года назад

I would also suggest that when you go to sewl it shut before you put the needle through use the smallest drill bit you can find and pre-drill it so that the needle will go through very easily.

@CPthetooladdict 2 года назад

Pretty slick fix I can imagine this would be a handy repair for rock crawlers they will love this!!

@sixtyfiveford 2 года назад

There's a lot of money lost for offroad damage to these tires.

@jonathansherwood5841 2 года назад

Slick like the chrome on Snap-On wrenches! 🦾Good stuff!

@tannerking2906 2 года назад

Super swamper tires that alot of the guys used to use were bias

@denjhill 2 года назад

Gotta say you provide some of the best information in a simple, straight forward manner. Thanks.

@sixtyfiveford 2 года назад

Hey Thanks.

@oby-1607 2 года назад

When I am out off-roading with my he-man buddies and rip my sidewall. When they ask what I am doing, I will reply " I'm sewing, you got a problem with that?". This almost needs to be a kit you keep on the side-by in case of rock destruction. Anybody who has been doing serious off-road knows all about this. Thanks for the post.

@darrellknox8599 2 года назад

Finally! After 100 years they made a great rubber glue? Awesome! Thanks so much for this Well Explained video. Much love Bro! The Doctor is definitely IN !

@sixtyfiveford 2 года назад

Thanks, I'm glad you liked it.

@alextwfsk8er Месяц назад

The more I watch your channel the more impressed I am by your adaptability and knowledge. That glue looks perfect to repair some torn door weather-stripping I have on a classic car I appreciate the videos thanks!

@sixtyfiveford Месяц назад

Thanks Alex. I'm glad you like them. -Moe

@Mavrik9000 10 месяцев назад

This is a good video! It shows how to fix even a sidewall puncture. If you want to cut out pieces of old tires and get a $15 bottle of 20 grams of adhesive. Also, that 3M product will be my new shoe repair glue.

@corygoins4187 2 года назад

Can’t wait till you do RU-vid full time. I’m always excited when you post a video.

@sixtyfiveford 2 года назад

Thanks Cory, I'm glad you like the videos. -Moe

@BBSE29 2 года назад

Wow the glue is almost invincible I'm very impressed with the bond it makes with the rubber and also nice job patching the tire from the little trail ride you took us on the tire is holding up extremely well thanks for the video.

@sixtyfiveford 2 года назад

Thanks man. I was actually originally investigating this glue as something that would remake rubber to steel motor mounts for generators. It does a fantastic job of mounting rubber to steel.

@JohnJohnson-hk7cj Год назад

Repaired a lot of tyres in my time, mainly motorcycle tyres. Thank you for the tips, and that 3M glue is heading for my toolkit!

@jerryriggins123 2 года назад

3m needs to pay you for this one! I just bought a bottle and now my offroad kit is complete thanks

@arbormac2373 Год назад

Great video thanks for doing it. I am adding this to my kit. I laughed when right after you said you didnt throw the stick in the puddle because you would have to ride home with a muddy puppy and she promptly runs through the puddle on the next throw 😄

@dumbasscountryboy 2 года назад

AWSOME job my friend!! I didn’t know that they made a tire glue that strong 💪 and I’ve been fixing my own tires for years 😂

@sixtyfiveford 2 года назад

It holds stronger than rubber cemented patches.

@JHV166 2 года назад

I am SO GLAD I didnt call you an idiot for trying to patch a sidewall BEFORE I watched this video...THANK YOU FOR MAKING ME SMARTER!

@sixtyfiveford 2 года назад

Hey Thanks.

@martingriffith7824 4 дня назад

Awesome, looking forward to using this on my kubota tires for sidewall damage. Thanks Martin

@juddmuterspaw4081 2 года назад

Moe, you never cease to amaze me with your depth of knowledge in so many different areas! Great job!

@sixtyfiveford 2 года назад

Thanks, I'm glad you liked it.

@williamwarnold6737 2 года назад

I work at tyre’s so I’m very impressed with your bush fix. I must say that glue looks serious glueing power. I’m going to try and track the product down, as I would carry that on the van as a great, get out jail card, for some awkward job, that’s bound to come my way some day . Greetings from Ireland.

@sixtyfiveford 2 года назад

Thanks. I'm glad you like it.

@michaelg4931 Год назад

Thanks for sharing. That's some impressive flexible adhesive. From the 3M product brochure. "3M Scotch-Weld PR1500 clear cyanoacrylate adhesive is compatible with abs, acrylic, cork, fabric, metal, nylon, paper, polyolefin, pvc, rigid foam, rubber, thermoplastic and vinyl materials with a 24 hr cure time. Provides a 1 min fixture time. Delivers great performance with a shear strength of 2800 psi and tensile strength of 2900 psi. Minimum to maximum operating temperatures are -65 F to +180 F."

@rodneybrand8521 2 года назад

We used to call it a boot..but we didn't have 3M PR40 glue..all we had was rubber cement and a C- clamp..it worked for a little while till we got a new tire..don't forget to give Ginger her treat..lol..see you on the next one Cheers 🍺🍺🍺🇺🇸🇺🇸🇺🇸

@sixtyfiveford 2 года назад

I have a spare tire I did a patch/rubber cement boot on years ago. Never had to use it so not sure how long it would have held up.

@scootertuningfl2174 2 года назад

I love your channel because you always tell the fixes no one else tells you about and you save me so much money you are literally the most informative RU-vidr keep it up!

@sixtyfiveford 2 года назад

I appreciate that!

@iFixJunk 2 года назад

For your next video, can you show us how to stitch up a wounded friend on the trail? ...make it quick, if you can. (Asking for a friend.)

@wyattoneable 2 года назад

That was good information about how the radial tires are constructed. That some strong glue!

@sixtyfiveford 2 года назад

Hey thanks.

@jimwilliamson7598 Год назад

I had a side wall cut about 5” long on a backhoe tire side wall. I put 2 conveyor belt joiners across the cut. Then I put about an 8” boot on the inside. It lasted for years.

@chrischappell7117 2 года назад

Great video again. I appreciate the explanation of why car sidewalls cannot be repaired, many times in the past I have asked the tire shops why and they never had any explanation but now your explanation makes sense. That looks like a great idea to fix the sidewalls of off road tires. Thank you.

@sixtyfiveford 2 года назад

Hey Thanks.

@tenncutt 2 года назад

I did 13 plugs once! Good video! Bet this would work with RC (radio control) tire glue sold in hobby shops. Its awesome stuff. Would probably work good on Zero Turn rear tires too, thats what I had 13 plugs in.

@richardpalko8062 2 месяца назад

Thanks for revealing the 3M adhesive - Totally Awesome 😊

@alborgdenmark26 Год назад

This is so cool.....like the part of the story that your father taught you. Yeah, and amazing that this glue can fix 747 tyres.....ha ha....and the spare around your waist too...Thanks for the info & chuckle.

@CantKillMe 2 года назад

nice repair there but if it was me I would put the patch inside the tire and put a flat patch on the out side but keep up the cool videos

@timw5406 2 года назад

Placing the patch on the inside would be the better way to go. But with a low pressure atv tire the patch on the outside will probably be fine.

@sixtyfiveford 2 года назад

Absolutely. This is meant for a trail repair to get you back up an going. Even in the shop I would suspect this 10 minute exterior repair would easily push to 1.5hours to put the same patch on the inside with mounting, dismounting etc. I could do it easily but most guys don't have access to the tools to even take an ATV tire off the bead let alone on the trail. My instinct would be to put it on the inside but wanted to do it like I would on the trail. I was literally trying for 5 hours to rip this patch off with rocks. A few dozen times I nearly destroyed the tire elsewhere and put a few more dings in the rims.

@oscara.8176 2 года назад

Moe, this channel is pure gold. Thanks for your time good sir.

@royevans7793 2 года назад

Back in 2003 I bought a new ¾ ton pickup. My girlfriend & I had gone somewhere, and when we got back to her house I noticed a big thorn in the sidewall of one of the tires. As the truck was less than 6 months old, I didn't want to have to buy a new tire. I pulled out the thorn, and the tire was leaking. Quickly I grabbed my plugging stuff, and put a plug in. It held, and it remained in the sidewall until the tire was worn out & I had to replace it. I thought I'd have to get a new tire in a few days, but it lasted over a year, and untold miles in rough terrain!

@sixtyfiveford 2 года назад

I've noticed it holds up better on LT Truck tires as they have thicker sidewalls. I did it on a tiny car tire and it lasted for 6 months. Plug ended up just sliding out as I was getting off the freeway. I was able to hear it and pull off into a parking lot before it went fully flat. I figured I got an extra 6 months out of the tire and replaced it. It was dead center in the thinnest part of the sidewall and the constant sidewall flex just allow it to work it's way out. They do sell actually cushion gum tire plugs they will vulcanize to the tire but after cutting up so many tires and seeing how easily they tear by hand it will still make me nervous.

@profesonalantagonist Год назад

WOW ! I’ve never heard of this stuff before. I will buy a bottle or two along with some scrap bias ply sidewall for trail repairs. Thank You for posting this information !

@wotjonsez2560 2 года назад

Excellent video, thank you. I have a mini digger with a small (2 inch) tear in one of the tracks and I have been trying to find a way of repairing it for months so thanks again. Jon

@DR-ip1rh 2 года назад

Quick question/comment: Would this not be better off done on the inside of the tire where it can't be snagged and the air pressure works with you rather than against you?

@glenmel78 2 года назад

Yes, always but its nice to see you can do this technique when you're in a pinch and it'll get you home to repair it properly from the inside.

@BJGlenn-cg3gs Год назад

Awesome glue for tire repair. Haven't seen anyone go to the trouble to make this type repair in a long time. When I was younger, we had to heat vulcanize that type of repair.

@trevorslater2746 Год назад

Now ur showing ur age ,Dad had not vulcanized patches in a metal tiny sorta dish held with a wind up clamp ,light it up and watch it fizzle til burnt out ,rubber was stuck to underneath the patch ,havnt seen them maybe 40 plus yrs

@BJGlenn-cg3gs Год назад

@@trevorslater2746has it been that long? Dang I'm old😕. Oh well, beats the other option. Back then I worked 20 hours a day, now.....that's a nap.😂

@fitzeesfabrications 2 года назад

Had to come back to this one for full details. How I missed this video is beyond me. Planning a long sxs trip this summer and this is a must. Thanks. Great tips.

@sixtyfiveford 2 года назад

Just a heads up the 3M PR40 can be hard to find/expensive in Canada. Any of the 3M PR series glues work just fine and one maybe easier/cheaper to come by(pr40, pr100, pr600, pr1500). The only difference in those glues is the thickness.

@OldSneelock 2 года назад

I learned something new. I had been told that a tire with a hole in the sidewall couldn't be repaired with a plug but never had it explained why. Thanks Great fix on the tire. I hadn’t heard of the 3M PR40 Rubber Weld. I will be buying some. I have had fair success gluing weather checks on mower tires but I used regular super glue. The Rubber Weld should improve the success rate. I also have made orings by cutting a larger ring and gluing it back together to the proper sized. Never had a fail, but the PR40 would be better. I can see having a tire repair kit in the Go To Hell bag. Even through it isn’t recommended for anything other than off road, it will get you to a place where you can get a tire. I would think if I took your idea and cut some patches to carry in the GTH Bag along with the necessary sandpaper and glue that could be done for a lot less than $23.00. 😁😎 You get real popular when someone needs a oddball item that you have available, or a great work around.

@sixtyfiveford 2 года назад

Well said. It's a small bottle and I didn't know how far it would go, but it goes a long way. I was thinking this would work well for those old tractor tires that split. I scrounged up the other stuff and put together a little kit.

@BryanTorok 2 года назад

I've fixed several sidewall punctures and corner (where the tread meets the sidewall) punctures in radial with simple plug kits. Now, these were all small nail or screw holes, generally so small I had a difficult time getting the plug inserted. All the repairs lasted 10s of thousands of miles until the tire was worn out with no problems.

@Eyes0penNoFear 2 года назад

Hopefully you didn't mount that tire on the front?

@BryanTorok 2 года назад

@@Eyes0penNoFear Why would that matter any more than the rear? I think that all the tires I did that on were rear tires.

@Eyes0penNoFear 2 года назад

@@BryanTorok I'd think having a compromised sidewall might increase the chance of a catastrophic blowout.

@BryanTorok 2 года назад

@@Eyes0penNoFear So, I've been told and the tire companies say. But in 50 years of driving, I've never met anyone who actually had it happen to them.

@sixtyfiveford 2 года назад

Honesty I think you're pretty safe if it's only 1 plug on the high side of the sidewall on a truck or LT rated heavier tire. I wouldn't dare "anymore" on a car tire, especially in the dead center where the sidewall is only around 1/8" thick. I had a plug dead center in a small car tire wiggle it's way out after months and probably 5k miles. It just flexed so much and the air pressure behind it finally shot it out. I heard it as I was exiting the freeway and was able to still drive around a mile into a parking lot. On a LT truck tire, on the high side of the sidewall before the steel belts the sidewall quickly gets up to around 1/2" thickness which would hold a plug decent. Now with that, not all plugs are created equal. They do sell plugs that are wrapped with cushion gum(raw uncured rubber) and when used with vulcanizing cement become an actual permanent part of the tire. The tire I tore by hand in the video was a passenger rated tire for a normal mid size car, suv, or small truck and you saw how easily it tears.

@jeffreyhickman3871 9 месяцев назад

That is ONE ☝️ INCREDIBLE tire 🛞 repair 👩‍🔧!! Although I don’t think 🤔 it’s street legal, it sure will save a LOT of ATV tires 🛞, with their service life otherwise cut short. Again, your friend, Jeff.

@ShedTV 2 года назад

I always learn something new from you Moe, thanks for taking the time to share your knowledge.

@BlueEyedColonizer 2 года назад

Man. I've learned alot from your channel. Stuff i would have never believed. Thank you

@sixtyfiveford 2 года назад

Thanks, I'm glad you liked it.

@williamsparks1521 Год назад

I 've got new news for patching the sidewall on a riding awnmower tire. My rear engine Cub Cadet had a sliver of metal stuck into the inside rear tire. Tire is 16 x 6.5 x 8. The hole was about 1/4 inch wide. I took rubbing alcohol and cleaned off the area. I then used JB Weld epoxy on the "slit", putting a small thin layer on it. I let it dry overnight. The tire is fxed. I fixed it yesterday and mowed the lawn this morning. It hasn't loss any air. So try JB Weld epoxy on your next riding lawnmower flat tire on the sidewall. You heard it hear first.

@scubalurefishing Месяц назад

Researching this I also found JB makes has a rubber product called JB weld extreme, have you heard of this? It's available at autozone, thought I might try this as locally available and JB makes a great product too.

@williamsparks1521 Месяц назад

@@scubalurefishing The tire lasted about one year and failed.

@williamsparks1521 Месяц назад

@@scubalurefishing Thanks for the info 👍

@Hipporider Год назад

Fantastic tutorial. Couldn't be better. NO music is especially appreciated!👍👍 Thank you very much 😎🇦🇺

@sixtyfiveford Год назад

Glad you liked it!

@workhardplayhard801 2 года назад

Put a tree thru the sidewall of a jeep tire , big ol' gash too. Luckily it was my spare tire😫 this was never going to hold pressure again. So we filled it with various forest debris everything from rocks dirt , leaves and branches 😆stuffed it like a Thanksgiving turkey. We got back off the mountain and to a highway where I called a tow. If a viewer finds themselves in a similar situation I hope this concept helps ✌️

@SchoolforHackers Год назад

That is hilarious, and I intend to remember it.

@strongandco 2 года назад

That's amazing glue and a brilliant fix.

@sixtyfiveford 2 года назад

Hey Thanks.

@stewartbruce8902 2 года назад

Thank you for your invaluable repair technique that I will put to good use.I have done many sidewall repairs, but thanks to you I will add pr40 to my arsenal. All the best to you and Ginger from New Rochelle N.Y.

@KenMrKLC Год назад

Awesome stuff my man..... These are the types of videos that make RU-vid invaluable for everyone for years to come

@sixtyfiveford Год назад

Thanks man

@grabir01 2 года назад

Have you tried grinding up rubber into fine grind or dust and only putting in the 3m glue and filling with the rubber grind? A mix of rubber grind and 3M glue?

@sixtyfiveford 2 года назад

I don't think it would have the strength needed to hold a repair together. All of these glues and epoxies have pretty low strength when pulled directly apart. Their strength comes from overlapping two pieces together and then pulling sideways(lap shear). This is the high psi number you'll see on all the bottles of glue/epoxy. Mixing rubber powder/pr40 would fill gaps well though. So maybe if you had a depression under the patch you could put that mixture in. Or maybe for a spot where a chunk of rubber is missing from the sidewall but not really a hole.

@scubalurefishing Месяц назад

Your idea here, great idea for weather checks on old tractor tires at least, thanks!

@jasonhill1520 2 года назад

Moe, thanks again. You ingenuity, and simple approach to things continues to amaze me. I really enjoy you videos.

@sixtyfiveford 2 года назад

Thanks Jason.

@michaelschranz5666 2 года назад

Thanks for the video especially the links. I have an old dunnage bag, used in trains to keep loads from shifting. Ripped it trying to lift a work barge ,no one does vulcanizeing anymore this should work perfectly. Thanks again and God bless you and yours

@job38four10 2 года назад

Two years ago I bought two new front 16" tractor tires because of same kind of side wall hole, I still have the old tires I might try this fix sometime. I tried volcanize patch on inside but the hole ripped bigger to three inches and and failed, I think what I need is that thread you have to stitch it back together but i want a better needle to do it with, thats what you need to show for us, the right needle that will work easy. Now the question is where'd you get that buffing tool????

@donhappel9566 2 года назад

Milwaukee actually sells an M12 tire buffing specific tool but unless that's your pro I can't imagine you'd buy one. His is just a regular M12 die grinder with what looks like a 2" roloc disc.

@sixtyfiveford 2 года назад

Yeah, any right angle die grinder(cordless or pneumatic) with a course grit roloc disc makes short work of rubber removal. You could even chuck it into any drill and do the same. One of my first attempts with sidewall repairs(15-20yrs ago) I put multiple rubber heavy duty cement patches and then a tube inside the tire. It held for a month and then the tube worked it's way out and tore a bigger hole in the process. This PR40 bonds better than any patch I've ever put on and the ability to use old sidewall as patch with reinforcement cords is a huge plus.

@jonathan1427 2 года назад

With the tyre off the rim, you can use an awl to make sewing easier. A leather needle would be good as the broader flat tip slices the material rather than trying to push it aside.

@madcratebuilder 2 года назад

A honest to god tire repair! Thanks for the tip on the 3M glue. I've looked at the sidewall repair "kits" but this is far superior. This a great to get you off the trail if you kill a sidewall.

@sixtyfiveford 2 года назад

Hey Thanks.

@Mish3ab999 2 года назад

This is excellent! Wish I had seen this before I replaced my Load Range E BfG KO2s with a leaking sidewall puncture. Shouldn’t have listened to the tire repair shop and replaced it. Hopefully others will see this video and benefit.

@Bos742 2 года назад

This can’t be used on road tires, no sidewall repair can be done, tire will end up failing and causing an accident

@bobmitchell4532 2 года назад

I have a tire similar to this one with a boot in the side wall. Until I saw this I thought I was going to have to replace the tire.

@ryderczarnecki7491 2 года назад

I had a thumb size stick go thru a tar once .. Used them tar plugs was like dam glad i got home . Bless All Fellow Humans

@TexasScout 2 года назад

Why would you not repair that from the inside?

@seaofredkc 2 года назад

I was thinking the same thing. Or one inside and outside.

@drstyxquack 2 года назад

He probably wanted to prove just how strong his repair is and how well the glue works!

@donhappel9566 2 года назад

Certainly it would be preferable, but as a field fix dismounting and remounting the tire is a tough job. Typically you're be on a trail somewhere miles from anything when you needed this sort of repair. I think he was mostly trying to demonstrate that it was something you could do anywhere, not just in the shop.

@TexasScout 2 года назад

@@donhappel9566 Good point.

@TexasScout 2 года назад

@@drstyxquack Well, he darn sure did that!

@doctoroctos 11 месяцев назад

I used the tireject stuff on my mower tire this weekend. Saved me from buying a new tire. Bought the dog a bone!

@sixtyfiveford 11 месяцев назад

You're awesome. Thanks man.

@Masso1973 2 года назад

I literally learn a new thing from you in every video I watch, impressive. Thanks, I’ll remember all this.

@SchoolforHackers Год назад

You are becoming one of my favorite hackers.

@garyr7027 Год назад

That's some powerful adhesive, heck I can think hundreds of uses for that stuff.

@davidcasper8923 2 года назад

Your "out of the box" engineering is brilliant.

@sixtyfiveford 2 года назад

Thanks David.

@thistledewoutdoors3331 2 года назад

Can't tell you how many times I've regular super glued punctures in all sorts of tires and it held up sometimes for years !!! Definitely adding this stuff to my center console just in case

@josemedeiros007 2 месяца назад

Interesting video, I have done sidewall repairs on radial tires before using a truck tire patch, and have seen video's where the person sewed the cut like you did.

@-Never-bored Год назад

I’m not a mountain biker , I’m a NYC biker and I can’t tell you how many tires I’ve been through. Never thought to patch it like an old pair of jeans. (Or better yet like a surgeon)

@JR-of5hp 2 года назад

Im going on an atv riding trip in a few months. Thanks for the reminder to update my tire repair kit. Great video

@sixtyfiveford 2 года назад

Hey Thanks.

@AlbertLai-qs1dd Год назад

Very good video to show how to fix tyre! It is very practical. I love it very much!!

@jo9732 2 года назад

Man your videos are top notch. So much leaning. Some other you tubers have no business making videos. Thanks for this very educational.

@speedfreak8200 Год назад

Which way are you leaning 🤔

@1029zsz Год назад

After watching this I can’t believe I’ve broken sowing needles on denim jeans before. That thing was a trooper

@Imwright720 2 года назад

I had some one stick a knife in 2 of my tires when I was about 16. They were big monster tires and I saved for them. Of course nobody would fix them. I had them removed and put a big boot -patch used on 18 wheelers on the inside. I put tubes in the 2 tires. I wore them bald without any problem.

@StewsChannel 2 года назад

Cool fix! My brother inlaw bought a brand new Polaris Scrambler when they first brought them out. He unloaded it and drove about a mile before an old culvert hidden in the overgrowth punctured the sidewall. Would have been a good repair for him so that he didn't have to scrub his day of riding and go find a new tire :)

@sixtyfiveford 2 года назад

That's life sometimes. I took my brother's brand new Polaris Trailblazer out and rolled it down a huge hill the second day of him owning it. He gave me crap for a long time and it hurt my pocket book pretty bad to repair it back in the day.

@BrianCooper-lu2oj Год назад

Thanks haven't seen that type of repair in over 40 years.

@Hat6000 Год назад

Really great information, I've discarded an almost new ATV tire due to a sidewall puncture that could have been saved had I known about this. I've ordered the glue from your link. Thanks!

@lowellfunk8974 Год назад

There are tons of radial atv tires out there! I have repaired radial atv tire sidewalls with a bit of cushion gum in the hole and then put a patch on the inside and another one on the outside and it's still there over 10 years later.

@daydreamer77w46 Год назад

I been looking for small lawn tractor tire side split can't find the right replacement tire this looks like it will work THANK YOU SOOO MUCH

@yoonjay3239 Год назад

Thank you for your video. That upholstery needle and the nylon thread are new to me.

@asherdog9248 2 года назад

A couple of more things to add to my overlanding tool kit. Great video.

@sixtyfiveford 2 года назад

Thanks 👍

@tblbaby 2 года назад

Never heard of this stuff, PR40 Rubber Weld 3M Ahhhmazin! More great info Moe.

@sixtyfiveford 2 года назад

It holds amazing.

@fredspindor1624 2 года назад

we had a service station we fixed tires & tires Wish we had the Glue like that Great Video

@sixtyfiveford 2 года назад

It's impressive of how well the bonds

@MJ-iy4fb Год назад

Good video, thanks for posting it. I'm impressed with that side wall repair and the glue you used, looks like it really does work well

@jasondk5127 2 года назад

Your garage looks like mine so much to do do little time! I love that repair, I'm ordering some of that glue today!

@tracycolorado 2 года назад

Thanks just gave me an idea as to fix cracked weatherstripping

@tommybally03 2 года назад

Well this is going to save me on the trails and money! Thank you

@andreslucero8421 2 года назад

I'm always learning something new as a age..! Thank you for making this video and showing me how to do this. This is also good to know because I think something is about to happen in this country that we're all not prepared for. They're will come a time. When there won't be any more stores there won't be any more products to buy off the shelf. Everybody will have to learn how to repair their stuff.

@sixtyfiveford 2 года назад

Thanks, I'm glad you liked it

@CLCIII 2 года назад

Another thing that I never knew about that certainly could have helped me several times in the past. Thanks for the Revelation!

@sixtyfiveford 2 года назад

Hey Thanks.

@johnnicolini2562 2 года назад

That was really great. you’re a smart guy every time I watch your videos I learn something . Thanks

@sixtyfiveford 2 года назад

Hey Thanks.

@dcrog69 2 года назад

Amazon is going to see a bump in sales of pr100,I know I just ordered some. Thanks for showing a better way of patching I've had atv tires with dozens of plugs in them lol.

@MrArcticman69 2 года назад

Pr 40. Thanks for the tip repaired sidewalls plenty wish I had that glue.

@ronniekeener3802 2 года назад

That's awesome brother. Thanks for the tip. Definitely will get me some of that adhesive.

@murphymmc 2 года назад

In this time of hyper inflation and supply chain problems, this is a great fix. I suspect that once a guy does this it'll be the go to option on future repairs

@sixtyfiveford 2 года назад

Thanks, I'm glad you liked it.

@joesinakandid528 2 года назад

WELL NOW YOU'VE DONE IT! 4 days now since you posted this video and I finally found / watched it. Of course I instantly went to the link to buy a small bottle of the PR40 and they are SOLD OUT / BACKORDERED 🥴 . The Wait Begins.

@sixtyfiveford 2 года назад

PR100 (slightly thicker than PR40 but same stuff): amzn.to/3Lq5IpY